[U-Boot] [PATCH v2 07/10] video: add support of panel rm68200
Patrice CHOTARD
patrice.chotard at st.com
Tue Mar 13 08:59:08 UTC 2018
Hi yannick
On 03/02/2018 04:44 PM, yannick fertre wrote:
> Support for Raydium rm68200 720p dsi 2dl video mode panel.
>
> Signed-off-by: yannick fertre <yannick.fertre at st.com>
> ---
> drivers/video/Kconfig | 8 +
> drivers/video/Makefile | 1 +
> drivers/video/raydium-rm68200.c | 329 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 338 insertions(+)
> create mode 100644 drivers/video/raydium-rm68200.c
>
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 0f641d7..2561c59 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -328,6 +328,14 @@ config VIDEO_LCD_ORISETECH_OTM8009A
> ---help---
> Support for Orise Tech otm8009a 480p dsi 2dl video mode panel.
>
> +config VIDEO_LCD_RAYDIUM_RM68200
> + bool "RM68200 DSI LCD panel support"
> + depends on DM_VIDEO
> + select VIDEO_MIPI_DSI
> + default n
> + ---help---
> + Support for Raydium rm68200 720x1280 dsi 2dl video mode panel.
> +
> config VIDEO_LCD_SSD2828
> bool "SSD2828 bridge chip"
> default n
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index 50be569..1a6c8d3 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -38,6 +38,7 @@ obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
> obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
> obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
> obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
> +obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
> obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
> obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
> obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
> diff --git a/drivers/video/raydium-rm68200.c b/drivers/video/raydium-rm68200.c
> new file mode 100644
> index 0000000..46afb58
> --- /dev/null
> +++ b/drivers/video/raydium-rm68200.c
> @@ -0,0 +1,329 @@
> +/*
> + * Copyright (C) 2018 STMicroelectronics - All Rights Reserved
> + * Author(s): Yannick Fertre <yannick.fertre at st.com> for STMicroelectronics.
> + * Philippe Cornu <philippe.cornu at st.com> for STMicroelectronics.
> + *
> + * This rm68200 panel driver is based on the panel driver from
> + * drivers/gpu/drm/panel/panel-raydium-rm68200.c (kernel linux)
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +#include <asm/gpio.h>
> +#include <backlight.h>
> +#include <common.h>
> +#include <dm.h>
> +#include <panel.h>
> +#include <power/regulator.h>
> +#include <mipi_display.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define DRV_NAME "raydium_rm68200"
> +
> +/*** Manufacturer Command Set ***/
> +#define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */
> +#define MCS_CMD1_UCS 0x00 /* User Command Set (UCS = CMD1) */
> +#define MCS_CMD2_P0 0x01 /* Manufacture Command Set Page0 (CMD2 P0) */
> +#define MCS_CMD2_P1 0x02 /* Manufacture Command Set Page1 (CMD2 P1) */
> +#define MCS_CMD2_P2 0x03 /* Manufacture Command Set Page2 (CMD2 P2) */
> +#define MCS_CMD2_P3 0x04 /* Manufacture Command Set Page3 (CMD2 P3) */
> +
> +/* CMD2 P0 commands (Display Options and Power) */
> +#define MCS_STBCTR 0x12 /* TE1 Output Setting Zig-Zag Connection */
> +#define MCS_SGOPCTR 0x16 /* Source Bias Current */
> +#define MCS_SDCTR 0x1A /* Source Output Delay Time */
> +#define MCS_INVCTR 0x1B /* Inversion Type */
> +#define MCS_EXT_PWR_IC 0x24 /* External PWR IC Control */
> +#define MCS_SETAVDD 0x27 /* PFM Control for AVDD Output */
> +#define MCS_SETAVEE 0x29 /* PFM Control for AVEE Output */
> +#define MCS_BT2CTR 0x2B /* DDVDL Charge Pump Control */
> +#define MCS_BT3CTR 0x2F /* VGH Charge Pump Control */
> +#define MCS_BT4CTR 0x34 /* VGL Charge Pump Control */
> +#define MCS_VCMCTR 0x46 /* VCOM Output Level Control */
> +#define MCS_SETVGN 0x52 /* VG M/S N Control */
> +#define MCS_SETVGP 0x54 /* VG M/S P Control */
> +#define MCS_SW_CTRL 0x5F /* Interface Control for PFM and MIPI */
> +
> +/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */
> +#define GOA_VSTV1 0x00
> +#define GOA_VSTV2 0x07
> +#define GOA_VCLK1 0x0E
> +#define GOA_VCLK2 0x17
> +#define GOA_VCLK_OPT1 0x20
> +#define GOA_BICLK1 0x2A
> +#define GOA_BICLK2 0x37
> +#define GOA_BICLK3 0x44
> +#define GOA_BICLK4 0x4F
> +#define GOA_BICLK_OPT1 0x5B
> +#define GOA_BICLK_OPT2 0x60
> +#define MCS_GOA_GPO1 0x6D
> +#define MCS_GOA_GPO2 0x71
> +#define MCS_GOA_EQ 0x74
> +#define MCS_GOA_CLK_GALLON 0x7C
> +#define MCS_GOA_FS_SEL0 0x7E
> +#define MCS_GOA_FS_SEL1 0x87
> +#define MCS_GOA_FS_SEL2 0x91
> +#define MCS_GOA_FS_SEL3 0x9B
> +#define MCS_GOA_BS_SEL0 0xAC
> +#define MCS_GOA_BS_SEL1 0xB5
> +#define MCS_GOA_BS_SEL2 0xBF
> +#define MCS_GOA_BS_SEL3 0xC9
> +#define MCS_GOA_BS_SEL4 0xD3
> +
> +/* CMD2 P3 commands (Gamma) */
> +#define MCS_GAMMA_VP 0x60 /* Gamma VP1~VP16 */
> +#define MCS_GAMMA_VN 0x70 /* Gamma VN1~VN16 */
> +
> +struct rm68200_panel_priv {
> + struct udevice *reg;
> + struct udevice *backlight;
> + struct gpio_desc reset;
> +};
> +
> +static void rm68200_dcs_write_buf(struct udevice *dev, const void *data,
> + size_t len)
> +{
> + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
> + struct mipi_dsi_device *device = plat->device;
> +
> + if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
> + pr_err("mipi dsi dcs write buffer failed\n");
pr_err()
> +}
> +
> +static void rm68200_dcs_write_cmd(struct udevice *dev, u8 cmd, u8 value)
> +{
> + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
> + struct mipi_dsi_device *device = plat->device;
> +
> + if (mipi_dsi_dcs_write(device, cmd, &value, 1) < 0)
> + pr_err("mipi dsi dcs write failed\n");
ditto
> +}
> +
> +#define dcs_write_seq(ctx, seq...) \
> +({ \
> + static const u8 d[] = { seq }; \
> + rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \
> +})
> +
> +/*
> + * This panel is not able to auto-increment all cmd addresses so for some of
> + * them, we need to send them one by one...
> + */
> +#define dcs_write_cmd_seq(ctx, cmd, seq...) \
> +({ \
> + static const u8 d[] = { seq }; \
> + static int i; \
> + for (i = 0; i < ARRAY_SIZE(d) ; i++) \
> + rm68200_dcs_write_cmd(ctx, cmd + i, d[i]); \
> +})
> +
> +static int rm68200_init_sequence(struct udevice *dev)
> +{
> + /* Enter CMD2 with page 0 */
> + dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P0);
> + dcs_write_cmd_seq(dev, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00);
> + dcs_write_seq(dev, MCS_BT2CTR, 0xE5);
> + dcs_write_seq(dev, MCS_SETAVDD, 0x0A);
> + dcs_write_seq(dev, MCS_SETAVEE, 0x0A);
> + dcs_write_seq(dev, MCS_SGOPCTR, 0x52);
> + dcs_write_seq(dev, MCS_BT3CTR, 0x53);
> + dcs_write_seq(dev, MCS_BT4CTR, 0x5A);
> + dcs_write_seq(dev, MCS_INVCTR, 0x00);
> + dcs_write_seq(dev, MCS_STBCTR, 0x0A);
> + dcs_write_seq(dev, MCS_SDCTR, 0x06);
> + dcs_write_seq(dev, MCS_VCMCTR, 0x56);
> + dcs_write_seq(dev, MCS_SETVGN, 0xA0, 0x00);
> + dcs_write_seq(dev, MCS_SETVGP, 0xA0, 0x00);
> + dcs_write_seq(dev, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */
> +
> + dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P2);
> + dcs_write_seq(dev, GOA_VSTV1, 0x05);
> + dcs_write_seq(dev, 0x02, 0x0B);
> + dcs_write_seq(dev, 0x03, 0x0F);
> + dcs_write_seq(dev, 0x04, 0x7D, 0x00, 0x50);
> + dcs_write_cmd_seq(dev, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00,
> + 0x50);
> + dcs_write_cmd_seq(dev, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D,
> + 0x00, 0x85, 0x08);
> + dcs_write_cmd_seq(dev, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D,
> + 0x00, 0x85, 0x08);
> + dcs_write_seq(dev, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00);
> + dcs_write_cmd_seq(dev, GOA_BICLK1, 0x07, 0x08);
> + dcs_write_seq(dev, 0x2D, 0x01);
> + dcs_write_seq(dev, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D,
> + 0x00);
> + dcs_write_cmd_seq(dev, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00);
> + dcs_write_seq(dev, 0x3D, 0x40);
> + dcs_write_seq(dev, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00);
> + dcs_write_seq(dev, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_seq(dev, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00);
> + dcs_write_seq(dev, 0x58, 0x00, 0x00, 0x00);
> + dcs_write_seq(dev, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_seq(dev, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_seq(dev, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_seq(dev, MCS_GOA_GPO2, 0x00, 0x20, 0x00);
> + dcs_write_seq(dev, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
> + 0x00, 0x00);
> + dcs_write_seq(dev, MCS_GOA_CLK_GALLON, 0x00, 0x00);
> + dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10,
> + 0x16, 0x12, 0x08, 0x3F);
> + dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C,
> + 0x0A, 0x0E, 0x3F, 0x3F, 0x00);
> + dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F,
> + 0x05, 0x01, 0x3F, 0x3F, 0x0F);
> + dcs_write_cmd_seq(dev, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F,
> + 0x3F);
> + dcs_write_cmd_seq(dev, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15);
> + dcs_write_cmd_seq(dev, 0xA9, 0x07, 0x03, 0x3F);
> + dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13,
> + 0x15, 0x11, 0x0F, 0x3F);
> + dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B,
> + 0x0D, 0x09, 0x3F, 0x3F, 0x07);
> + dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F,
> + 0x02, 0x06, 0x3F, 0x3F, 0x08);
> + dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F,
> + 0x3F, 0x3F, 0x0E, 0x10, 0x14);
> + dcs_write_cmd_seq(dev, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F);
> + dcs_write_seq(dev, 0xDC, 0x02);
> + dcs_write_seq(dev, 0xDE, 0x12);
> +
> + dcs_write_seq(dev, MCS_CMD_MODE_SW, 0x0E); /* No documentation */
> + dcs_write_seq(dev, 0x01, 0x75);
> +
> + dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD2_P3);
> + dcs_write_cmd_seq(dev, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06,
> + 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
> + 0x12, 0x0C, 0x00);
> + dcs_write_cmd_seq(dev, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06,
> + 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
> + 0x12, 0x0C, 0x00);
> +
> + /* Exit CMD2 */
> + dcs_write_seq(dev, MCS_CMD_MODE_SW, MCS_CMD1_UCS);
> +
> + return 0;
> +}
> +
> +static int rm68200_panel_enable_backlight(struct udevice *dev)
> +{
> + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
> + struct mipi_dsi_device *device = plat->device;
> + struct rm68200_panel_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + device->lanes = 2;
> + device->format = MIPI_DSI_FMT_RGB888;
> + device->mode_flags = MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_attach(device);
> + if (ret < 0)
> + return ret;
> +
> + pr_info("%s: initialize panel\n", __func__);
debug() ?
> +
> + ret = rm68200_init_sequence(dev);
> + if (ret)
> + return ret;
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(device);
> + if (ret)
> + return ret;
> +
> + mdelay(125);
> +
> + ret = mipi_dsi_dcs_set_display_on(device);
> + if (ret)
> + return ret;
> +
> + mdelay(20);
> +
> + pr_info("%s: start, backlight = '%s'\n", __func__,
> + priv->backlight->name);
> +
debug() ?
> + ret = backlight_enable(priv->backlight);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int rm68200_panel_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct rm68200_panel_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
> + ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev,
> + "power-supply", &priv->reg);
> + if (ret) {
> + pr_info("%s: Warning: cannot get power supply\n",
> + __func__);
dev_info()
> + if (ret != -ENOENT)
> + return ret;
> + }
> + }
> +
> + ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
> + GPIOD_IS_OUT);
> + if (ret) {
> + pr_info("%s: Warning: cannot get reset GPIO\n", __func__);
ditto
> + if (ret != -ENOENT)
> + return ret;
> + }
> +
> + /* reset panel must be done before probe */
> + dm_gpio_set_value(&priv->reset, true);
> +
> + return 0;
> +}
> +
> +static int rm68200_panel_probe(struct udevice *dev)
> +{
> + struct rm68200_panel_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
> + pr_info("%s: Enable regulator '%s'\n", __func__,
> + priv->reg->name);
debug() ?
> + ret = regulator_set_enable(priv->reg, true);
> + if (ret)
> + return ret;
> + }
> +
> + dm_gpio_set_value(&priv->reset, false);
> +
> + ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
> + "backlight", &priv->backlight);
> + if (ret) {
> + pr_info("%s: Cannot get backlight: ret=%d\n", __func__, ret);
dev_err()
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct panel_ops rm68200_panel_ops = {
> + .enable_backlight = rm68200_panel_enable_backlight,
> +};
> +
> +static const struct udevice_id rm68200_panel_ids[] = {
> + { .compatible = "raydium,rm68200" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(rm68200_panel) = {
> + .name = "rm68200_panel",
> + .id = UCLASS_PANEL,
> + .of_match = rm68200_panel_ids,
> + .ops = &rm68200_panel_ops,
> + .ofdata_to_platdata = rm68200_panel_ofdata_to_platdata,
> + .probe = rm68200_panel_probe,
> + .platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat),
> + .priv_auto_alloc_size = sizeof(struct rm68200_panel_priv),
> +};
>
More information about the U-Boot
mailing list