[U-Boot] [PATCH 1/2] usb: xhci-dwc3: Power on USB PHY before using

[Vignesh R]

It is wrong that expect phy init to also power on the PHY. Therefore,
explicitly, call generic_phy_power_on() after generic_phy_power_init() in
order to power on PHY before using it.

Signed-off-by: Vignesh R <vigneshr at ti.com>
---
 drivers/usb/host/xhci-dwc3.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index 258d1cd00a08..cf1986bebd07 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -137,6 +137,12 @@ static int xhci_dwc3_probe(struct udevice *dev)
 			pr_err("Can't init USB PHY for %s\n", dev->name);
 			return ret;
 		}
+
+		ret = generic_phy_power_on(&plat->usb_phy);
+		if (ret) {
+			pr_err("Can't power on USB PHY for %s\n", dev->name);
+			return ret;
+		}
 	}
 
 	dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET);
@@ -159,6 +165,12 @@ static int xhci_dwc3_remove(struct udevice *dev)
 	int ret;
 
 	if (generic_phy_valid(&plat->usb_phy)) {
+		ret = generic_phy_power_off(&plat->usb_phy);
+		if (ret) {
+			pr_err("Can't poweroff USB PHY for %s\n", dev->name);
+			return ret;
+		}
+
 		ret = generic_phy_exit(&plat->usb_phy);
 		if (ret) {
 			pr_err("Can't deinit USB PHY for %s\n", dev->name);
-- 
2.16.2