[U-Boot] [PATCH] omap3: spi: Correct ti, pindir-d0-out-d1-in parsing

[Sjoerd Simons]

The ti,pindir-d0-out-d1-in property is not expected to have a value
according to the device-tree binding, so treat it as a boolean not a
uint property.

Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
---

 drivers/spi/omap3_spi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 053a67bbe0..1ac691a68e 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -630,8 +630,10 @@ static int omap3_spi_probe(struct udevice *dev)
 		(struct omap2_mcspi_platform_config*)dev_get_driver_data(dev);
 
 	priv->regs = (struct mcspi *)(devfdt_get_addr(dev) + data->regs_offset);
-	priv->pin_dir = fdtdec_get_uint(blob, node, "ti,pindir-d0-out-d1-in",
-					    MCSPI_PINDIR_D0_IN_D1_OUT);
+	if (fdtdec_get_bool(blob, node, "ti,pindir-d0-out-d1-in"))
+		priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
+	else
+		priv->pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT;
 	priv->wordlen = SPI_DEFAULT_WORDLEN;
 	return 0;
 }
-- 
2.16.2