[U-Boot] [PATCH v2 07/10] video: add support of panel rm68200
yannick fertre
yannick.fertre at st.com
Fri Mar 2 15:44:08 UTC 2018
Support for Raydium rm68200 720p dsi 2dl video mode panel.
Signed-off-by: yannick fertre <yannick.fertre at st.com>
---
drivers/video/Kconfig | 8 +
drivers/video/Makefile | 1 +
drivers/video/raydium-rm68200.c | 329 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 338 insertions(+)
create mode 100644 drivers/video/raydium-rm68200.c
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0f641d7..2561c59 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -328,6 +328,14 @@ config VIDEO_LCD_ORISETECH_OTM8009A
---help---
Support for Orise Tech otm8009a 480p dsi 2dl video mode panel.
+config VIDEO_LCD_RAYDIUM_RM68200
+ bool "RM68200 DSI LCD panel support"
+ depends on DM_VIDEO
+ select VIDEO_MIPI_DSI
+ default n
+ ---help---
+ Support for Raydium rm68200 720x1280 dsi 2dl video mode panel.
+
config VIDEO_LCD_SSD2828
bool "SSD2828 bridge chip"
default n
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 50be569..1a6c8d3 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
+obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
diff --git a/drivers/video/raydium-rm68200.c b/drivers/video/raydium-rm68200.c
new file mode 100644
index 0000000..46afb58
--- /dev/null
+++ b/drivers/video/raydium-rm68200.c
@@ -0,0 +1,329 @@
+/*
+ * Copyright (C) 2018 STMicroelectronics - All Rights Reserved
+ * Author(s): Yannick Fertre <yannick.fertre at st.com> for STMicroelectronics.
+ * Philippe Cornu <philippe.cornu at st.com> for STMicroelectronics.
+ *
+ * This rm68200 panel driver is based on the panel driver from
+ * drivers/gpu/drm/panel/panel-raydium-rm68200.c (kernel linux)
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#include <asm/gpio.h>
+#include <backlight.h>
+#include <common.h>
+#include <dm.h>
+#include <panel.h>
+#include <power/regulator.h>
+#include <mipi_display.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DRV_NAME "raydium_rm68200"
+
+/*** Manufacturer Command Set ***/
+#define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */
+#define MCS_CMD1_UCS 0x00 /* User Command Set (UCS = CMD1) */
+#define MCS_CMD2_P0 0x01 /* Manufacture Command Set Page0 (CMD2 P0) */
+#define MCS_CMD2_P1 0x02 /* Manufacture Command Set Page1 (CMD2 P1) */
+#define MCS_CMD2_P2 0x03 /* Manufacture Command Set Page2 (CMD2 P2) */
+#define MCS_CMD2_P3 0x04 /* Manufacture Command Set Page3 (CMD2 P3) */
+
+/* CMD2 P0 commands (Display Options and Power) */
+#define MCS_STBCTR 0x12 /* TE1 Output Setting Zig-Zag Connection */
+#define MCS_SGOPCTR 0x16 /* Source Bias Current */
+#define MCS_SDCTR 0x1A /* Source Output Delay Time */
+#define MCS_INVCTR 0x1B /* Inversion Type */
+#define MCS_EXT_PWR_IC 0x24 /* External PWR IC Control */
+#define MCS_SETAVDD 0x27 /* PFM Control for AVDD Output */
+#define MCS_SETAVEE 0x29 /* PFM Control for AVEE Output */
+#define MCS_BT2CTR 0x2B /* DDVDL Charge Pump Control */
+#define MCS_BT3CTR 0x2F /* VGH Charge Pump Control */
+#define MCS_BT4CTR 0x34 /* VGL Charge Pump Control */
+#define MCS_VCMCTR 0x46 /* VCOM Output Level Control */
+#define MCS_SETVGN 0x52 /* VG M/S N Control */
+#define MCS_SETVGP 0x54 /* VG M/S P Control */
+#define MCS_SW_CTRL 0x5F /* Interface Control for PFM and MIPI */
+
+/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */
+#define GOA_VSTV1 0x00
+#define GOA_VSTV2 0x07
+#define GOA_VCLK1 0x0E
+#define GOA_VCLK2 0x17
+#define GOA_VCLK_OPT1 0x20
+#define GOA_BICLK1 0x2A
+#define GOA_BICLK2 0x37
+#define GOA_BICLK3 0x44
+#define GOA_BICLK4 0x4F
+#define GOA_BICLK_OPT1 0x5B
+#define GOA_BICLK_OPT2 0x60
+#define MCS_GOA_GPO1 0x6D
+#define MCS_GOA_GPO2 0x71
+#define MCS_GOA_EQ 0x74
+#define MCS_GOA_CLK_GALLON 0x7C
+#define MCS_GOA_FS_SEL0 0x7E
+#define MCS_GOA_FS_SEL1 0x87
+#define MCS_GOA_FS_SEL2 0x91
+#define MCS_GOA_FS_SEL3 0x9B
+#define MCS_GOA_BS_SEL0 0xAC
+#define MCS_GOA_BS_SEL1 0xB5
+#define MCS_GOA_BS_SEL2 0xBF
+#define MCS_GOA_BS_SEL3 0xC9
+#define MCS_GOA_BS_SEL4 0xD3
+
+/* CMD2 P3 commands (Gamma) */
+#define MCS_GAMMA_VP 0x60 /* Gamma VP1~VP16 */
+#define MCS_GAMMA_VN 0x70 /* Gamma VN1~VN16 */
+
+struct rm68200_panel_priv {
+ struct udevice *reg;
+ struct udevice *backlight;
+ struct gpio_desc reset;
+};
+
+static void rm68200_dcs_write_buf(struct udevice *dev, const void *data,
+ size_t len)
+{
+ struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+ struct mipi_dsi_device *device = plat->device;
+
+ if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
+ pr_err("mipi dsi dcs write buffer failed\n");
+}
+
+static void rm68200_dcs_write_cmd(struct udevice *dev, u8 cmd, u8 value)
+{
+ struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+ struct mipi_dsi_device *device = plat->device;
+
+ if (mipi_dsi_dcs_write(device, cmd, &value, 1) < 0)
+ pr_err("mipi dsi dcs write failed\n");
+}
+
+#define dcs_write_seq(ctx, seq...) \
+({ \
+ static const u8 d[] = { seq }; \
+ rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \
+})
+
+/*
+ * This panel is not able to auto-increment all cmd addresses so for some of
+ * them, we need to send them one by one...
+ */
+#define dcs_write_cmd_seq(ctx, cmd, seq...) \
+({ \
+ static const u8 d[] = { seq }; \
+ static int i; \
+ for (i = 0; i < ARRAY_SIZE(d) ; i++) \
+ rm68200_dcs_write_cmd(ctx, cmd + i, d[i]); \
+})
+
+static int rm68200_init_sequence(struct udevice *dev)
+{
+ /* Enter CMD2 with page 0 */
+ dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P0);
+ dcs_write_cmd_seq(dev, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00);
+ dcs_write_seq(dev, MCS_BT2CTR, 0xE5);
+ dcs_write_seq(dev, MCS_SETAVDD, 0x0A);
+ dcs_write_seq(dev, MCS_SETAVEE, 0x0A);
+ dcs_write_seq(dev, MCS_SGOPCTR, 0x52);
+ dcs_write_seq(dev, MCS_BT3CTR, 0x53);
+ dcs_write_seq(dev, MCS_BT4CTR, 0x5A);
+ dcs_write_seq(dev, MCS_INVCTR, 0x00);
+ dcs_write_seq(dev, MCS_STBCTR, 0x0A);
+ dcs_write_seq(dev, MCS_SDCTR, 0x06);
+ dcs_write_seq(dev, MCS_VCMCTR, 0x56);
+ dcs_write_seq(dev, MCS_SETVGN, 0xA0, 0x00);
+ dcs_write_seq(dev, MCS_SETVGP, 0xA0, 0x00);
+ dcs_write_seq(dev, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */
+
+ dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P2);
+ dcs_write_seq(dev, GOA_VSTV1, 0x05);
+ dcs_write_seq(dev, 0x02, 0x0B);
+ dcs_write_seq(dev, 0x03, 0x0F);
+ dcs_write_seq(dev, 0x04, 0x7D, 0x00, 0x50);
+ dcs_write_cmd_seq(dev, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00,
+ 0x50);
+ dcs_write_cmd_seq(dev, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D,
+ 0x00, 0x85, 0x08);
+ dcs_write_cmd_seq(dev, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D,
+ 0x00, 0x85, 0x08);
+ dcs_write_seq(dev, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00);
+ dcs_write_cmd_seq(dev, GOA_BICLK1, 0x07, 0x08);
+ dcs_write_seq(dev, 0x2D, 0x01);
+ dcs_write_seq(dev, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D,
+ 0x00);
+ dcs_write_cmd_seq(dev, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00);
+ dcs_write_seq(dev, 0x3D, 0x40);
+ dcs_write_seq(dev, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00);
+ dcs_write_seq(dev, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00);
+ dcs_write_seq(dev, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00);
+ dcs_write_seq(dev, 0x58, 0x00, 0x00, 0x00);
+ dcs_write_seq(dev, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dcs_write_seq(dev, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dcs_write_seq(dev, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00);
+ dcs_write_seq(dev, MCS_GOA_GPO2, 0x00, 0x20, 0x00);
+ dcs_write_seq(dev, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
+ 0x00, 0x00);
+ dcs_write_seq(dev, MCS_GOA_CLK_GALLON, 0x00, 0x00);
+ dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10,
+ 0x16, 0x12, 0x08, 0x3F);
+ dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C,
+ 0x0A, 0x0E, 0x3F, 0x3F, 0x00);
+ dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F,
+ 0x05, 0x01, 0x3F, 0x3F, 0x0F);
+ dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F,
+ 0x3F);
+ dcs_write_cmd_seq(dev, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15);
+ dcs_write_cmd_seq(dev, 0xA9, 0x07, 0x03, 0x3F);
+ dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13,
+ 0x15, 0x11, 0x0F, 0x3F);
+ dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B,
+ 0x0D, 0x09, 0x3F, 0x3F, 0x07);
+ dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F,
+ 0x02, 0x06, 0x3F, 0x3F, 0x08);
+ dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F,
+ 0x3F, 0x3F, 0x0E, 0x10, 0x14);
+ dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F);
+ dcs_write_seq(dev, 0xDC, 0x02);
+ dcs_write_seq(dev, 0xDE, 0x12);
+
+ dcs_write_seq(dev, MCS_CMD_MODE_SW, 0x0E); /* No documentation */
+ dcs_write_seq(dev, 0x01, 0x75);
+
+ dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P3);
+ dcs_write_cmd_seq(dev, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06,
+ 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
+ 0x12, 0x0C, 0x00);
+ dcs_write_cmd_seq(dev, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06,
+ 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
+ 0x12, 0x0C, 0x00);
+
+ /* Exit CMD2 */
+ dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD1_UCS);
+
+ return 0;
+}
+
+static int rm68200_panel_enable_backlight(struct udevice *dev)
+{
+ struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
+ struct mipi_dsi_device *device = plat->device;
+ struct rm68200_panel_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ device->lanes = 2;
+ device->format = MIPI_DSI_FMT_RGB888;
+ device->mode_flags = MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_attach(device);
+ if (ret < 0)
+ return ret;
+
+ pr_info("%s: initialize panel\n", __func__);
+
+ ret = rm68200_init_sequence(dev);
+ if (ret)
+ return ret;
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(device);
+ if (ret)
+ return ret;
+
+ mdelay(125);
+
+ ret = mipi_dsi_dcs_set_display_on(device);
+ if (ret)
+ return ret;
+
+ mdelay(20);
+
+ pr_info("%s: start, backlight = '%s'\n", __func__,
+ priv->backlight->name);
+
+ ret = backlight_enable(priv->backlight);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int rm68200_panel_ofdata_to_platdata(struct udevice *dev)
+{
+ struct rm68200_panel_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
+ ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev,
+ "power-supply", &priv->reg);
+ if (ret) {
+ pr_info("%s: Warning: cannot get power supply\n",
+ __func__);
+ if (ret != -ENOENT)
+ return ret;
+ }
+ }
+
+ ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
+ GPIOD_IS_OUT);
+ if (ret) {
+ pr_info("%s: Warning: cannot get reset GPIO\n", __func__);
+ if (ret != -ENOENT)
+ return ret;
+ }
+
+ /* reset panel must be done before probe */
+ dm_gpio_set_value(&priv->reset, true);
+
+ return 0;
+}
+
+static int rm68200_panel_probe(struct udevice *dev)
+{
+ struct rm68200_panel_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
+ pr_info("%s: Enable regulator '%s'\n", __func__,
+ priv->reg->name);
+ ret = regulator_set_enable(priv->reg, true);
+ if (ret)
+ return ret;
+ }
+
+ dm_gpio_set_value(&priv->reset, false);
+
+ ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+ "backlight", &priv->backlight);
+ if (ret) {
+ pr_info("%s: Cannot get backlight: ret=%d\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct panel_ops rm68200_panel_ops = {
+ .enable_backlight = rm68200_panel_enable_backlight,
+};
+
+static const struct udevice_id rm68200_panel_ids[] = {
+ { .compatible = "raydium,rm68200" },
+ { }
+};
+
+U_BOOT_DRIVER(rm68200_panel) = {
+ .name = "rm68200_panel",
+ .id = UCLASS_PANEL,
+ .of_match = rm68200_panel_ids,
+ .ops = &rm68200_panel_ops,
+ .ofdata_to_platdata = rm68200_panel_ofdata_to_platdata,
+ .probe = rm68200_panel_probe,
+ .platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat),
+ .priv_auto_alloc_size = sizeof(struct rm68200_panel_priv),
+};
--
1.9.1
More information about the U-Boot
mailing list