[U-Boot] [PATCH] configs: imx6qdl: Remove imx6qdl_icore_nand_defconfig

[Jagan Teki]

imx6qdl_icore_nand_defconfig is no longer used, since
it was the recreated for quad and dl separately.
"imx6q: engicam: Use SPL_LOAD_FIT for MMC boards"
(sha1: 3d409153502f25a1ea3b8b4e9940148b7871273d)

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 configs/imx6qdl_icore_nand_defconfig | 49 ------------------------------------
 1 file changed, 49 deletions(-)
 delete mode 100644 configs/imx6qdl_icore_nand_defconfig

diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig
deleted file mode 100644
index 5e142272d6..0000000000
--- a/configs/imx6qdl_icore_nand_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6Q_ENGICAM=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
-CONFIG_BOOTDELAY=3
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_SPL=y
-CONFIG_SPL_DMA_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="icorem6qdl> "
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_LIST="imx6q-icore imx6dl-icore"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_SMSC=y
-CONFIG_FEC_MXC=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_MXC_UART=y
-CONFIG_IMX_THERMAL=y
-CONFIG_VIDEO=y
-CONFIG_VIDEO_IPUV3=y
-- 
2.14.3