[U-Boot] [PATCH v2 9/9] arm: dts: imx7: colibri: add raw NAND support

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
---

Changes in v2: None

 arch/arm/dts/imx7-colibri.dts | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/dts/imx7-colibri.dts b/arch/arm/dts/imx7-colibri.dts
index a2cade762a..dca501be25 100644
--- a/arch/arm/dts/imx7-colibri.dts
+++ b/arch/arm/dts/imx7-colibri.dts
@@ -16,6 +16,15 @@
 	};
 };
 
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	fsl,use-minimum-ecc;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -48,6 +57,25 @@
 };
 
 &iomuxc {
+	pinctrl_gpmi_nand: gpmi-nand-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
+			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
+			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
+			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
+			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
+			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
+			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
+			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
+			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
+			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+		>;
+	};
+
 	pinctrl_i2c4: i2c4-grp {
 		fsl,pins = <
 			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
-- 
2.17.1