[U-Boot] imx6: USB SDP failed for u-boot-dtb.img

Vincent Prince vincent.prince.fr at gmail.com
Tue Mar 6 14:27:00 UTC 2018


Hi all,

Jagan , do you confirm your mx6_usb_sdp_spl.conf contains the 3rd line?

mx6_spl_sdp
hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000
u-boot-dtb.img:jump header2

BR,
Vincent

2018-03-06 15:18 GMT+01:00 Michael Nazzareno Trimarchi <
michael at amarulasolutions.com>:

> Hi Jagan
>
> There is a git log for that configuration file. I have the impression
> that is done in two steps
>
> Michael
>
> On Tue, Mar 6, 2018 at 3:16 PM, Stefano Babic <sbabic at denx.de> wrote:
> > On 06/03/2018 15:12, Jagan Teki wrote:
> >> On Tue, Mar 6, 2018 at 6:46 PM, Fabio Estevam <festevam at gmail.com>
> wrote:
> >>> Hi Jagan,
> >>>
> >>> On Tue, Mar 6, 2018 at 9:25 AM, Jagan Teki <jagannadh.teki at gmail.com>
> wrote:
> >>>> Hi,
> >>>>
> >>>> U-Boot SPL 2018.03-rc3-00111-g0cb2734156-dirty (Mar 06 2018 -
> 17:19:36 +0530)
> >>>> Trying to boot from USB SDP
> >>>> SDP: initialize...
> >>>> SDP: handle requests...
> >>>>
> >>>> and SPL reenumerated USB VID/PID as
> >>>> [24774.255201] usb 1-2: new high-speed USB device number 101 using
> xhci_hcd
> >>>> [24774.425174] usb 1-2: New USB device found, idVendor=0525,
> idProduct=b4a4
> >>>> [24774.425181] usb 1-2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> >>>> [24774.425185] usb 1-2: Product: USB download gadget
> >>>> [24774.425189] usb 1-2: Manufacturer: FSL
> >>>> [24774.433598] hid-generic 0003:0525:B4A4.005C: hiddev97,hidraw2: USB
> >>>> HID v1.10 Device [FSL USB download gadget]
> >>>>
> >>>> Now I've launched u-boot-dtb.img
> >>>>
> >>>> $ imx_usb u-boot-dtb.img
> >>>> ...
> >>>> vid=0x0525 pid=0xb4a4 file_name=mx6_usb_sdp_spl.conf
> >>>> config file <.//mx6_usb_sdp_spl.conf>
> >>>> parse .//mx6_usb_sdp_spl.conf
> >>>> Trying to open device vid=0x0525 pid=0xb4a4
> >>>> Interface 0 claimed
> >>>> HAB security state: development mode (0x56787856)
> >>>> == work item
> >>>> filename /work/code/u-boot/u-boot-dtb.img
> >>>> load_size 0 bytes
> >>>> load_addr 0x00000000
> >>>> dcd 1
> >>>> clear_dcd 0
> >>>> plug 1
> >>>> jump_mode 2
> >>>> jump_addr 0x00000000
> >>>> == end work item
> >>>>
> >>>> unknown load address
> >>>> DoIRomDownload failed, err=-3
> >>>> HAB security state: development mode (0x56787856)
> >>>>
> >>>> Here is mx6_usb_sdp_spl.conf file
> >>>>    mx6_spl_sdp
> >>>>    hid,uboot_header,1024,0x910000,0x10000000,512M,0x00900000,0x40000
> >>>>
> >>>> Look like the u-boot-dtb.img has FIT header and imx_usb can't process
> >>>> the same, any help?
> >>>
> >>> Is this a regression? If so, are you able to run a 'git bisect'?
> >>
> >> I don't think it's regression, I'm guessing this is first test with
> >> u-boot-dtb.img or did you tested the similar image type?
> >>
> >
> > Never tested with u-boot-dtb.img, it worked fine with u-boot.img
> >
> > Best regards,
> > Stefano
> >
> > --
> > =====================================================================
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
> > =====================================================================
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > https://lists.denx.de/listinfo/u-boot
>
>
>
> --
> | Michael Nazzareno Trimarchi                     Amarula Solutions BV |
> | COO  -  Founder                                      Cruquiuskade 47 |
> | +31(0)851119172                                 Amsterdam 1018 AM NL |
> |                  [`as] http://www.amarulasolutions.com               |
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>


More information about the U-Boot mailing list