[U-Boot] [PATCH] mmc: sdhci: consider SDHCI_QUIRK_NO_HISPD_BIT in host_caps

Hannes Schmelzer Hannes.Schmelzer at br-automation.com
Fri Mar 2 07:16:05 UTC 2018


> 
> On 03/01/2018 11:36 PM, Hannes Schmelzer wrote:
> > Some IP-core implementations of the SDHCI have different troubles on 
the
> > silicon where they are placed.
> > 
> > On ZYNQ platform for example Xilinx doesn't accept the hold timing of 
an
> > eMMC chip which operates in High-Speed mode. Due to this fact the
> > "SDHCI_QUIRK_NO_HISPD_BIT" quirk was born.
> > 
> > This commit reflects this fact within the host-controller 
capabilities,
> > so that the layer above (mmc-driver) can setup the card correctly.
> > 
> > Otherwise the MMC card will be switched into high-speed mode and 
causes
> > possible timing violation on the host-controller side.
> > 
> > Signed-off-by: Hannes Schmelzer <oe5hpm at oevsv.at>
> 
> SDHCI_QUIRK_NO_HISPD_BIT had added because of Samsung SoC.
> (I had added this quirk, so i know exactly what purpose.)

Also on other platforms this bit is used, have look to the zynq_sdhci.c
https://github.com/u-boot/u-boot/blob/master/drivers/mmc/zynq_sdhci.c

56 #ifdef CONFIG_ZYNQ_HISPD_BROKEN 
57      host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; 
58 #endif 

> Samsung SoC didn't use the SDHCI_CTRL_HISPD bit at HOST_CNOTROL 
register. 
> Instead, its bit is used to other purpose.

Please explain me more about this other purpose,
maybe i'm missunterstand here something.

Maybe i've to introduce some new quirk, which tells the ip-core and the 
other layers
above not using HIGH_SPEED. But i think still this is the right one ... 
please have a
look to:

https://github.com/u-boot/u-boot/blob/master/drivers/mmc/mmc.c

static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps)
{
        ....
}

Here is the matching between host and card capabilities done:
1850    /* Restrict card's capabilities by what the host can do */ 
1851    card_caps &= mmc->host_caps; 

Today only the host side behaves correctly if "CONFIG_ZYNQ_HISPD_BROKEN" 
is set.
But the card still operates in HS-Mode and thats wrong.

> Best Regards,
> Jaehoon Chung
cheers,
Hannes




More information about the U-Boot mailing list