[U-Boot] [UBOOT PATCH v2 0/2] mmc: Added Kconfig support to set minimum and maximum frequency of the mmc controller

[Michal Simek]

On 28.2.2018 11:23, Vipul Kumar wrote:
> This series of patch added Kconfig support for
> CONFIG_ZYNQ_SDHCI_MAX_FREQ and CONFIG_ZYNQ_SDHCI_MIN_FREQ and
> set the default values.
> 
> -Changes in V2:
> -Set min. frequency for ep 100KHz
> -Branch: u-boot-microblaze/kconfig
> 
> Vipul Kumar (2):
>   mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ
>   mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MIN_FREQ
> 
>  arch/arm/cpu/armv8/zynqmp/Kconfig  |  3 +++
>  arch/arm/mach-zynq/Kconfig         |  3 +++
>  configs/xilinx_zynqmp_ep_defconfig |  2 ++
>  drivers/mmc/Kconfig                | 13 +++++++++++++
>  drivers/mmc/zynq_sdhci.c           |  4 ----
>  include/configs/xilinx_zynqmp.h    |  3 ---
>  include/configs/xilinx_zynqmp_ep.h |  2 --
>  include/configs/zynq-common.h      |  5 -----
>  8 files changed, 21 insertions(+), 14 deletions(-)
> 

Applied both but I had to fix typos and sync Kconfig descriptions.

Thanks,
Michal