[U-Boot] [PATCH 03/13] arm64: a37xx: dts: Add pinctrl configuration for ESPRESSOBin board

[make at marvell.com]

From: Ken Ma <make at marvell.com>

Reviewed-on: http://vgitil04.il.marvell.com:8080/40913
Reviewed-by: Wilson Ding <dingwei at marvell.com>
Tested-by: Wilson Ding <dingwei at marvell.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Stefan Roese <sr at denx.de>
Signed-off-by: Ken Ma <make at marvell.com>
---
 arch/arm/dts/armada-3720-espressobin.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index aa6587a..5d8d27e 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -89,6 +89,8 @@
 
 &eth0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
 	phy-mode = "rgmii";
 	phy_addr = <0x1>;
 	fixed-link {
@@ -98,6 +100,8 @@
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
@@ -108,6 +112,8 @@
 
 &spi0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
 
 	spi-flash at 0 {
 		#address-cells = <1>;
@@ -121,6 +127,8 @@
 
 /* Exported on the micro USB connector CON32 through an FTDI */
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
 };
 
-- 
1.9.1