[U-Boot] [PATCH 0/3] ARM: stratix10: initial small patchset

[Marek Vasut]

On 03/09/2018 04:39 AM, Dinh Nguyen wrote:
> Hi,
> 
> This is a very small initial patchset for the SoCFPGA Stratix10 platform.
> This patchset adds a few core address defines that are not obtainable from
> DT, pulls in from Linux the base DTS files, and the reset manager bindings.
> The DTB is able to compile with this patchset.
> 
> Instead of dropping a larger patchset with for SPL and U-Boot, I figure
> we start out small first, and allow for a couple of medium size patchset
> later for further support.
> 
> Thanks,
> Dinh
> 
> Chin Liang See (1):
>   arm: socfpga: stratix10: Add base address map for Statix10 SoC
> 
> Dinh Nguyen (2):
>   ARM64: stratix10: add reset manager includes
>   ARM: dts: stratix10: Add base dtsi and devkit dts
> 
>  arch/arm/dts/Makefile                              |   1 +
>  arch/arm/dts/socfpga_stratix10.dtsi                | 381 +++++++++++++++++++++
>  arch/arm/dts/socfpga_stratix10_socdk.dts           |  92 +++++
>  arch/arm/mach-socfpga/include/mach/base_addr_s10.h |  33 ++
>  include/dt-bindings/reset/altr,rst-mgr-s10.h       |  97 ++++++
>  5 files changed, 604 insertions(+)
>  create mode 100644 arch/arm/dts/socfpga_stratix10.dtsi
>  create mode 100644 arch/arm/dts/socfpga_stratix10_socdk.dts
>  create mode 100644 arch/arm/mach-socfpga/include/mach/base_addr_s10.h
>  create mode 100644 include/dt-bindings/reset/altr,rst-mgr-s10.h
> 
I hope this will not become a pile of dead code ...
Applied all, thanks

-- 
Best regards,
Marek Vasut