[U-Boot] [PATCH 00/13] *** SUBJECT HERE ***

[make at marvell.com]

From: Ken Ma <make at marvell.com>

The below patches fix new pinctrl driver issues and remove old obsolete pinctrl implementation for Armada 37xx.

Ken Ma (13):
  arm64: a37xx: dts: add gpio head file including
  arm64: a37xx: defconfig: Enable PINCTRL and GPIO support for
    ESPRESSOBin board
  arm64: a37xx: dts: Add pinctrl configuration for ESPRESSOBin board
  arm64: a37xx: dts: Add additional pinctrl definition
  arm64: a37xx: pinctrl: Fix number of pin in south bridge
  arm64: a37xx: dts: Fix the number of GPIO on south bridge
  arm64: a37xx: pinctrl: Fix the pin 23 on south bridge
  arm64: a37xx: pinctrl: Fix gpio pin offset in register
  arm64: a37xx: pinctrl: Correct mpp definitions
  arm64: a37xx: dts: Correct mpp definitions
  doc: a37xx: Introduce pinctrl device tree binding
  Revert "arm64: a37xx: dts: Add pin control nodes to DT"
  arm64: a37xx: remove old pinctrl implementation

 arch/arm/dts/armada-3720-db.dts                    |   6 +-
 arch/arm/dts/armada-3720-espressobin.dts           |   8 +
 arch/arm/dts/armada-37xx.dtsi                      |  36 ++--
 board/Marvell/mvebu_armada-37xx/board.c            |  23 ---
 configs/mvebu_espressobin-88f3720_defconfig        |   4 +
 .../pinctrl/marvell,armada-37xx-pinctrl.txt        | 186 +++++++++++++++++++++
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c        |  52 +++---
 7 files changed, 256 insertions(+), 59 deletions(-)
 create mode 100644 doc/device-tree-bindings/pinctrl/marvell,armada-37xx-pinctrl.txt

-- 
1.9.1