March 2018 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Mar 1 01:15:48 UTC 2018
Ending: Sat Mar 31 23:10:11 UTC 2018
Messages: 2718

• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Ruslan Bilovol
• [U-Boot] Enabling certain CONFIGs generating incomplete/invalid ELF binary   Kameron Larsen
• [U-Boot] [PATCH 2/3] Integrating TCP and wget into u-boot v7   DH at synoia.com
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PATCH v2 13/13] configs: ls1012a: add pfe configuration for LS1012A   Calvin Johnson
• [U-Boot] [PATCH] dm: core: make fixed-clock dt scan live dt compatible   Andy Yan
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Michal Simek
• [U-Boot] [U-Boot, 1/4] fpga: Added Kconfig support for FPGA_SPARTAN3   Michal Simek
• [U-Boot] Regression: gpio: pca953x_gpio: Make live-tree compatible   Mario Six
• [U-Boot] Regression: gpio: pca953x_gpio: Make live-tree compatible   Mario Six
• [U-Boot] [PATCH v3 00/20] Bring NAND support to Nintendo NES Classic   Maxime Ripard
• [U-Boot] Regression: gpio: pca953x_gpio: Make live-tree compatible   Martin Fuzzey
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Lukasz Majewski
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Michal Simek
• [U-Boot] Keymap problem {Scanned}   Göran Lundberg
• [U-Boot] [PATCH] tools/env: allow equal sign as key value separation   Stefan Agner
• [U-Boot] Regression: gpio: pca953x_gpio: Make live-tree compatible   Mario Six
• [U-Boot] [PATCH] gpio: pca953x_gpio: Support label setting from DT   Mario Six
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Ruslan Bilovol
• [U-Boot] [U-Boot, 1/4] fpga: Added Kconfig support for FPGA_SPARTAN3   Tom Rini
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Sam Protsenko
• [U-Boot] [U-Boot, 1/4] fpga: Added Kconfig support for FPGA_SPARTAN3   Michal Simek
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Tom Rini
• [U-Boot] [PATCH] mmc: sdhci: consider SDHCI_QUIRK_NO_HISPD_BIT in host_caps   Hannes Schmelzer
• [U-Boot] [UBOOT PATCH v2 2/2] microblaze: wdt: Added Kconfig support for CONFIG_XILINX_TB_WATCHDOG   Michal Simek
• [U-Boot] [UBOOT PATCH v2 1/2] microblaze: Added Kconfig support for CONFIG_XILINX_GPIO   Michal Simek
• [U-Boot] [UBOOT PATCH v2 0/2] mmc: Added Kconfig support to set minimum and maximum frequency of the mmc controller   Michal Simek
• [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1   Michal Simek
• [U-Boot] [UBOOT PATCH v2 1/2] eeprom: Enabled eeprom u-boot headers in defconfig   Michal Simek
• [U-Boot] [PATCH] arm: socfpga: gen5: Enabling cache and TLB maintenance broadcast   Marek Vasut
• [U-Boot] [PATCH v2] Kconfig: cmd: Make networking command dependent on NET   Heinrich Schuchardt
• [U-Boot] Regression: gpio: pca953x_gpio: Make live-tree compatible   Martin Fuzzey
• [U-Boot] [PATCH] usb: dwc2: Allow selection of data buffer size   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [GIT PULL] Xilinx Kconfig changes for v2018.03   Michal Simek
• [U-Boot] U-Boot   Mariano Coromac
• [U-Boot] [GIT PULL] Xilinx Kconfig changes for v2018.03   Tom Rini
• [U-Boot] [PATCH 01/13] ARM: rmobile: Add R8A77965 M3N IDs   Marek Vasut
• [U-Boot] [PATCH 02/13] clk: renesas: Add R8A77965 M3N entries   Marek Vasut
• [U-Boot] [PATCH 03/13] gpio: rcar: Add R8A77965 M3N entries   Marek Vasut
• [U-Boot] [PATCH 04/13] mmc: uniphier-sd: Add R8A77965 M3N entries   Marek Vasut
• [U-Boot] [PATCH 05/13] net: ravb: Add R8A77965 M3N entries   Marek Vasut
• [U-Boot] [PATCH 06/13] pinctrl: rmobile: Add R8A77965 M3N entries   Marek Vasut
• [U-Boot] [PATCH 07/13] usb: xhci-rcar: Add R8A77965 M3N entries   Marek Vasut
• [U-Boot] [PATCH 08/13] ARM: dts: rmobile: Import R8A77965 M3N DT files from Linux   Marek Vasut
• [U-Boot] [PATCH 09/13] ARM: dts: rmobile: Add RAVB node to R8A77965 M3N DT   Marek Vasut
• [U-Boot] [PATCH 10/13] ARM: dts: rmobile: Add EHCI nodes to R8A77965 M3N DT   Marek Vasut
• [U-Boot] [PATCH 11/13] ARM: dts: rmobile: Add xHCI node to R8A77965 M3N DT   Marek Vasut
• [U-Boot] [PATCH 12/13] ARM: dts: rmobile: Add SDHI nodes to R8A77965 M3N DT   Marek Vasut
• [U-Boot] [PATCH 13/13] ARM: rmobile: Add R8A77965 Salvator-XS board support   Marek Vasut
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Stephen Warren
• [U-Boot] [PATCH 0/3] add inital SF tests   Stephen Warren
• [U-Boot] [PATCH 1/3] test/py: README: fix typo   Stephen Warren
• [U-Boot] [PATCH 2/3] test/py: README: add HOSTNAME to PYTHONPATH   Stephen Warren
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Stephen Warren
• [U-Boot] Building for MIPS on OSX with OpenWRT toolchain   Ward Willats
• [U-Boot] [PATCH v3 00/20] sunxi: sync H3, H5, A64 DTs from mainline Linux   Andre Przywara
• [U-Boot] [PATCH v3 01/20] sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware   Andre Przywara
• [U-Boot] [PATCH v3 02/20] sunxi: gpio: add missing compatible strings   Andre Przywara
• [U-Boot] [PATCH v3 03/20] net: sun8i-emac: support new pinctrl DT bindings   Andre Przywara
• [U-Boot] [PATCH v3 04/20] net: sun8i-emac: add support for new EMAC DT binding   Andre Przywara
• [U-Boot] [PATCH v3 05/20] arm: dts: sunxi: update A64 to new EMAC binding   Andre Przywara
• [U-Boot] [PATCH v3 06/20] arm: dts: sunxi: update H3 to new EMAC binding   Andre Przywara
• [U-Boot] [PATCH v3 07/20] arm: dts: sunxi: update H5 to new EMAC binding   Andre Przywara
• [U-Boot] [PATCH v3 08/20] net: sun8i-emac: remove support for old binding   Andre Przywara
• [U-Boot] [PATCH v3 09/20] sunxi: disable direct MMC environment for 64 bit boards   Andre Przywara
• [U-Boot] [PATCH v3 10/20] sunxi: revert disabling of features   Andre Przywara
• [U-Boot] [PATCH v3 11/20] sunxi: DT: A64: update device tree file for Allwinner A64 SoC   Andre Przywara
• [U-Boot] [PATCH v3 12/20] sunxi: DT: A64: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v3 13/20] Revert: arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0   Andre Przywara
• [U-Boot] [PATCH v3 14/20] sunxi: dts: A64 boards: Use fixed regulator for mmc0   Andre Przywara
• [U-Boot] [PATCH v3 15/20] sunxi: DT: update device tree files for Allwinner H3 and H5 SoCs   Andre Przywara
• [U-Boot] [PATCH v3 16/20] sunxi: DT: H5: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v3 17/20] sunxi: DT: H3: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v3 18/20] sunxi: DT: H3: update libre-cc board .dts file   Andre Przywara
• [U-Boot] [PATCH v3 19/20] sunxi: DT: H2+: update Opi-zero .dts   Andre Przywara
• [U-Boot] [PATCH v3 20/20] sunxi: DT: A64: add proper SoPine baseboard device tree   Andre Przywara
• [U-Boot] [PATCH] mach-stm32: Use default memory map as background region   Vikas Manocha
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PATCH v7 1/4] Integrating TCP and wget into u-boot   DH at synoia.com
• [U-Boot] [PATCH v7 2/4] Integrating TCP and wget into u-boot v7   DH at synoia.com
• [U-Boot] [PATCH v7 3/4] Integrating TCP and wget into u-boot   DH at synoia.com
• [U-Boot] [PATCH v7 4/4] Fixed minor formatting errors.   DH at synoia.com
• [U-Boot] [PATCH 05/13] net: ravb: Add R8A77965 M3N entries   Joe Hershberger
• [U-Boot] [PATCH] mmc: sdhci: consider SDHCI_QUIRK_NO_HISPD_BIT in host_caps   Jaehoon Chung
• [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1   Jaehoon Chung
• [U-Boot] [PATCH] mmc: sdhci: consider SDHCI_QUIRK_NO_HISPD_BIT in host_caps   Hannes Schmelzer
• [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1   Michal Simek
• [U-Boot] [PATCH] mmc: sdhci: consider SDHCI_QUIRK_NO_HISPD_BIT in host_caps   Jaehoon Chung
• [U-Boot] [PATCH] mmc: sdhci: consider SDHCI_QUIRK_NO_HISPD_BIT in host_caps   Hannes Schmelzer
• [U-Boot] [PATCH 04/13] mmc: uniphier-sd: Add R8A77965 M3N entries   Jaehoon Chung
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH] pinctrl: Kconfig: Fix typo   Marek Behún
• [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1   Jaehoon Chung
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Lokesh Vutla
• [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1   Michal Simek
• [U-Boot] [PATCH v2 00/10] Powerpc: mpc8xx: cleanup before migration to DM model   Christophe Leroy
• [U-Boot] [PATCH v2 01/10] powerpc: mpc8xx: initialisation of global data   Christophe Leroy
• [U-Boot] [PATCH v2 02/10] board: MCR3000: replace mtd->priv by mtd_to_nand()   Christophe Leroy
• [U-Boot] [PATCH v2 03/10] board: MCR3000: Increase Monitor size   Christophe Leroy
• [U-Boot] [PATCH v2 04/10] soft_i2c: cleanup - no mpc8xx support   Christophe Leroy
• [U-Boot] [PATCH v2 05/10] boards: MCR3000: cleanup config   Christophe Leroy
• [U-Boot] [PATCH v2 06/10] powerpc: mpc8xx: cleaning up watchdog   Christophe Leroy
• [U-Boot] [PATCH v2 07/10] powerpc: mpc8xx: get rid of get_immr()   Christophe Leroy
• [U-Boot] [PATCH v2 08/10] powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx   Christophe Leroy
• [U-Boot] [PATCH v2 09/10] powerpc: 8xx: get rid of the multiple PVR_ values   Christophe Leroy
• [U-Boot] [PATCH v2 10/10] powerpc: mpc8xx: refactorise reginfo   Christophe Leroy
• [U-Boot] [PATCH] spi: Zap mpc8xx_spi driver   Christophe LEROY
• [U-Boot] Question related to flash organisation   Christophe LEROY
• [U-Boot] [PATCH v2 1/2] mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE   Hannes Schmelzer
• [U-Boot] [PATCH v2 2/2] mmc: zynq_sdhci: use correct quirk if CONFIG_ZYNQ_HISPD_BROKEN is defined   Hannes Schmelzer
• [U-Boot] Kernel panic - not syncing: VFS: Unable to mount rootfs on unknown-block (1, 0)   Stefano Babic
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Göran Lundberg
• [U-Boot] Building for MIPS on OSX with OpenWRT toolchain   Daniel Schwierzeck
• [U-Boot] [PATCH] Makefile: always preserve output for images that can contain HAB Blocks   Rasmus Villemoes
• [U-Boot] [PATCH] dm: i2c: implement gpio-based I2C deblock   Alexander Kochetkov
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Lukasz Majewski
• [U-Boot] [PATCH v2 0/9] splash screen on the stm32f746 disco board   yannick fertre
• [U-Boot] [PATCH v2 1/9] video: stm32: stm32_ltdc: add reset   yannick fertre
• [U-Boot] [PATCH v2 2/9] video: stm32: stm32_ltdc: update file header & footer   yannick fertre
• [U-Boot] [PATCH v2 3/9] video: stm32: stm32_ltdc: set rate of the pixel clock   yannick fertre
• [U-Boot] [PATCH v2 4/9] video: stm32: stm32_ltdc: missing set of line interrupt position   yannick fertre
• [U-Boot] [PATCH v2 5/9] video: stm32: stm32_ltdc: set the blending factor   yannick fertre
• [U-Boot] [PATCH v2 6/9] arm: dts: stm32: add ltdc for STM32F746   yannick fertre
• [U-Boot] [PATCH v2 7/9] arm: dts: stm32: add display for STM32F746 disco board   yannick fertre
• [U-Boot] [PATCH v2 8/9] stm32f7: board: add splash screen   yannick fertre
• [U-Boot] [PATCH v2 9/9] board: Add display to STM32F746 SoC discovery board   yannick fertre
• [U-Boot] [PATCH] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   yannick fertre
• [U-Boot] [PATCH v2 01/10] video: stm32: stm32_ltdc: add bridge to display controller   yannick fertre
• [U-Boot] [PATCH v2 02/10] video: stm32: stm32_ltdc: update debug log   yannick fertre
• [U-Boot] [PATCH v2 03/10] video: add support of MIPI DSI interface   yannick fertre
• [U-Boot] [PATCH v2 04/10] video: add support of panel OTM8009A   yannick fertre
• [U-Boot] [PATCH v2 05/10] video: add MIPI DSI host controller bridge   yannick fertre
• [U-Boot] [PATCH v2 06/10] video: add support of STM32 MIPI DSI controller driver   yannick fertre
• [U-Boot] [PATCH v2 07/10] video: add support of panel rm68200   yannick fertre
• [U-Boot] [PATCH v2 08/10] arm: dts: stm32: add dsi for STM32F746   yannick fertre
• [U-Boot] [PATCH v2 09/10] arm: dts: stm32: add display for STM32F769 disco board   yannick fertre
• [U-Boot] [PATCH v2 10/10] board: Add STM32F769 SoC, discovery board support   yannick fertre
• [U-Boot] U-Boot   Lothar Waßmann
• [U-Boot] [PATCH v3 09/20] sunxi: disable direct MMC environment for 64 bit boards   Maxime Ripard
• [U-Boot] [PATCH v3 13/20] Revert: arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0   Maxime Ripard
• [U-Boot] [PATCH v3 00/20] sunxi: sync H3, H5, A64 DTs from mainline Linux   Maxime Ripard
• [U-Boot] [PATCH v3 09/20] sunxi: disable direct MMC environment for 64 bit boards   Andre Przywara
• [U-Boot] [PATCH v3 13/20] Revert: arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0   Andre Przywara
• [U-Boot] [PATCH] scripts: use CROSS_COMPILE environment variable   Stefan Agner
• [U-Boot] [linux-sunxi] Re: [PATCH v3 13/20] Revert: arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0   Vincent Legoll
• [U-Boot] [PATCH] scripts: use CROSS_COMPILE environment variable   Lukasz Majewski
• [U-Boot] [linux-sunxi] Re: [PATCH v3 13/20] Revert: arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0   Andre Przywara
• [U-Boot] [PATCH] scripts: use CROSS_COMPILE environment variable   Stefan Agner
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Sam Protsenko
• [U-Boot] U-Boot   Nicolas Ferre
• [U-Boot] [PATCH v2 05/10] video: add MIPI DSI host controller bridge   Brian Norris
• [U-Boot] [PATCH v3 0/2] efi_loader: provide new doc/README.efi   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/2] efi_loader: delete doc/README.efi   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/2] efi_loader: provide new doc/README.uefi   Heinrich Schuchardt
• [U-Boot] [PATCH v2 05/10] video: add MIPI DSI host controller bridge   Brian Norris
• [U-Boot] [PATCH 1/1] video: indicate code page of bitmap fonts   Heinrich Schuchardt
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Peter Robinson
• [U-Boot] [PATCH v3 2/2] efi_loader: provide new doc/README.uefi   Leif Lindholm
• [U-Boot] [PATCH 1/1] input: indicate that code page 437 is used   Heinrich Schuchardt
• [U-Boot] Tools build failure when libfdt-devel is installed   Thomas Petazzoni
• [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs   Alexey Brodkin
• [U-Boot] [PATCH] tools: Include U-Boot libfdt headers from their actual path   Paul Kocialkowski
• [U-Boot] usb command missing?   Duncan Hare
• [U-Boot] usb command missing?   Lukasz Majewski
• [U-Boot] Kernel panic - not syncing: VFS: Unable to mount rootfs on unknown-block (1, 0)   Zoran S
• [U-Boot] [RFC v4 00/15] bmips: add bcm6348-enet support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 01/15] dma: move dma_ops to dma-uclass.h   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 02/15] dma: add channels support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 03/15] dma: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 04/15] bmips: bcm6338: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 05/15] bmips: bcm6348: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 06/15] bmips: bcm6358: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 07/15] phy: add support for internal phys   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 08/15] net: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 09/15] bmips: bcm6338: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 10/15] bmips: enable f at st1704 enet support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 11/15] bmips: bcm6348: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 12/15] bmips: enable ct-5361 enet support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 13/15] bmips: bcm6358: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 14/15] bmips: enable hg556a enet support   Álvaro Fernández Rojas
• [U-Boot] [RFC v4 15/15] bmips: enable nb4-ser enet support   Álvaro Fernández Rojas
• [U-Boot] [RFC v3 03/15] dma: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [PATCH 1/1] sunxi: video: mark framebuffer as EFI reserved memory   Heinrich Schuchardt
• [U-Boot] Kernel panic - not syncing: VFS: Unable to mount rootfs on unknown-block (1, 0)   Stefano Babic
• [U-Boot] [PATCH v3 00/11] efi_loader: error handling cmd/bootefi.c   Heinrich Schuchardt
• [U-Boot] [PATCH v3 01/11] efi_loader: efi_smbios_register should have a return value   Heinrich Schuchardt
• [U-Boot] [PATCH v3 02/11] efi_loader: return efi_status_t from efi_gop_register   Heinrich Schuchardt
• [U-Boot] [PATCH v3 03/11] efi_loader: return efi_status_t from efi_net_register   Heinrich Schuchardt
• [U-Boot] [PATCH v3 04/11] efi_loader: consistently return efi_status_t efi_watchdog_register   Heinrich Schuchardt
• [U-Boot] [PATCH v3 05/11] efi_loader: simplify calling efi_init_obj_list   Heinrich Schuchardt
• [U-Boot] [PATCH v3 06/11] efi_loader: exit status for efi_reset_system_init   Heinrich Schuchardt
• [U-Boot] [PATCH v3 07/11] efi_loader: efi_get_time_init should return status code   Heinrich Schuchardt
• [U-Boot] [PATCH v3 08/11] efi_loader: do_bootefi_exec should always return an EFI status code   Heinrich Schuchardt
• [U-Boot] [PATCH v3 09/11] efi_loader: check initialization of EFI subsystem is successful   Heinrich Schuchardt
• [U-Boot] [PATCH v3 10/11] efi_loader: support device tree for bootefi selftest   Heinrich Schuchardt
• [U-Boot] [PATCH v3 11/11] efi_selftest: check installation of the device tree   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: unit test for EFI_SIMPLE_TEXT_INPUT_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: remove deprecated ConsoleControlProtocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: efi_allocate_pages is too restrictive   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: Initial EFI_DEVICE_PATH_UTILITIES_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH v3 13/20] Revert: arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0   Emmanuel Vadot
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PATCH 1/3] test/py: README: fix typo   Liam Beguin
• [U-Boot] [PATCH v2 07/10] powerpc: mpc8xx: get rid of get_immr()   Wolfgang Denk
• [U-Boot] Question related to flash organisation   Wolfgang Denk
• [U-Boot] Question related to flash organisation   Wolfgang Denk
• [U-Boot] [PATCH v3 00/13] LS1012A PFE driver patch series   Calvin Johnson
• [U-Boot] [PATCH v3 01/13] drivers: net: phy: Fix aquantia compilation with DM   Calvin Johnson
• [U-Boot] [PATCH v3 02/13] armv8: fsl-layerscape: Add support of GPIO structure   Calvin Johnson
• [U-Boot] [PATCH v3 03/13] drivers: net: pfe_eth: LS1012A PFE driver introduction   Calvin Johnson
• [U-Boot] [PATCH v3 04/13] drivers: net: pfe_eth: provide pfe commands   Calvin Johnson
• [U-Boot] [PATCH v3 05/13] drivers: net: pfe_eth: LS1012A PFE headers   Calvin Johnson
• [U-Boot] [PATCH v3 06/13] board: freescale: ls1012aqds: enable network support on ls1012aqds   Calvin Johnson
• [U-Boot] [PATCH v3 07/13] board: freescale: ls1012afrdm: enable network support on ls1012afrdm   Calvin Johnson
• [U-Boot] [PATCH v3 08/13] board: freescale: ls1012ardb: enable network support on ls1012ardb   Calvin Johnson
• [U-Boot] [PATCH v3 09/13] board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb   Calvin Johnson
• [U-Boot] [PATCH v3 10/13] armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure   Calvin Johnson
• [U-Boot] [PATCH v3 11/13] armv8: fsl-lsch2: configure pfe's DDR and HDBUS interfaces and ECC   Calvin Johnson
• [U-Boot] [PATCH v3 12/13] armv8: layerscape: csu: enable ns access to PFE registers   Calvin Johnson
• [U-Boot] [PATCH v3 13/13] configs: ls1012a: add pfe configuration for LS1012A   Calvin Johnson
• [U-Boot] [PATCH] scripts: use CROSS_COMPILE environment variable   Stefan Agner
• [U-Boot] [PATCH] scripts: use CROSS_COMPILE environment variable   Lukasz Majewski
• [U-Boot] [PATCH v2] sunxi: move CONFIG_SYS_TEXT_BASE out of defconfigs   Andre Przywara
• [U-Boot] Tools build failure when libfdt-devel is installed   Masahiro Yamada
• [U-Boot] Default boot arguments in case of missing FDT   Udit agarwal
• [U-Boot] [PATCH v2 07/10] powerpc: mpc8xx: get rid of get_immr()   christophe leroy
• [U-Boot] Tools build failure when libfdt-devel is installed   Thomas Petazzoni
• [U-Boot] [PATCH] mx6cuboxi: add support for detecting Revision 1.5 SoMs   Peter Robinson
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Ruslan Bilovol
• [U-Boot] [PATCH] mx6cuboxi: add support for detecting Revision 1.5 SoMs   Fabio Estevam
• [U-Boot] [PATCH v2 07/10] powerpc: mpc8xx: get rid of get_immr()   Wolfgang Denk
• [U-Boot] [PATCH] mx6cuboxi: add support for detecting Revision 1.5 SoMs   Peter Robinson
• [U-Boot] Default boot arguments in case of missing FDT   Udit agarwal
• [U-Boot] [PATCH] libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>   Masahiro Yamada
• [U-Boot] [PATCH v2 07/10] powerpc: mpc8xx: get rid of get_immr()   christophe leroy
• [U-Boot] [PATCH] libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>   christophe leroy
• [U-Boot] [PATCH] MPC8315ERDB: Enable DHCP support   Marek Vasut
• [U-Boot] [PATCH] MPC8315ERDB: Enable DHCP support   Fabio Estevam
• [U-Boot] [PATCH] ti_armv7_omap: Remove comment remnant   Adam Ford
• [U-Boot] [PATCH] omap3_logic: Remove unnecessary undefs   Adam Ford
• [U-Boot] Proper CONFIG_SPL_TEXT_BASE value for OMAP3   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_CONS_INDEX to Kconfig   Adam Ford
• [U-Boot] [PATCH] Configs: various: remove dead defines   Adam Ford
• [U-Boot] [PATCH] ti_omap3_common: Add CONFIG_SYS_NS16550_COMx entries   Adam Ford
• [U-Boot] uboot for ARRIA10 SoC   Spinelli, Claudio (Nokia - US/Murray Hill)
• [U-Boot] [PATCH] scripts/spelling.txt: Sync script with kernel 4.16-rc4   Fabio Estevam
• [U-Boot] [PATCH v2 0/8] add inital SF tests   Liam Beguin
• [U-Boot] [PATCH v2 1/7] spi: spi_flash: do not fail silently on bad user input   Liam Beguin
• [U-Boot] [PATCH v2 2/7] cmd: sf: fix map_physmem check   Liam Beguin
• [U-Boot] [PATCH v2 3/7] test/py: README: fix typo   Liam Beguin
• [U-Boot] [PATCH v2 4/7] test/py: README: add HOSTNAME to PYTHONPATH   Liam Beguin
• [U-Boot] [PATCH v2 5/7] test/py: do not import pytest multiple times   Liam Beguin
• [U-Boot] [PATCH v2 6/7] test/py: add generic CRC32 function   Liam Beguin
• [U-Boot] [PATCH v2 7/7] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PATCH] scripts/spelling.txt: Sync script with kernel 4.16-rc4   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: bring sections into alphabetic order   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] sunxi: video: mark framebuffer as EFI reserved memory   Anatolij Gustschin
• [U-Boot] [PATCH 0/3] add inital SF tests   Michal Simek
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Michal Simek
• [U-Boot] [PATCH v2 1/2] mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE   Michal Simek
• [U-Boot] [PATCH v2 2/2] mmc: zynq_sdhci: use correct quirk if CONFIG_ZYNQ_HISPD_BROKEN is defined   Michal Simek
• [U-Boot] [PATCH] mmc: fix return value check condition   Peng Fan
• [U-Boot] [ALERT] git.denx.de maintenance   Wolfgang Denk
• [U-Boot] [PATCH 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH 2/2] mmc: fsl_esdhc: enable HS400 feature   Peng Fan
• [U-Boot] [PATCH v2 1/2] mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE   Jaehoon Chung
• [U-Boot] [PATCH v2 1/2] mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE   Hannes Schmelzer
• [U-Boot] [PATCH v2 1/2] mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE   Jaehoon Chung
• [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1   Jaehoon Chung
• [U-Boot] [PATCH v10 0/4] Generic firmware loader   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 1/4] spl: Remove static declaration on spl_mmc_find_device function   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 2/4] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 3/4] cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()   tien.fong.chee at intel.com
• [U-Boot] [PATCH v10 4/4] common: Generic firmware loader for file system   tien.fong.chee at intel.com
• [U-Boot] [UBOOT PATCH v2 2/2] arm64: zynqmp: mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI1   Michal Simek
• [U-Boot] [U-Boot, v2] env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it   Faiz Abbas
• [U-Boot] [UBOOT PATCH v2 0/2] spi: Moved spi u-bbot headers to Kconfig   Michal Simek
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Alexander Graf
• [U-Boot] [PATCH] ARM: DTS: Re-sync logicpd-som-lv with Linux 4.16-rc3   Adam Ford
• [U-Boot] [ALERT OFF] git.denx.de maintenance   Wolfgang Denk
• [U-Boot] [PATCH] phy: ti-pip3-phy: Add support for USB3 PHY   Vignesh R
• [U-Boot] [U-Boot, 6/9] pinctrl: rockchip: Add common rockchip pinctrl driver   David Wu
• [U-Boot] [U-Boot, 01/14] net: rockchip: Separate rmii and rgmii speed setup   David Wu
• [U-Boot] [PATCH 0/2] xhci-dwc3: Couple of fixes for USB3 support   Vignesh R
• [U-Boot] [PATCH 1/2] usb: xhci-dwc3: Power on USB PHY before using   Vignesh R
• [U-Boot] [PATCH 2/2] usb: xhci-dwc3: Enable USB3 PHY when available   Vignesh R
• [U-Boot] [U-Boot, 10/14] ARM: dts: rockchip: Enable integrated phy support for rk3229-evb   David Wu
• [U-Boot] [U-Boot, 2/9] ARM: rockchip: rk3188: Remove the pinctrl setup and enable uart at SPL   David Wu
• [U-Boot] [PATCH] ARM: dts: rmobile: Add PHY reset GPIO   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: rmobile: Make PFC and RST available early on Gen2 only   Marek Vasut
• [U-Boot] [PATCH v1 3/6] phy: Add a new driver for OMAP's USB2 PHYs   Vignesh R
• [U-Boot] [PATCH] MPC8315ERDB: Enable DHCP support   Tom Rini
• [U-Boot] [PATCH] MPC8315ERDB: Enable DHCP support   Marek Vasut
• [U-Boot] [PATCH 0/2] xhci-dwc3: Couple of fixes for USB3 support   Marek Vasut
• [U-Boot] boot from micro sd   Mehmet Ali İPİN
• [U-Boot] [ALERT OFF] git.denx.de maintenance   Wolfgang Denk
• [U-Boot] [PATCH 0/5] DW SPI: fixes and improvements   Eugeniy Paltsev
• [U-Boot] [PATCH 1/5] DW SPI: fix tx data loss on FIFO flush   Eugeniy Paltsev
• [U-Boot] [PATCH 2/5] DW SPI: fix transmit only mode   Eugeniy Paltsev
• [U-Boot] [PATCH 3/5] DW SPI: refactor poll_transfer functions   Eugeniy Paltsev
• [U-Boot] [PATCH 4/5] DW SPI: add option to use external gpio for chip select   Eugeniy Paltsev
• [U-Boot] [PATCH 5/5] DW SPI: use 32 bit access instead of 16 and 32 bit mix   Eugeniy Paltsev
• [U-Boot] [PATCH v1 3/6] phy: Add a new driver for OMAP's USB2 PHYs   Jean-Jacques Hiblot
• [U-Boot] [PATCH] Add xxhash hashing support   dunaev at tecon.ru
• [U-Boot] [PATCH] MPC8315ERDB: Enable DHCP support   Tom Rini
• [U-Boot] [PATCH] MPC8315ERDB: Enable DHCP support   Marek Vasut
• [U-Boot] [PATCH 00/16] arm: stm32mp1: add initial support for STM32MP157   Patrick Delaunay
• [U-Boot] [PATCH 01/16] tools/mkimage: add support for STM32 image format   Patrick Delaunay
• [U-Boot] [PATCH 02/16] spl: add SPL_RESET_SUPPORT   Patrick Delaunay
• [U-Boot] [PATCH 03/16] common: add a prototype for mach_cpu_init()   Patrick Delaunay
• [U-Boot] [PATCH 04/16] arm: armv7: solve issue for timer_rate_hz in arch timer   Patrick Delaunay
• [U-Boot] [PATCH 05/16] dm: gpio: Convert stm32f7 driver to livetree   Patrick Delaunay
• [U-Boot] [PATCH 06/16] gpio: stm32f7_gpio: handle node ngpios   Patrick Delaunay
• [U-Boot] [PATCH 07/16] stm32mp: stm32f7_i2c: use calloc instead of kmalloc   Patrick Delaunay
• [U-Boot] [PATCH 08/16] arm: stm32: add new architecture for STM32MP family   Patrick Delaunay
• [U-Boot] [PATCH 09/16] ram: stm32mp1: add driver   Patrick Delaunay
• [U-Boot] [PATCH 10/16] pmic: add stpmu1 support   Patrick Delaunay
• [U-Boot] [PATCH 11/16] pinctrl: stm32: update pincontrol for stmp32mp157   Patrick Delaunay
• [U-Boot] [PATCH 12/16] reset: stm32: adapt driver for stm32mp1   Patrick Delaunay
• [U-Boot] [PATCH 13/16] clk: add driver for stm32mp1   Patrick Delaunay
• [U-Boot] [PATCH 14/16] clk: stm32mp1: add clock tree initialization   Patrick Delaunay
• [U-Boot] [PATCH 15/16] dts: add device tree for STM32MP157C-ED1 board   Patrick Delaunay
• [U-Boot] [PATCH 16/16] board: st: add generic board for STM32MP1 family   Patrick Delaunay
• [U-Boot] [PATCH] Add xxhash hashing support   Tom Rini
• [U-Boot] [PATCH v10 2/4] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()   Tom Rini
• [U-Boot] [PATCH v10 3/4] cmd: ubifs: Factor out some checking codes into cmd_ubifs_mount()   Tom Rini
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Tom Rini
• [U-Boot] LS1043A-RDB GPIO   Joshua Wallace
• [U-Boot] [PATCH] Devboards.de DBM-SoC1 BOARD: Add S line   Tom Rini
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Jonathan Cormer
• [U-Boot] [PATCH 1/2] mmc: add HS400 support   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/1] sunxi: video: mark framebuffer as EFI reserved memory   Heinrich Schuchardt
• [U-Boot] [PATCH] Add xxhash hashing support   Wolfgang Denk
• [U-Boot] [PATCH 00/16] arm: stm32mp1: add initial support for STM32MP157   Vikas Manocha
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Peter Robinson
• [U-Boot] net: tsec: Fix style violations   Joe Hershberger
• [U-Boot] net: tsec: Fix memory leak in error path   Joe Hershberger
• [U-Boot] net: tsec: Make live-tree compatible   Joe Hershberger
• [U-Boot] tools: Include U-Boot libfdt headers from their actual path   Tom Rini
• [U-Boot] libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>   Tom Rini
• [U-Boot] [U-Boot, 1/3] STMicro TPM: Fix potential buffer overruns   Tom Rini
• [U-Boot] [U-Boot, 2/3] Infineon TPM: Fix potential buffer overruns   Tom Rini
• [U-Boot] [U-Boot,3/3] Atmel TPM: Fix potential buffer overruns   Tom Rini
• [U-Boot] spl: Kconfig: Rename SPL_USBETH_SUPPORT to SPL_USB_ETHER to match with the U-boot CONFIG   Tom Rini
• [U-Boot] tools/env: allow equal sign as key value separation   Tom Rini
• [U-Boot] gpio: pca953x_gpio: Support label setting from DT   Tom Rini
• [U-Boot] pinctrl: Kconfig: Fix typo   Tom Rini
• [U-Boot] [U-Boot, 1/1] input: indicate that code page 437 is used   Tom Rini
• [U-Boot] MPC8315ERDB: Enable DHCP support   Tom Rini
• [U-Boot] ti_armv7_omap: Remove comment remnant   Tom Rini
• [U-Boot] omap3_logic: Remove unnecessary undefs   Tom Rini
• [U-Boot] [U-Boot, 1/1] MAINTAINERS: bring sections into alphabetic order   Tom Rini
• [U-Boot] ARM: DTS: Re-sync logicpd-som-lv with Linux 4.16-rc3   Tom Rini
• [U-Boot] scripts/spelling.txt: Sync script with kernel 4.16-rc4   Tom Rini
• [U-Boot] [PATCH] Devboards.de DBM-SoC1 BOARD: Add S line   Tom Rini
• [U-Boot] MPC8315ERDB: Enable DHCP support   Marek Vasut
• [U-Boot] [RFC v3 01/15] dma: move dma_ops to dma-uclass.h   Grygorii Strashko
• [U-Boot] [RFC v4 01/15] dma: move dma_ops to dma-uclass.h   Grygorii Strashko
• [U-Boot] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type   Joe Hershberger
• [U-Boot] cmd: mdio: Fix style violations   Joe Hershberger
• [U-Boot] phy: Fix style violations   Joe Hershberger
• [U-Boot] NET: designware: fix clock enable   Joe Hershberger
• [U-Boot] net: e1000: Fix e1000_igb semaphore handling   Joe Hershberger
• [U-Boot] net: phy: smsc: Add SMSC LAN8741 support   Joe Hershberger
• [U-Boot] net: phy: marvell: Fix style violations   Joe Hershberger
• [U-Boot] [PATCH v5 00/15] bmips: add bcm6348-enet support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 01/15] dma: move dma_ops to dma-uclass.h   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 02/15] dma: add channels support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 03/15] dma: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 04/15] bmips: bcm6338: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 05/15] bmips: bcm6348: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 06/15] bmips: bcm6358: add bcm6348-iudma support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 07/15] phy: add support for internal phys   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 08/15] net: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 09/15] bmips: bcm6338: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 10/15] bmips: enable f at st1704 enet support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 11/15] bmips: bcm6348: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 12/15] bmips: enable ct-5361 enet support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 13/15] bmips: bcm6358: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 14/15] bmips: enable hg556a enet support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 15/15] bmips: enable nb4-ser enet support   Álvaro Fernández Rojas
• [U-Boot] [RFC v3 01/15] dma: move dma_ops to dma-uclass.h   Álvaro Fernández Rojas
• [U-Boot] Whitelist scripting   Adam Ford
• [U-Boot] [PATCH v3 05/13] drivers: net: pfe_eth: LS1012A PFE headers   Joe Hershberger
• [U-Boot] [PATCH v3 06/13] board: freescale: ls1012aqds: enable network support on ls1012aqds   Joe Hershberger
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Ruslan Bilovol
• [U-Boot] [PATCH v3 09/13] board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb   Joe Hershberger
• [U-Boot] [PATCH v3 10/13] armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure   Joe Hershberger
• [U-Boot] [PATCH v3 13/13] configs: ls1012a: add pfe configuration for LS1012A   Joe Hershberger
• [U-Boot] [PATCH] Cleanup Whitelist entries   Adam Ford
• [U-Boot] Default CONFIG_SYS_CBSIZE too low   Tuomas Tynkkynen
• [U-Boot] [PATCH] ARM: qemu-arm: Increase CONFIG_SYS_CBSIZE   Tuomas Tynkkynen
• [U-Boot] U-Boot   Mariano Coromac
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Jon Cormier
• [U-Boot] [PATCH v2 0/9] splash screen on the stm32f746 disco board   Anatolij Gustschin
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] MIPS: Drop unreferenced CONFIG_* defines   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/3] ARM: Drop unreferenced CONFIG_* defines named after SoCs   Tuomas Tynkkynen
• [U-Boot] [PATCH 3/3] ARM: Drop unreferenced CONFIG_* defines named after boards   Tuomas Tynkkynen
• [U-Boot] Whitelist scripting   Tuomas Tynkkynen
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [ANN] U-Boot v2018.03-rc4 released   Tom Rini
• [U-Boot] [PATCH 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH 0/3] clk: at91: add usb and plladiv drivers   Wenyou Yang
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Prabhakar Kushwaha
• [U-Boot] imx: get_ticks in syscounter.c get miscompiled by GCC 6   Yasushi SHOJI
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Jagan Teki
• [U-Boot] uboot for ARRIA10 SoC   Friedrich Daniel
• [U-Boot] [PATCH] core: ofnode: Fix translation for #size-cells == 0   Mario Six
• [U-Boot] [PATCH] treewide: Fix gdsys mail addresses   Mario Six
• [U-Boot] [PATCH 1/2] usb: xhci-dwc3: Power on USB PHY before using   Bin Meng
• [U-Boot] [PATCH 2/2] usb: xhci-dwc3: Enable USB3 PHY when available   Bin Meng
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Patrice CHOTARD
• [U-Boot] U-Boot DHCP/BOOTP for ServerIP env   Ivica Vugrinec
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH] libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>   Paul Kocialkowski
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] usb: xhci-dwc3: Enable USB3 PHY when available   Vignesh R
• [U-Boot] [PATCH v4 0/4] dm: video: Correct color ANSI escape sequence support   Anatolij Gustschin
• [U-Boot] [PATCH] pwm-backlight: make power-supply as option   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] video: indicate code page of bitmap fonts   Anatolij Gustschin
• [U-Boot] [RFC 1/1] dm: video: tegra124: incorrect logical condition   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] sunxi: video: mark framebuffer as EFI reserved memory   Anatolij Gustschin
• [U-Boot] [ANN] U-Boot v2018.03-rc4 released   Peter Robinson
• [U-Boot] [PATCH 1/2] [for v2018.03] ARM: dts: imx6qdl-icore-rqs: Sync usdhc4 node from Linux   Jagan Teki
• [U-Boot] [PATCH 2/2] [for v2018.03] ARM: dts: imx6dl-icore-rqs: Fix to include correct dtsi   Jagan Teki
• [U-Boot] [PATCH v3 00/15] Powerpc: mpc8xx: cleanup before migration to DM model   Christophe Leroy
• [U-Boot] [PATCH v3 01/15] powerpc, 8xx: initialisation global data   Christophe Leroy
• [U-Boot] [PATCH v3 02/15] board, MCR3000: replace mtd->priv by mtd_to_nand()   Christophe Leroy
• [U-Boot] [PATCH v3 03/15] board, MCR3000: Increase Monitor size   Christophe Leroy
• [U-Boot] [PATCH v3 04/15] soft_i2c: cleanup - no mpc8xx support   Christophe Leroy
• [U-Boot] [PATCH v3 05/15] boards: MCR3000: cleanup config   Christophe Leroy
• [U-Boot] [PATCH v3 06/15] powerpc: mpc8xx: cleaning up watchdog   Christophe Leroy
• [U-Boot] [PATCH v3 07/15] powerpc: mpc8xx: make get_immr() independent of CONFIG_8xx   Christophe Leroy
• [U-Boot] [PATCH v3 08/15] powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx   Christophe Leroy
• [U-Boot] [PATCH v3 09/15] powerpc: 8xx: get rid of the multiple PVR_ values   Christophe Leroy
• [U-Boot] [PATCH v3 10/15] powerpc: mpc8xx: refactorise reginfo   Christophe Leroy
• [U-Boot] [PATCH v3 11/15] powerpc: mpc8xx: harmonise initialisation of the immap local pointer   Christophe Leroy
• [U-Boot] [PATCH v3 12/15] powerpc: mpc8xx: remove get_immr() argument   Christophe Leroy
• [U-Boot] [PATCH v3 13/15] powerpc: mpc8xx: use PVR related defines and macros   Christophe Leroy
• [U-Boot] [PATCH v3 14/15] common/env_embedded: allow fine placement of environment object   Christophe Leroy
• [U-Boot] [PATCH v3 15/15] board: MCR3000: Use smaller flash sector for environment   Christophe Leroy
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Jagan Teki
• [U-Boot] [ANN] U-Boot v2018.03-rc4 released   Jonathan Gray
• [U-Boot] imx: get_ticks in syscounter.c get miscompiled by GCC 6   Lothar Waßmann
• [U-Boot] [PATCH v3b 15/15] board: MCR3000: Use smaller flash sector for environment   Christophe Leroy
• [U-Boot] [PATCH v3b 15/15] board: MCR3000: Use smaller flash sector for environment   Christophe LEROY
• [U-Boot] [ANN] U-Boot v2018.03-rc4 released   Peter Robinson
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Jonathan Gray
• [U-Boot] [ANN] U-Boot v2018.03-rc4 released   Fabio Estevam
• [U-Boot] imx: get_ticks in syscounter.c get miscompiled by GCC 6   Fabio Estevam
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Alexander Graf
• [U-Boot] [PATCH 0/2] [for 2018.03] RPi: Drain RX queue on setbrg   Alexander Graf
• [U-Boot] [PATCH 1/2] serial_bcm283x_mu: Flush RX queue after setting baud rate   Alexander Graf
• [U-Boot] [PATCH 2/2] bcm283x_pl011: Flush RX queue after setting baud rate   Alexander Graf
• [U-Boot] [PATCH 1/2] [for v2018.03] ARM: dts: imx6qdl-icore-rqs: Sync usdhc4 node from Linux   Fabio Estevam
• [U-Boot] [PATCH 2/2] [for v2018.03] ARM: dts: imx6dl-icore-rqs: Fix to include correct dtsi   Fabio Estevam
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Fabio Estevam
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Jonathan Gray
• [U-Boot] [UBOOT PATCH v2 1/2] eeprom: Enabled eeprom u-boot headers in defconfig   Michal Simek
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Göran Lundberg
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Göran Lundberg
• [U-Boot] [ANN] U-Boot v2018.03-rc4 released   Tom Rini
• [U-Boot] RPi3 Not autobooting from SD-card. {Scanned}   Göran Lundberg
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Jagan Teki
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Fabio Estevam
• [U-Boot] [PATCH 00/16] arm: stm32mp1: add initial support for STM32MP157   Patrick DELAUNAY
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Stefano Babic
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Michael Nazzareno Trimarchi
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Vincent Prince
• [U-Boot] [PATCH] libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>   Tom Rini
• [U-Boot] [PATCH v3 00/13] LS1012A PFE driver patch series   Calvin Johnson
• [U-Boot] [PATCH 1/2] mmc: add HS400 support   Jean-Jacques Hiblot
• [U-Boot] [PATCH 1/2] imx7: Add src_base structure define macro   Eran Matityahu
• [U-Boot] [PATCH 2/2] imx7: spl: Check for Serial Downloader in spl_boot_device   Eran Matityahu
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Jagan Teki
• [U-Boot] imx6: USB SDP failed for u-boot-dtb.img   Vincent Prince
• [U-Boot] [PATCH v5 01/15] dma: move dma_ops to dma-uclass.h   Grygorii Strashko
• [U-Boot] [PATCH] libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>   Masahiro Yamada
• [U-Boot] [U-Boot PATCH v2 0/2] Adds support for secure boot on TCI6630K2L HS devices   Madan Srinivas
• [U-Boot] [U-Boot PATCH v2 1/2] configs: k2l: Updates u-boot env to install secure boot monitor   Madan Srinivas
• [U-Boot] [U-Boot PATCH v2 2/2] defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig   Madan Srinivas
• [U-Boot] [PATCH v3 00/13] LS1012A PFE driver patch series   York Sun
• [U-Boot] [ANN] U-Boot v2018.03-rc4 released   Peter Robinson
• [U-Boot] [PATCH 1/2] mmc: add HS400 support   Simon Glass
• [U-Boot] [PATCH] core: ofnode: Fix translation for #size-cells == 0   Simon Glass
• [U-Boot] [PATCH 03/16] common: add a prototype for mach_cpu_init()   Simon Glass
• [U-Boot] [PATCH 05/16] dm: gpio: Convert stm32f7 driver to livetree   Simon Glass
• [U-Boot] [PATCH v10 4/4] common: Generic firmware loader for file system   Simon Glass
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Simon Glass
• [U-Boot] [PATCH 1/2] spi: omap3: Skip set_mode, set_speed from claim   Jagan Teki
• [U-Boot] [PATCH 2/2][Boards Need to Switch DM] spi: omap3_spi: Full dm conversion   Jagan Teki
• [U-Boot] spi: Zapping non-dm drivers, deadline: v2018.09   Jagan Teki
• [U-Boot] [PATCH v3 00/13] LS1012A PFE driver patch series   Joe Hershberger
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Vikas Manocha
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Anatolij Gustschin
• [U-Boot] [PATCH][[Boards Need to Switch DM] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH RFC 0/2] sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well   Tuomas Tynkkynen
• [U-Boot] [PATCH RFC 1/2] ARM: sunxi: Move u-boot-sunxi-with-spl.bin rule to Makefile   Tuomas Tynkkynen
• [U-Boot] [PATCH RFC 2/2] ARM: sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well   Tuomas Tynkkynen
• [U-Boot] [PATCH v3 06/21] efi: Correct header order in efi_memory   Heinrich Schuchardt
• [U-Boot] [PATCHv2 1/2] dra7xx: Always enable UART1 and UART3 in early_padconf   Tom Rini
• [U-Boot] [PATCHv2 2/2] Convert all of CONFIG_CONS_INDEX to Kconfig   Tom Rini
• [U-Boot] [PATCH 2/2][Boards Need to Switch DM] spi: omap3_spi: Full dm conversion   Adam Ford
• [U-Boot] [PATCH 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board   Lukasz Majewski
• [U-Boot] [PATCH 2/2] boot: script: The boot.scr file for K+P's boards   Lukasz Majewski
• [U-Boot] [RFC 1/1] dm: video: tegra124: incorrect logical condition   Heinrich Schuchardt
• [U-Boot] [PATCH v3 00/13] LS1012A PFE driver patch series   Calvin Johnson
• [U-Boot] [PATCH 1/1] efi_loader: parameter checks for LoadImage   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] scripts/coccinelle: add some more coccinelle tests   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH RFC 0/2] sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well   André Przywara
• [U-Boot] [PATCH RFC 1/2] ARM: sunxi: Move u-boot-sunxi-with-spl.bin rule to Makefile   André Przywara
• [U-Boot] [PATCH RFC 2/2] ARM: sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well   André Przywara
• [U-Boot] [PATCH 1/1] net: mvpp2x: add check after calloc   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: bring sections into alphabetic order   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2][Boards Need to Switch DM] spi: omap3_spi: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v2 1/2] spi: omap3: Skip set_mode, set_speed from claim   Jagan Teki
• [U-Boot] [PATCH v2 2/2][Boards Need to Switch DM] spi: omap3_spi: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH] spi: atcspi200: Drop non-dm code   Jagan Teki
• [U-Boot] [PATCH][Boards Need to Switch DM] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [UBOOT PATCH v3] microblaze: wdt: Added Kconfig support for CONFIG_XILINX_TB_WATCHDOG   Vipul Kumar
• [U-Boot] [PATCHv2 1/2] dra7xx: Always enable UART1 and UART3 in early_padconf   Lokesh Vutla
• [U-Boot] [PATCH][Boards Need to Switch DM] spi: atmel: Full dm conversion   Jagan Teki
• [U-Boot] imx: get_ticks in syscounter.c get miscompiled by GCC 6   Yasushi SHOJI
• [U-Boot] [PATCH v3 1/2] mmc: sdhci: add SDHCI_QUIRK_BROKEN_HISPD_MODE   Hannes Schmelzer
• [U-Boot] [PATCH v3 2/2] mmc: zynq_sdhci: use correct quirk if CONFIG_ZYNQ_HISPD_BROKEN is defined   Hannes Schmelzer
• [U-Boot] [PATCH] spi: atcspi200: Full dm conversion   Andes
• [U-Boot] [PATCH] spi: atcspi200: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH] spi: atcspi200: Full dm conversion   陳建志
• [U-Boot] [PATCH v3 00/20] Bring NAND support to Nintendo NES Classic   Maxime Ripard
• [U-Boot] [PATCH RFC 0/2] sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well   Maxime Ripard
• [U-Boot] [PATCH v2 0/3] xhci-dwc3: Couple of fixes for USB3 support   Vignesh R
• [U-Boot] [PATCH v2 1/3] usb: xhci-dwc3: Power on USB PHY before using   Vignesh R
• [U-Boot] [PATCH v2 2/3] usb: xhci-dwc3: Refractor PHY operations into separate function   Vignesh R
• [U-Boot] [PATCH v2 3/3] ubs: xhci-dwc3: Enable USB3 PHY when available   Vignesh R
• [U-Boot] [PATCH 0/2] This series adds support for gpio-leds "default-state" property. The   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH 1/2] dm: led: Support "default-state" property   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH 2/2] dm: led: auto probe() LEDs with "default-state"   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH 0/4] Add support for BeagleBoard.org PocketBeagle   Jason Kridner
• [U-Boot] [PATCH 1/4] Add support for BeagleBoard.org PocketBeagle   Jason Kridner
• [U-Boot] [PATCH 2/4] am335x_evm: scan more partitions and use uname_r   Jason Kridner
• [U-Boot] [PATCH 3/4] Handle NETCONSOLE and SPL enabled   Jason Kridner
• [U-Boot] [PATCH 4/4] am335x: am335x_evm_usbspl_defconfig: NETCONSOLE   Jason Kridner
• [U-Boot] [PATCH] spi: atcspi200: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v2 2/2][Boards Need to Switch DM] spi: omap3_spi: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] omap3_logic: Enable DM_SPI   Adam Ford
• [U-Boot] [PATCH] omap3_logic: Enable DM_SPI   Jagan Teki
• [U-Boot] [PATCH 1/2] serial_bcm283x_mu: Flush RX queue after setting baud rate   Peter Robinson
• [U-Boot] [PATCH 2/2] bcm283x_pl011: Flush RX queue after setting baud rate   Peter Robinson
• [U-Boot] [PATCH 0/2] [for 2018.03] RPi: Drain RX queue on setbrg   Peter Robinson
• [U-Boot] [PATCH 0/2] [for 2018.03] RPi: Drain RX queue on setbrg   Alexander Graf
• [U-Boot] imx: get_ticks in syscounter.c get miscompiled by GCC 6   Fabio Estevam
• [U-Boot] [PATCH] arm64: zynqmp: nand: Fixed NAND erase issue for size 1GiB or more   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Print the value of pl clocks and wdt clock using clk dump   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Correct EG/EV part detection logic   Michal Simek
• [U-Boot] [PATCH 03/16] common: add a prototype for mach_cpu_init()   Patrick DELAUNAY
• [U-Boot] imx: get_ticks in syscounter.c get miscompiled by GCC 6   Tom Rini
• [U-Boot] [U-Boot PATCH v2 2/2] defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig   Tom Rini
• [U-Boot] [U-Boot PATCH v2 1/2] configs: k2l: Updates u-boot env to install secure boot monitor   Tom Rini
• [U-Boot] [PATCH 1/4] Add support for BeagleBoard.org PocketBeagle   Tom Rini
• [U-Boot] [PATCH 2/4] am335x_evm: scan more partitions and use uname_r   Tom Rini
• [U-Boot] [PATCH 3/4] Handle NETCONSOLE and SPL enabled   Tom Rini
• [U-Boot] [PATCH 4/4] am335x: am335x_evm_usbspl_defconfig: NETCONSOLE   Tom Rini
• [U-Boot] [PATCH v2] common: add a prototype for mach_cpu_init()   Patrick Delaunay
• [U-Boot] [PATCH 1/1] scripts/coccinelle: add some more coccinelle tests   Tom Rini
• [U-Boot] [PATCH] arm64: zynqmp: Remove ep108 board   Michal Simek
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Michal Simek
• [U-Boot] [PATCH v2] common: add a prototype for mach_cpu_init()   Tom Rini
• [U-Boot] [UBOOT PATCH v3] microblaze: wdt: Added Kconfig support for CONFIG_XILINX_TB_WATCHDOG   Michal Simek
• [U-Boot] [U-Boot PATCH v2 2/2] defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig   Andrew F. Davis
• [U-Boot] [PATCH 3/4] Handle NETCONSOLE and SPL enabled   Joe Hershberger
• [U-Boot] [PATCH 1/1] net: mvpp2x: add check after calloc   Joe Hershberger
• [U-Boot] [PATCH v7 4/4] Fixed minor formatting errors.   Joe Hershberger
• [U-Boot] [PATCH v7 2/4] Integrating TCP and wget into u-boot v7   Joe Hershberger
• [U-Boot] Status of Altera Aria 10 in upstream   Jan Kiszka
• [U-Boot] [PATCH v5 07/15] phy: add support for internal phys   Joe Hershberger
• [U-Boot] [PATCH 2/2] bcm283x_pl011: Flush RX queue after setting baud rate   Alexander Graf
• [U-Boot] [PATCH v2 0/2] [for 2018.03] RPi: Drain RX queue on setbrg   Alexander Graf
• [U-Boot] [PATCH v2 1/2] serial_bcm283x_mu: Flush RX queue after setting baud rate   Alexander Graf
• [U-Boot] [PATCH v2 2/2] bcm283x_pl011: Flush RX queue after setting baud rate   Alexander Graf
• [U-Boot] [PATCH v5 02/15] dma: add channels support   Joe Hershberger
• [U-Boot] [PATCH v5 08/15] net: add support for bcm6348-enet   Joe Hershberger
• [U-Boot] [PATCH v1 00/19] More support for Armada 37xx boards   Marek Behún
• [U-Boot] [PATCH v1 01/19] phy: marvell: a3700: Change return type of macro MVEBU_REG   Marek Behún
• [U-Boot] [PATCH v1 02/19] phy: marvell: a3700: Use reg_set16 instead of phy_write16   Marek Behún
• [U-Boot] [PATCH v1 03/19] phy: marvell: a3700: Don't create functional macro for each register   Marek Behún
• [U-Boot] [PATCH v1 04/19] phy: marvell: a3700: Use same timeout for all register polling   Marek Behún
• [U-Boot] [PATCH v1 05/19] phy: marvell: a3700: Use (!ret) instead of (ret == 0)   Marek Behún
• [U-Boot] [PATCH v1 06/19] phy: marvell: a3700: Use reg_set_indirect istead of 2 reg_sets   Marek Behún
• [U-Boot] [PATCH v1 07/19] phy: marvell: a3700: Access USB3 register indirectly on lane 2   Marek Behún
• [U-Boot] [PATCH v1 08/19] phy: marvell: a3700: Set USB3 RX wait depending on ref clock   Marek Behún
• [U-Boot] [PATCH v1 09/19] phy: marvell: a3700: revise the USB3 comphy setting during power on   Marek Behún
• [U-Boot] [PATCH v1 10/19] phy: marvell: mux: Support nontrivial node order in selector register   Marek Behún
• [U-Boot] [PATCH v1 11/19] phy: marvell: a3700: Use comphy_mux on Armada 37xx.   Marek Behún
• [U-Boot] [PATCH v1 12/19] phy: marvell: a3700: Save/restore selector reg in SGMII init   Marek Behún
• [U-Boot] [PATCH v1 13/19] arm64: mvebu_armada_37xx: Use Armada 37xx pinctrl driver by default   Marek Behún
• [U-Boot] [PATCH v1 14/19] driver: clk: Add support for clocks on Armada 37xx   Marek Behún
• [U-Boot] [PATCH v1 15/19] spi: mvebu_a3700_spi: Use Armada 37xx clk driver for SPI clock frequency   Marek Behún
• [U-Boot] [PATCH v1 16/19] clk: armada-37xx: Support soc_clk_dump   Marek Behún
• [U-Boot] [PATCH v1 17/19] pinctrl: armada-37xx: Fix SB pinctrl groups according to new revision   Marek Behún
• [U-Boot] [PATCH v1 18/19] phy: marvell: core: Cosmetic fixes   Marek Behún
• [U-Boot] [PATCH v1 19/19] net: mvneta: Fix fault when wrong device tree   Marek Behún
• [U-Boot] [PATCH] fs: ext4: Do not print mount fail message when not ext4 filesystem   Marek Behún
• [U-Boot] [PATCH v2] common: add a prototype for mach_cpu_init()   Masahiro Yamada
• [U-Boot] [PATCH] spi: atcspi200: Full dm conversion   陳建志
• [U-Boot] [PATCH] mmc: fix return value check condition   Jaehoon Chung
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Jaehoon Chung
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Marek Vasut
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Jaehoon Chung
• [U-Boot] [PATCH v2 2/3] usb: xhci-dwc3: Refractor PHY operations into separate function   Bin Meng
• [U-Boot] [PATCH v2 3/3] ubs: xhci-dwc3: Enable USB3 PHY when available   Bin Meng
• [U-Boot] [PATCH] imx: syscounter: make sure asm is volatile   Yasushi SHOJI
• [U-Boot] [PATCH v8 1/3] Adding TCP and wget into u-boot   DH at synoia.com
• [U-Boot] [PATCH v8 2/3] Adding TCP   DH at synoia.com
• [U-Boot] [PATCH v8 3/3] Adding wget   DH at synoia.com
• [U-Boot] [PATCH v10 4/4] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Patrick Brünn
• [U-Boot] [PATCH] tools/mkimage: Use proper output parameter in dtc-system call   Stefan Theil
• [U-Boot] [PATCH] arm64: zynqmp: Add support for verifying secure images   Michal Simek
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Patrice CHOTARD
• [U-Boot] [PATCH v4 00/13] LS1012A PFE driver patch series   Calvin Johnson
• [U-Boot] [PATCH v4 01/13] drivers: net: phy: Fix aquantia compilation with DM   Calvin Johnson
• [U-Boot] [PATCH v4 02/13] armv8: fsl-layerscape: Add support of GPIO structure   Calvin Johnson
• [U-Boot] [PATCH v4 03/13] drivers: net: pfe_eth: LS1012A PFE driver introduction   Calvin Johnson
• [U-Boot] [PATCH v4 04/13] drivers: net: pfe_eth: provide pfe commands   Calvin Johnson
• [U-Boot] [PATCH v4 05/13] drivers: net: pfe_eth: LS1012A PFE headers   Calvin Johnson
• [U-Boot] [PATCH v4 06/13] board: freescale: ls1012aqds: enable network support on ls1012aqds   Calvin Johnson
• [U-Boot] [PATCH v4 07/13] board: freescale: ls1012afrdm: enable network support on ls1012afrdm   Calvin Johnson
• [U-Boot] [PATCH v4 08/13] board: freescale: ls1012ardb: enable network support on ls1012ardb   Calvin Johnson
• [U-Boot] [PATCH v4 09/13] board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb   Calvin Johnson
• [U-Boot] [PATCH v4 10/13] armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure   Calvin Johnson
• [U-Boot] [PATCH v4 11/13] armv8: fsl-lsch2: configure pfe's DDR and HDBUS interfaces and ECC   Calvin Johnson
• [U-Boot] [PATCH v4 12/13] armv8: layerscape: csu: enable ns access to PFE registers   Calvin Johnson
• [U-Boot] [PATCH v4 13/13] configs: ls1012a: add pfe configuration for LS1012A   Calvin Johnson
• [U-Boot] [PATCH v2 1/2] serial_bcm283x_mu: Flush RX queue after setting baud rate   Peter Robinson
• [U-Boot] [PATCH v2 2/2] bcm283x_pl011: Flush RX queue after setting baud rate   Peter Robinson
• [U-Boot] [PATCH 0/2] Add atomic write to fw_setenv for environments on filesystems   Alex Kiernan
• [U-Boot] [PATCH 1/2] tools: env: Refactor write path of flash_io()   Alex Kiernan
• [U-Boot] [PATCH 2/2] tools: env: Implement atomic replace for filesystem   Alex Kiernan
• [U-Boot] [DISCUSSION] Trying to use u-boot 2016.05 with xen 4.4 for jacinto j6 evm board   moin anjnawala
• [U-Boot] [PATCH] arm: socfpga: gen5: Enabling cache and TLB maintenance broadcast   See, Chin Liang
• [U-Boot] [PATCH 1/2] tools: env: Refactor write path of flash_io()   Stefano Babic
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Miquel Raynal
• [U-Boot] [PATCH 01/18] tpm: add Revision ID field in the chip structure   Miquel Raynal
• [U-Boot] [PATCH 02/18] tpm: rename tpm_tis_infineon in tpm_tis_infineon_i2c   Miquel Raynal
• [U-Boot] [PATCH 03/18] tpm: add support for TPMv2 SPI modules   Miquel Raynal
• [U-Boot] [PATCH 04/18] tpm: fix indentation in command list before adding more   Miquel Raynal
• [U-Boot] [PATCH 05/18] tpm: prepare support for TPMv2 commands   Miquel Raynal
• [U-Boot] [PATCH 06/18] tpm: add macros for TPMv2 commands   Miquel Raynal
• [U-Boot] [PATCH 07/18] tpm: add possible traces to analyze buffers returned by the TPM   Miquel Raynal
• [U-Boot] [PATCH 08/18] tpm: handle different buffer sizes   Miquel Raynal
• [U-Boot] [PATCH 09/18] tpm: add TPM2_Startup command support   Miquel Raynal
• [U-Boot] [PATCH 10/18] tpm: add TPM2_SelfTest command support   Miquel Raynal
• [U-Boot] [PATCH 11/18] tpm: add TPM2_Clear command support   Miquel Raynal
• [U-Boot] [PATCH 12/18] tpm: rename the _extend() function to be _pcr_event()   Miquel Raynal
• [U-Boot] [PATCH 13/18] tpm: add TPM2_PCR_Extend command support   Miquel Raynal
• [U-Boot] [PATCH 14/18] tpm: add TPM2_PCR_Read command support   Miquel Raynal
• [U-Boot] [PATCH 15/18] tpm: add TPM2_GetCapability command support   Miquel Raynal
• [U-Boot] [PATCH 16/18] tpm: add dictionary attack mitigation commands support   Miquel Raynal
• [U-Boot] [PATCH 17/18] tpm: add TPM2_HierarchyChangeAuth command support   Miquel Raynal
• [U-Boot] [PATCH 18/18] tpm: add PCR authentication commands support   Miquel Raynal
• [U-Boot] No BOOT_FROM tag build error   Fabio Estevam
• [U-Boot] No BOOT_FROM tag build error   Stefano Babic
• [U-Boot] [PATCH 2/2] tools: env: Implement atomic replace for filesystem   Stefano Babic
• [U-Boot] No BOOT_FROM tag build error   Fabio Estevam
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Tom Rini
• [U-Boot] [PATCH] tools/mkimage: Use proper output parameter in dtc-system call   Tom Rini
• [U-Boot] No BOOT_FROM tag build error   Stefano Babic
• [U-Boot] [PATCH v8 1/3] Adding TCP and wget into u-boot   Joe Hershberger
• [U-Boot] [PATCH v8 2/3] Adding TCP   Joe Hershberger
• [U-Boot] No BOOT_FROM tag build error   Fabio Estevam
• [U-Boot] [PATCH v5 07/15] phy: add support for internal phys   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 02/15] dma: add channels support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 08/15] net: add support for bcm6348-enet   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 1/1] scripts/coccinelle: add some more coccinelle tests   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] Add atomic write to fw_setenv for environments on filesystems   Heinrich Schuchardt
• [U-Boot] [PATCH v5 07/15] phy: add support for internal phys   Joe Hershberger
• [U-Boot] [RFC] ns16550: Add support for AUX regs usage on some ARC SoCs   Simon Glass
• [U-Boot] [PATCH] imximage: Check the IVT offset in the correct location   Fabio Estevam
• [U-Boot] [PATCH] imximage: Check the IVT offset in the correct location   Breno Matheus Lima
• [U-Boot] [PATCH v4 1/1] efi: Correct header order in efi_memory   Heinrich Schuchardt
• [U-Boot] [PATCH] dm: core: make fixed-clock dt scan live dt compatible   Simon Glass
• [U-Boot] [PATCH v10 4/4] common: Generic firmware loader for file system   Simon Glass
• [U-Boot] [PATCH] imximage: Check the IVT offset in the correct location   Stefano Babic
• [U-Boot] [PATCH] arm: socfpga: gen5: Enabling cache and TLB maintenance broadcast   Dinh Nguyen
• [U-Boot] [PATCH 1/1] yaffs2: iterator variable cannot be NULL   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] wandboard: remove superfluous include   Heinrich Schuchardt
• [U-Boot] [PATCH] imximage: Check the IVT offset in the correct location   Troy Kisky
• [U-Boot] [PATCH 2/2] usb: kbd: implement special keys   Heinrich Schuchardt
• [U-Boot] [PATCH] imximage: Check the IVT offset in the correct location   Fabio Estevam
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Wolfgang Denk
• [U-Boot] [PATCH v10 4/4] common: Generic firmware loader for file system   Wolfgang Denk
• [U-Boot] [PATCH v5 02/15] dma: add channels support   Grygorii Strashko
• [U-Boot] [PATCH] imximage: Check the IVT offset in the correct location   Fabio Estevam
• [U-Boot] [PATCH 1/1] wandboard: remove superfluous include   Fabio Estevam
• [U-Boot] [PATCH] armv8: ls1043ardb_sdcard: delete CONFIG_SPL_FSL_LS_PPA   York Sun
• [U-Boot] [PATCH 0/3] ARM: stratix10: initial small patchset   Dinh Nguyen
• [U-Boot] [PATCH 1/3] arm: socfpga: stratix10: Add base address map for Statix10 SoC   Dinh Nguyen
• [U-Boot] [PATCH 2/3] ARM64: stratix10: add reset manager includes   Dinh Nguyen
• [U-Boot] [PATCH 3/3] ARM: dts: stratix10: Add base dtsi and devkit dts   Dinh Nguyen
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Patrick Brünn
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Michal Simek
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Miquel Raynal
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Jaehoon Chung
• [U-Boot] [PATCH v3 13/20] Revert: arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0   Maxime Ripard
• [U-Boot] [PATCH 2/2] tools: env: Implement atomic replace for filesystem   Alex Kiernan
• [U-Boot] imx: get_ticks in syscounter.c get miscompiled by GCC 6   Yasushi SHOJI
• [U-Boot] [PATCH 2/2] tools: env: Implement atomic replace for filesystem   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 2/2] tools: env: Implement atomic replace for filesystem   Alex Kiernan
• [U-Boot] [PULL] Please pull u-boot-imx   Fabio Estevam
• [U-Boot] [PATCH] imx: syscounter: make sure asm is volatile   Fabio Estevam
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v2] imximage: Remove failure when no IVT offset is found   Fabio Estevam
• [U-Boot] [PATCH v3] imximage: Remove failure when no IVT offset is found   Fabio Estevam
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Wolfgang Denk
• [U-Boot] [PULL] Please pull u-boot-imx   Fabio Estevam
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Michal Simek
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Wolfgang Denk
• [U-Boot] [PATCH] imx: syscounter: make sure asm is volatile   Stefano Babic
• [U-Boot] [PATCH v3] imximage: Remove failure when no IVT offset is found   Stefano Babic
• [U-Boot] [PATCH] mx6sabresd: Select the CONFIG_EFI_PARTITION option   Jagan Teki
• [U-Boot] [PULL] [Update] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v2 0/4] Add atomic write to fw_setenv for environments on filesystems   Alex Kiernan
• [U-Boot] [PATCH v2 1/4] tools: env: Pass through indent   Alex Kiernan
• [U-Boot] [PATCH v2 2/4] tools: env: Fix CamelCasing style violation   Alex Kiernan
• [U-Boot] [PATCH v2 3/4] tools: env: Refactor write path of flash_io()   Alex Kiernan
• [U-Boot] [PATCH v2 4/4] tools: env: Implement atomic replace for filesystem   Alex Kiernan
• [U-Boot] [PATCH 2/2] [for v2018.03] ARM: dts: imx6dl-icore-rqs: Fix to include correct dtsi   Jagan Teki
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Tom Rini
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Mark Kettenis
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Michal Simek
• [U-Boot] [PATCH] arm: Disable the strict alignment of data on armv7   Michal Simek
• [U-Boot] [PATCH v2 0/4] Add atomic write to fw_setenv for environments on filesystems   Wolfgang Denk
• [U-Boot] [PATCH 1/1] efi_loader: efi_allocate_pages is too restrictive   Alexander Graf
• [U-Boot] [PATCH v2 0/4] Add atomic write to fw_setenv for environments on filesystems   Alex Kiernan
• [U-Boot] [PATCH 0/3] HAB Fixes for 2018.03-rc4   Bryan O'Donoghue
• [U-Boot] [PATCH 1/3] imx: hab: Fix usage of packed attribute   Bryan O'Donoghue
• [U-Boot] [PATCH 2/3] imx: hab: Make usage of packed attribute consistent   Bryan O'Donoghue
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Bryan O'Donoghue
• [U-Boot] [PATCH 1/1] efi_loader: remove deprecated ConsoleControlProtocol   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: Initial EFI_DEVICE_PATH_UTILITIES_PROTOCOL   Alexander Graf
• [U-Boot] [PATCH] net: Fix netretry condition   Leonid Iziumtsev
• [U-Boot] [PATCH v2] common: add a prototype for mach_cpu_init()   Tom Rini
• [U-Boot] [PATCHv1] board: ge: bx50v3: enable backlight on demand   Sebastian Reichel
• [U-Boot] Cleanup Whitelist entries   Tom Rini
• [U-Boot] [ANN] U-Boot v2018.03-rc4 released   Bryan O'Donoghue
• [U-Boot] [PATCH 1/1] efi_loader: remove deprecated ConsoleControlProtocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] sunxi: video: mark framebuffer as EFI reserved memory   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: efi_allocate_pages is too restrictive   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] serial_bcm283x_mu: Flush RX queue after setting baud rate   Tuomas Tynkkynen
• [U-Boot] [PATCH v2 2/2] bcm283x_pl011: Flush RX queue after setting baud rate   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/1] efi_loader: efi_allocate_pages is too restrictive   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: efi_allocate_pages is too restrictive   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/1] efi_loader: Initial EFI_DEVICE_PATH_UTILITIES_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH v5 00/10] Add new OPTEE bootm support to u-boot   Bryan O'Donoghue
• [U-Boot] [PATCH v5 01/10] optee: Add lib entries for sharing OPTEE code across ports   Bryan O'Donoghue
• [U-Boot] [PATCH v5 02/10] optee: Add CONFIG_OPTEE_TZDRAM_SIZE   Bryan O'Donoghue
• [U-Boot] [PATCH v5 03/10] optee: Add CONFIG_OPTEE_TZDRAM_BASE   Bryan O'Donoghue
• [U-Boot] [PATCH v5 04/10] optee: Add CONFIG_OPTEE_LOAD_ADDR   Bryan O'Donoghue
• [U-Boot] [PATCH v5 05/10] optee: Add optee_image_get_entry_point()   Bryan O'Donoghue
• [U-Boot] [PATCH v5 06/10] optee: Add optee_image_get_load_addr()   Bryan O'Donoghue
• [U-Boot] [PATCH v5 07/10] optee: Add optee_verify_bootm_image()   Bryan O'Donoghue
• [U-Boot] [PATCH v5 08/10] optee: Add error printout   Bryan O'Donoghue
• [U-Boot] [PATCH v5 09/10] image: Add IH_OS_TEE for TEE chain-load boot   Bryan O'Donoghue
• [U-Boot] [PATCH v5 10/10] bootm: optee: Add a bootm command for type IH_OS_TEE   Bryan O'Donoghue
• [U-Boot] [PATCH 1/1] sunxi: video: mark framebuffer as EFI reserved memory   Anatolij Gustschin
• [U-Boot] [PATCH v3] common: add a prototype for mach_cpu_init()   Patrick Delaunay
• [U-Boot] [PATCH 1/1] sunxi: video: mark framebuffer as EFI reserved memory   Anatolij Gustschin
• [U-Boot] hardware versions to Kernel   Andy Rea
• [U-Boot] [PATCH 0/4] imx: hab: Add helper functions for scripted HAB auth   Bryan O'Donoghue
• [U-Boot] [PATCH 1/4] imx: hab: Add routine to set HAB IVT address   Bryan O'Donoghue
• [U-Boot] [PATCH 2/4] imx: hab: Encase majority of header in __ASSEMBLY__ declaration   Bryan O'Donoghue
• [U-Boot] [PATCH 3/4] imx: hab: Specify IVT padding size   Bryan O'Donoghue
• [U-Boot] [PATCH 4/4] imx: hab: Provide hab_auth_img_or_fail command   Bryan O'Donoghue
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Marek Vasut
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Marek Vasut
• [U-Boot] ARM: qemu-arm: Increase CONFIG_SYS_CBSIZE   Tom Rini
• [U-Boot] [U-Boot,1/3] MIPS: Drop unreferenced CONFIG_* defines   Tom Rini
• [U-Boot] [U-Boot, 2/3] ARM: Drop unreferenced CONFIG_* defines named after SoCs   Tom Rini
• [U-Boot] [U-Boot, 3/3] ARM: Drop unreferenced CONFIG_* defines named after boards   Tom Rini
• [U-Boot] treewide: Fix gdsys mail addresses   Tom Rini
• [U-Boot] [U-Boot, 1/1] MAINTAINERS: bring sections into alphabetic order   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] serial_bcm283x_mu: Flush RX queue after setting baud rate   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] bcm283x_pl011: Flush RX queue after setting baud rate   Tom Rini
• [U-Boot] fs: ext4: Do not print mount fail message when not ext4 filesystem   Tom Rini
• [U-Boot] tools/mkimage: Use proper output parameter in dtc-system call   Tom Rini
• [U-Boot] [U-Boot, v2, 1/1] scripts/coccinelle: add some more coccinelle tests   Tom Rini
• [U-Boot] [U-Boot,1/1] yaffs2: iterator variable cannot be NULL   Tom Rini
• [U-Boot] [PATCH v5 02/15] dma: add channels support   Álvaro Fernández Rojas
• [U-Boot] [PULL] [Update] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PULL] [Update] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 1/3] imx: hab: Fix usage of packed attribute   Fabio Estevam
• [U-Boot] [PATCH 2/3] imx: hab: Make usage of packed attribute consistent   Fabio Estevam
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Fabio Estevam
• [U-Boot] [PULL] [Update] Please pull u-boot-imx   Fabio Estevam
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Breno Matheus Lima
• [U-Boot] [PATCH 1/5] net: fec_mxc: Fix DM driver issue in recv   Peng Fan
• [U-Boot] [PATCH 2/5] net: fec_mxc: simplify fec_get_miibus   Peng Fan
• [U-Boot] [PATCH 3/5] net: fec: set dev->seq to priv->dev_id   Peng Fan
• [U-Boot] [PATCH 4/5] net: fec: sharing MDIO for two enet controllers   Peng Fan
• [U-Boot] [PATCH 5/5] net: fex_mxc: add i.MX6UL/SX/SL compatible   Peng Fan
• [U-Boot] [PATCH] mx6sabresd: Select the CONFIG_EFI_PARTITION option   Fabio Estevam
• [U-Boot] [PATCH] mx6sabresd: Select the CONFIG_EFI_PARTITION option   Jagan Teki
• [U-Boot] [PATCH 2/4] am335x_evm: scan more partitions and use uname_r   Jason Kridner
• [U-Boot] Firefly Fireprime RK3128 u-boot issue   Tibor Hársszegi
• [U-Boot] [PATCH 2/4] am335x_evm: scan more partitions and use uname_r   Vagrant Cascadian
• [U-Boot] [PATCH] dm: core: make fixed-clock dt scan live dt compatible   Andy Yan
• [U-Boot] [PATCH 1/4] Add support for BeagleBoard.org PocketBeagle   David Summers
• [U-Boot] [PATCH 2/2] [for v2018.03] ARM: dts: imx6dl-icore-rqs: Fix to include correct dtsi   Stefano Babic
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v5 02/15] dma: add channels support   Daniel Schwierzeck
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH v3] common: add a prototype for mach_cpu_init()   Masahiro Yamada
• [U-Boot] hardware versions to Kernel   Chris Packham
• [U-Boot] [PATCH] common: remove unused prototypes   Patrick Delaunay
• [U-Boot] [PATCH] post: remove reference to power functions   Patrick Delaunay
• [U-Boot] [PATCH 0/4] common: move startup function prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH 1/4] common: move board_f.c prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH 2/4] common: move board_init.c prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH 3/4] common: move board_r.c prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH 4/4] common: move board_info.c prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH v2 00/15] arm: stm32mp1: add initial support for STM32MP157   Patrick Delaunay
• [U-Boot] [PATCH v2 01/15] tools/mkimage: add support for STM32 image format   Patrick Delaunay
• [U-Boot] [PATCH v2 02/15] spl: add SPL_RESET_SUPPORT   Patrick Delaunay
• [U-Boot] [PATCH v2 03/15] arm: armv7: solve issue for timer_rate_hz in arch timer   Patrick Delaunay
• [U-Boot] [PATCH v2 04/15] dm: gpio: Convert stm32f7 driver to livetree   Patrick Delaunay
• [U-Boot] [PATCH v2 05/15] gpio: stm32f7_gpio: handle node ngpios   Patrick Delaunay
• [U-Boot] [PATCH v2 06/15] stm32mp: stm32f7_i2c: use calloc instead of kmalloc   Patrick Delaunay
• [U-Boot] [PATCH v2 07/15] arm: stm32: add new architecture for STM32MP family   Patrick Delaunay
• [U-Boot] [PATCH v2 08/15] ram: stm32mp1: add driver   Patrick Delaunay
• [U-Boot] [PATCH v2 09/15] pmic: add stpmu1 support   Patrick Delaunay
• [U-Boot] [PATCH v2 10/15] pinctrl: stm32: update pincontrol for stmp32mp157   Patrick Delaunay
• [U-Boot] [PATCH v2 11/15] reset: stm32: adapt driver for stm32mp1   Patrick Delaunay
• [U-Boot] [PATCH v2 12/15] clk: add driver for stm32mp1   Patrick Delaunay
• [U-Boot] [PATCH v2 13/15] clk: stm32mp1: add clock tree initialization   Patrick Delaunay
• [U-Boot] [PATCH v2 14/15] dts: add device tree for STM32MP157C-ED1 board   Patrick Delaunay
• [U-Boot] [PATCH v2 15/15] board: st: add generic board for STM32MP1 family   Patrick Delaunay
• [U-Boot] [PATCH 1/1] efi_loader: efi_allocate_pages is too restrictive   Alexander Graf
• [U-Boot] [PATCH v3 02/11] efi_loader: return efi_status_t from efi_gop_register   Alexander Graf
• [U-Boot] [PATCH v3 02/11] efi_loader: return efi_status_t from efi_gop_register   Alexander Graf
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Bryan O'Donoghue
• [U-Boot] [PATCH v2] core: ofnode: Fix translation for #size-cells == 0   Mario Six
• [U-Boot] [PATCH v1 0/2] Add pinctrl support for RK3399 I2C[123467]   Klaus Goger
• [U-Boot] [PATCH v1 1/2] rockchip: pinctrl: rk3399: fix GPIO2B1 and GPIO2B2 shift value   Klaus Goger
• [U-Boot] [PATCH v1 2/2] rockchip: pinctrl: rk3399: add support for I2C[123467]   Klaus Goger
• [U-Boot] iminfo and zImages   Andy Rea
• [U-Boot] [PATCH 0/4] common: move startup function prototypes in init.h   Tom Rini
• [U-Boot] iminfo and zImages   Tom Rini
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Tom Rini
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Breno Matheus Lima
• [U-Boot] [PATCH 0/4] common: move startup function prototypes in init.h   Patrick DELAUNAY
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Patrice CHOTARD
• [U-Boot] [PATCH 5/5] efi_selftest: unit test for event groups   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: fix device tree unit test   Heinrich Schuchardt
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Bryan O'Donoghue
• [U-Boot] [PATCH] Serial port related patches   Yubo Zhi
• [U-Boot] [PATCH 5/5] efi_selftest: unit test for event groups   Alexander Graf
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Fabio Estevam
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Fabio Estevam
• [U-Boot] [PATCH v3 05/21] efi: Add a TODO to efi_init_obj_list()   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/1] efi: Add a TODO to efi_init_obj_list()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: ARM FREESCALE IMX: remove invalid path   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: ARM HISILICON: correct maintained path   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: ARM FREESCALE IMX: remove invalid path   Fabio Estevam
• [U-Boot] [PATCH 1/1] MAINTAINERS: FLATTENED DEVICE TREE: correct maintained path   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: ARM SAMSUNG: remove invalid paths   Heinrich Schuchardt
• [U-Boot] [PATCH v3 00/20] Bring NAND support to Nintendo NES Classic   Scott Wood
• [U-Boot] MAINTAINERS ARM ZYNQ(MP)   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: ARM TI: remove invalid paths   Heinrich Schuchardt
• [U-Boot] MAINTAINERS: PPC4XX   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: TI SYSTEM SECURITY: remove invalid file   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/8] add inital SF tests   Liam Beguin
• [U-Boot] [PATCH 1/1] MAINTAINERS: TI SYSTEM SECURITY: remove invalid file   Andrew F. Davis
• [U-Boot] [PATCH v2 00/10] splash screen on the stm32f769 disco board   Vikas Manocha
• [U-Boot] [PATCH] dm: mmc: socfpga: call dwmci_probe()   Jaehoon Chung
• [U-Boot] [PATCH] configs: imx6qdl: Remove imx6qdl_icore_nand_defconfig   Jagan Teki
• [U-Boot] [PATCH] configs: i.MX6: Move USB Manufacturer, VID, PID to Kconfig   Jagan Teki
• [U-Boot] [PATCH][Boards Need to Switch DM] spi: atmel: Full dm conversion   Wenyou Yang
• [U-Boot] Status of Altera Aria 10 in upstream   Friedrich Daniel
• [U-Boot] [PATCH 1/1] MAINTAINERS: ARM TI: remove invalid paths   Lokesh Vutla
• [U-Boot] [PATCH 1/1] MAINTAINERS: ARM TI: remove invalid paths   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] usb: Remove unused ppc4xx EHCI host driver   Stefan Roese
• [U-Boot] [PATCH 2/4] nand: Remove unused ppc4xx NAND driver and references   Stefan Roese
• [U-Boot] [PATCH 3/4] pci: Remove unused ppc4xx variable from struct pci_controller   Stefan Roese
• [U-Boot] [PATCH 4/4] MAINTAINERS: Remove unused ppc4xx entry   Stefan Roese
• [U-Boot] MAINTAINERS: PPC4XX   Stefan Roese
• [U-Boot] [PATCH 1/5] riscv: checkpatch: Fix Macro argument reuse   Andes
• [U-Boot] [PATCH 2/5] riscv: checkpatch: Fix use of volatile   Andes
• [U-Boot] [PATCH 3/5] riscv: checkpatch: Fix alignment should match open parenthesis   Andes
• [U-Boot] [PATCH 4/5] riscv: checkpatch: Fix missing a blank line after declarations   Andes
• [U-Boot] [PATCH 5/5] riscv: checkpatch: Fix static const char * array declarations   Andes
• [U-Boot] [PATCH 1/4] riscv: bootm: Support to boot riscv-linux   Andes
• [U-Boot] [PATCH 2/4] riscv: bootm: Remove ATAGS   Andes
• [U-Boot] [PATCH 3/4] tools: mkimage: Support RISC-V arch   Andes
• [U-Boot] [PATCH 4/4] doc: ae250: Describe riscv-linux booting via u-boot   Andes
• [U-Boot] [PATCH v2 10/10] board: Add STM32F769 SoC, discovery board support   Patrice CHOTARD
• [U-Boot] [PATCH v2 01/10] video: stm32: stm32_ltdc: add bridge to display controller   Patrice CHOTARD
• [U-Boot] Load different DeviceTree based on EEPROM   Chris Obbard
• [U-Boot] [PATCH v2 02/10] video: stm32: stm32_ltdc: update debug log   Patrice CHOTARD
• [U-Boot] [PATCH v2 04/10] video: add support of panel OTM8009A   Patrice CHOTARD
• [U-Boot] [PATCH 3/3] imx: hab: Convert DCD non-NULL error to warning   Stefano Babic
• [U-Boot] [PATCH v2 06/10] video: add support of STM32 MIPI DSI controller driver   Patrice CHOTARD
• [U-Boot] [PATCH v2 07/10] video: add support of panel rm68200   Patrice CHOTARD
• [U-Boot] [PATCH 1/2] drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig   Sriram Dash
• [U-Boot] [PATCH] ppc: Remove orphan xilinx_irq.h file   Michal Simek
• [U-Boot] [PATCH] MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments   Michal Simek
• [U-Boot] MAINTAINERS ARM ZYNQ(MP)   Michal Simek
• [U-Boot] [PATCH 0/2] NXP WaARP7 set serial# from OTP fuses for USB iSerial   Bryan O'Donoghue
• [U-Boot] [PATCH 1/2] warp7: usb: Introduce a get method for serial number   Bryan O'Donoghue
• [U-Boot] [PATCH 2/2] warp7: usb: Set u-boot serial# based on OTP value   Bryan O'Donoghue
• [U-Boot] [U-Boot, 3/3] imx: hab: Convert DCD non-NULL error to warning   Tom Rini
• [U-Boot] [ANN] U-Boot v2018.03 released   Tom Rini
• [U-Boot] [PATCH v2 0/5] common: move startup function prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH v2 1/5] common: move board_f.c prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH v2 2/5] common: move board_init.c prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH v2 3/5] common: move board_r.c prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH v2 4/5] common: move board_info.c prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH v2 5/5] common: move init_helpers.h prototypes in init.h   Patrick Delaunay
• [U-Boot] [PATCH 2/2] warp7: usb: Set u-boot serial# based on OTP value   Fabio Estevam
• [U-Boot] [PATCH] tools: Make kwboot build if HOST_TOOLS_ALL=y   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/2] warp7: usb: Introduce a get method for serial number   Fabio Estevam
• [U-Boot] [PATCH v3 01/20] spl: fix binman_sym output check   Maxime Ripard
• [U-Boot] [PATCH v3 00/20] Bring NAND support to Nintendo NES Classic   Maxime Ripard
• [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board   yannick fertre
• [U-Boot] [PATCH v3 01/10] video: stm32: stm32_ltdc: add bridge to display controller   yannick fertre
• [U-Boot] [PATCH v3 01/10] video: stm32: stm32_ltdc: update debug log   yannick fertre
• [U-Boot] [PATCH v3 02/10] video: add support of MIPI DSI interface   yannick fertre
• [U-Boot] [PATCH v3 02/10] video: stm32: stm32_ltdc: update debug log   yannick fertre
• [U-Boot] [PATCH v3 03/10] video: add support of MIPI DSI interface   yannick fertre
• [U-Boot] [PATCH v3 03/10] video: add support of panel OTM8009A   yannick fertre
• [U-Boot] [PATCH v3 04/10] otm   yannick fertre
• [U-Boot] [PATCH v3 04/10] video: add support of panel OTM8009A   yannick fertre
• [U-Boot] [PATCH v3 05/10] video: add MIPI DSI host controller bridge   yannick fertre
• [U-Boot] [PATCH v3 06/10] video: add support of STM32 MIPI DSI controller driver   yannick fertre
• [U-Boot] [PATCH v3 07/10] video: add support of panel rm68200   yannick fertre
• [U-Boot] [PATCH v3 08/10] arm: dts: stm32: add dsi for STM32F746   yannick fertre
• [U-Boot] [PATCH v3 09/10] arm: dts: stm32: add display for STM32F769 disco board   yannick fertre
• [U-Boot] [PATCH v3 10/10] board: Add STM32F769 SoC, discovery board support   yannick fertre
• [U-Boot] [PATCH v3 10/10] board: Add STM32F769 SoC, discovery board support   Patrice CHOTARD
• [U-Boot] [PATCH] spi: atcspi200: Drop non-dm code   Jagan Teki
• [U-Boot] [PATCH v3 04/10] otm   Patrice CHOTARD
• [U-Boot] [PATCH v2 1/2] spi: omap3: Skip set_mode, set_speed from claim   Jagan Teki
• [U-Boot] [PATCH] arm: sunxi: Move spl spi sunxi code to mach-sunxi   Jagan Teki
• [U-Boot] [PATCH 1/2] warp7: usb: Introduce a get method for serial number   Bryan O'Donoghue
• [U-Boot] [PATCH] omap3_logic: Enable DM_SPI   Jagan Teki
• [U-Boot] [PATCH v3 04/10] otm   Yannick FERTRE
• [U-Boot] [PATCH 1/1] mmc: sunxi: support cd-inverted   Jagan Teki
• [U-Boot] Status of Altera Aria 10 in upstream   Jan Kiszka
• [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command   Jagan Teki
• [U-Boot] [PATCH RFC 1/2] ARM: sunxi: Move u-boot-sunxi-with-spl.bin rule to Makefile   Jagan Teki
• [U-Boot] [PATCH RFC 2/2] ARM: sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well   Jagan Teki
• [U-Boot] [PATCH RFC 0/2] sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well   Jagan Teki
• [U-Boot] [PATCH 0/5] DW SPI: fixes and improvements   Jagan Teki
• [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board   Daniel Vetter
• [U-Boot] [PATCH v3 02/10] video: add support of MIPI DSI interface   Simon Glass
• [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command   Fabio Estevam
• [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command   Jagan Teki
• [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command   Fabio Estevam
• [U-Boot] [PATCH] net: sun8i_emac: Fix PHY initialization   Jagan Teki
• [U-Boot] [PATCH v2 0/3] NXP WaARP7 set serial# from OTP fuses for USB iSerial   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/3] imx: mx7: Fix CONFIG_SERIAL_TAG compilation   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/3] imx: mx7: Add comment to describe OTP TESTER registers   Bryan O'Donoghue
• [U-Boot] [PATCH v2 3/3] warp7: Set u-boot serial# based on OTP value   Bryan O'Donoghue
• [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command   Jagan Teki
• [U-Boot] [PATCH v2 1/3] imx: mx7: Fix CONFIG_SERIAL_TAG compilation   Fabio Estevam
• [U-Boot] [PATCH v2 2/3] imx: mx7: Add comment to describe OTP TESTER registers   Fabio Estevam
• [U-Boot] [PATCH v2 3/3] warp7: Set u-boot serial# based on OTP value   Fabio Estevam
• [U-Boot] [PATCH 1/2] SPI Flash: add support of sst26wf* flash series   Jagan Teki
• [U-Boot] [PATCH v6 00/10] Add new OPTEE bootm support to u-boot   Bryan O'Donoghue
• [U-Boot] [PATCH v6 01/10] optee: Add lib entries for sharing OPTEE code across ports   Bryan O'Donoghue
• [U-Boot] [PATCH v6 02/10] optee: Add CONFIG_OPTEE_TZDRAM_SIZE   Bryan O'Donoghue
• [U-Boot] [PATCH v6 03/10] optee: Add CONFIG_OPTEE_TZDRAM_BASE   Bryan O'Donoghue
• [U-Boot] [PATCH v6 04/10] optee: Add CONFIG_OPTEE_LOAD_ADDR   Bryan O'Donoghue
• [U-Boot] [PATCH v6 05/10] optee: Add optee_image_get_entry_point()   Bryan O'Donoghue
• [U-Boot] [PATCH v6 06/10] optee: Add optee_image_get_load_addr()   Bryan O'Donoghue
• [U-Boot] [PATCH v6 07/10] optee: Add optee_verify_bootm_image()   Bryan O'Donoghue
• [U-Boot] [PATCH v6 08/10] optee: Add error printout   Bryan O'Donoghue
• [U-Boot] [PATCH v6 09/10] image: Add IH_OS_TEE for TEE chain-load boot   Bryan O'Donoghue
• [U-Boot] [PATCH v6 10/10] bootm: optee: Add a bootm command for type IH_OS_TEE   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig   Jagan Teki
• [U-Boot] [PATCH v2 2/3] sunxi: Add A20-SOM204-EVB board   Jagan Teki
• [U-Boot] [PATCH v2 3/3] sunxi: Add A20-SOM204-EVB-eMMC board   Jagan Teki
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC for Bananapi   Heinrich Schuchardt
• [U-Boot] [uboot-snps-arc] Re: [PATCH 1/2] SPI Flash: add support of sst26wf* flash series   Eugeniy Paltsev
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC for Bananapi   Maxime Ripard
• [U-Boot] [PATCH][Boards Need to Switch DM] spi: atmel: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC for Bananapi   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] Changes to Z-turn dts   tossel at gmail.com
• [U-Boot] [PATCH 1/2] ARM: dts: zynq: Update dts for Z-turn board   tossel at gmail.com
• [U-Boot] [PATCH 2/2] ARM: dts: zynq: Rename dts for Z-turn board   tossel at gmail.com
• [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board   Anatolij Gustschin
• [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board   Brian Norris
• [U-Boot] [PATCH 1/2] ARM: dts: zynq: Update dts for Z-turn board   Alexander Graf
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Stephen Warren
• [U-Boot] [PATCH v2 6/7] test/py: add generic CRC32 function   Stephen Warren
• [U-Boot] Please pull u-boot-video/next   Anatolij Gustschin
• [U-Boot] [PATCH v2 7/7] test/py: add spi_flash tests   Stephen Warren
• [U-Boot] [PATCH 1/2] test/py: add MMC/SD block read test   Stephen Warren
• [U-Boot] [PULL] Please pull u-boot-rockchip   Dr. Philipp Tomsich
• [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board   Thierry Reding
• [U-Boot] [PATCH 1/2] test/py: add MMC/SD block read test   Tom Rini
• [U-Boot] [PATCH 3/3] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PATCH v2 7/7] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PULL] Please pull u-boot-rockchip   Tom Rini
• [U-Boot] Please pull u-boot-video/next   Tom Rini
• [U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux   Andre Przywara
• [U-Boot] [PATCH v4 01/19] sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware   Andre Przywara
• [U-Boot] [PATCH v4 02/19] sunxi: gpio: add missing compatible strings   Andre Przywara
• [U-Boot] [PATCH v4 03/19] net: sun8i-emac: support new pinctrl DT bindings   Andre Przywara
• [U-Boot] [PATCH v4 04/19] net: sun8i-emac: add support for new EMAC DT binding   Andre Przywara
• [U-Boot] [PATCH v4 05/19] arm: dts: sunxi: update A64 to new EMAC binding   Andre Przywara
• [U-Boot] [PATCH v4 06/19] arm: dts: sunxi: update H3 to new EMAC binding   Andre Przywara
• [U-Boot] [PATCH v4 07/19] arm: dts: sunxi: update H5 to new EMAC binding   Andre Przywara
• [U-Boot] [PATCH v4 08/19] net: sun8i-emac: remove support for old binding   Andre Przywara
• [U-Boot] [PATCH v4 09/19] sunxi: disable direct MMC environment   Andre Przywara
• [U-Boot] [PATCH v4 10/19] sunxi: revert disabling of features   Andre Przywara
• [U-Boot] [PATCH v4 11/19] Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT"   Andre Przywara
• [U-Boot] [PATCH v4 12/19] sunxi: DT: A64: update device tree file for Allwinner A64 SoC   Andre Przywara
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v4 14/19] sunxi: DT: update device tree files for Allwinner H3 and H5 SoCs   Andre Przywara
• [U-Boot] [PATCH v4 15/19] sunxi: DT: H5: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v4 16/19] sunxi: DT: H3: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v4 17/19] sunxi: DT: H3: update libre-cc board .dts file   Andre Przywara
• [U-Boot] [PATCH v4 18/19] sunxi: DT: H2+: update Opi-zero .dts   Andre Przywara
• [U-Boot] [PATCH v4 19/19] sunxi: DT: A64: add proper SoPine baseboard device tree   Andre Przywara
• [U-Boot] [PATCH v3 0/7] add inital SF tests   Liam Beguin
• [U-Boot] [PATCH v3 1/7] spi: spi_flash: do not fail silently on bad user input   Liam Beguin
• [U-Boot] [PATCH v3 2/7] cmd: sf: fix map_physmem check   Liam Beguin
• [U-Boot] [PATCH v3 3/7] test/py: README: fix typo   Liam Beguin
• [U-Boot] [PATCH v3 4/7] test/py: README: add HOSTNAME to PYTHONPATH   Liam Beguin
• [U-Boot] [PATCH v3 5/7] test/py: do not import pytest multiple times   Liam Beguin
• [U-Boot] [PATCH v3 6/7] test/py: add generic CRC32 function   Liam Beguin
• [U-Boot] [PATCH v3 7/7] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PATCH] efi_loader: Allow width smaller than buffer stride in efi_gop Blt()   Ivan Gorinov
• [U-Boot] [PATCH v2] sunxi: move CONFIG_SYS_TEXT_BASE out of defconfigs   Jagan Teki
• [U-Boot] [PATCH v4 09/19] sunxi: disable direct MMC environment   Maxime Ripard
• [U-Boot] [PATCH v4 11/19] Revert "sunxi: Pine64: temporarily remove extra Pine64 non-plus DT"   Maxime Ripard
• [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command   Stefan Agner
• [U-Boot] [PATCH 1/1] MAINTAINERS: ARM SAMSUNG: remove invalid paths   Minkyu Kang
• [U-Boot] net: fec_mxc: multiple calls to fec_mii_setspeed()   Yasushi SHOJI
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC for Bananapi   Maxime Ripard
• [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board   Lukasz Majewski
• [U-Boot] [PATCH v1 2/2] boot: script: The boot.scr file for K+P's boards   Lukasz Majewski
• [U-Boot] [PATCH] tools: xilinx: Fix zynq/zynqmp image recognition   Michal Simek
• [U-Boot] [U-Boot, v1, 1/2] rockchip: pinctrl: rk3399: fix GPIO2B1 and GPIO2B2 shift value   Philipp Tomsich
• [U-Boot] [U-Boot, v1, 2/2] rockchip: pinctrl: rk3399: add support for I2C[123467]   Philipp Tomsich
• [U-Boot] [PATCH v3 00/11] arm: sunxi: Use proper and meaningful Kconfig entries   Jagan Teki
• [U-Boot] [PATCH v3 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry   Jagan Teki
• [U-Boot] [PATCH v3 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry   Jagan Teki
• [U-Boot] [PATCH v3 03/11] sunxi: Use MFD_SUN6I_PRCM if used   Jagan Teki
• [U-Boot] [PATCH v3 04/11] sunxi: Add SUN8I_RSB kconfig entry   Jagan Teki
• [U-Boot] [PATCH v3 05/11] sunxi: Add PMIC_AXP kconfig entry   Jagan Teki
• [U-Boot] [PATCH v3 06/11] sunxi: add DRAM_SUN6I kconfig   Jagan Teki
• [U-Boot] [PATCH v3 07/11] sunxi: Add DRAM_SUN4I kconfig entry   Jagan Teki
• [U-Boot] [PATCH v3 08/11] sunxi: Add DRAM_SUN9I kconfig entry   Jagan Teki
• [U-Boot] [PATCH v3 09/11] sunxi: Add DRAM_SUN8I_A23 kconfig entry   Jagan Teki
• [U-Boot] [PATCH v3 10/11] sunxi: Add DRAM_SUN8I_A33 kconfig entry   Jagan Teki
• [U-Boot] [PATCH v3 11/11] sunxi: Add DRAM_SUN8I_A83T kconfig entry   Jagan Teki
• [U-Boot] [PATCH 1/2] ARM: dts: zynq: Update dts for Z-turn board   Michal Simek
• [U-Boot] [PATCH 1/2] ARM: dts: zynq: Update dts for Z-turn board   Alexander Graf
• [U-Boot] [PATCH 00/14] at91: Add boards with OF_CONTROL/DM/DM_SPI   Jagan Teki
• [U-Boot] [PATCH 01/14] spi: atmel: Add ifdef for DM_GPIO code   Jagan Teki
• [U-Boot] [PATCH 02/14] at91: gurnard: Enable DM_SPI   Jagan Teki
• [U-Boot] [PATCH 03/14] configs: gurnard: Move CONFIG_ATMEL_SPI to defconfigs   Jagan Teki
• [U-Boot] [PATCH 04/14] at91: taurus: Enable DM_SPI   Jagan Teki
• [U-Boot] [PATCH 05/14] at91: vinco: Enable DM   Jagan Teki
• [U-Boot] [PATCH 06/14] at91: vinco: Add FDT support   Jagan Teki
• [U-Boot] [PATCH 07/14] at91: vinco: Enable DM_SPI   Jagan Teki
• [U-Boot] [PATCH 08/14] at91: ma5d4evk: Enable DM   Jagan Teki
• [U-Boot] [PATCH 09/14] at91: ma5d4evk: Add FDT support   Jagan Teki
• [U-Boot] [PATCH 10/14] at91: ma5d4evk: Enable DM_SPI   Jagan Teki
• [U-Boot] [PATCH 11/14] at91: ma5d4evk: Enable SPL_DM and SPL_OF_CONTROL   Jagan Teki
• [U-Boot] [PATCH 12/14] spi: atmel: Drop non-dm code   Jagan Teki
• [U-Boot] [PATCH 13/14] spi: atmel: Drop atmel_spi.h   Jagan Teki
• [U-Boot] [PATCH 14/14] spi: atmel: default y if DM_SPI && ARCH_AT91   Jagan Teki
• [U-Boot] [PATCH v3 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry   Maxime Ripard
• [U-Boot] [PATCH v3 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry   Maxime Ripard
• [U-Boot] [PATCH v3 03/11] sunxi: Use MFD_SUN6I_PRCM if used   Maxime Ripard
• [U-Boot] [PATCH v3 04/11] sunxi: Add SUN8I_RSB kconfig entry   Maxime Ripard
• [U-Boot] [PATCH v3 05/11] sunxi: Add PMIC_AXP kconfig entry   Maxime Ripard
• [U-Boot] [PATCH v3 06/11] sunxi: add DRAM_SUN6I kconfig   Maxime Ripard
• [U-Boot] [PATCH v3 07/11] sunxi: Add DRAM_SUN4I kconfig entry   Maxime Ripard
• [U-Boot] [PATCH v3 08/11] sunxi: Add DRAM_SUN9I kconfig entry   Maxime Ripard
• [U-Boot] [PATCH v3 09/11] sunxi: Add DRAM_SUN8I_A23 kconfig entry   Maxime Ripard
• [U-Boot] [PATCH v3 10/11] sunxi: Add DRAM_SUN8I_A33 kconfig entry   Maxime Ripard
• [U-Boot] [PATCH v3 11/11] sunxi: Add DRAM_SUN8I_A83T kconfig entry   Maxime Ripard
• [U-Boot] [PATCH] dm: MIGRATION: Add migration plan for DM_SPI & DM_SPI_FLASH   Jagan Teki
• [U-Boot] [PATCH v3 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [U-Boot, v2, 1/2] common/memsize.c: prepare get_ram_size update   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] common/memsize.c: restore content of the base address   Tom Rini
• [U-Boot] [U-Boot, 1/6] timer: stm32: Add timer support for STM32 SoCs family   Tom Rini
• [U-Boot] [U-Boot, 2/6] clk: clk_stm32f: Fix stm32_clk_get_rate() for timer   Tom Rini
• [U-Boot] [U-Boot, 3/6] clk: clk_stm32h7: Fix stm32_clk_get_rate() for timer   Tom Rini
• [U-Boot] [U-Boot, 4/6] clk: clk_stm32h7: Fix prescaler for Domain 3   Tom Rini
• [U-Boot] [U-Boot, 5/6] ARM: dts: stm32: Add timer support for STM32F7   Tom Rini
• [U-Boot] [U-Boot,6/6] board: stm32: switch to DM STM32 timer   Tom Rini
• [U-Boot] [U-Boot, 1/2] mmc: stm32: sdmmc2: add hardware flow control support   Tom Rini
• [U-Boot] [U-Boot, 2/2] mmc: stm32: sdmmc2: add support for st, pin-ckinsdmmc_ckin   Tom Rini
• [U-Boot] [U-Boot, 1/7] clk: clk_stm32f: Fix stm32_clk_get_rate()   Tom Rini
• [U-Boot] [U-Boot, 2/7] clk: clk_stm32f: Fix RCC_PLLSAICFGR mask defines   Tom Rini
• [U-Boot] [U-Boot, 3/7] clk: clk_stm32f: No more need of 48Mhz from PLL_SAI   Tom Rini
• [U-Boot] [U-Boot, 4/7] clk: clk_stm32f: Rework SDMMC stm32_clk_get_rate() part   Tom Rini
• [U-Boot] [U-Boot, 5/7] clk: clk_stm32f: Configure SAI PLL to generate LTDC pixel clock   Tom Rini
• [U-Boot] [U-Boot, 6/7] clk: clk_stm32f: Add set_rate for LTDC clock   Tom Rini
• [U-Boot] [U-Boot,7/7] clk: clk_stm32f: Add DSI clock support   Tom Rini
• [U-Boot] ARM: dts: stm32: limit sdio frequency to 14Mhz for stm32f429i-eval   Tom Rini
• [U-Boot] [U-Boot,v2,1/5] arch-stm32f4: Remove fmc.h file   Tom Rini
• [U-Boot] [U-Boot, v2, 2/5] arch-stm32: Move gpio.h for STM32 SoCs in include/asm/   Tom Rini
• [U-Boot] [U-Boot, v2, 3/5] arch-stm32: Factorize stm32.h for STM32F4 and F7   Tom Rini
• [U-Boot] [U-Boot,v2,4/5] arch-stm32: Remove stm32_periph.h   Tom Rini
• [U-Boot] [U-Boot, v2, 5/5] arch-stm32: Clean arch-stm32f7/syscfg.h   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] disk: part: scan the disk if the part_type is unknown   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] disk: part: use common api to lookup part driver   Tom Rini
• [U-Boot] ARM: dts: Add support for stm32f746-evaluation board support   Tom Rini
• [U-Boot] [U-Boot,1/2] test/py: add MMC/SD block read test   Tom Rini
• [U-Boot] [U-Boot, 2/2] test/py: highlight warnings in the log summary   Tom Rini
• [U-Boot] [U-Boot, 1/3] cmd: part: Allow passing partition name to start and size   Tom Rini
• [U-Boot] [U-Boot, 2/3] cmd: part: Extract common code to separate function   Tom Rini
• [U-Boot] [U-Boot,3/3] env: ti: boot: Get rid of magic numbers   Tom Rini
• [U-Boot] [U-Boot, v3, 1/3] ARM: omap3: beagle: Set 'mtdids' and 'mtdparts' in board file   Tom Rini
• [U-Boot] [U-Boot, v3, 2/3] ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout   Tom Rini
• [U-Boot] [U-Boot, v3, 3/3] ARM: omap3: evm: Sync with omap3_beagle configuration   Tom Rini
• [U-Boot] [U-Boot, v1, 1/4] ARM: dts: dra76x: create a common file with MMC/SD IOdelay data   Tom Rini
• [U-Boot] [U-Boot, v1, 2/4] ARM: dts: dra76-evm: shift to using common IOdelay data   Tom Rini
• [U-Boot] [U-Boot, v1, 3/4] configs: dra7xx_evm: Enable support for the HS200 mmc mode in the SPL   Tom Rini
• [U-Boot] [U-Boot, v1, 4/4] ARM: dts: dra7x: Make pinctrl and IOdelays for MMC2 available in SPL   Tom Rini
• [U-Boot] [U-Boot, 1/2] omap: Fix AM335x build with enabled fastboot flash   Tom Rini
• [U-Boot] [U-Boot, 2/2] configs: am335x_boneblack: Enable fastboot flash capability   Tom Rini
• [U-Boot] configs: stm32: Enable DOS_PARTITION for STM32F4/F7 boards   Tom Rini
• [U-Boot] mach-stm32: Use default memory map as background region   Tom Rini
• [U-Boot] [PATCH v3 7/7] test/py: add spi_flash tests   Michal Simek
• [U-Boot] efi_loader: Allow width smaller than buffer stride in efi_gop Blt()   Heinrich Schuchardt
• [U-Boot] [PATCH v3 7/7] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PATCH v3 7/7] test/py: add spi_flash tests   Stephen Warren
• [U-Boot] [PATCH v2 00/10] Add support for DM_USB for TI's DRA7 EVMs and AM57 EVMs platforms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 01/10] syscon: dm: Add a new method to get a regmap from DTS   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 02/10] usb: omap5: Add glue logic to support DM for USB host   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 03/10] phy: ti-pip3-phy: Add support for USB3 PHY   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 04/10] phy: Add a new driver for OMAP's USB2 PHYs   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 05/10] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 06/10] board; ti: am57xx: turn on USB clocks   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 07/10] dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 08/10] dts: dra7x: Disable USB1 on all evms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 09/10] configs: enable DM_USB for all the platforms of the DRA7 family   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 10/10] configs: am57xx_evm: Enable DM_USB and dependencies   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/6] Update ohci/ehci-generic drivers   patrice.chotard at st.com
• [U-Boot] [PATCH 1/6] usb: ehci-generic: handle phy power on/off   patrice.chotard at st.com
• [U-Boot] [PATCH 2/6] usb: ehci-generic: factorize PHY operation   patrice.chotard at st.com
• [U-Boot] [PATCH 3/6] usb: ehci-generic: replace pr_err() by dev_err()   patrice.chotard at st.com
• [U-Boot] [PATCH 4/6] usb: ohci-generic: handle phy power on/off   patrice.chotard at st.com
• [U-Boot] [PATCH 5/6] usb: ohci-generic: factorize PHY operation   patrice.chotard at st.com
• [U-Boot] [PATCH 6/6] usb: ohci-generic: replace pr_err() by dev_err()   patrice.chotard at st.com
• [U-Boot] [PATCH v2 04/10] phy: Add a new driver for OMAP's USB2 PHYs   Patrice CHOTARD
• [U-Boot] [RFC 0/7] Beginning of migration of MPC8xx to DM model   Christophe Leroy
• [U-Boot] [RFC 1/7] powercp: mpc8xx: move commproc.h   Christophe Leroy
• [U-Boot] [RFC 2/7] powerpc: mpc8xx: redistribute data in CPM dpram   Christophe Leroy
• [U-Boot] [RFC 3/7] board: MCR3000: properly setup initial RAM   Christophe Leroy
• [U-Boot] [RFC 4/7] board: MCR3000: Activate CONFIG_DM and CONFIG_OF_CONTROL   Christophe Leroy
• [U-Boot] [RFC 5/7] powerpc: mpc8xx: move watchdog into drivers/watchdog   Christophe Leroy
• [U-Boot] [RFC 6/7] drivers: watchdog: add a driver for the MPC8xx watchdog   Christophe Leroy
• [U-Boot] [RFC 7/7] board: MCR3000: use new DM watchdog   Christophe Leroy
• [U-Boot] efi_loader: Allow width smaller than buffer stride in efi_gop Blt()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/7] Provide SPL support for bootcount (in the case of using falcon boot mode)   Lukasz Majewski
• [U-Boot] [PATCH v2 1/7] bootcount: spl: Enable bootcount support in SPL   Lukasz Majewski
• [U-Boot] [PATCH v2 2/7] bootcount: Add include guards into bootcount.h file   Lukasz Majewski
• [U-Boot] [PATCH v2 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH v2 4/7] bootcount: u-boot: Do not increment bootcount if already done in SPL   Lukasz Majewski
• [U-Boot] [PATCH v2 5/7] bootcount: spl: Extend SPL to support bootcount incrementation   Lukasz Majewski
• [U-Boot] [PATCH v2 6/7] bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking   Lukasz Majewski
• [U-Boot] [PATCH v2 7/7] bootcount: display5: config: Enable boot count feature in the display5 board   Lukasz Majewski
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH v2 04/10] phy: Add a new driver for OMAP's USB2 PHYs   Jean-Jacques Hiblot
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH] spi: omap3: Fix redeclared error   Jagan Teki
• [U-Boot] [PATCH] .travis.yml: Add lzop   Tom Rini
• [U-Boot] [v2] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH] spi: omap3: Fix redeclared error   Jagan Teki
• [U-Boot] efi_loader: Allow width smaller than buffer stride in efi_gop Blt()   Ivan Gorinov
• [U-Boot] Pull request: u-boot-spi/master   Adam Ford
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH 1/1] efi_loader: correctly support parameter delta in Blt   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] board: am335x: Set serial# variable   Sam Protsenko
• [U-Boot] [PATCH 1/2] ARM: dts: zynq: Update dts for Z-turn board   Anton Gerasimov
• [U-Boot] [PATCH v4 0/7] add inital SF tests   Liam Beguin
• [U-Boot] [PATCH v4 1/7] spi: spi_flash: do not fail silently on bad user input   Liam Beguin
• [U-Boot] [PATCH v4 2/7] cmd: sf: fix map_physmem check   Liam Beguin
• [U-Boot] [PATCH v4 3/7] test/py: README: fix typo   Liam Beguin
• [U-Boot] [PATCH v4 4/7] test/py: README: add HOSTNAME to PYTHONPATH   Liam Beguin
• [U-Boot] [PATCH v4 5/7] test/py: do not import pytest multiple times   Liam Beguin
• [U-Boot] [PATCH v4 6/7] test/py: add generic CRC32 function   Liam Beguin
• [U-Boot] [PATCH v4 7/7] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] [PATCH v4 7/7] test/py: add spi_flash tests   Stephen Warren
• [U-Boot] [PATCH v4 7/7] test/py: add spi_flash tests   Liam Beguin
• [U-Boot] U-boot Hush Environment   Duncan Hare
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   David Lechner
• [U-Boot] uboot for ARRIA10 SoC   Spinelli, Claudio (Nokia - US/Murray Hill)
• [U-Boot] [PATCH] ARM: uniphier: dts: sync with Linux 4.16-rc5   Masahiro Yamada
• [U-Boot] [PATCH 1/3] mmc: ftsdc010: Support High-Speed mode   Andes
• [U-Boot] [PATCH 2/3] riscv: dts: AE250 support sd High-Speed mode   Andes
• [U-Boot] [PATCH 3/3] nds32: dts: AG101P support sd High-Speed mode   Andes
• [U-Boot] [PATCH v2 0/3] spi: ompa3/davinci/ti_qspi: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v2 1/3] spi: omap3_spi: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v2 2/3] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v2 3/3] spi: ti_qspi: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v3 7/7] test/py: add spi_flash tests   Michal Simek
• [U-Boot] [PATCH 1/2] ARM: dts: zynq: Update dts for Z-turn board   Michal Simek
• [U-Boot] [PATCH] driver: net: fsl-mc: updated copyright info   Yogesh Gaur
• [U-Boot] [PATCH v10 4/4] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH] powerpc: configs: Set initrd_high environment varible   Prabhakar Kushwaha
• [U-Boot] [PATCH] usb: gadget: composite: fix NULL pointer when a non standard request is received   patrice.chotard at st.com
• [U-Boot] [PATCH 00/14] at91: Add boards with OF_CONTROL/DM/DM_SPI   Jagan Teki
• [U-Boot] [PATCH] scripts/check-config.sh: fix "command not found" error handling   Luca Ceresoli
• [U-Boot] [PATCH] kwbimage: Fix out of bounds access   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: correctly support parameter delta in Blt   Alexander Graf
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Peter Howard
• [U-Boot] [PATCH 0/2] ARM: AM43xx: Add support for RTC only mode   Keerthy
• [U-Boot] [PATCH 1/2] ARM: AM43xx: Add support for RTC only mode   Keerthy
• [U-Boot] [PATCH 2/2] am43xx: Do not allow EMIF to control DDR_RESET in rtconly config   Keerthy
• [U-Boot] [PATCH] kwbimage: Fix out of bounds access   Michal Simek
• [U-Boot] [PATCH 1/2] spi: kirkwood: Get drvdata in .ofdata_to_platdata   Jagan Teki
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v10 4/4] common: Generic firmware loader for file system   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: AM43xx: Add support for RTC only mode   Tom Rini
• [U-Boot] [PATCH 2/2] am43xx: Do not allow EMIF to control DDR_RESET in rtconly config   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH] .travis.yml: Add lzop   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: AM43xx: Add support for RTC only mode   Keerthy
• [U-Boot] [PATCH] powerpc: configs: Set initrd_high environment varible   Tom Rini
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Sekhar Nori
• [U-Boot] [PATCH 1/2] ARM: AM43xx: Add support for RTC only mode   Tom Rini
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Sekhar Nori
• [U-Boot] [PATCH] ARM: uniphier: change load addresses for bigger kernel image   Masahiro Yamada
• [U-Boot] [PATCH] uniphier: increase the firmware size in update command environment   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: dts: sync with Linux 4.16-rc5   Masahiro Yamada
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH 1/2] efi_loader: Optimize GOP switch   Alexander Graf
• [U-Boot] [PATCH 2/2] efi_loader: Optimize GOP more   Alexander Graf
• [U-Boot] [PATCH 1/2] rpi3: Enable lan78xx driver   Alexander Graf
• [U-Boot] [PATCH 2/2] rpi: Add identifier for the new RPi3 B+   Alexander Graf
• [U-Boot] [PATCH] net: Only access network devices after init   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Fix return value for efi_add_runtime_mmio   Alexander Graf
• [U-Boot] [PATCH] lan7xxx: Require phylib   Alexander Graf
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Sekhar Nori
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   David Lechner
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Tom Rini
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Lokesh Vutla
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   David Lechner
• [U-Boot] Bootcmd, Autorun and Hush Shell   Duncan Hare
• [U-Boot] [PATCH 0/2] Fix boot in some am335x sk boards   Faiz Abbas
• [U-Boot] [PATCH 1/2] gpio: omap_gpio: Add DM_FLAG_PRE_RELOC flag   Faiz Abbas
• [U-Boot] [PATCH 2/2] configs: am335x_evm: Increase SPL_SYS_MALLOC_F_LEN to accomodate gpio_devices   Faiz Abbas
• [U-Boot] [PATCH] efi_loader: Fix network DP with DM_ETH   Alexander Graf
• [U-Boot] [PATCH 1/4] imx: hab: Add routine to set HAB IVT address   Breno Matheus Lima
• [U-Boot] [PATCH 2/4] imx: hab: Encase majority of header in __ASSEMBLY__ declaration   Breno Matheus Lima
• [U-Boot] [PATCH 3/4] imx: hab: Specify IVT padding size   Breno Matheus Lima
• [U-Boot] [PATCH 0/3] Update DWC2 driver   patrice.chotard at st.com
• [U-Boot] [PATCH 1/3] usb: dwc2: disable external vbus supply when the device is removed   patrice.chotard at st.com
• [U-Boot] [PATCH 2/3] usb: dwc2: increase timeout in wait_for_chhltd   patrice.chotard at st.com
• [U-Boot] [PATCH 3/3] usb: dwc2: Replace printf, pr_err by dev_info, dev_err   patrice.chotard at st.com
• [U-Boot] [PATCH 1/1] efi_loader: correctly support parameter delta in Blt   Ivan Gorinov
• [U-Boot] [PATCH 4/4] imx: hab: Provide hab_auth_img_or_fail command   Breno Matheus Lima
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH 1/2] gpio: omap_gpio: Add DM_FLAG_PRE_RELOC flag   Tom Rini
• [U-Boot] [PATCH 2/2] configs: am335x_evm: Increase SPL_SYS_MALLOC_F_LEN to accomodate gpio_devices   Tom Rini
• [U-Boot] [v2] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH] net: Only access network devices after init   Joe Hershberger
• [U-Boot] [PATCH] lan7xxx: Require phylib   Joe Hershberger
• [U-Boot] net: fec_mxc: multiple calls to fec_mii_setspeed()   Joe Hershberger
• [U-Boot] dhcp command not populating dnsip environment variable   Duncan Hare
• [U-Boot] dhcp command not populating dnsip environment variable   Joe Hershberger
• [U-Boot] [PATCH] tools: zynqimage: Add partition read support   Alexander Graf
• [U-Boot] [PATCH] tools: xilinx: Fix zynq/zynqmp image recognition   Alexander Graf
• [U-Boot] [PATCH] Migrate CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC   Alex Kiernan
• [U-Boot] [PATCH] x86: zImage: pass device tree setup data to the kernel   Ivan Gorinov
• [U-Boot] [PATCHv2 0/2] Changes to Z-turn dts   Anton Gerasimov
• [U-Boot] [PATCHv2 1/2] ARM: dts: zynq: Update dts for Z-turn board   Anton Gerasimov
• [U-Boot] [PATCHv2 2/2] ARM: dts: zynq: Rename dts for Z-turn board   Anton Gerasimov
• [U-Boot] [PATCHv2 1/2] ARM: dts: zynq: Update dts for Z-turn board   Alexander Graf
• [U-Boot] net: fec_mxc: multiple calls to fec_mii_setspeed()   Troy Kisky
• [U-Boot] [PATCHv2 2/2] ARM: dts: zynq: Rename dts for Z-turn board   Alexander Graf
• [U-Boot] dhcp command not populating dnsip environment variable   Duncan Hare
• [U-Boot] [PATCH] lan7xxx: Require phylib   Tuomas Tynkkynen
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Mike Looijmans
• [U-Boot] [PATCH] rpi3_32b: Enable lan78xx driver   Peter Robinson
• [U-Boot] [PATCH] tools: zynqimage: Add partition read support   Nathan Rossi
• [U-Boot] [PATCH v3 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry   Maxime Ripard
• [U-Boot] [PATCH] watchdog: omap_wdt: improve watchdog reset path   Alex Kiernan
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Sekhar Nori
• [U-Boot] [PATCH v3 00/15] Powerpc: mpc8xx: cleanup before migration to DM model   Christophe LEROY
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Sekhar Nori
• [U-Boot] [PATCH 1/4] imx: hab: Add routine to set HAB IVT address   Lothar Waßmann
• [U-Boot] [PATCH] davinci: Enable DDR_INIT for DRA8XX   Lokesh Vutla
• [U-Boot] [PATCH] davinci: Enable DDR_INIT for DRA8XX   Tero Kristo
• [U-Boot] [PATCH] davinci: Enable DDR_INIT for DRA8XX   Lokesh Vutla
• [U-Boot] [PATCH v2] davinci: Enable DDR_INIT for DA8XX   Lokesh Vutla
• [U-Boot] [PATCH v4 00/11] arm: sunxi: Use proper and meaningful Kconfig entries   Jagan Teki
• [U-Boot] [PATCH v4 01/11] sunxi: Add SUN6I_PRCM kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 03/11] sunxi: Use SUN6I_PRCM if used   Jagan Teki
• [U-Boot] [PATCH v4 04/11] sunxi: Add SUN8I_RSB kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 05/11] sunxi: Add AXP_PMIC_BUS kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 06/11] sunxi: add DRAM_SUN6I kconfig   Jagan Teki
• [U-Boot] [PATCH v4 07/11] sunxi: Add DRAM_SUN4I kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 08/11] sunxi: Add DRAM_SUN9I kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 09/11] sunxi: Add DRAM_SUN8I_A23 kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 10/11] sunxi: Add DRAM_SUN8I_A33 kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 11/11] sunxi: Add DRAM_SUN8I_A83T kconfig entry   Jagan Teki
• [U-Boot] SPL dcache   Alex Kiernan
• [U-Boot] SPL dcache   Lokesh Vutla
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Sekhar Nori
• [U-Boot] [PATCH v2 0/2] ARM: AM43xx: Add support for RTC only mode   Keerthy
• [U-Boot] [PATCH v2 1/2] ARM: AM43xx: Add support for RTC only mode   Keerthy
• [U-Boot] [PATCH v2 2/2] am43xx: Do not allow EMIF to control DDR_RESET in rtconly config   Keerthy
• [U-Boot] SPL dcache   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] ARM: AM43xx: Add support for RTC only mode   Tero Kristo
• [U-Boot] [PATCH] tools: xilinx: Fix zynq/zynqmp image recognition   Michal Simek
• [U-Boot] [PATCH] x86: zImage: pass device tree setup data to the kernel   Andy Shevchenko
• [U-Boot] [PATCHv2 1/2] ARM: dts: zynq: Update dts for Z-turn board   Michal Simek
• [U-Boot] [PATCH] tools: xilinx: Fix zynq/zynqmp image recognition   Alexander Graf
• [U-Boot] [PATCH v2] tools: xilinx: Fix zynq/zynqmp image recognition   Michal Simek
• [U-Boot] [PATCH] tools: xilinx: Fix zynq/zynqmp image recognition   Michal Simek
• [U-Boot] [PATCH 2/2] efi_loader: Optimize GOP more   Heinrich Schuchardt
• [U-Boot] [PATCHv2 1/2] ARM: dts: zynq: Update dts for Z-turn board   Tom Rini
• [U-Boot] [PATCH] tools: zynqimage: Add partition read support   Michal Simek
• [U-Boot] [PATCH] usb: dwc2_udc_otg: Add gotgctl customization   Patrice Chotard
• [U-Boot] [PATCH 0/2] ARM: omapl138: Enable DM and DT support   Lokesh Vutla
• [U-Boot] [PATCH 1/2] ARM: dts: da850-lcdk: Sync from Linux 4.16   Lokesh Vutla
• [U-Boot] [PATCH 2/2] configs: omapl138: Enable DM and DT   Lokesh Vutla
• [U-Boot] [U-Boot,1/3] clk: at91: add USB Host clock driver   Tom Rini
• [U-Boot] [U-Boot,2/3] clk: at91: add PLLADIV driver   Tom Rini
• [U-Boot] [U-Boot, 3/3] clk: at91: clk-system: add set/get_rate operations   Tom Rini
• [U-Boot] [U-Boot,v2,1/1] board: am335x: Set serial# variable   Tom Rini
• [U-Boot] watchdog: omap_wdt: improve watchdog reset path   Tom Rini
• [U-Boot] [U-Boot, U-Boot, v2, 1/2] configs: k2l: Updates u-boot env to install secure boot monitor   Tom Rini
• [U-Boot] [U-Boot, U-Boot, v2, 2/2] defconfig: k2l_hs_evm: Add k2l_hs_evm_defconfig   Tom Rini
• [U-Boot] [PATCH 2/2] efi_loader: Optimize GOP more   Heinrich Schuchardt
• [U-Boot] [PATCH v2] davinci: Enable DDR_INIT for DA8XX   David Lechner
• [U-Boot] [PATCH v2] davinci: Enable DDR_INIT for DA8XX   Lokesh Vutla
• [U-Boot] [PATCH v2] davinci: Enable DDR_INIT for DA8XX   David Lechner
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   David Lechner
• [U-Boot] [PATCH] drivers: serial: remove nonexisting initialisation functions   Christophe Leroy
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   David Lechner
• [U-Boot] [PATCH v4 00/16] Powerpc: mpc8xx: cleanup before migration to DM model   Christophe Leroy
• [U-Boot] [PATCH v4 01/16] soft_i2c: cleanup - no mpc8xx support   Christophe Leroy
• [U-Boot] [PATCH v4 02/16] powerpc: mpc8xx: harmonise initialisation of the immap local pointer   Christophe Leroy
• [U-Boot] [PATCH v4 03/16] powerpc: mpc8xx: get rid of the multiple PVR_ values   Christophe Leroy
• [U-Boot] [PATCH v4 04/16] powerpc: mpc8xx: make get_immr() independent of CONFIG_8xx   Christophe Leroy
• [U-Boot] [PATCH v4 05/16] powerpc: mpc8xx: remove get_immr() argument   Christophe Leroy
• [U-Boot] [PATCH v4 06/16] powerpc: mpc8xx: Change CONFIG_8xx to CONFIG_MPC8xx   Christophe Leroy
• [U-Boot] [PATCH v4 07/16] powercp: mpc8xx: move commproc.h   Christophe Leroy
• [U-Boot] [PATCH v4 08/16] powerpc: mpc8xx: redistribute data in CPM dpram   Christophe Leroy
• [U-Boot] [PATCH v4 09/16] powerpc: mpc8xx: initialisation of initial RAM   Christophe Leroy
• [U-Boot] [PATCH v4 10/16] board: MCR3000: replace mtd->priv by mtd_to_nand()   Christophe Leroy
• [U-Boot] [PATCH v4 11/16] board: MCR3000: cleanup config   Christophe Leroy
• [U-Boot] [PATCH v4 12/16] common: env_embedded: allow fine placement of environment object   Christophe Leroy
• [U-Boot] [PATCH v4 13/16] board: MCR3000: Use smaller flash sector for environment   Christophe Leroy
• [U-Boot] [PATCH v4 14/16] powerpc: mpc8xx: refactorise reginfo   Christophe Leroy
• [U-Boot] [PATCH v4 15/16] powerpc: mpc8xx: cleaning up watchdog   Christophe Leroy
• [U-Boot] [PATCH v4 16/16] powerpc: mpc8xx: move watchdog into drivers/watchdog   Christophe Leroy
• [U-Boot] [PATCH] usb: dwc2_udc_otg: Add gotgctl customization   Marek Vasut
• [U-Boot] [PATCH RFCv2 0/6] Beginning of migration of MPC8xx to DM model   Christophe Leroy
• [U-Boot] [PATCH RFCv2 1/6] board: MCR3000: Activate CONFIG_DM and CONFIG_OF_CONTROL   Christophe Leroy
• [U-Boot] [PATCH RFCv2 2/6] drivers: watchdog: add a DM driver for the MPC8xx watchdog   Christophe Leroy
• [U-Boot] [PATCH RFCv2 3/6] board: MCR3000: use new DM watchdog   Christophe Leroy
• [U-Boot] [PATCH RFCv2 4/6] drivers: serial: migrate mpc8xx to DM   Christophe Leroy
• [U-Boot] [PATCH RFCv2 5/6] board: MCR3000: migrate to DM_SERIAL   Christophe Leroy
• [U-Boot] [PATCH RFCv2 6/6] drivers: serial: get rid of non DM mpc8xx driver   Christophe Leroy
• [U-Boot] [PATCH 1/2] ARM: dts: da850-lcdk: Sync from Linux 4.16   Tom Rini
• [U-Boot] [PATCH 2/2] configs: omapl138: Enable DM and DT   Tom Rini
• [U-Boot] [PATCH v2] davinci: Enable DDR_INIT for DA8XX   Tom Rini
• [U-Boot] [U-Boot, PATCHv2, 1/2] dra7xx: Always enable UART1 and UART3 in early_padconf   Tom Rini
• [U-Boot] [U-Boot, PATCHv2, 2/2] Convert all of CONFIG_CONS_INDEX to Kconfig   Tom Rini
• [U-Boot] dm: MIGRATION: Add migration plan for DM_SPI & DM_SPI_FLASH   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: use __always_inline for pixel conversion   Heinrich Schuchardt
• [U-Boot] dhcp command not populating dnsip environment variable   Duncan Hare
• [U-Boot] [PATCH] lan7xxx: Require phylib   Joe Hershberger
• [U-Boot] [PATCH v2] x86: zImage: pass device tree setup data to the kernel   Ivan Gorinov
• [U-Boot] [PATCH v3 1/2] i.MX6: nand: add nandbcb update command   Fabio Estevam
• [U-Boot] dhcp command not populating dnsip environment variable   Joe Hershberger
• [U-Boot] [PATCH v2] x86: zImage: pass device tree setup data to the kernel   Andy Shevchenko
• [U-Boot] [PATCH v2] x86: zImage: pass device tree setup data to the kernel   Andy Shevchenko
• [U-Boot] [PATCH v2 1/1] efi_loader: use __always_inline for pixel conversion   Heinrich Schuchardt
• [U-Boot] [PATCH] scripts/check-config.sh: fix "command not found" error handling   Simon Glass
• [U-Boot] [PATCH v2] x86: zImage: pass device tree setup data to the kernel   Simon Glass
• [U-Boot] [PATCH v2 1/3] spi: omap3_spi: Full dm conversion   Adam Ford
• [U-Boot] [PATCHv2 1/2] ARM: dts: zynq: Update dts for Z-turn board   Anton Gerasimov
• [U-Boot] [PATCH v2] x86: zImage: pass device tree setup data to the kernel   Ivan Gorinov
• [U-Boot] [PATCH v3] x86: zImage: pass device tree setup data to the kernel   Ivan Gorinov
• [U-Boot] [PATCH v2 1/3] usb: xhci-dwc3: Power on USB PHY before using   Marek Vasut
• [U-Boot] [PATCH 1/4] usb: Remove unused ppc4xx EHCI host driver   Marek Vasut
• [U-Boot] [PATCH 5/6] usb: ohci-generic: factorize PHY operation   Marek Vasut
• [U-Boot] [PATCH 0/6] Update ohci/ehci-generic drivers   Marek Vasut
• [U-Boot] [PATCH 0/3] Update DWC2 driver   Marek Vasut
• [U-Boot] [PATCH 1/3] arm: socfpga: stratix10: Add base address map for Statix10 SoC   Marek Vasut
• [U-Boot] [PATCH 0/3] ARM: stratix10: initial small patchset   Marek Vasut
• [U-Boot] [PATCH] mmc: use core clock frequency in bcm2835 sdhost   Jonathan Gray
• [U-Boot] [PATCH v3 0/2] Add support for RTC only + DDR in self-refresh mode   Keerthy
• [U-Boot] [PATCH v3 1/2] ARM: AM43xx: Add support for RTC only + DDR in self-refresh mode   Keerthy
• [U-Boot] [PATCH v3 2/2] am43xx: Do not allow EMIF to control DDR_RESET in rtconly config   Keerthy
• [U-Boot] [PATCH v3 1/2] ARM: AM43xx: Add support for RTC only + DDR in self-refresh mode   Keerthy
• [U-Boot] [PATCH v4 1/2] ARM: AM43xx: Add support for RTC only + DDR in self-refresh mode   Keerthy
• [U-Boot] [PATCH] arm64: mvebu: a8k: Add distro boot support   Mark Kettenis
• [U-Boot] [PATCH] rockchip: rk3399: set fdtfile   Mark Kettenis
• [U-Boot] [PATCH 1/4] imx: hab: Add routine to set HAB IVT address   Bryan O'Donoghue
• [U-Boot] [PATCH 3/4] imx: hab: Specify IVT padding size   Bryan O'Donoghue
• [U-Boot] [PATCH 4/4] imx: hab: Provide hab_auth_img_or_fail command   Bryan O'Donoghue
• [U-Boot] [PATCH] sysreset: syscon: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH] watchdog: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH] serial: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH] clk: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH] drivers: reset: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH] gpio: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH 1/2] led: bcm6358: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH 2/2] led: bcm6328: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH] power: domain: bcm6328: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH 1/2] spi: bcm63xx_spi: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH 2/2] spi: bcm63xx_hsspi: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH] ram: bmips: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] tools/mxsimage: Support building with LibreSSL   Hauke Mehrtens
• [U-Boot] [PATCH v8 1/3] Adding TCP and wget into u-boot   Calvin Johnson
• [U-Boot] tools/mxsimage: Support building with LibreSSL   Marek Vasut
• [U-Boot] tools/mxsimage: Support building with LibreSSL   Hauke Mehrtens
• [U-Boot] tools/mxsimage: Support building with LibreSSL   Marek Vasut
• [U-Boot] [PATCH v8 1/3] Adding TCP and wget into u-boot   Calvin Johnson
• [U-Boot] [PATCH] watchdog: bcm6345: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH] sysreset: syscon: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH 0/3] mips: bmips: add BCM6362 SoC support   Daniel Schwierzeck
• [U-Boot] [PATCH v2] mips: bmips: select OF_EMBED for all boards   Daniel Schwierzeck
• [U-Boot] [PATCH 1/3] phy: add support for bcm6348 usbh phy   Daniel Schwierzeck
• [U-Boot] [PATCH v2] tools/mxsimage: Support building with LibreSSL   Hauke Mehrtens
• [U-Boot] [PATCH 1/1] mmc: avoid division by zero in meson_mmc_config_clock   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] env: typo in description of ENV_IS_IN_REMOTE   Heinrich Schuchardt
• [U-Boot] [PATCH v2] tools/mxsimage: Support building with LibreSSL   Marek Vasut
• [U-Boot] [PATCH 1/1] mmc: avoid division by zero in meson_mmc_config_clock   Vagrant Cascadian
• [U-Boot] tools/mxsimage: Support building with LibreSSL   Jonathan Gray
• [U-Boot] tools/mxsimage: Support building with LibreSSL   Hauke Mehrtens
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Peter Howard
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Peter Howard
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Peter Howard
• [U-Boot] tools/mxsimage: Support building with LibreSSL   Jonathan Gray
• [U-Boot] pci modify [.l .w .b]   Steven Seeger
• [U-Boot] [PATCH 1/3] phy: add support for bcm6348 usbh phy   Álvaro Fernández Rojas
• [U-Boot] [PATCH 1/1] bios_emulator: remove assignment without effect   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] i2c: lpi2c: remove superfluous assignments   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] drivers: net: cpsw: remove superfluous assignment.   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] net: macb: remove superfluous logical constraint   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] drivers:power:max77693: remove redundant logical constraint   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] regulator: pbias: don't evaluate variable before assignment   Heinrich Schuchardt
• [U-Boot] [RFC 1/1] driver: ram: rockchip: rk3399: missing counter increment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] spi: atcspi200: avoid NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] spi: fsl_qspi: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] spi: lpc32xx: simplify logical expression   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: dwc3: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: gadget: remove duplicate assignment.   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: dwc3: remove superfluous assignment   Marek Vasut
• [U-Boot] [PATCH 1/1] usb: f_mass_storage: simplify logical expression   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: rockchip: remove duplicate assignement.   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: ehci-farady: remove redundant assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: ehci-farady: remove redundant assignment   Marek Vasut
• [U-Boot] [PATCH 1/1] usb: sl811-hcd: remove duplicat assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: xhci-exynos5: correct error checking   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: xhci-keystone: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: xhci-ring: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: xhci: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: musb: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: musb-new: misplaced out of bounds check   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] video: cfb_console: simplify logical constraint   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] video: stb_truetype: simplify expression   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] video, da8xx-fb: fix time out in wait_for_event()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] video: exynos: remove redundant assignments   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] video: rk3399_mipi: correct error checking   Heinrich Schuchardt
• [U-Boot] [RFC 1/1] video: rk3288_mipi: check in rk_mipi_ofdata_to_platdata   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: ehci-farady: remove redundant assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: dwc3: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/2] ARM: AM43xx: Add support for RTC only + DDR in self-refresh mode   Tom Rini
• [U-Boot] [U-Boot, v3] common: add a prototype for mach_cpu_init()   Tom Rini
• [U-Boot] common: remove unused prototypes   Tom Rini
• [U-Boot] post: remove reference to power functions   Tom Rini
• [U-Boot] [U-Boot, 1/1] MAINTAINERS: ARM FREESCALE IMX: remove invalid path   Tom Rini
• [U-Boot] [U-Boot, 1/1] MAINTAINERS: ARM HISILICON: correct maintained path   Tom Rini
• [U-Boot] [U-Boot, 1/1] MAINTAINERS: FLATTENED DEVICE TREE: correct maintained path   Tom Rini
• [U-Boot] [U-Boot, 1/1] MAINTAINERS: ARM SAMSUNG: remove invalid paths   Tom Rini
• [U-Boot] [U-Boot, 1/1] MAINTAINERS: ARM TI: remove invalid paths   Tom Rini
• [U-Boot] [U-Boot, 1/1] MAINTAINERS: TI SYSTEM SECURITY: remove invalid file   Tom Rini
• [U-Boot] ppc: Remove orphan xilinx_irq.h file   Tom Rini
• [U-Boot] [U-Boot, v2, 1/5] common: move board_f.c prototypes in init.h   Tom Rini
• [U-Boot] [U-Boot, v2, 2/5] common: move board_init.c prototypes in init.h   Tom Rini
• [U-Boot] [U-Boot, v2, 3/5] common: move board_r.c prototypes in init.h   Tom Rini
• [U-Boot] [U-Boot, v2, 4/5] common: move board_info.c prototypes in init.h   Tom Rini
• [U-Boot] [U-Boot, v2, 5/5] common: move init_helpers.h prototypes in init.h   Tom Rini
• [U-Boot] [PATCH v3] tools/mxsimage: Support building with LibreSSL   Hauke Mehrtens
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC, DM_SCSI   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] usb: ehci-farady: remove redundant assignment   Marek Vasut
• [U-Boot] [PATCH 1/1] usb: ehci-farady: remove redundant assignment   Heinrich Schuchardt
• [U-Boot] [U-Boot, v1, 1/2] rockchip: pinctrl: rk3399: fix GPIO2B1 and GPIO2B2 shift value   Philipp Tomsich
• [U-Boot] [U-Boot, v1, 2/2] rockchip: pinctrl: rk3399: add support for I2C[123467]   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] usb: rockchip: remove duplicate assignement.   Philipp Tomsich
• [U-Boot] [U-Boot, RFC, 1/1] driver: ram: rockchip: rk3399: missing counter increment   Philipp Tomsich
• [U-Boot] rockchip: rk3399: set fdtfile   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] video: rk3399_mipi: correct error checking   Philipp Tomsich
• [U-Boot] [U-Boot, RFC, 1/1] video: rk3288_mipi: check in rk_mipi_ofdata_to_platdata   Philipp Tomsich
• [U-Boot] [U-Boot, v2] rockchip: i2c: enable new I2C controller for rk3066 and rk3188   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] usb: rockchip: remove duplicate assignement.   Philipp Tomsich
• [U-Boot] [U-Boot, RFC, 1/1] driver: ram: rockchip: rk3399: missing counter increment   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] video: rk3399_mipi: correct error checking   Philipp Tomsich
• [U-Boot] [U-Boot, RFC, 1/1] video: rk3288_mipi: check in rk_mipi_ofdata_to_platdata   Philipp Tomsich
• [U-Boot] [PATCH v1] rtc: rewrite isl1208 to support DM   Klaus Goger
• [U-Boot] [PATCH] davinci: omapl138_lcdk: fix PLL0 frequency   Mike Looijmans
• [U-Boot] [PATCH v1] rtc: rewrite isl1208 to support DM   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG   Petr Vorel
• [U-Boot] iminfo and zImages   Wolfgang Denk
• [U-Boot] dhcp command not populating dnsip environment variable   Duncan Hare
• [U-Boot] [ANN] U-Boot v2018.03 released   Wolfgang Denk
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC, DM_SCSI   Maxime Ripard
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC, DM_SCSI   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] lib/slre: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] lib/slre: remove superfluous assignment   Tom Rini
• [U-Boot] [PATCH v2 1/1] lib/slre: remove superfluous assignment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] mips: micronas/vct: check array bounds before access   Heinrich Schuchardt
• [U-Boot] [PATCH v8 1/3] Adding TCP and wget into u-boot   Duncan Hare
• [U-Boot] [U-Boot, 1/2] rockchip: pinctrl: rk3036: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: pinctrl: rk3188: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, RFC, 1/1] driver: ram: rockchip: rk3399: missing counter increment   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] usb: rockchip: remove duplicate assignement.   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] video: rk3399_mipi: correct error checking   Philipp Tomsich
• [U-Boot] [U-Boot, RFC, 1/1] video: rk3288_mipi: check in rk_mipi_ofdata_to_platdata   Philipp Tomsich
• [U-Boot] rockchip: clk: rk3188: update dpll settings to make EMAC work   Philipp Tomsich
• [U-Boot] [U-Boot, 1/1] usb: rockchip: remove duplicate assignement.   Marek Vasut
• [U-Boot] [PATCH 1/1] mips: micronas/vct: check array bounds before access   Daniel Schwierzeck
• [U-Boot] [PATCH 0/3] bmips: add support for bcm6348 usbh phy   Daniel Schwierzeck
• [U-Boot] [PATCH 0/4] bmips: add support for bcm6358 usbh phy   Daniel Schwierzeck
• [U-Boot] [PATCH v2 1/1] lib/slre: remove superfluous assignment   Tom Rini
• [U-Boot] [PATCH v2 0/9] bmips: add support for bcm6368 usbh phy   Daniel Schwierzeck
• [U-Boot] [PATCH v2 0/3] bmips: add support for bcm6318 usbh phy   Daniel Schwierzeck
• [U-Boot] [PATCH 1/1] usb: xhci: remove superfluous assignment   Bin Meng
• [U-Boot] [PATCH 1/1] usb: xhci-ring: remove superfluous assignment   Bin Meng
• [U-Boot] [PATCH 1/1] usb: xhci-keystone: remove superfluous assignment   Bin Meng
• [U-Boot] [PATCH 1/1] usb: xhci-exynos5: correct error checking   Bin Meng
• [U-Boot] [PATCH 1/1] usb: xhci: remove superfluous assignment   Bin Meng
• [U-Boot] [PATCH 1/1] usb: xhci-ring: remove superfluous assignment   Bin Meng
• [U-Boot] [PATCH 1/1] usb: xhci-keystone: remove superfluous assignment   Bin Meng
• [U-Boot] [PATCH 1/1] usb: xhci-exynos5: correct error checking   Bin Meng
• [U-Boot] Please pull u-boot-usb/topic-xhci   Bin Meng
• [U-Boot] [PATCH v3] x86: zImage: pass device tree setup data to the kernel   Bin Meng
• [U-Boot] [PATCH] x86: mmc: Fix mapping of BAR memory   Bin Meng
• [U-Boot] [PATCH 1/1] video: exynos: remove redundant assignments   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] usb: musb-new: misplaced out of bounds check   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] usb: musb-new: misplaced out of bounds check   Heinrich Schuchardt
• [U-Boot] [RFC PATCH] Allow providing default environment from file   Sean Nyekjær
• [U-Boot] rockchip: rk3399: set fdtfile   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH] usb: dwc2_udc_otg: Add gotgctl customization   Patrice CHOTARD
• [U-Boot] uboot for ARRIA10 SoC   Friedrich Daniel
• [U-Boot] rockchip: rk3399: set fdtfile   Jonathan Gray
• [U-Boot] rockchip: rk3399: set fdtfile   Philipp Tomsich
• [U-Boot] [PATCH 0/5] ARM: i.MX6: Add proper CONFIG names   Jagan Teki
• [U-Boot] [PATCH 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures   Jagan Teki
• [U-Boot] [PATCH 2/5] i.MX6: Change SYS_SOC from mx6 to imx6   Jagan Teki
• [U-Boot] [PATCH 3/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl   Jagan Teki
• [U-Boot] [PATCH 4/5] ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl   Jagan Teki
• [U-Boot] [PATCH 5/5] ARM: i.MX6: dts: Build dtb based on SOC type   Jagan Teki
• [U-Boot] [PATCH v5 02/11] sunxi: Add SUN6I_P2WI kconfig entry   Jagan Teki
• [U-Boot] [PATCH 1/1] video: cfb_console: simplify logical constraint   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] video: stb_truetype: simplify expression   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] video, da8xx-fb: fix time out in wait_for_event()   Anatolij Gustschin
• [U-Boot] [PATCH 1/1] video: exynos: remove redundant assignments   Anatolij Gustschin
• [U-Boot] [PATCH v2] x86: zImage: pass device tree setup data to the kernel   Andy Shevchenko
• [U-Boot] Please pull u-boot-usb/topic-xhci   Marek Vasut
• [U-Boot] [PATCH] usb: dwc2_udc_otg: Add gotgctl customization   Marek Vasut
• [U-Boot] [PATCH v8 1/3] Adding TCP and wget into u-boot   Calvin Johnson
• [U-Boot] [PATCH v3] tools/mxsimage: Support building with LibreSSL   Jonathan Gray
• [U-Boot] [PATCH v2 1/3] ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG   Petr Vorel
• [U-Boot] [PATCH v2 2/3] Convert CONFIG_UBIFS_SILENCE_MSG to Kconfig   Petr Vorel
• [U-Boot] [PATCH v2 3/3] Convert CONFIG_UBI_SILENCE_MSG to Kconfig   Petr Vorel
• [U-Boot] [U-Boot, 1/3] ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG   Petr Vorel
• [U-Boot] [PATCH] fs: btrfs: Remove unused debug code left from development   Marek Behún
• [U-Boot] rockchip: rk3399: set fdtfile   Mark Kettenis
• [U-Boot] [RFC PATCH] Allow providing default environment from file   Tom Rini
• [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC   Wadim Egorov
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH 1/1] video: rk3399_mipi: correct error checking   Punit Agrawal
• [U-Boot] [PATCH 1/1] video: rk3399_mipi: correct error checking   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] video: rk3288_mipi: Combine NULL check into IS_ERR_OR_NULL()   Punit Agrawal
• [U-Boot] [PATCH 2/2] video: rk3399_mipi: Combine NULL check into IS_ERR_OR_NULL()   Punit Agrawal
• [U-Boot] [PATCH 3/4] imx: hab: Specify IVT padding size   Breno Matheus Lima
• [U-Boot] [PATCH] dm: core: make fixed-clock dt scan live dt compatible   Simon Glass
• [U-Boot] [PATCH v2] core: ofnode: Fix translation for #size-cells == 0   Simon Glass
• [U-Boot] [PATCH v2 01/10] syscon: dm: Add a new method to get a regmap from DTS   Simon Glass
• [U-Boot] [PATCH v2 02/10] usb: omap5: Add glue logic to support DM for USB host   Simon Glass
• [U-Boot] [PATCH] serial: bcm6345: convert to use live dt   Simon Glass
• [U-Boot] [PATCH] clk: bcm6345: convert to use live dt   Simon Glass
• [U-Boot] [PATCH] drivers: reset: convert to use live dt   Simon Glass
• [U-Boot] [PATCH] gpio: bcm6345: convert to use live dt   Simon Glass
• [U-Boot] [PATCH 1/2] led: bcm6358: convert to use live dt   Simon Glass
• [U-Boot] [PATCH 2/2] led: bcm6328: convert to use live dt   Simon Glass
• [U-Boot] [PATCH] power: domain: bcm6328: convert to use live dt   Simon Glass
• [U-Boot] [PATCH 1/2] spi: bcm63xx_spi: convert to use live dt   Simon Glass
• [U-Boot] [PATCH 2/2] spi: bcm63xx_hsspi: convert to use live dt   Simon Glass
• [U-Boot] [PATCH] ram: bmips: convert to use live dt   Simon Glass
• [U-Boot] [PATCH] watchdog: bcm6345: convert to use live dt   Simon Glass
• [U-Boot] [PATCH 1/1] bios_emulator: remove assignment without effect   Simon Glass
• [U-Boot] [PATCH 1/1] regulator: pbias: don't evaluate variable before assignment   Simon Glass
• [U-Boot] [PATCH v1] rtc: rewrite isl1208 to support DM   Simon Glass
• [U-Boot] [PATCH v3] x86: zImage: pass device tree setup data to the kernel   Simon Glass
• [U-Boot] [PATCH 2/2] usb: kbd: implement special keys   Simon Glass
• [U-Boot] [PATCH 1/2] stm32mp: cleanup cpu.c   Patrick Delaunay
• [U-Boot] [PATCH 2/2] stm32mp: add check of cpu identifier   Patrick Delaunay
• [U-Boot] Moving the rk_board_late_init() hook to a device-model based implementation.   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2] rtc: rewrite isl1208 to support DM   Klaus Goger
• [U-Boot] [PATCH 2/2] video: rk3399_mipi: Combine NULL check into IS_ERR_OR_NULL()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] video: rk3288_mipi: Combine NULL check into IS_ERR_OR_NULL()   Heinrich Schuchardt
• [U-Boot] [PATCH v3] rtc: rewrite isl1208 to support DM   Klaus Goger
• [U-Boot] [PATCH 0/6] i.MX6DL: Add BTicino Mamoj board support   Jagan Teki
• [U-Boot] [PATCH 1/6] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support   Jagan Teki
• [U-Boot] [PATCH 2/6] i.MX6DL: mamoj: Add I2C support   Jagan Teki
• [U-Boot] [PATCH 3/6] i.MX6DL: mamoj: Add PFUZE100 support   Jagan Teki
• [U-Boot] [PATCH 4/6] configs: imx6dl_mamoj: Enable fastboot and ums   Jagan Teki
• [U-Boot] [PATCH 5/6] configs: imx6dl-mamoj: Add DFU support   Jagan Teki
• [U-Boot] [PATCH 6/6] configs: imx6dl-mamoj: Add Falcon mode support   Jagan Teki
• [U-Boot] [PATCH v5 02/11] sunxi: Add SUN6I_P2WI kconfig entry   Jagan Teki
• [U-Boot] [PATCH v4 00/11] arm: sunxi: Use proper and meaningful Kconfig entries   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH 1/1] drivers: net: cpsw: remove superfluous assignment.   Joe Hershberger
• [U-Boot] [PATCH 1/1] net: macb: remove superfluous logical constraint   Joe Hershberger
• [U-Boot] dhcp command not populating dnsip environment variable   Joe Hershberger
• [U-Boot] [PATCH] net: Fix netretry condition   Joe Hershberger
• [U-Boot] [PATCH] net/phy/cortina.c: Update get_phy_id implementation   Joe Hershberger
• [U-Boot] [PATCH] net/phy/cortina: Add No firmware upload option   Joe Hershberger
• [U-Boot] [PATCH v8 1/3] Adding TCP and wget into u-boot   Duncan Hare
• [U-Boot] [PATCH 1/5] net: fec_mxc: Fix DM driver issue in recv   Joe Hershberger
• [U-Boot] [PATCH 2/5] net: fec_mxc: simplify fec_get_miibus   Joe Hershberger
• [U-Boot] [PATCH 3/5] net: fec: set dev->seq to priv->dev_id   Joe Hershberger
• [U-Boot] [PATCH] input: Drop PS/2 keyboard support   Simon Glass
• [U-Boot] [PATCH 4/5] net: fec: sharing MDIO for two enet controllers   Joe Hershberger
• [U-Boot] [PATCH 5/5] net: fex_mxc: add i.MX6UL/SX/SL compatible   Joe Hershberger
• [U-Boot] Fw: dhcp command not populating dnsip environment variable   Duncan Hare
• [U-Boot] Configs: various: remove dead defines   Tom Rini
• [U-Boot] ti_omap3_common: Add CONFIG_SYS_NS16550_COMx entries   Tom Rini
• [U-Boot] [U-Boot, v2] SPL: Add signature verification when loading image   Tom Rini
• [U-Boot] [U-Boot,v2,1/4] tools: env: Pass through indent   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] tools: env: Fix CamelCasing style violation   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] tools: env: Refactor write path of flash_io()   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] tools: env: Implement atomic replace for filesystem   Tom Rini
• [U-Boot] [U-Boot, v2, 01/15] tools/mkimage: add support for STM32 image format   Tom Rini
• [U-Boot] [U-Boot,v2,02/15] spl: add SPL_RESET_SUPPORT   Tom Rini
• [U-Boot] [U-Boot, v2, 03/15] arm: armv7: solve issue for timer_rate_hz in arch timer   Tom Rini
• [U-Boot] [U-Boot, v2, 04/15] dm: gpio: Convert stm32f7 driver to livetree   Tom Rini
• [U-Boot] [U-Boot, v2, 05/15] gpio: stm32f7_gpio: handle node ngpios   Tom Rini
• [U-Boot] [U-Boot, v2, 06/15] stm32mp: stm32f7_i2c: use calloc instead of kmalloc   Tom Rini
• [U-Boot] [U-Boot, v2, 07/15] arm: stm32: add new architecture for STM32MP family   Tom Rini
• [U-Boot] [U-Boot,v2,08/15] ram: stm32mp1: add driver   Tom Rini
• [U-Boot] [U-Boot,v2,09/15] pmic: add stpmu1 support   Tom Rini
• [U-Boot] [U-Boot, v2, 10/15] pinctrl: stm32: update pincontrol for stmp32mp157   Tom Rini
• [U-Boot] [U-Boot, v2, 11/15] reset: stm32: adapt driver for stm32mp1   Tom Rini
• [U-Boot] [U-Boot, v2, 11/15] reset: stm32: adapt driver for stm32mp1   Tom Rini
• [U-Boot] [U-Boot,v2,12/15] clk: add driver for stm32mp1   Tom Rini
• [U-Boot] [U-Boot, v2, 13/15] clk: stm32mp1: add clock tree initialization   Tom Rini
• [U-Boot] [U-Boot, v2, 14/15] dts: add device tree for STM32MP157C-ED1 board   Tom Rini
• [U-Boot] [U-Boot, v2, 15/15] board: st: add generic board for STM32MP1 family   Tom Rini
• [U-Boot] [U-Boot, 2/4] nand: Remove unused ppc4xx NAND driver and references   Tom Rini
• [U-Boot] [U-Boot, 3/4] pci: Remove unused ppc4xx variable from struct pci_controller   Tom Rini
• [U-Boot] [U-Boot,4/4] MAINTAINERS: Remove unused ppc4xx entry   Tom Rini
• [U-Boot] [U-Boot, v6, 01/10] optee: Add lib entries for sharing OPTEE code across ports   Tom Rini
• [U-Boot] [U-Boot,v6,02/10] optee: Add CONFIG_OPTEE_TZDRAM_SIZE   Tom Rini
• [U-Boot] [U-Boot,v6,03/10] optee: Add CONFIG_OPTEE_TZDRAM_BASE   Tom Rini
• [U-Boot] [U-Boot,v6,04/10] optee: Add CONFIG_OPTEE_LOAD_ADDR   Tom Rini
• [U-Boot] [U-Boot, v6, 05/10] optee: Add optee_image_get_entry_point()   Tom Rini
• [U-Boot] [U-Boot, v6, 06/10] optee: Add optee_image_get_load_addr()   Tom Rini
• [U-Boot] [U-Boot, v6, 07/10] optee: Add optee_verify_bootm_image()   Tom Rini
• [U-Boot] [U-Boot,v6,08/10] optee: Add error printout   Tom Rini
• [U-Boot] [U-Boot, v6, 09/10] image: Add IH_OS_TEE for TEE chain-load boot   Tom Rini
• [U-Boot] [U-Boot, v6, 10/10] bootm: optee: Add a bootm command for type IH_OS_TEE   Tom Rini
• [U-Boot] [PATCH] net: Drop CONFIG_ENC28J60   Tuomas Tynkkynen
• [U-Boot] [PATCH] net: Drop CONFIG_ENC28J60   Joe Hershberger
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH 2/2] usb: kbd: implement special keys   Tom Rini
• [U-Boot] [PATCH] dm: core: make fixed-clock dt scan live dt compatible   Andy Yan
• [U-Boot] Please pull u-boot-usb/topic-xhci   Bin Meng
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Please pull u-boot-usb/topic-xhci   Heinrich Schuchardt
• [U-Boot] [PATCH] ARM: am33xx: Inhibit re-initialization of DDR during RTC-only   Keerthy
• [U-Boot] [PATCH 1/7] mmc: ftsdc010: Drop non-dm code   Andes
• [U-Boot] [PATCH 2/7] board: Drop ftsdc010 non-dm code   Andes
• [U-Boot] [PATCH 3/7] Drop CONFIG_FTSDC010_BASE   Andes
• [U-Boot] [PATCH 4/7] Drop CONFIG_FTSDC010_NUMBER   Andes
• [U-Boot] [PATCH 5/7] mmc: ftsdc010: Migrate CONFIG_FTSDC010_SDIO to Kconfig   Andes
• [U-Boot] [PATCH 6/7] mmc: ftsdc010: Merge nds32_mmc to ftsdc010   Andes
• [U-Boot] [PATCH 7/7] configs: Drop CONFIG_MMC_NDS32   Andes
• [U-Boot] [PATCH 2/5] net: fec_mxc: simplify fec_get_miibus   Lothar Waßmann
• [U-Boot] [PATCH 4/5] net: fec: sharing MDIO for two enet controllers   Lothar Waßmann
• [U-Boot] [PATCH 2/5] net: fec_mxc: simplify fec_get_miibus   Peng Fan
• [U-Boot] [PATCH 1/4] spl: spl_mmc: provide one weak function spl_boot_partition   Patrick Delaunay
• [U-Boot] [PATCH 2/4] stm32mp1: add eMMC support for ED1   Patrick Delaunay
• [U-Boot] [PATCH 3/4] stm32mp1: get boot mode from BootRom   Patrick Delaunay
• [U-Boot] [PATCH 4/4] stm32mp1: select boot device and partition   Patrick Delaunay
• [U-Boot] [PATCH v2] Allow providing default environment from file   Rasmus Villemoes
• [U-Boot] [PATCH 1/4] arm: timer: get frequency for arch timer armv7 in cp15 cntfrq   Patrick Delaunay
• [U-Boot] [PATCH 3/4] clock: stm32mp1: add stgen clock source change support   Patrick Delaunay
• [U-Boot] [PATCH 4/4] stm32mp1: change STGEN clock source to HSE   Patrick Delaunay
• [U-Boot] [PATCH 2/4] stm32mp: add syscon for STGEN   Patrick Delaunay
• [U-Boot] [PATCH] kwbimage: Fix out of bounds access   Stefan Roese
• [U-Boot] [PATCH 1/2] Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig   Alex Kiernan
• [U-Boot] [PATCH 2/2] Cleanup CONFIG_VERSION_VARIABLE migration   Alex Kiernan
• [U-Boot] [PATCH] arm: stm32mp1: add PSCI support   Patrick Delaunay
• [U-Boot] [PATCH] arm: imx6: configure NoC on i.MX6DQP   Christian Gmeiner
• [U-Boot] Please pull u-boot-usb/topic-xhci   Marek Vasut
• [U-Boot] [PATCH] stm32mp: handle SYSRESET   Patrick Delaunay
• [U-Boot] Please pull u-boot-usb/topic-xhci   Marek Vasut
• [U-Boot] [PATCH] bootvx: use program header for loading   Christian Gmeiner
• [U-Boot] [PATCH 1/4] spl: spl_mmc: provide one weak function spl_boot_partition   Tom Rini
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Miquel Raynal
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Stefan Roese
• [U-Boot] Moving the rk_board_late_init() hook to a device-model based implementation.   Kever Yang
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Tom Rini
• [U-Boot] Moving the rk_board_late_init() hook to a device-model based implementation.   Alexander Kochetkov
• [U-Boot] [PATCH 1/4] spl: spl_mmc: provide one weak function spl_boot_partition   Lukasz Majewski
• [U-Boot] [PATCH 1/2] Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig   Lukasz Majewski
• [U-Boot] [PATCH v2] Allow providing default environment from file   Lukasz Majewski
• [U-Boot] [PATCH v3 01/20] spl: fix binman_sym output check   Maxime Ripard
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC, DM_SCSI   Maxime Ripard
• [U-Boot] [PATCH] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC   Kever Yang
• [U-Boot] [PATCH v2] Allow providing default environment from file   Rasmus Villemoes
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Miquel Raynal
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Stefan Roese
• [U-Boot] [PATCH] mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0   Jagdish Gediya
• [U-Boot] [PATCH] mtd: nand: fsl_ifc: Fix nand waitfunc return value   Jagdish Gediya
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Fabio Estevam
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH 4/5] net: fec: sharing MDIO for two enet controllers   Peng Fan
• [U-Boot] [PATCH v1 0/5] rtc: remove redundant code in rtc_reset   Chris Packham
• [U-Boot] [PATCH v1 1/5] rtc: ds1307: remove redundant code in rtc_reset   Chris Packham
• [U-Boot] [PATCH v1 2/5] rtc: ds1374: remove redundant code in rtc_reset   Chris Packham
• [U-Boot] [PATCH v1 3/5] rtc: mx27rtc: remove redundant code in rtc_reset   Chris Packham
• [U-Boot] [PATCH v1 4/5] rtc: rs5c372: remove redundant code in rtc_reset   Chris Packham
• [U-Boot] [PATCH v1 5/5] rtc: rx8025: remove redundant code in rtc_reset   Chris Packham
• [U-Boot] [PATCH 01/14] spi: atmel: Add ifdef for DM_GPIO code   Wenyou Yang
• [U-Boot] [PATCH 03/14] configs: gurnard: Move CONFIG_ATMEL_SPI to defconfigs   Wenyou Yang
• [U-Boot] [PATCH 12/14] spi: atmel: Drop non-dm code   Wenyou Yang
• [U-Boot] [PATCH 13/14] spi: atmel: Drop atmel_spi.h   Wenyou Yang
• [U-Boot] [PATCH 14/14] spi: atmel: default y if DM_SPI && ARCH_AT91   Wenyou Yang
• [U-Boot] [PATCH 3/4] imx: hab: Specify IVT padding size   Bryan O'Donoghue
• [U-Boot] [PATCH v1 01/19] phy: marvell: a3700: Change return type of macro MVEBU_REG   Stefan Roese
• [U-Boot] [PATCH v1 02/19] phy: marvell: a3700: Use reg_set16 instead of phy_write16   Stefan Roese
• [U-Boot] [PATCH v1 03/19] phy: marvell: a3700: Don't create functional macro for each register   Stefan Roese
• [U-Boot] [PATCH v1 04/19] phy: marvell: a3700: Use same timeout for all register polling   Stefan Roese
• [U-Boot] [PATCH v1 05/19] phy: marvell: a3700: Use (!ret) instead of (ret == 0)   Stefan Roese
• [U-Boot] [PATCH v1 06/19] phy: marvell: a3700: Use reg_set_indirect istead of 2 reg_sets   Stefan Roese
• [U-Boot] [PATCH v1 07/19] phy: marvell: a3700: Access USB3 register indirectly on lane 2   Stefan Roese
• [U-Boot] [PATCH V2 1/5] net: fec_mxc: Fix DM driver issue in recv   Peng Fan
• [U-Boot] [PATCH V2 2/5] net: fec_mxc: simplify fec_get_miibus   Peng Fan
• [U-Boot] [PATCH V2 3/5] net: fec: set dev->seq to priv->dev_id   Peng Fan
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Peng Fan
• [U-Boot] [PATCH V2 5/5] net: fex_mxc: add i.MX6UL/SX/SL compatible   Peng Fan
• [U-Boot] [PATCH v1 08/19] phy: marvell: a3700: Set USB3 RX wait depending on ref clock   Stefan Roese
• [U-Boot] [PATCH 0/5] libfdt: make lib/libfdt/ more synced with scripts/dtc/libfdt/   Masahiro Yamada
• [U-Boot] [PATCH 1/5] libfdt: move FDT_RAMDISK_OVERHEAD to image-fdt.c   Masahiro Yamada
• [U-Boot] [PATCH 2/5] fdt_region: remove unneeded fdt_internal.h inclusion   Masahiro Yamada
• [U-Boot] [PATCH 3/5] image.h: add forward declaration of struct fdt_region   Masahiro Yamada
• [U-Boot] [PATCH 4/5] fdt_region: move fdt_region.c to common/ from lib/libfdt/   Masahiro Yamada
• [U-Boot] [PATCH 5/5] libfdt: split fdt_region declarations out to <fdt_region.h>   Masahiro Yamada
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Peng Fan
• [U-Boot] [PATCH v1 09/19] phy: marvell: a3700: revise the USB3 comphy setting during power on   Stefan Roese
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Jagan Teki
• [U-Boot] [PATCH v1 10/19] phy: marvell: mux: Support nontrivial node order in selector register   Stefan Roese
• [U-Boot] [PATCH v1 11/19] phy: marvell: a3700: Use comphy_mux on Armada 37xx.   Stefan Roese
• [U-Boot] [PATCH v1 12/19] phy: marvell: a3700: Save/restore selector reg in SGMII init   Stefan Roese
• [U-Boot] [PATCH v1 13/19] arm64: mvebu_armada_37xx: Use Armada 37xx pinctrl driver by default   Stefan Roese
• [U-Boot] [PATCH] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC   Wadim Egorov
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Peng Fan
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Jagan Teki
• [U-Boot] [PATCH v1 14/19] driver: clk: Add support for clocks on Armada 37xx   Stefan Roese
• [U-Boot] [PATCH v1 15/19] spi: mvebu_a3700_spi: Use Armada 37xx clk driver for SPI clock frequency   Stefan Roese
• [U-Boot] [PATCH v1 16/19] clk: armada-37xx: Support soc_clk_dump   Stefan Roese
• [U-Boot] [PATCH v1 17/19] pinctrl: armada-37xx: Fix SB pinctrl groups according to new revision   Stefan Roese
• [U-Boot] [PATCH v1 18/19] phy: marvell: core: Cosmetic fixes   Stefan Roese
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Peng Fan
• [U-Boot] [PATCH v1 19/19] net: mvneta: Fix fault when wrong device tree   Stefan Roese
• [U-Boot] [PATCH v1 19/19] net: mvneta: Fix fault when wrong device tree   Stefan Roese
• [U-Boot] [PATCH v2 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Stefan Roese
• [U-Boot] [PATCH v2 2/7] bootcount: Add include guards into bootcount.h file   Stefan Roese
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Jagan Teki
• [U-Boot] [PATCH v2 4/7] bootcount: u-boot: Do not increment bootcount if already done in SPL   Stefan Roese
• [U-Boot] [PATCH v2 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH v2 6/7] bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking   Stefan Roese
• [U-Boot] [PATCH v2 7/7] bootcount: display5: config: Enable boot count feature in the display5 board   Stefan Roese
• [U-Boot] git clone http://git.denx.de/u-boot-arc.git doesn't work   Alexey Brodkin
• [U-Boot] [PATCH v2 1/7] bootcount: spl: Enable bootcount support in SPL   Stefan Roese
• [U-Boot] [PATCH v2 5/7] bootcount: spl: Extend SPL to support bootcount incrementation   Stefan Roese
• [U-Boot] [PATCH] usb: dwc2_udc_otg: Add gotgctl customization   Patrice CHOTARD
• [U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver   Maxime Ripard
• [U-Boot] [PATCH v2 5/7] bootcount: spl: Extend SPL to support bootcount incrementation   Lukasz Majewski
• [U-Boot] [PATCH v2 00/20] ARC: cache subsystem improvement/refactoring   Eugeniy Paltsev
• [U-Boot] [PATCH v2 01/20] ARC: cache: move i$ entire operation to separate function   Eugeniy Paltsev
• [U-Boot] [PATCH v2 02/20] ARC: cache: remove per-line I$ operations as unused   Eugeniy Paltsev
• [U-Boot] [PATCH v2 03/20] ARC: cache: Add support of FLUSH_N_INV d$ operations   Eugeniy Paltsev
• [U-Boot] [PATCH v2 04/20] ARC: introduce is_isa_X functions   Eugeniy Paltsev
• [U-Boot] [PATCH v2 05/20] ARC: flush & invalidate D$ with a single command   Eugeniy Paltsev
• [U-Boot] [PATCH v2 06/20] ARC: cache: move IOC initialization to separate function   Eugeniy Paltsev
• [U-Boot] [PATCH v2 07/20] ARC: move BCR encodings to separate header file   Eugeniy Paltsev
• [U-Boot] [PATCH v2 08/20] ARC: cache: allways check dcache status before entire/line operations   Eugeniy Paltsev
• [U-Boot] [PATCH v2 09/20] ARC: cache: Use is_isa_arcv2() instead of CONFIG_ISA_ARCV2 ifdef   Eugeniy Paltsev
• [U-Boot] [PATCH v2 10/20] ARC: cache: move slc status check into slc_entire_op and slc_rgn_op   Eugeniy Paltsev
• [U-Boot] [PATCH v2 11/20] ARC: cache: get rid of [slc, pae, icache, dcache]_exists global variables   Eugeniy Paltsev
• [U-Boot] [PATCH v2 12/20] ARC: move cache global variables to global data struct   Eugeniy Paltsev
• [U-Boot] [PATCH v2 13/20] ARC: cache: move pae exists check into slc_upper_region_init   Eugeniy Paltsev
• [U-Boot] [PATCH v2 14/20] ARC: move IOC enabling to compile time options   Eugeniy Paltsev
• [U-Boot] [PATCH v2 15/20] ARC: cache: implement [i, d]cache_enabled as separate functions   Eugeniy Paltsev
• [U-Boot] [PATCH v2 16/20] ARC: cache: fix SLC operations when SLC is bypassed for data   Eugeniy Paltsev
• [U-Boot] [PATCH v2 17/20] ARC: implement function to sync and cleanup caches   Eugeniy Paltsev
• [U-Boot] [PATCH v2 18/20] ARC: cache: add additional configuration checks   Eugeniy Paltsev
• [U-Boot] [PATCH v2 19/20] ARC: cache: add missing cache cleanup before cache disable   Eugeniy Paltsev
• [U-Boot] [PATCH v2 20/20] ARC: cache: refactor arc_ioc_setup function   Eugeniy Paltsev
• [U-Boot] [PATCH] bootvx: use program header for loading   Bin Meng
• [U-Boot] [PATCH 2/5] i.MX6: Change SYS_SOC from mx6 to imx6   Fabio Estevam
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Peng Fan
• [U-Boot] [PATCH] arm: dts: am4372: fix DTC warnings   Felipe Balbi
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Tom Rini
• [U-Boot] [PATCH] arm: dts: am4372: fix DTC warnings   Tom Rini
• [U-Boot] [PATCH] armv8: ls1088qds: Remove CONFIG_ from local defines for FPGA   York Sun
• [U-Boot] [PATCH 1/2] armv8: ls1088a: Add clock related function in CONFIG_SPL_BUILD   York Sun
• [U-Boot] [PATCH 2/2] armv8: ls1088a: Add i2c_early_init() func for LS1088AQDS   York Sun
• [U-Boot] [PATCH v2] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088   York Sun
• [U-Boot] [PATCH v2] LS2088ARDB: Secure Boot: Fix fall back option failure   York Sun
• [U-Boot] [PATCH] bootvx: use program header for loading   Christian Gmeiner
• [U-Boot] [PATCH][v2] mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0   Jagdish Gediya
• [U-Boot] [PATCH][v2] mtd: nand: fsl_ifc: Fix nand waitfunc return value   Jagdish Gediya
• [U-Boot] [PATCH 2/5] i.MX6: Change SYS_SOC from mx6 to imx6   Jagan Teki
• [U-Boot] [PATCH 2/5] i.MX6: Change SYS_SOC from mx6 to imx6   Fabio Estevam
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Jagan Teki
• [U-Boot] [PATCH 2/5] i.MX6: Change SYS_SOC from mx6 to imx6   Jagan Teki
• [U-Boot] [PATCH 0/5] DW SPI: fixes and improvements   Jagan Teki
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Joe Hershberger
• [U-Boot] [PATCH v4 01/19] sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware   Jagan Teki
• [U-Boot] [PATCH 2/5] i.MX6: Change SYS_SOC from mx6 to imx6   Fabio Estevam
• [U-Boot] [PATCH] ARC: HSDK: add platform-specific commands   Eugeniy Paltsev
• [U-Boot] [PATCH 2/5] i.MX6: Change SYS_SOC from mx6 to imx6   Jagan Teki
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Jagan Teki
• [U-Boot] [PATCH v4 01/19] sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware   André Przywara
• [U-Boot] [PATCH 0/5] DW SPI: fixes and improvements   Alexey Brodkin
• [U-Boot] [PATCH v4 01/19] sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware   Jagan Teki
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Joe Hershberger
• [U-Boot] [PATCH 2/5] net: fec_mxc: simplify fec_get_miibus   Joe Hershberger
• [U-Boot] [PATCH 1/5] DW SPI: fix tx data loss on FIFO flush   Jagan Teki
• [U-Boot] [PATCH V2 5/5] net: fex_mxc: add i.MX6UL/SX/SL compatible   Jagan Teki
• [U-Boot] [PATCH 2/5] net: fec_mxc: simplify fec_get_miibus   Joe Hershberger
• [U-Boot] [PATCH V2 5/5] net: fex_mxc: add i.MX6UL/SX/SL compatible   Joe Hershberger
• [U-Boot] [PATCH v1 19/19] net: mvneta: Fix fault when wrong device tree   Joe Hershberger
• [U-Boot] [PATCH v4 01/19] sunxi: README.sunxi64: Add hint about non-debug of ARM Trusted Firmware   André Przywara
• [U-Boot] [PATCH V2 5/5] net: fex_mxc: add i.MX6UL/SX/SL compatible   Joe Hershberger
• [U-Boot] [PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH V2 5/5] net: fex_mxc: add i.MX6UL/SX/SL compatible   Peng Fan
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Peng Fan
• [U-Boot] [PATCH] arm: dts: am4372: fix DTC warnings   Felipe Balbi
• [U-Boot] [PATCH] spi: fsl_qspi: Introduce is_controller_busy function   Rajat Srivastava
• [U-Boot] [PATCH] pci: Fix decode regions for memory banks   Bin Meng
• [U-Boot] [PATCH] bootvx: use program header for loading   Bin Meng
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Calvin Johnson
• [U-Boot] [PATCH v2 0/5] DW SPI: fixes and improvements   Eugeniy Paltsev
• [U-Boot] [PATCH v2 1/5] DW SPI: fix tx data loss on FIFO flush   Eugeniy Paltsev
• [U-Boot] [PATCH v2 2/5] DW SPI: fix transmit only mode   Eugeniy Paltsev
• [U-Boot] [PATCH v2 3/5] DW SPI: refactor poll_transfer functions   Eugeniy Paltsev
• [U-Boot] [PATCH v2 4/5] DW SPI: add option to use external gpio for chip select   Eugeniy Paltsev
• [U-Boot] [PATCH v2 5/5] DW SPI: use 32 bit access instead of 16 and 32 bit mix   Eugeniy Paltsev
• [U-Boot] [PATCH] arm: dts: am4372: fix DTC warnings   Tom Rini
• [U-Boot] [PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH] drivers: spi: migrate cf_spi to DM   Angelo Dureghello
• [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig   Bin Meng
• [U-Boot] [PATCH] pci: Fix decode regions for memory banks   Bernhard Messerklinger
• [U-Boot] [PATCH v2 0/5] DW SPI: fixes and improvements   Jagan Teki
• [U-Boot] [PATCH v2 0/5] DW SPI: fixes and improvements   Alexey Brodkin
• [U-Boot] [PATCH v2 0/5] DW SPI: fixes and improvements   Jagan Teki
• [U-Boot] [PATCH v2 0/5] DW SPI: fixes and improvements   Alexey Brodkin
• [U-Boot] [PATCH V2 5/5] net: fex_mxc: add i.MX6UL/SX/SL compatible   Joe Hershberger
• [U-Boot] [PATCH V2 4/5] net: fec: sharing MDIO for two enet controllers   Joe Hershberger
• [U-Boot] [PATCH v2 00/17] bmips: convert to use live-dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 01/17] dm: core: add functions to get memory-mapped I/O addreses   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 02/17] watchdog: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 03/17] serial: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 04/17] clk: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 05/17] reset: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 06/17] gpio: bcm6345: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 07/17] led: bcm6358: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 08/17] led: bcm6328: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 09/17] power: domain: bcm6328: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 10/17] spi: bcm63xx_spi: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 11/17] spi: bcm63xx_hsspi: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 12/17] ram: bmips: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 13/17] cpu: bmips: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 14/17] phy: bcm6348-usbh: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 15/17] phy: bcm6358-usbh: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 16/17] phy: bcm6368-usbh: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 17/17] phy: bcm6318-usbh: convert to use live dt   Álvaro Fernández Rojas
• [U-Boot] [PATCH] ARC: HSDK: add platform-specific commands   Alexey Brodkin
• [U-Boot] tools: Make kwboot build if HOST_TOOLS_ALL=y   Tom Rini
• [U-Boot] [U-Boot, v4, 1/7] spi: spi_flash: do not fail silently on bad user input   Tom Rini
• [U-Boot] [U-Boot,v4,2/7] cmd: sf: fix map_physmem check   Tom Rini
• [U-Boot] [U-Boot,v4,3/7] test/py: README: fix typo   Tom Rini
• [U-Boot] [U-Boot, v4, 4/7] test/py: README: add HOSTNAME to PYTHONPATH   Tom Rini
• [U-Boot] [U-Boot, v4, 5/7] test/py: do not import pytest multiple times   Tom Rini
• [U-Boot] [U-Boot,v4,6/7] test/py: add generic CRC32 function   Tom Rini
• [U-Boot] [U-Boot,v4,7/7] test/py: add spi_flash tests   Tom Rini
• [U-Boot] davinci: omapl138_lcdk: fix PLL0 frequency   Tom Rini
• [U-Boot] scripts/check-config.sh: fix "command not found" error handling   Tom Rini
• [U-Boot] [U-Boot, 1/2] gpio: omap_gpio: Add DM_FLAG_PRE_RELOC flag   Tom Rini
• [U-Boot] [U-Boot, 2/2] configs: am335x_evm: Increase SPL_SYS_MALLOC_F_LEN to accomodate gpio_devices   Tom Rini
• [U-Boot] [U-Boot,v2] davinci: Enable DDR_INIT for DA8XX   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: dts: da850-lcdk: Sync from Linux 4.16   Tom Rini
• [U-Boot] [U-Boot,2/2] configs: omapl138: Enable DM and DT   Tom Rini
• [U-Boot] [PATCH] sunxi: Add support for LiNova1 CTP 7" HMI   Giulio Benetti
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH] sunxi: Add support for LiNova1 CTP 7" HMI   Giulio Benetti
• [U-Boot] [PATCH 1/3] configs: k2g_hs_evm: Resync defconfig with non-HS defconfig   Andrew F. Davis
• [U-Boot] [PATCH 2/3] configs: k2e_hs_evm: Resync defconfig with non-HS defconfig   Andrew F. Davis
• [U-Boot] [PATCH 3/3] configs: k2hk_hs_evm: Resync defconfig with non-HS defconfig   Andrew F. Davis
• [U-Boot] [PATCH] env: Properly check for BLK support   Sjoerd Simons
• [U-Boot] [PATCH] omap3: spi: Correct ti, pindir-d0-out-d1-in parsing   Sjoerd Simons
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [RFC] Make U-Boot log great again   Bin Meng
• [U-Boot] [PATCH] dm: i2c: implement gpio-based I2C deblock   Heiko Schocher
• [U-Boot] [PATCH] dm: i2c: implement gpio-based I2C deblock   Heiko Schocher
• [U-Boot] [PATCH] dm: i2c: implement gpio-based I2C deblock   Alexander Kochetkov
• [U-Boot] [PATCH] dm: i2c: implement gpio-based I2C deblock   Heiko Schocher
• [U-Boot] [PATCH v2 0/6] Add 3GiB DRAM support to 64-bit Allwinner SoCs   Icenowy Zheng
• [U-Boot] [PATCH v2 1/6] sunxi: map DRAM part with 3G size on AArch64   Icenowy Zheng
• [U-Boot] [PATCH v2 2/6] sunxi: add Kconfig option for the maximum accessible DRAM   Icenowy Zheng
• [U-Boot] [PATCH v2 3/6] sunxi: let sunxi_dram_init return unsigned long long   Icenowy Zheng
• [U-Boot] [PATCH v2 4/6] sunxi: restrict the ram_size to the accessible range in SPL   Icenowy Zheng
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Icenowy Zheng
• [U-Boot] [PATCH v2 6/6] sunxi: add size recalculation code for common DesignWare DRAM driver   Icenowy Zheng
• [U-Boot] [PATCH v2 2/6] sunxi: add Kconfig option for the maximum accessible DRAM   Maxime Ripard
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Maxime Ripard
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Icenowy Zheng
• [U-Boot] [PATCH v2 2/6] sunxi: add Kconfig option for the maximum accessible DRAM   Chen-Yu Tsai
• [U-Boot] [PATCH v2 4/6] sunxi: restrict the ram_size to the accessible range in SPL   Maxime Ripard
• [U-Boot] [PATCH v2 2/6] sunxi: add Kconfig option for the maximum accessible DRAM   Icenowy Zheng
• [U-Boot] [PATCH 1/2] Makefile: always preserve output for images that can contain HAB Blocks   Rasmus Villemoes
• [U-Boot] [PATCH 2/2] tools/imximage: use 0x prefix in HAB Blocks line   Rasmus Villemoes
• [U-Boot] [PATCH 0/2] ARC: HSDK: add platform-specific commands   Eugeniy Paltsev
• [U-Boot] [PATCH 1/2] ARC: bootm: refactor GO and PREP subcommands implementation   Eugeniy Paltsev
• [U-Boot] [PATCH 2/2] ARC: HSDK: add platform-specific commands   Eugeniy Paltsev
• [U-Boot] [PATCH 1/2] Makefile: always preserve output for images that can contain HAB Blocks   Fabio Estevam
• [U-Boot] [PATCH 2/2] tools/imximage: use 0x prefix in HAB Blocks line   Fabio Estevam
• [U-Boot] Please pull ARC changes   Alexey Brodkin
• [U-Boot] Please pull ARC changes   Tom Rini
• [U-Boot] Please pull ARC changes   Alexey Brodkin
• [U-Boot] [PATCH v1 10/19] phy: marvell: mux: Support nontrivial node order in selector register   Marek Behún
• [U-Boot] [PATCH v3] sandbox: Add 64-bit sandbox   Simon Glass
• [U-Boot] Please pull ARC changes   Tom Rini
• [U-Boot] [PATCH v2 01/11] efi_loader: efi_smbios_register should have a return value   Simon Glass
• [U-Boot] [PATCH v2 02/11] efi_loader: return efi_status_t from efi_gop_register   Simon Glass
• [U-Boot] [PATCH v2 03/11] efi_loader: return efi_status_t from efi_net_register   Simon Glass
• [U-Boot] [PATCH v2 04/11] efi_loader: consistently return efi_status_t efi_watchdog_register   Simon Glass
• [U-Boot] [PATCH v2 05/11] efi_loader: simplify calling efi_init_obj_list   Simon Glass
• [U-Boot] [PATCH v2 06/11] efi_loader: exit status for efi_reset_system_init   Simon Glass
• [U-Boot] [PATCH v2 07/11] efi_loader: efi_get_time_init should return status code   Simon Glass
• [U-Boot] [PATCH v2 08/11] efi_loader: do_bootefi_exec should always return an EFI status code   Simon Glass
• [U-Boot] [PATCH v2 09/11] efi_loader: check initialization of EFI subsystem is successful   Simon Glass
• [U-Boot] [PATCH v2 10/11] efi_loader: support device tree for bootefi selftest   Simon Glass
• [U-Boot] [PATCH v1 1/5] rtc: ds1307: remove redundant code in rtc_reset   Simon Glass
• [U-Boot] [PATCH v2 11/11] efi_selftest: check installation of the device tree   Simon Glass
• [U-Boot] [PATCH 1/5] libfdt: move FDT_RAMDISK_OVERHEAD to image-fdt.c   Simon Glass
• [U-Boot] [PATCH 2/5] fdt_region: remove unneeded fdt_internal.h inclusion   Simon Glass
• [U-Boot] [PATCH 3/5] image.h: add forward declaration of struct fdt_region   Simon Glass
• [U-Boot] [PATCH 4/5] fdt_region: move fdt_region.c to common/ from lib/libfdt/   Simon Glass
• [U-Boot] [PATCH 5/5] libfdt: split fdt_region declarations out to <fdt_region.h>   Simon Glass
• [U-Boot] [PATCH v2 01/17] dm: core: add functions to get memory-mapped I/O addreses   Daniel Schwierzeck
• [U-Boot] [GIT PULL] Xilinx patches for v2018.05   Michal Simek
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Simon Glass
• [U-Boot] [PATCH] scripts: use CROSS_COMPILE environment variable   Stefan Agner
• [U-Boot] [PATCH 5/5] libfdt: split fdt_region declarations out to <fdt_region.h>   Masahiro Yamada
• [U-Boot] [PATCH] scripts: use CROSS_COMPILE environment variable   Lukasz Majewski
• [U-Boot] Depending on an .o file in other directory in Kbuild?   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/2] ARC: HSDK: add platform-specific commands   Alexey Brodkin
• [U-Boot] [PATCH 5/5] libfdt: split fdt_region declarations out to <fdt_region.h>   Simon Glass
• [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig   Joe Hershberger
• [U-Boot] [PATCH v2 01/17] dm: core: add functions to get memory-mapped I/O addreses   Álvaro Fernández Rojas
• [U-Boot] [PATCH] omap3: spi: Correct ti, pindir-d0-out-d1-in parsing   Jagan Teki
• [U-Boot] [PATCH v2 01/17] dm: core: add functions to get memory-mapped I/O addreses   Daniel Schwierzeck
• [U-Boot] [PATCH v2 01/17] dm: core: add functions to get memory-mapped I/O addreses   Daniel Schwierzeck
• [U-Boot] [PATCH v2 02/17] watchdog: bcm6345: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 03/17] serial: bcm6345: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 04/17] clk: bcm6345: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 05/17] reset: bcm6345: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 06/17] gpio: bcm6345: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 07/17] led: bcm6358: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 08/17] led: bcm6328: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 09/17] power: domain: bcm6328: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 10/17] spi: bcm63xx_spi: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 11/17] spi: bcm63xx_hsspi: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 12/17] ram: bmips: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 13/17] cpu: bmips: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 14/17] phy: bcm6348-usbh: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 15/17] phy: bcm6358-usbh: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 16/17] phy: bcm6368-usbh: convert to use live dt   Daniel Schwierzeck
• [U-Boot] [PATCH v2 17/17] phy: bcm6318-usbh: convert to use live dt   Daniel Schwierzeck
• [U-Boot] dhcp command not populating dnsip environment variable   dh at synoia.com
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Jagan Teki
• [U-Boot] [PATCH 1/2] efi_loader: initialize ethernet device path fully   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] i2c: lpi2c: remove superfluous assignments   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/3] Convert CONFIG_UBIFS_SILENCE_MSG to Kconfig   Heiko Schocher
• [U-Boot] [PATCH v2 11/11] efi_selftest: check installation of the device tree   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] log: fix typo LOGL_EFI   Heinrich Schuchardt
• [U-Boot] [PATCH v2 02/11] efi_loader: return efi_status_t from efi_gop_register   Heinrich Schuchardt
• [U-Boot] [PATCH][v3] mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0   Jagdish Gediya
• [U-Boot] [PATCH v3 0/3] Convert CONFIG_UBI_SILENCE_MSG and CONFIG_UBIFS_SILENCE_MSG to Kconfig   Petr Vorel
• [U-Boot] [PATCH v3 1/3] ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG   Petr Vorel
• [U-Boot] [PATCH v3 2/3] Convert CONFIG_UBIFS_SILENCE_MSG to Kconfig   Petr Vorel
• [U-Boot] [PATCH v3 3/3] Convert CONFIG_UBI_SILENCE_MSG to Kconfig   Petr Vorel
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   André Przywara
• [U-Boot] [PATCH] power: pwm regulator: support live tree   Andy Yan
• [U-Boot] [PATCH] sysreset: rockchip: use dev_read_addr_ptr get cru base   Andy Yan
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH v3 1/3] ubifs: Reintroduce using CONFIG_UBIFS_SILENCE_MSG   Heiko Schocher
• [U-Boot] [PATCH v3 2/3] Convert CONFIG_UBIFS_SILENCE_MSG to Kconfig   Heiko Schocher
• [U-Boot] [PATCH v3 3/3] Convert CONFIG_UBI_SILENCE_MSG to Kconfig   Heiko Schocher
• [U-Boot] Pull request: u-boot-ubi/master   Heiko Schocher
• [U-Boot] [PATCH 1/1] configs: sunxi: enable BLK, DM_MMC, DM_SCSI   Heinrich Schuchardt
• [U-Boot] [PATCH] sysreset: rockchip: use dev_read_addr_ptr get cru base   Dr. Philipp Tomsich
• [U-Boot] [RFC] net: eth_write_hwaddr hides ENOSYS   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] mmc: avoid division by zero in meson_mmc_config_clock   Heinrich Schuchardt
• [U-Boot] [PATCHv3 0/2] Changes to Z-turn dtd   Anton Gerasimov
• [U-Boot] [PATCHv3 1/2] ARM: dts: zynq: Update dts for Z-turn board   Anton Gerasimov
• [U-Boot] [PATCHv3 2/2] ARM: dts: zynq: Rename dts for Z-turn board   Anton Gerasimov
• [U-Boot] [PATCH 0/2] efi_loader: (network) event handling   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: RestoreTPL should execute queued events   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: use TPL_NOTIFY for network timer event   Heinrich Schuchardt
• [U-Boot] [PATCH] Makefile: always preserve output for images that can contain HAB Blocks   Breno Matheus Lima
• [U-Boot] [PATCH] Makefile: always preserve output for images that can contain HAB Blocks   Breno Matheus Lima
• [U-Boot] [PATCH 1/2] Makefile: always preserve output for images that can contain HAB Blocks   Breno Matheus Lima
• [U-Boot] [PATCH 2/2] tools/imximage: use 0x prefix in HAB Blocks line   Breno Matheus Lima
• [U-Boot] [PATCHv3 1/2] ARM: dts: zynq: Update dts for Z-turn board   Alexander Graf
• [U-Boot] [PATCHv3 2/2] ARM: dts: zynq: Rename dts for Z-turn board   Alexander Graf
• [U-Boot] [PATCH 3/3] configs: k2hk_hs_evm: Resync defconfig with non-HS defconfig   Lokesh Vutla
• [U-Boot] uBoot Scripts BeagleBone Black Yocto   Benedikt Wiesnet
• [U-Boot] Composing multiple envs   Alex Kiernan
• [U-Boot] Composing multiple envs   Wolfgang Denk
• [U-Boot] [PATCH 1/3] arm: dts: sun7i: Update Ainol AW1 dts   Paul Kocialkowski
• [U-Boot] [PATCH 2/3] sunxi: Add USB0 ID detection pin to Ainol AW1 defconfig   Paul Kocialkowski
• [U-Boot] [PATCH 3/3] sunxi: Add extra I2C bus support to Ainol AW1 defconfig   Paul Kocialkowski
• [U-Boot] Composing multiple envs   Alex Kiernan
• [U-Boot] Composing multiple envs   Wolfgang Denk
• [U-Boot] Composing multiple envs   Alex Kiernan
• [U-Boot] [PATCH 1/2] efi_loader: initialize ethernet device path fully   Patrick Wildt
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Patrick Wildt
• [U-Boot] [PATCH] efi_loader: initialize device path on alloc   Patrick Wildt
• [U-Boot] [PATCH v9 1/3] Adding TCP and wget into u-boot   DH at synoia.com
• [U-Boot] [PATCH v9 2/3] Adding TCP   DH at synoia.com
• [U-Boot] [PATCH v9 3/3] Adding wget   DH at synoia.com
• [U-Boot] [PATCH v2 0/6] ARM: i.MX6: Add proper CONFIG names   Jagan Teki
• [U-Boot] [PATCH v2 1/6] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures   Jagan Teki
• [U-Boot] [PATCH v2 2/6] i.MX6: Change SYS_SOC from mx6 to imx6   Jagan Teki
• [U-Boot] [PATCH v2 3/6] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl   Jagan Teki
• [U-Boot] [PATCH v2 4/6] ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi   Jagan Teki
• [U-Boot] [PATCH v2 5/6] ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl   Jagan Teki
• [U-Boot] [PATCH v2 6/6] ARM: i.MX6: dts: Build dtb based on SOC type   Jagan Teki
• [U-Boot] [PATCH v2 2/6] i.MX6: Change SYS_SOC from mx6 to imx6   Fabio Estevam
• [U-Boot] [PATCH] efi_loader: initialize device path on alloc   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: initialize ethernet device path fully   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Patrick Wildt
• [U-Boot] [PATCH v3 07/10] drivers: usb: musb: add ti musb peripheral driver with driver model support   Sjoerd Simons
• [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig   Bin Meng
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: initialize ethernet device path fully   Heinrich Schuchardt
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Maxime Ripard
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Icenowy Zheng
• [U-Boot] [PATCH v2 2/6] i.MX6: Change SYS_SOC from mx6 to imx6   Lothar Waßmann
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Patrick Wildt
• [U-Boot] [PATCH 00/13] *** SUBJECT HERE ***   make at marvell.com
• [U-Boot] [PATCH 01/13] arm64: a37xx: dts: add gpio head file including   make at marvell.com
• [U-Boot] [PATCH 02/13] arm64: a37xx: defconfig: Enable PINCTRL and GPIO support for ESPRESSOBin board   make at marvell.com
• [U-Boot] [PATCH 03/13] arm64: a37xx: dts: Add pinctrl configuration for ESPRESSOBin board   make at marvell.com
• [U-Boot] [PATCH 04/13] arm64: a37xx: dts: Add additional pinctrl definition   make at marvell.com
• [U-Boot] [PATCH 05/13] arm64: a37xx: pinctrl: Fix number of pin in south bridge   make at marvell.com
• [U-Boot] [PATCH 06/13] arm64: a37xx: dts: Fix the number of GPIO on south bridge   make at marvell.com
• [U-Boot] [PATCH 07/13] arm64: a37xx: pinctrl: Fix the pin 23 on south bridge   make at marvell.com
• [U-Boot] [PATCH 08/13] arm64: a37xx: pinctrl: Fix gpio pin offset in register   make at marvell.com
• [U-Boot] [PATCH 09/13] arm64: a37xx: pinctrl: Correct mpp definitions   make at marvell.com
• [U-Boot] [PATCH 10/13] arm64: a37xx: dts: Correct mpp definitions   make at marvell.com
• [U-Boot] [PATCH 11/13] doc: a37xx: Introduce pinctrl device tree binding   make at marvell.com
• [U-Boot] [PATCH 12/13] Revert "arm64: a37xx: dts: Add pin control nodes to DT"   make at marvell.com
• [U-Boot] [PATCH 13/13] arm64: a37xx: remove old pinctrl implementation   make at marvell.com
• [U-Boot] [PATCH 0/3] AM437x: Add runtime DTB selection for QSPI Boot   Vignesh R
• [U-Boot] [PATCH 1/3] board: ti: am43xx: Define embedded_dtb_select for runtime DTB selection in U-boot   Vignesh R
• [U-Boot] [PATCH 2/3] ARM: dts: Add new "generic" am4372 device tree file.   Vignesh R
• [U-Boot] [PATCH 3/3] configs: am43xx_evm_qspiboot_defconfig: Move to DM   Vignesh R
• [U-Boot] [PATCH 0/5] *** SUBJECT HERE ***   make at marvell.com
• [U-Boot] [PATCH 1/5] arm64: a37xx: populate pcie memory region   make at marvell.com
• [U-Boot] [PATCH 2/5] arm64: a37xx: pci: add support for aardvark pcie driver   make at marvell.com
• [U-Boot] [PATCH 3/5] arm64: a37xx: defconfigs: enable aardvark pcie driver   make at marvell.com
• [U-Boot] [PATCH 4/5] arm64: a37xx: dts: enable pcie port   make at marvell.com
• [U-Boot] [PATCH 5/5] arm64: a37xx: defconfigs: enable PCI_CMD and E1000 driver   make at marvell.com
• [U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8   Vasyl Vavrychuk
• [U-Boot] [PATCH] armv8: layerscape: Avoid code duplication for TZASC Instantiation   Sriram Dash
• [U-Boot] [Patch v2] armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig   Ashish Kumar
• [U-Boot] How to access non Ethernet PHY from U-boot   Greg
• [U-Boot] [PATCH v2 0/2] SF: add support for sst26wf016, sst26wf032, sst26wf064   Eugeniy Paltsev
• [U-Boot] [PATCH v2 1/2] SPI Flash: add support of sst26wf* flash series   Eugeniy Paltsev
• [U-Boot] [PATCH v2 2/2] SF: add support for sst26wf016, sst26wf032, sst26wf064   Eugeniy Paltsev
• [U-Boot] [PATCH 1/3] arm: dts: sun7i: Update Ainol AW1 dts   Maxime Ripard
• [U-Boot] [PATCH 3/3] sunxi: Add extra I2C bus support to Ainol AW1 defconfig   Maxime Ripard
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Alexander Graf
• [U-Boot] [PATCH] arm: zynq: Handle ENXIO error return value properly   Michal Simek
• [U-Boot] [PATCH v3 0/5] ARM: i.MX6: Add proper CONFIG names   Jagan Teki
• [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures   Jagan Teki
• [U-Boot] [PATCH v3 2/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl   Jagan Teki
• [U-Boot] [PATCH v3 3/5] ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi   Jagan Teki
• [U-Boot] [PATCH v3 4/5] ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl   Jagan Teki
• [U-Boot] [PATCH v3 5/5] ARM: i.MX6: dts: Build dtb based on SOC type   Jagan Teki
• [U-Boot] [PATCH 3/3] sunxi: Add extra I2C bus support to Ainol AW1 defconfig   Paul Kocialkowski
• [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures   Stefano Babic
• [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures   Stefano Babic
• [U-Boot] [PATCH 1/3] arm: dts: sun7i: Update Ainol AW1 dts   Paul Kocialkowski
• [U-Boot] [PATCH v2 0/2] ARC: HSDK: add platform-specific stuff   Eugeniy Paltsev
• [U-Boot] [PATCH v2 1/2] ARC: HSDK: add platform-specific commands   Eugeniy Paltsev
• [U-Boot] [PATCH v2 2/2] ARC: HSDK: enable spi flash support   Eugeniy Paltsev
• [U-Boot] [PATCH 1/3] arm: dts: sun7i: Update Ainol AW1 dts   Maxime Ripard
• [U-Boot] [PATCH v2 2/2] ARC: HSDK: enable spi flash support   Alexey Brodkin
• [U-Boot] [PATCH v3 00/10] Add support for DM_USB for TI's DRA7 EVMs and AM57 EVMs platforms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 01/10] syscon: dm: Add a new method to get a regmap from DTS   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 02/10] usb: omap5: Add glue logic to support DM for USB host   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 03/10] phy: ti-pip3-phy: Add support for USB3 PHY   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 04/10] phy: Add a new driver for OMAP's USB2 PHYs   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 05/10] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 06/10] board; ti: am57xx: turn on USB clocks   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 07/10] dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 08/10] dts: dra7x: Disable USB1 on all evms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 09/10] configs: enable DM_USB for all the platforms of the DRA7 family   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 10/10] configs: am57xx_evm: Enable DM_USB and dependencies   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/2] ARC: HSDK: enable spi flash support   Eugeniy Paltsev
• [U-Boot] [PATCH v2 0/3] imx: hab: Add helper functions for scripted HAB auth   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/3] imximage: Encase majority of header in __ASSEMBLY__ declaration   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/3] imximage: Specify default IVT offset in IMX image   Bryan O'Donoghue
• [U-Boot] [PATCH v2 3/3] imx: hab: Provide hab_auth_img_or_fail command   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/3] imximage: Specify default IVT offset in IMX image   Fabio Estevam
• [U-Boot] [PATCH v3 0/3] NXP WaARP7 set serial# from OTP fuses for USB iSerial   Bryan O'Donoghue
• [U-Boot] [PATCH v3 1/3] imx: mx7: Fix CONFIG_SERIAL_TAG compilation   Bryan O'Donoghue
• [U-Boot] [PATCH v3 2/3] imx: mx7: Add comment to describe OTP TESTER registers   Bryan O'Donoghue
• [U-Boot] [PATCH v3 3/3] warp7: Set u-boot serial# based on OTP value   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/3] imximage: Specify default IVT offset in IMX image   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/3] imximage: Specify default IVT offset in IMX image   Fabio Estevam
• [U-Boot] [PATCH 1/2] image: fit: Show firmware configuration property if present   Michal Simek
• [U-Boot] [PATCH 2/2] image: fit: Show information about OS type in firwmare case too   Michal Simek
• [U-Boot] [PATCH v2 2/3] imximage: Specify default IVT offset in IMX image   Bryan O'Donoghue
• [U-Boot] [PATCH v3 0/2] imx: hab: Add helper functions for scripted HAB auth   Bryan O'Donoghue
• [U-Boot] [PATCH v3 1/2] imximage: Encase majority of header in __ASSEMBLY__ declaration   Bryan O'Donoghue
• [U-Boot] [PATCH v3 2/2] imx: hab: Provide hab_auth_img_or_fail command   Bryan O'Donoghue
• [U-Boot] [PATCH 3/3] configs: k2hk_hs_evm: Resync defconfig with non-HS defconfig   Andrew F. Davis
• [U-Boot] [PATCH] omap3_logic: Fix FDT ADDR for ramdisk booting   Adam Ford
• [U-Boot] [uboot-snps-arc] [PATCH v2 0/2] SF: add support for sst26wf016, sst26wf032, sst26wf064   Alexey Brodkin
• [U-Boot] [PATCH v3 07/10] drivers: usb: musb: add ti musb peripheral driver with driver model support   Simon Glass
• [U-Boot] [PATCH 0/3] rockchip: Improve SDHCI throughput on the RK3399-Q7 (puma-rk3399)   Philipp Tomsich
• [U-Boot] [PATCH 1/3] rockchip: defconfig: puma-rk3399: enable DMA for SDHCI controller   Philipp Tomsich
• [U-Boot] [PATCH 2/3] rockchip: mmc: update MAINTAINERS   Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: sdhci: support 8bit bus-width   Philipp Tomsich
• [U-Boot] [GIT PULL] Xilinx patches for v2018.05   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] Pull request: u-boot-ubi/master   Tom Rini
• [U-Boot] net: phy: Add PHY_RTL8211E_PINE64_GIGABIT_FIX for realtek phys   Joe Hershberger
• [U-Boot] Configs: Use the newly added PHY_RTL8211E_PINE64_GIGABIT_FIX   Joe Hershberger
• [U-Boot] net: mvpp2x: add check after calloc   Joe Hershberger
• [U-Boot] drivers: net: phy: Fix aquantia compilation with DM   Joe Hershberger
• [U-Boot] armv8: fsl-layerscape: Add support of GPIO structure   Joe Hershberger
• [U-Boot] drivers: net: pfe_eth: LS1012A PFE driver introduction   Joe Hershberger
• [U-Boot] drivers: net: pfe_eth: provide pfe commands   Joe Hershberger
• [U-Boot] drivers: net: pfe_eth: LS1012A PFE headers   Joe Hershberger
• [U-Boot] board: freescale: ls1012aqds: enable network support on ls1012aqds   Joe Hershberger
• [U-Boot] board: freescale: ls1012afrdm: enable network support on ls1012afrdm   Joe Hershberger
• [U-Boot] board: freescale: ls1012ardb: enable network support on ls1012ardb   Joe Hershberger
• [U-Boot] board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb   Joe Hershberger
• [U-Boot] armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure   Joe Hershberger
• [U-Boot] armv8: fsl-lsch2: configure pfe's DDR and HDBUS interfaces and ECC   Joe Hershberger
• [U-Boot] armv8: layerscape: csu: enable ns access to PFE registers   Joe Hershberger
• [U-Boot] configs: ls1012a: add pfe configuration for LS1012A   Joe Hershberger
• [U-Boot] net/phy/cortina.c: Update get_phy_id implementation   Joe Hershberger
• [U-Boot] net/phy/cortina: Add No firmware upload option   Joe Hershberger
• [U-Boot] net: Fix netretry condition   Joe Hershberger
• [U-Boot] net: Only access network devices after init   Joe Hershberger
• [U-Boot] lan7xxx: Require phylib   Joe Hershberger
• [U-Boot] drivers: net: cpsw: remove superfluous assignment.   Joe Hershberger
• [U-Boot] net: macb: remove superfluous logical constraint   Joe Hershberger
• [U-Boot] net: Drop CONFIG_ENC28J60   Joe Hershberger
• [U-Boot] [PATCH] watchdog: Add Cadence watchdog driver   Heinrich Schuchardt
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   evan.g.thompson at gmail.com
• [U-Boot] [PATCH v3] x86: zImage: Pass working device tree data to the kernel   Ivan Gorinov
• [U-Boot] [PATCH v3] x86: zImage: Pass working device tree data to the kernel   Bin Meng
• [U-Boot] [PATCH] ARM: am33xx: Inhibit re-initialization of DDR during RTC-only   Keerthy
• [U-Boot] How to access non Ethernet PHY from U-boot   Greg
• [U-Boot] configs: ls1012a: add pfe configuration for LS1012A   Calvin Johnson
• [U-Boot] [PATCH 3/3] configs: k2hk_hs_evm: Resync defconfig with non-HS defconfig   Lokesh Vutla
• [U-Boot] [PATCH v3 2/5] ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl   Lothar Waßmann
• [U-Boot] [PATCH] pci: Fix decode regions for memory banks   Bin Meng
• [U-Boot] [PATCH 1/2] dm: pci: Check board information pointer in decode_regions()   Bin Meng
• [U-Boot] [PATCH 2/2] dm: pci: Avoid setting a PCI region that has 0 size   Bin Meng
• [U-Boot] [PATCH] cmd: nvedit: Add filtering during env import   Alex Kiernan
• [U-Boot] [PATCH] cmd: nvedit: Add filtering during env import   Quentin Schulz
• [U-Boot] [PATCH 00/36] rockchip: clean up board file for rockchip SoCs   Kever Yang
• [U-Boot] [PATCH 01/36] rockchip: rk3288: move configure_l2ctlr back to rk3288   Kever Yang
• [U-Boot] [PATCH 02/36] rockchip: add common MACRO to enable sys arch timer   Kever Yang
• [U-Boot] [PATCH 03/36] rockchip: enable SYS_NS16550 for all SoCs by default   Kever Yang
• [U-Boot] [PATCH 04/36] rockchip: defconfig: remove CONFIG_SYS_NS16550   Kever Yang
• [U-Boot] [PATCH 05/36] rockchip: add STIMER_BASE for all SoCs   Kever Yang
• [U-Boot] [PATCH 06/36] rockchip: add IRAM_START_ADDR for all SoCs   Kever Yang
• [U-Boot] [PATCH 07/36] rockchip: rk3328: add BOOT_MODE_REG for rk3328   Kever Yang
• [U-Boot] [PATCH 08/36] rockchip: rk322x: remove use rockchip timer as sys timer   Kever Yang
• [U-Boot] [PATCH 09/36] rockchip: rk322x: sdram: use common udelay instead of rockchip_udelay   Kever Yang
• [U-Boot] [PATCH 10/36] rockchip: rk322x: prepare to use common board file   Kever Yang
• [U-Boot] [PATCH 11/36] rockchip: defconfig enable sysreset for rk3229 spl   Kever Yang
• [U-Boot] [PATCH 12/36] rockchip: rk3036: sdram: use udelay instead of rockchip_udelay   Kever Yang
• [U-Boot] [PATCH 13/36] rockchip: rk3036: remove sys timer   Kever Yang
• [U-Boot] [PATCH 14/36] rockchip: rk3036: prepare to use commong board file   Kever Yang
• [U-Boot] [PATCH 15/36] rockchip: declare sdram_init() in common header   Kever Yang
• [U-Boot] [PATCH 16/36] rockchip: sdram-common: add api to pass dram info to trust os   Kever Yang
• [U-Boot] [PATCH 17/36] rockchip: sdram_common: add common dram_init_banksize   Kever Yang
• [U-Boot] [PATCH 18/36] rockchip: rk3188: remove rockchip timer as sys timer   Kever Yang
• [U-Boot] [PATCH 19/36] rockchip: rk3188: prepare to use common board file   Kever Yang
• [U-Boot] [PATCH 20/36] rockchip: rk3128: remove rockchip timer as systimer   Kever Yang
• [U-Boot] [PATCH 21/36] rockchip: rk3128: prepare use common board file   Kever Yang
• [U-Boot] [PATCH 22/36] rockchip: dts: rk3288: update spl-boot-order   Kever Yang
• [U-Boot] [PATCH 23/36] rockchip: rk3288: remove rockchip timer for sys timer   Kever Yang
• [U-Boot] [PATCH 24/36] armv8: add timer_get_boot_us() for generic timer   Kever Yang
• [U-Boot] [PATCH 25/36] rockchip: rk3288: prepare to use common board file   Kever Yang
• [U-Boot] [PATCH 26/36] rockchip: rk1108: remove rockchip timer for sys timer   Kever Yang
• [U-Boot] [PATCH 27/36] rockchip: rv1108: prepare to use common board file   Kever Yang
• [U-Boot] [PATCH 28/36] rockchip: rk3328: prepare to use common board file   Kever Yang
• [U-Boot] [PATCH 29/36] rockchip: rk3368: prepare to use common board file   Kever Yang
• [U-Boot] [PATCH 30/36] rockchip: lion-rk3368: remove rockchip timer   Kever Yang
• [U-Boot] [PATCH 31/36] rockchip: rk3399: prepare to use common board file   Kever Yang
• [U-Boot] [PATCH 32/36] rockchip: remove rk_timer   Kever Yang
• [U-Boot] [PATCH 33/36] rockchip: dts: rk3399-firefly: enable uart2 in spl   Kever Yang
• [U-Boot] [PATCH 34/36] rockchip: spl-boot-order: do not enable with OF_PLATDATA   Kever Yang
• [U-Boot] [PATCH 35/36] rockchip: declear boot_devices in bootrom.h   Kever Yang
• [U-Boot] [PATCH 36/36] rockchip: add common board file for rockchip platform   Kever Yang
• [U-Boot] [PATCH] rockchip: clk: rk3188: update dpll settings to make EMAC work   Kever Yang
• [U-Boot] [PATCH 26/36] rockchip: rk1108: remove rockchip timer for sys timer   Andy Yan
• [U-Boot] [PATCH v2] power: pwm regulator: support live tree   Andy Yan
• [U-Boot] [PATCH 33/36] rockchip: dts: rk3399-firefly: enable uart2 in spl   Peter Robinson
• [U-Boot] [PATCH 22/36] rockchip: dts: rk3288: update spl-boot-order   Peter Robinson
• [U-Boot] FEC and EFI Simple Network   Patrick Wildt
• [U-Boot] [PATCH 1/2] efi_loader: complete efi_pxe_mode struct definition   Patrick Wildt
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Patrick Wildt
• [U-Boot] [PATCH] cmd: nvedit: Add filtering during env import   Alex Kiernan
• [U-Boot] [PATCH] cmd: nvedit: Add filtering during env import   Quentin Schulz
• [U-Boot] [PATCH] cmd: nvedit: Add filtering during env import   Quentin Schulz
• [U-Boot] [PATCH 1/1] sunxi: mmc: Fix phase delays   Stefan Mavrodiev
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Maxime Ripard
• [U-Boot] [PATCH] watchdog: Add Cadence watchdog driver   Michal Simek
• [U-Boot] [PATCH 00/16] Syncup DTS files with mainline Linux kernel   Michal Simek
• [U-Boot] [PATCH 01/16] arm64: zynqmp: Sync alignment with mainline   Michal Simek
• [U-Boot] [PATCH 02/16] arm64: zynqmp: Use maxim prefix for all maxim chips   Michal Simek
• [U-Boot] [PATCH 03/16] arm64: zynqmp: Use i2c-mux instead of i2cswitch instead   Michal Simek
• [U-Boot] [PATCH 04/16] arm64: zynqmp: Sync up license with mainline kernel   Michal Simek
• [U-Boot] [PATCH 05/16] arm64: zynqmp: Remove additional comments from dts files   Michal Simek
• [U-Boot] [PATCH 06/16] arm64: zynqmp: Use keycode from input/input.h   Michal Simek
• [U-Boot] [PATCH 07/16] arm64: zynqmp: Use s/_/-/g in node name for zcu102 rev1.0   Michal Simek
• [U-Boot] [PATCH 08/16] arm64: zynqmp: Fix spi flash partition definition for zc1751 dc2   Michal Simek
• [U-Boot] [PATCH 09/16] arm64: zynqmp: Use atmel prefix instead of at   Michal Simek
• [U-Boot] [PATCH 10/16] arm64: zynqmp: Add eeprom reference to eeprom nodes   Michal Simek
• [U-Boot] [PATCH 11/16] arm64: zynqmp: Enable ttcs for zc1751 dc5   Michal Simek
• [U-Boot] [PATCH 12/16] arm64: zynqmp: Update sd properties for dc5   Michal Simek
• [U-Boot] [PATCH 13/16] arm64: zynqmp: Remove u-boot commands from dts files   Michal Simek
• [U-Boot] [PATCH 14/16] arm64: zynqmp: Remove number from clock-generator node name   Michal Simek
• [U-Boot] [PATCH 15/16] arm64: zynqmp: Add silabs prefix to u69 for zcu102   Michal Simek
• [U-Boot] [PATCH 16/16] arm64: zynqmp: Remove double spaces from dts file   Michal Simek
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v2 0/2] dm: i2c: implement gpio-based I2C deblock   Alexander Kochetkov
• [U-Boot] [PATCH v2 1/2] dm: i2c: dts: Add gpios and pinctrl device tree properties   Alexander Kochetkov
• [U-Boot] [PATCH v2 2/2] dm: i2c: implement gpio-based I2C deblock   Alexander Kochetkov
• [U-Boot] [PATCH 1/3] board: ti: am43xx: Define embedded_dtb_select for runtime DTB selection in U-boot   Lokesh Vutla
• [U-Boot] [PATCH 2/3] ARM: dts: Add new "generic" am4372 device tree file.   Lokesh Vutla
• [U-Boot] [PATCH 3/3] configs: am43xx_evm_qspiboot_defconfig: Move to DM   Lokesh Vutla
• [U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8   Bin Meng
• [U-Boot] [PATCH 1/2] efi_loader: complete efi_pxe_mode struct definition   Heinrich Schuchardt
• [U-Boot] [PATCH 26/36] rockchip: rk1108: remove rockchip timer for sys timer   Dr. Philipp Tomsich
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Heinrich Schuchardt
• [U-Boot] [PATCH] cmd: nvedit: Add filtering during env import   Alex Kiernan
• [U-Boot] [PATCH 26/36] rockchip: rk1108: remove rockchip timer for sys timer   Alexander Kochetkov
• [U-Boot] [PATCH 26/36] rockchip: rk1108: remove rockchip timer for sys timer   Alexander Kochetkov
• [U-Boot] [PATCH] net: mvneta: support setting hardware address   Matt Pelland
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Jagan Teki
• [U-Boot] [PATCH] mmc: mv_sdhci: zero out sdhci_host structure   Matt Pelland
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Jagan Teki
• [U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK   Jagan Teki
• [U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8   Vasyl Vavrychuk
• [U-Boot] [PATCH] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Pierre-Jean TEXIER
• [U-Boot] [PATCH v2 3/3] imx: hab: Provide hab_auth_img_or_fail command   Breno Matheus Lima
• [U-Boot] [PATCH v2 3/3] imx: hab: Provide hab_auth_img_or_fail command   Breno Matheus Lima
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   André Przywara
• [U-Boot] [PATCH v2] Kconfig: cmd: Make networking command dependent on NET   Joe Hershberger
• [U-Boot] [PATCH v3 1/2] imximage: Encase majority of header in __ASSEMBLY__ declaration   Breno Matheus Lima
• [U-Boot] [PATCH v3 2/2] imx: hab: Provide hab_auth_img_or_fail command   Breno Matheus Lima
• [U-Boot] [PATCH] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Fabio Estevam
• [U-Boot] [PATCH 33/36] rockchip: dts: rk3399-firefly: enable uart2 in spl   Kever Yang
• [U-Boot] [PATCH 26/36] rockchip: rk1108: remove rockchip timer for sys timer   Kever Yang
• [U-Boot] [PATCH 22/36] rockchip: dts: rk3288: update spl-boot-order   Kever Yang
• [U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8   Bin Meng
• [U-Boot] [PATCH v2] power: pwm regulator: support live tree   Kever Yang
• [U-Boot] [PATCH v2] Kconfig: cmd: Make networking command dependent on NET   Michal Simek
• [U-Boot] [PATCH 0/4] Meson clock driver   Neil Armstrong
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Jagan Teki
• [U-Boot] [PATCH u-boot 0/2] Cleanup for Amlogic GX SoCs   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/2] ARM: meson: rename GXBB to GX   Neil Armstrong
• [U-Boot] [PATCH u-boot 2/2] ARM: meson: Add cpu info display for GX SoCs   Neil Armstrong
• [U-Boot] [PATCHv3 0/2] Changes to Z-turn dtd   Michal Simek
• [U-Boot] [PATCH 0/4] Meson clock driver   Beniamino Galvani
• [U-Boot] [PATCH] watchdog: Fix Kconfig alignment for WDT_SANDBOX   Michal Simek
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Maxime Ripard
• [U-Boot] [PATCH] vxworks: fixed cpu enable using PSCI on armv8   Vasyl Vavrychuk
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Maxime Ripard
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Icenowy Zheng
• [U-Boot] [RFC] Analyzing data abort in EFI payload   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] drivers: Add devinfo uclass   Mario Six
• [U-Boot] [PATCH 2/2] devinfo: Add gazerbeam info driver   Mario Six
• [U-Boot] [PATCH 1/3] core: Add function to get device for ofnode   Mario Six
• [U-Boot] [PATCH 2/3] core: Add functions to set properties in live-tree   Mario Six
• [U-Boot] [PATCH 3/3] core: Add dev_{disable,enable}_by_path   Mario Six
• [U-Boot] [PATCH 1/3] drivers: Add FPGA register map uclass   Mario Six
• [U-Boot] [PATCH 2/3] fpgamap/misc: Add ihs_fpga and gdsys_soc drivers   Mario Six
• [U-Boot] [PATCH 3/3] cmd: Add fpgamap command   Mario Six
• [U-Boot] [PATCH 1/3] i2c: ihs_i2c: Use new fpgamap interface   Mario Six
• [U-Boot] [PATCH 2/3] i2c: fsl: Use dev_read_addr   Mario Six
• [U-Boot] [PATCH 3/3] i2c: fsl: Add option to get clock from DT   Mario Six
• [U-Boot] [PATCH 1/2] ihs_mdio: Encapsulate register access   Mario Six
• [U-Boot] [PATCH 2/2] ihs_mdio: Make DM-compatible   Mario Six
• [U-Boot] [PATCH 1/2] misc: uclass: Add enable/disable functions   Mario Six
• [U-Boot] [PATCH 2/2] misc: Add gdsys_ioep driver   Mario Six
• [U-Boot] [PATCH 1/7] treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig   Mario Six
• [U-Boot] [PATCH 2/7] treewide: Migrate CONFIG_BOARD_EARLY_INIT_R to Kconfig   Mario Six
• [U-Boot] [PATCH 3/7] treewide: Migrate CONFIG_LAST_STAGE_INIT to Kconfig   Mario Six
• [U-Boot] [PATCH 4/7] treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig   Mario Six
• [U-Boot] [PATCH 5/7] treewide: Migrate CONFIG_TSEC_ENET to Kconfig   Mario Six
• [U-Boot] [PATCH 6/7] treewide: Migrate CONFIG_FSL_ESDHC to Kconfig   Mario Six
• [U-Boot] [PATCH 7/7] treewide: Convert CONFIG_HOSTNAME to a string option   Mario Six
• [U-Boot] [PATCH 1/8] core: Add uclass_{first,next}_device_compat   Mario Six
• [U-Boot] [PATCH 2/8] test: Add tests for uclass_{first, next}_device_compat   Mario Six
• [U-Boot] [PATCH 3/8] ram: Add driver for MPC83xx   Mario Six
• [U-Boot] [PATCH 4/8] clk: Add MPC83xx clock driver   Mario Six
• [U-Boot] [PATCH 5/8] timer: Add MPC83xx timer driver   Mario Six
• [U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function   Mario Six
• [U-Boot] [PATCH 7/8] cpu: Add MPC83xx CPU driver   Mario Six
• [U-Boot] [PATCH 8/8] misc: Add MPC83xx serdes driver   Mario Six
• [U-Boot] [PATCH] mtd: cfi_flash: Make live-tree compatible   Mario Six
• [U-Boot] [PATCH 1/4] net: Always align tx packets   Mario Six
• [U-Boot] [PATCH 2/4] net: Initialize as many ethernet devices as possible   Mario Six
• [U-Boot] [PATCH 3/4] tsec: Fix reading phy registers from DT   Mario Six
• [U-Boot] [PATCH 4/4] phylib: Don't re-define CONFIG_PHY_MARVELL   Mario Six
• [U-Boot] [PATCH] gpio: uclass: Fix debug string   Mario Six
• [U-Boot] [PATCH] cmd: ximg: Respect cache line size for flushing   Mario Six
• [U-Boot] [PATCH] cmd: Add command for calculating binary operations   Mario Six
• [U-Boot] [PATCH] clk: Add ICS8N3QV01 driver   Mario Six
• [U-Boot] [PATCH] reset: Add generic GPIO reset driver   Mario Six
• [U-Boot] [PATCH] gdsys: drivers: Add gdsys_rxaui_ctrl driver   Mario Six
• [U-Boot] [PATCH 1/3] drivers: Add OSD uclass   Mario Six
• [U-Boot] [PATCH 2/3] video_osd: Add ihs_video_out driver   Mario Six
• [U-Boot] [PATCH 3/3] cmd: Add osd commands   Mario Six
• [U-Boot] [PATCH 1/3] pci: Don't use pci_indirect when DM is active   Mario Six
• [U-Boot] [PATCH 2/3] mpc83xx/pci: Register IMMR region   Mario Six
• [U-Boot] [PATCH 3/3] pci: Add MPC83xx PCIe driver   Mario Six
• [U-Boot] [PATCH 1/7] drivers: Add AXI uclass and ihs_axi driver   Mario Six
• [U-Boot] [PATCH 2/7] axi: Add AXI sandbox driver and simple emulator   Mario Six
• [U-Boot] [PATCH 3/7] sandbox: Add and build AXI bus and device   Mario Six
• [U-Boot] [PATCH 4/7] test: Add AXI test   Mario Six
• [U-Boot] [PATCH 5/7] cmd: Add axi command   Mario Six
• [U-Boot] [PATCH 6/7] video_display: Add power_on function   Mario Six
• [U-Boot] [PATCH 7/7] video_display: Add Xilinx LogiCore DP TX   Mario Six
• [U-Boot] [PATCH V3 1/6] net: fec_mxc: Fix DM driver issue in recv   Peng Fan
• [U-Boot] [PATCH V3 2/6] net: fec_mxc: simplify fec_get_miibus   Peng Fan
• [U-Boot] [PATCH V3 3/6] net: fec: set dev->seq to priv->dev_id   Peng Fan
• [U-Boot] [PATCH V3 4/6] net: fec: sharing MDIO for two enet controllers   Peng Fan
• [U-Boot] [PATCH V3 5/6] net: fex_mxc: add i.MX6UL/SX/SL compatible   Peng Fan
• [U-Boot] [PATCH V3 6/6] net: fec: Fix issue in DM probe timeout   Peng Fan
• [U-Boot] [PATCH 0/4] Meson clock driver   Neil Armstrong
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH 0/6] arm: Fix zynq DTS file with mainline Linux kernel   Michal Simek
• [U-Boot] [PATCH 1/6] arm: zynq: Remove 0x prefixes from cc108   Michal Simek
• [U-Boot] [PATCH 2/6] arm: zynq: Sync up licenses with mainline kernel   Michal Simek
• [U-Boot] [PATCH 3/6] arm: zynq: Use i2c-mux instead of i2cswitch for pca9548   Michal Simek
• [U-Boot] [PATCH 4/6] ARM: dts: zynq: Add generic compatible string for I2C EEPROM   Michal Simek
• [U-Boot] [PATCH 5/6] arm: zynq: Fix eeprom dt nodes   Michal Simek
• [U-Boot] [PATCH 6/6] arm: zynq: Use fixed partitions for spi flash for zc770 xm010   Michal Simek
• [U-Boot] [PATCH] clk: zynqmp: Add new compatible string for clock driver   Michal Simek
• [U-Boot] [PATCH 0/3] fpga: zynqmp: Fpga changes   Michal Simek
• [U-Boot] [PATCH 1/3] fpga: zynqmp: Add support to get the PCAP status for fpga info command   Michal Simek
• [U-Boot] [PATCH 2/3] fpga: zynqmp: Update zynqmp_load() as per latest xilfpga   Michal Simek
• [U-Boot] [PATCH 3/3] fpga: zynqmp: Fix the nonsecure bitstream loading issue   Michal Simek
• [U-Boot] [PATCH] fpga: zynq: Add delay after PCFG_PROG_B change   Michal Simek
• [U-Boot] [PATCH] nand: arasan_nfc: Fixed NAND write issue   Michal Simek
• [U-Boot] [PATCH] axi: ethernet: Added support for 64 bit addressing for axi-ethernet   Michal Simek
• [U-Boot] [PATCH] net: phy: xilinx_phy: Read phytype using property xlnx, phy-type   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Enable pxe and dhcp if commands are enabled   Michal Simek
• [U-Boot] [PATCH 0/4] arm64: zynqmp: Enable various kconfig features   Michal Simek
• [U-Boot] [PATCH 1/4] arm64: zynqmp: Enable booting to ATF   Michal Simek
• [U-Boot] [PATCH 2/4] arm64: zynqmp: Enable ethernet phys for zc1751 dc5   Michal Simek
• [U-Boot] [PATCH 3/4] arm64: zynqmp: Enable mac address randomization for zc1751 dc5   Michal Simek
• [U-Boot] [PATCH 4/4] arm64: zynqmp: Enable Fixed link support   Michal Simek
• [U-Boot] [PATCH 0/2] arm64: zynqmp: Add missing psu_init configuration files   Michal Simek
• [U-Boot] [PATCH 1/2] arm64: zynqmp: Add low level initialization for zcu102-revA   Michal Simek
• [U-Boot] [PATCH 2/2] arm64: zynqmp: Add low level initialization for zc1751   Michal Simek
• [U-Boot] [PATCH 0/6] arm64: zynqmp: Add new platforms to u-boot   Michal Simek
• [U-Boot] [PATCH 1/6] arm64: zynqmp: Add support for zcu100 aka 96ultra board   Michal Simek
• [U-Boot] [PATCH 2/6] arm64: zynqmp: Add support for zc1751 dc3   Michal Simek
• [U-Boot] [PATCH 3/6] arm64: zynqmp: Add support for zc12xx boards   Michal Simek
• [U-Boot] [PATCH 4/6] arm64: zynqmp: Add support for zcu104 customer board   Michal Simek
• [U-Boot] [PATCH 5/6] arm64: zynqmp: Add support for Xilinx zcu106-revA   Michal Simek
• [U-Boot] [PATCH 6/6] arm64: zynqmp: Add support for Xilinx zcu111-revA   Michal Simek
• [U-Boot] [PATCH] arm: stm32mp1: add PSCI support   Mark Rutland
• [U-Boot] [PATCH] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Pierre-Jean Texier
• [U-Boot] [PATCH v2] Kconfig: cmd: Make networking command dependent on NET   Joe Hershberger
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Jagan Teki
• [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig   Joe Hershberger
• [U-Boot] [PATCH v2 1/2] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Pierre-Jean TEXIER
• [U-Boot] [PATCH v2 2/2] warp7: include/configs: use generic fs commands in CONFIG_EXTRA_ENV_SETTINGS   Pierre-Jean TEXIER
• [U-Boot] [PATCH v2 1/2] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] warp7: include/configs: use generic fs commands in CONFIG_EXTRA_ENV_SETTINGS   Fabio Estevam
• [U-Boot] [PATCH 0/9] net: Clean up the menus and dependencies among commands and options   Joe Hershberger
• [U-Boot] [PATCH 1/9] net: Make CMD_NET a menuconfig   Joe Hershberger
• [U-Boot] [PATCH 2/9] net: Move net command options to the cmd menu   Joe Hershberger
• [U-Boot] [PATCH 3/9] net: Move the DHCP command below the BOOTP command   Joe Hershberger
• [U-Boot] [PATCH 4/9] net: Improve menu options and help for BOOTP options   Joe Hershberger
• [U-Boot] [PATCH 5/9] net: Add the BOOTP_DNS2 option to Kconfig   Joe Hershberger
• [U-Boot] [PATCH 6/9] net: Improve BOOTP PXE config option   Joe Hershberger
• [U-Boot] [PATCH 7/9] net: Make the BOOTP options default   Joe Hershberger
• [U-Boot] [PATCH 8/9] net: Make core net code depend on NET instead of CMD_NET   Joe Hershberger
• [U-Boot] [PATCH 9/9] Revert "Kconfig: cmd: Make networking command dependent on NET"   Joe Hershberger
• [U-Boot] rockchip: rk3399: set fdtfile   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] video: rk3288_mipi: Combine NULL check into IS_ERR_OR_NULL()   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] video: rk3399_mipi: Combine NULL check into IS_ERR_OR_NULL()   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] video: rk3288_mipi: Combine NULL check into IS_ERR_OR_NULL()   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] video: rk3399_mipi: Combine NULL check into IS_ERR_OR_NULL()   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] video: rk3288_mipi: Combine NULL check into IS_ERR_OR_NULL()   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] video: rk3399_mipi: Combine NULL check into IS_ERR_OR_NULL()   Philipp Tomsich
• [U-Boot] [U-Boot, 1/3] rockchip: defconfig: puma-rk3399: enable DMA for SDHCI controller   Philipp Tomsich
• [U-Boot] [U-Boot,2/3] rockchip: mmc: update MAINTAINERS   Philipp Tomsich
• [U-Boot] [U-Boot,3/3] rockchip: sdhci: support 8bit bus-width   Philipp Tomsich
• [U-Boot] FEC and EFI Simple Network   Fabio Estevam
• [U-Boot] [PATCH] timer: Add High Precision Event Timers (HPET) support   Ivan Gorinov
• [U-Boot] [PATCH] riscv: ae250: Support DT provided by the board at runtime   Andes
• [U-Boot] Marvell Armada-38x DDR training code   Chris Packham
• [U-Boot] [PATCH 1/9] net: Make CMD_NET a menuconfig   Chris Packham
• [U-Boot] [PATCH 2/9] net: Move net command options to the cmd menu   Chris Packham
• [U-Boot] [PATCH 3/9] net: Move the DHCP command below the BOOTP command   Chris Packham
• [U-Boot] [PATCH 4/9] net: Improve menu options and help for BOOTP options   Chris Packham
• [U-Boot] [PATCH 5/9] net: Add the BOOTP_DNS2 option to Kconfig   Chris Packham
• [U-Boot] [PATCH 4/9] net: Improve menu options and help for BOOTP options   Chris Packham
• [U-Boot] [PATCH V3 6/6] net: fec: Fix issue in DM probe timeout   Joe Hershberger
• [U-Boot] [PATCH] net: phy: xilinx_phy: Read phytype using property xlnx, phy-type   Joe Hershberger
• [U-Boot] [PATCH 2/3] fpga: zynqmp: Update zynqmp_load() as per latest xilfpga   Joe Hershberger
• [U-Boot] [PATCH] axi: ethernet: Added support for 64 bit addressing for axi-ethernet   Joe Hershberger
• [U-Boot] [PATCH 1/4] net: Always align tx packets   Joe Hershberger
• [U-Boot] [PATCH 2/4] net: Initialize as many ethernet devices as possible   Joe Hershberger
• [U-Boot] [PATCH 3/4] tsec: Fix reading phy registers from DT   Joe Hershberger
• [U-Boot] [PATCH 4/4] phylib: Don't re-define CONFIG_PHY_MARVELL   Joe Hershberger
• [U-Boot] FEC and EFI Simple Network   Joe Hershberger
• [U-Boot] [PATCH v1] phy: add support for STM32 usb phy controller   Patrice Chotard
• [U-Boot] u-boot environment tool   Ran Shalit
• [U-Boot] [PATCH v3 1/5] i.MX6: Add proper CONFIG_SOC_ names for MX6 architectures   Jagan Teki
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Miquel Raynal
• [U-Boot] [PATCH v2 00/19] Introduce SPI TPM v2.0 support   Miquel Raynal
• [U-Boot] [PATCH v2 01/19] tpm: add Revision ID field in the chip structure   Miquel Raynal
• [U-Boot] [PATCH v2 02/19] tpm: rename tpm_tis_infineon in tpm_tis_infineon_i2c   Miquel Raynal
• [U-Boot] [PATCH v2 03/19] tpm: add support for TPMv2 SPI modules   Miquel Raynal
• [U-Boot] [PATCH v2 04/19] tpm: fix indentation in command list before adding more   Miquel Raynal
• [U-Boot] [PATCH v2 05/19] tpm: prepare support for TPMv2 commands   Miquel Raynal
• [U-Boot] [PATCH v2 06/19] tpm: add macros for TPMv2 commands   Miquel Raynal
• [U-Boot] [PATCH v2 07/19] tpm: add possible traces to analyze buffers returned by the TPM   Miquel Raynal
• [U-Boot] [PATCH v2 08/19] tpm: handle different buffer sizes   Miquel Raynal
• [U-Boot] [PATCH v2 09/19] tpm: add TPM2_Startup command support   Miquel Raynal
• [U-Boot] [PATCH v2 10/19] tpm: add TPM2_SelfTest command support   Miquel Raynal
• [U-Boot] [PATCH v2 11/19] tpm: add TPM2_Clear command support   Miquel Raynal
• [U-Boot] [PATCH v2 12/19] tpm: rename the _extend() function to be _pcr_event()   Miquel Raynal
• [U-Boot] [PATCH v2 13/19] tpm: add TPM2_PCR_Extend command support   Miquel Raynal
• [U-Boot] [PATCH v2 14/19] tpm: add TPM2_PCR_Read command support   Miquel Raynal
• [U-Boot] [PATCH v2 15/19] tpm: add TPM2_GetCapability command support   Miquel Raynal
• [U-Boot] [PATCH v2 16/19] tpm: add dictionary attack mitigation commands support   Miquel Raynal
• [U-Boot] [PATCH v2 17/19] tpm: add TPM2_HierarchyChangeAuth command support   Miquel Raynal
• [U-Boot] [PATCH v2 18/19] tpm: add PCR authentication commands support   Miquel Raynal
• [U-Boot] [PATCH v2 19/19] test/py: add TPMv2.0 test suite   Miquel Raynal
• [U-Boot] [PULL] Please pull from u-boot-rockchip   Dr. Philipp Tomsich
• [U-Boot] [PATCH] kconfig: add CONFIG_CC_COVERAGE   Christian Gmeiner
• [U-Boot] u-boot environment tool   Chris Packham
• [U-Boot] u-boot environment tool   Ran Shalit
• [U-Boot] [PATCH 3/4] clk: add Amlogic meson clock driver   Neil Armstrong
• [U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux   Jagan Teki
• [U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux   Maxime Ripard
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Maxime Ripard
• [U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux   Andre Przywara
• [U-Boot] [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Jagan Teki
• [U-Boot] [PATCH v4 00/19] sunxi: sync H3, H5, A64 DTs from mainline Linux   Maxime Ripard
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Maxime Ripard
• [U-Boot] [PATCH v2 12/19] tpm: rename the _extend() function to be _pcr_event()   Reinhard Pfau
• [U-Boot] [PATCH v2 12/19] tpm: rename the _extend() function to be _pcr_event()   Miquel Raynal
• [U-Boot] [PATCH v1 13/19] arm64: mvebu_armada_37xx: Use Armada 37xx pinctrl driver by default   Stefan Roese
• [U-Boot] [PATCH] timer: Add High Precision Event Timers (HPET) support   Andy Shevchenko
• [U-Boot] MPC8548 U boot   Yiğit YAŞAR
• [U-Boot] [PATCH v2 5/6] sunxi: add code for recalculating the DRAM size in U-Boot   Andre Przywara
• [U-Boot] [PATCH u-boot] reset: Add Amlogic Meson Reset Controller   Neil Armstrong
• [U-Boot] [PATCH] serial: meson: Update compatible with new Linux bindings   Neil Armstrong
• [U-Boot] [PATCH 1/1] sunxi: mmc: Fix phase delays   Maxime Ripard
• [U-Boot] [PATCH] sunxi: improve throughput in the sunxi_mmc driver   Mylène Josserand
• [U-Boot] [PATCH u-boot 0/3] Add USB Support for Amlogic Meson GXL SoCs   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Neil Armstrong
• [U-Boot] [PATCH u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs   Neil Armstrong
• [U-Boot] [PATCH u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Marek Vasut
• [U-Boot] [PATCH u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs   Marek Vasut
• [U-Boot] [PATCH u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers   Marek Vasut
• [U-Boot] [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Neil Armstrong
• [U-Boot] [PATCH u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs   Neil Armstrong
• [U-Boot] [PATCH u-boot 3/3] phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Marek Vasut
• [U-Boot] [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration   Marek Vasut
• [U-Boot] [PATCH] x86: Update the io.h file to use {out|in}_{be|le}X macros   Lukasz Majewski
• [U-Boot] [PATCH v1 0/5] Build AM335x when CONFIG_NET isn't defined   Alex Kiernan
• [U-Boot] [PATCH v1 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v1 2/5] ti: am335x: Fix bootargs when building without NET   Alex Kiernan
• [U-Boot] [PATCH v1 3/5] usb: gadget: USB_ETHER requires network support   Alex Kiernan
• [U-Boot] [PATCH v1 4/5] ti: am335x: Fix build when networking is disabled   Alex Kiernan
• [U-Boot] [PATCH v1 5/5] net: Avoid build fail on am335x when NET is disabled   Alex Kiernan
• [U-Boot] [PATCH 1/2] drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig   Stefano Babic
• [U-Boot] [PATCH] imx: fix CAAM base for i.MX6UL   Stefano Babic
• [U-Boot] [PATCH v1 1/5] Migrate CONFIG_DRIVER_TI_CPSW to Kconfig   Joe Hershberger
• [U-Boot] [PATCH v1 2/5] ti: am335x: Fix bootargs when building without NET   Joe Hershberger
• [U-Boot] [PATCH v1 3/5] usb: gadget: USB_ETHER requires network support   Joe Hershberger
• [U-Boot] [PATCH v1 5/5] net: Avoid build fail on am335x when NET is disabled   Joe Hershberger
• [U-Boot] [PATCHv1] board: ge: bx50v3: enable backlight on demand   Stefano Babic
• [U-Boot] [PATCHv1] board: ge: ppd: Fix environment variable location   Stefano Babic
• [U-Boot] [PATCH 1/2] ARM: dts: imx6ul: add wdog3   Stefano Babic
• [U-Boot] [PATCH 2/2] ARM: dts: imx6ull: add wdog3   Stefano Babic
• [U-Boot] [PATCH 1/2] mx7_common: Fix SPL compilation with secure boot support enabled   Stefano Babic
• [U-Boot] [PATCH 2/2] Makefile: Build firmware-ivt image type for HAB verification also for mx7   Stefano Babic
• [U-Boot] [PATCH 1/2] imx7: Add src_base structure define macro   Stefano Babic
• [U-Boot] [PATCH 2/2] imx7: spl: Check for Serial Downloader in spl_boot_device   Stefano Babic
• [U-Boot] [PATCH 1/1] wandboard: remove superfluous include   Stefano Babic
• [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board   Stefano Babic
• [U-Boot] [PATCH v1 2/2] boot: script: The boot.scr file for K+P's boards   Stefano Babic
• [U-Boot] [PATCH 0/9] net: Clean up the menus and dependencies among commands and options   Duncan Hare
• [U-Boot] [PATCH 1/9] net: Make CMD_NET a menuconfig   Duncan Hare
• [U-Boot] [PATCH v1 5/5] net: Avoid build fail on am335x when NET is disabled   Alex Kiernan
• [U-Boot] [PATCH 9/9] Revert "Kconfig: cmd: Make networking command dependent on NET"   Duncan Hare
• [U-Boot] [PATCH 8/9] net: Make core net code depend on NET instead of CMD_NET   Duncan Hare
• [U-Boot] [PATCH 7/9] net: Make the BOOTP options default   Duncan Hare
• [U-Boot] [PATCH 6/9] net: Improve BOOTP PXE config option   Duncan Hare
• [U-Boot] [PATCH 5/9] net: Add the BOOTP_DNS2 option to Kconfig   Duncan Hare
• [U-Boot] [PATCH v1 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board   Lukasz Majewski
• [U-Boot] [PATCH 3/9] net: Move the DHCP command below the BOOTP command   Duncan Hare
• [U-Boot] [PATCH] arm: stm32mp1: add PSCI support   Patrick DELAUNAY
• [U-Boot] [PATCH 1/1] arm: armv7: enable unaligned access   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: print information about loaded UEFI images   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: new functions to print loaded image information   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] arm: print information about loaded UEFI images   Heinrich Schuchardt
• [U-Boot] [PATCH] timer: Add High Precision Event Timers (HPET) support   Ivan Gorinov
• [U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support   Ivan Gorinov
• [U-Boot] [PATCH 0/4] efi_loader: fixes for loaded image protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] efi_loader: used efi_uintn_t for LoadImage   Heinrich Schuchardt
• [U-Boot] [PATCH 2/4] efi_loader: correctly set ImageBase for loaded image   Heinrich Schuchardt
• [U-Boot] [PATCH 3/4] efi_loader: ImageSize must be multiple of SectionAlignment   Heinrich Schuchardt
• [U-Boot] [PATCH 4/4] efi_loader: correct types for EFI_LOADED_IMAGE_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH] timer: Add High Precision Event Timers (HPET) support   Simon Glass
• [U-Boot] [PATCH] serial: meson: Update compatible with new Linux bindings   Simon Glass
• [U-Boot] [PATCH 3/4] clk: add Amlogic meson clock driver   Simon Glass
• [U-Boot] [PATCH v2 01/19] tpm: add Revision ID field in the chip structure   Simon Glass
• [U-Boot] [PATCH 00/18] Introduce SPI TPM v2.0 support   Simon Glass
• [U-Boot] [PATCH v2 02/19] tpm: rename tpm_tis_infineon in tpm_tis_infineon_i2c   Simon Glass
• [U-Boot] [PATCH v2 03/19] tpm: add support for TPMv2 SPI modules   Simon Glass
• [U-Boot] [PATCH v2 04/19] tpm: fix indentation in command list before adding more   Simon Glass
• [U-Boot] [PATCH v2 05/19] tpm: prepare support for TPMv2 commands   Simon Glass
• [U-Boot] [PATCH v2 07/19] tpm: add possible traces to analyze buffers returned by the TPM   Simon Glass
• [U-Boot] [PATCH v2 08/19] tpm: handle different buffer sizes   Simon Glass
• [U-Boot] [PATCH v2 09/19] tpm: add TPM2_Startup command support   Simon Glass
• [U-Boot] [PATCH v2 10/19] tpm: add TPM2_SelfTest command support   Simon Glass
• [U-Boot] [PATCH v2 11/19] tpm: add TPM2_Clear command support   Simon Glass
• [U-Boot] [PATCH v2 18/19] tpm: add PCR authentication commands support   Simon Glass
• [U-Boot] [PATCH v2 06/19] tpm: add macros for TPMv2 commands   Simon Glass
• [U-Boot] [PATCH 2/3] video_osd: Add ihs_video_out driver   Simon Glass
• [U-Boot] [PATCH 3/3] cmd: Add osd commands   Simon Glass
• [U-Boot] [PATCH 1/3] drivers: Add OSD uclass   Simon Glass
• [U-Boot] [PATCH] gpio: uclass: Fix debug string   Simon Glass
• [U-Boot] [PATCH 1/3] pci: Don't use pci_indirect when DM is active   Simon Glass
• [U-Boot] [PATCH] cmd: Add command for calculating binary operations   Simon Glass
• [U-Boot] [PATCH 1/3] core: Add function to get device for ofnode   Simon Glass
• [U-Boot] [PATCH 2/3] core: Add functions to set properties in live-tree   Simon Glass
• [U-Boot] [PATCH 3/3] core: Add dev_{disable,enable}_by_path   Simon Glass
• [U-Boot] [PATCH] watchdog: Fix Kconfig alignment for WDT_SANDBOX   Simon Glass
• [U-Boot] [PATCH 1/3] dm: Add migration plan for CONFIG_BLK   Simon Glass
• [U-Boot] [PATCH 1/2] dm: pci: Check board information pointer in decode_regions()   Simon Glass
• [U-Boot] [PATCH 2/2] dm: pci: Avoid setting a PCI region that has 0 size   Simon Glass
• [U-Boot] [PATCH 1/1] arm: armv7: enable unaligned access   Siarhei Siamashka
• [U-Boot] [PATCH 1/1] arm: armv7: enable unaligned access   Heinrich Schuchardt
• [U-Boot] [PATCH] ARM: mx6: ddr: Add write leveling correction code   Marek Vasut
• [U-Boot] [PATCH] arm: imx: Add Winbond SPI-NOR support for Advantech DMS-BA16 board   Ken Lin
• [U-Boot] [linux-sunxi] Re: [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Chen-Yu Tsai
• [U-Boot] Uboot send pull request   uboot at andestech.com
• [U-Boot] [PATCH] armv7m: disable icache before linux booting   Patrice Chotard
• [U-Boot] [PATCH 1/2] dm: pci: Check board information pointer in decode_regions()   Bin Meng
• [U-Boot] [PATCH 2/2] dm: pci: Avoid setting a PCI region that has 0 size   Bin Meng
• [U-Boot] [PATCH] x86: mmc: Fix mapping of BAR memory   Bin Meng
• [U-Boot] [PATCH v3] x86: zImage: Pass working device tree data to the kernel   Bin Meng
• [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig   Bin Meng
• [U-Boot] [PATCH 3/4] clk: add Amlogic meson clock driver   Neil Armstrong
• [U-Boot] [PATCH] efi_stub: Fix GDT_NOTSYS check   Bin Meng
• [U-Boot] [PATCH v3] x86: zImage: Pass working device tree data to the kernel   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH] mkimage: do not fail if there is no print_header function   Guillaume GARDET
• [U-Boot] [PATCH 1/2] image: fit: Show firmware configuration property if present   Simon Glass
• [U-Boot] [PATCH 2/2] image: fit: Show information about OS type in firwmare case too   Simon Glass
• [U-Boot] [PATCH 1/2] drivers: Add devinfo uclass   Simon Glass
• [U-Boot] [PATCH 1/3] drivers: Add FPGA register map uclass   Simon Glass
• [U-Boot] [PATCH 2/2] devinfo: Add gazerbeam info driver   Simon Glass
• [U-Boot] [PATCH 1/2] misc: uclass: Add enable/disable functions   Simon Glass
• [U-Boot] [PATCH v3 01/10] syscon: dm: Add a new method to get a regmap from DTS   Simon Glass
• [U-Boot] [PATCH 3/4] clk: add Amlogic meson clock driver   Simon Glass
• [U-Boot] [PATCH 2/7] axi: Add AXI sandbox driver and simple emulator   Simon Glass
• [U-Boot] [PATCH 1/7] drivers: Add AXI uclass and ihs_axi driver   Simon Glass
• [U-Boot] [PATCH 3/7] sandbox: Add and build AXI bus and device   Simon Glass
• [U-Boot] [PATCH 7/7] video_display: Add Xilinx LogiCore DP TX   Simon Glass
• [U-Boot] [PATCH 6/7] video_display: Add power_on function   Simon Glass
• [U-Boot] [PATCH 1/8] core: Add uclass_{first, next}_device_compat   Simon Glass
• [U-Boot] [PATCH 6/8] cpu: Add cpu_print_info function   Simon Glass
• [U-Boot] [RFC] net: eth_write_hwaddr hides ENOSYS   Simon Glass
• [U-Boot] [PATCH 1/1] log: fix typo LOGL_EFI   Simon Glass
• [U-Boot] [PATCH] env: Properly check for BLK support   Simon Glass
• [U-Boot] [PATCH] mkimage: do not fail if there is no print_header function   Dr. Philipp Tomsich
• [U-Boot] [PATCH u-boot] clk: Add get/enable/disable/release for a bulk of clocks   Neil Armstrong
• [U-Boot] [PATCH u-boot] reset: Add get/assert/deassert/release for bulk of reset signals   Neil Armstrong
• [U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support   Bin Meng
• [U-Boot] [PATCH] configs: warp7: Fix CAAM on boot with tip-of-tree   Bryan O'Donoghue
• [U-Boot] [uboot-snps-arc] [PATCH v2 0/2] SF: add support for sst26wf016, sst26wf032, sst26wf064   Alexey Brodkin
• [U-Boot] [PATCH 01/13] arm64: a37xx: dts: add gpio head file including   Stefan Roese
• [U-Boot] [PATCH 1/5] arm64: a37xx: populate pcie memory region   Stefan Roese
• [U-Boot] [PATCH] kwbimage: Fix out of bounds access   Stefan Roese
• [U-Boot] [PATCH] arm64: mvebu: a8k: Add distro boot support   Stefan Roese
• [U-Boot] [PATCH] dm: pcie: designware: add correct ATU handling   Stefan Roese
• [U-Boot] [PATCH] configs: clearfog: enable random random MAC address   Stefan Roese
• [U-Boot] Please pull u-.boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH 00/18] warp7: Enable automated OPTEE/HAB boot flow   Bryan O'Donoghue
• [U-Boot] [PATCH 01/18] imximage: Specify default IVT offset in IMX image   Bryan O'Donoghue
• [U-Boot] [PATCH 02/18] warp7: hab: Add a CSF location definition   Bryan O'Donoghue
• [U-Boot] [PATCH 03/18] warp7: hab: Set environment variable indicating HAB enable   Bryan O'Donoghue
• [U-Boot] [PATCH 04/18] warp7: defconfig: Enable OPTEE for WaRP7   Bryan O'Donoghue
• [U-Boot] [PATCH 05/18] warp7: Allocate specific region of memory to OPTEE   Bryan O'Donoghue
• [U-Boot] [PATCH 06/18] warp7: Print out the OPTEE DRAM region   Bryan O'Donoghue
• [U-Boot] [PATCH 07/18] warp7: Specify CONFIG_OPTEE_LOAD_ADDR   Bryan O'Donoghue
• [U-Boot] [PATCH 08/18] warp7: defconfig: Enable CONFIG_SECURE_BOOT   Bryan O'Donoghue
• [U-Boot] [PATCH 09/18] warp7: defconfig: Enable CONFIG_BOOTM_TEE   Bryan O'Donoghue
• [U-Boot] [PATCH 10/18] warp7: Make CONFIG_SYS_FDT_ADDR a define   Bryan O'Donoghue
• [U-Boot] [PATCH 11/18] warp7: Add Kconfig WARP7_ROOT_PART   Bryan O'Donoghue
• [U-Boot] [PATCH 12/18] warp7: select uuid partition based on rootpart   Bryan O'Donoghue
• [U-Boot] [PATCH 13/18] warp7: Define the name of a signed boot-script file   Bryan O'Donoghue
• [U-Boot] [PATCH 14/18] warp7: add warp7_auth_or_fail   Bryan O'Donoghue
• [U-Boot] [PATCH 15/18] warp7: Make load command an environment variable   Bryan O'Donoghue
• [U-Boot] [PATCH 16/18] warp7: hab: Set environment variable indicating IVT offset   Bryan O'Donoghue
• [U-Boot] [PATCH 17/18] warp7_secure: defconfig: Enable CMD_SETEXPR   Bryan O'Donoghue
• [U-Boot] [PATCH 18/18] warp7: Add support for automated secure boot.scr verification   Bryan O'Donoghue
• [U-Boot] [PATCH 00/18] warp7: Enable automated OPTEE/HAB boot flow   Bryan O'Donoghue
• [U-Boot] [PATCH 3/4] clk: add Amlogic meson clock driver   Andreas Färber
• [U-Boot] [PATCH] configs: warp7: Fix CAAM on boot with tip-of-tree   Fabio Estevam
• [U-Boot] [PATCH 11/18] warp7: Add Kconfig WARP7_ROOT_PART   Fabio Estevam
• [U-Boot] [PATCH 15/18] warp7: Make load command an environment variable   Fabio Estevam
• [U-Boot] [PATCH] ARM: mx6: ddr: Add write leveling correction code   Fabio Estevam
• [U-Boot] [PATCH] configs: warp7: Fix CAAM on boot with tip-of-tree   Bryan O'Donoghue
• [U-Boot] [PATCH] ARM: mx6: ddr: Add write leveling correction code   Eric Nelson
• [U-Boot] [PATCH 15/18] warp7: Make load command an environment variable   Bryan O'Donoghue
• [U-Boot] [RFC PATCH] net: phy: Don't limit phy addresses by default   Joe Hershberger
• [U-Boot] [PATCH] reset: socfpga: add reset driver for SoCFPGA platform   Dinh Nguyen
• [U-Boot] [PATCH v2 1/3] Move CONFIG_PHY_ADDR to Kconfig   Joe Hershberger
• [U-Boot] [PATCH 26/36] rockchip: rk1108: remove rockchip timer for sys timer   Alexander Kochetkov
• [U-Boot] [PATCH] timer: Add High Precision Event Timers (HPET) support   Andy Shevchenko
• [U-Boot] [PATCH] reset: socfpga: add reset driver for SoCFPGA platform   Marek Vasut
• [U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support   Andy Shevchenko
• [U-Boot] [PATCH v2 1/2] ARC: HSDK: add platform-specific commands   Alexey Brodkin
• [U-Boot] [PATCH] timer: Add High Precision Event Timers (HPET) support   Ivan Gorinov
• [U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support   Ivan Gorinov
• [U-Boot] [PATCH v3] timer: Add High Precision Event Timers (HPET) support   Ivan Gorinov
• [U-Boot] [PATCH v3] timer: Add High Precision Event Timers (HPET) support   Ivan Gorinov
• [U-Boot] [PATCH u-boot] clk: Add get/enable/disable/release for a bulk of clocks   Simon Glass
• [U-Boot] [PATCH 3/4] clk: add Amlogic meson clock driver   Simon Glass
• [U-Boot] [PATCH u-boot] reset: Add get/assert/deassert/release for bulk of reset signals   Simon Glass
• [U-Boot] [PATCH v3 01/20] spl: fix binman_sym output check   Simon Glass
• [U-Boot] [PATCH v2] timer: add High Precision Event Timers (HPET) support   Andy Shevchenko
• [U-Boot] [PATCH v3] timer: Add High Precision Event Timers (HPET) support   Andy Shevchenko
• [U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K   Mark Kettenis
• [U-Boot] [PATCH v2 0/2] WaRP7 unify secure and non-secure defconfigs   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/2] warp7: defconfig: Fix CAAM on boot with tip-of-tree   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/2] warp7: secure_defconfig: Remove secure_defconfig   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/2] warp7: defconfig: Fix CAAM on boot with tip-of-tree   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] warp7: secure_defconfig: Remove secure_defconfig   Fabio Estevam
• [U-Boot] [PATCH v3 0/2] WaRP7 unify secure and non-secure defconfigs   Bryan O'Donoghue
• [U-Boot] [PATCH v3 1/2] warp7: defconfig: Fix CAAM on boot with tip-of-tree   Bryan O'Donoghue
• [U-Boot] [PATCH v3 2/2] warp7: secure_defconfig: Remove secure_defconfig   Bryan O'Donoghue
• [U-Boot] [PATCH 1/6] arm64: zynqmp: Add support for zcu100 aka 96ultra board   Alexander Graf
• [U-Boot] [PATCH] core: do not fail in device_probe() when clk set default fail   Simon Glass
• [U-Boot] [PATCH v2 1/2] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/2] warp7: configs: enable CONFIG_CMD_FS_GENERIC   TEXIER Pierre-Jean
• [U-Boot] [PATCH v3 1/2] warp7: include/configs: use generic fs commands in CONFIG_EXTRA_ENV_SETTINGS   Pierre-Jean TEXIER
• [U-Boot] [PATCH v3 2/2] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Pierre-Jean TEXIER
• [U-Boot] [PATCH v3 2/2] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Fabio Estevam
• [U-Boot] [PATCH v3 1/2] warp7: include/configs: use generic fs commands in CONFIG_EXTRA_ENV_SETTINGS   Fabio Estevam
• [U-Boot] [PATCH v3 2/2] warp7: configs: enable CONFIG_CMD_FS_GENERIC   Bryan O'Donoghue
• [U-Boot] [PATCH v3 1/2] warp7: include/configs: use generic fs commands in CONFIG_EXTRA_ENV_SETTINGS   Bryan O'Donoghue