[U-Boot] [PATCH 1/3] i2c: ihs_i2c: Use new fpgamap interface

Mario Six mario.six at gdsys.cc
Wed Mar 28 12:37:42 UTC 2018


The fpgamap interface has been switched to a "single function + data
size" interface. Reflect this change in the IHS I2C driver.

Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
 drivers/i2c/ihs_i2c.c | 45 ++++++++++++++++++++++++---------------------
 1 file changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c
index 9298521220..82abb439f0 100644
--- a/drivers/i2c/ihs_i2c.c
+++ b/drivers/i2c/ihs_i2c.c
@@ -99,7 +99,8 @@ static int wait_for_int(bool read)
 #endif

 #ifdef CONFIG_DM_I2C
-	fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val);
+	fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val,
+		     FPGAMAP_SIZE_16);
 #else
 	I2C_GET_REG(interrupt_status, &val);
 #endif
@@ -110,7 +111,8 @@ static int wait_for_int(bool read)
 		if (ctr++ > 5000)
 			return 1;
 #ifdef CONFIG_DM_I2C
-		fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val);
+		fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val,
+			     FPGAMAP_SIZE_16);
 #else
 		I2C_GET_REG(interrupt_status, &val);
 #endif
@@ -128,6 +130,7 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
 #endif
 {
 	u16 val;
+	u16 data;
 #ifdef CONFIG_DM_I2C
 	struct ihs_i2c_priv *priv = dev_get_priv(dev);
 	struct udevice *fpga;
@@ -136,13 +139,14 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
 #endif

 	/* Clear interrupt status */
+	data = I2CINT_ERROR_EV | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV;
 #ifdef CONFIG_DM_I2C
-	fpgamap_write16(fpga, priv->addr + REG_INTERRUPT_STATUS,
-			I2CINT_ERROR_EV | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV);
-	fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val);
+	fpgamap_write(fpga, priv->addr + REG_INTERRUPT_STATUS, &data,
+		      FPGAMAP_SIZE_16);
+	fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val,
+		     FPGAMAP_SIZE_16);
 #else
-	I2C_SET_REG(interrupt_status, I2CINT_ERROR_EV
-		     | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV);
+	I2C_SET_REG(interrupt_status, data);
 	I2C_GET_REG(interrupt_status, &val);
 #endif

@@ -153,26 +157,24 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
 		if (len > 1)
 			val |= buffer[1] << 8;
 #ifdef CONFIG_DM_I2C
-		fpgamap_write16(fpga, priv->addr + REG_WRITE_MAILBOX_EXT, val);
+		fpgamap_write(fpga, priv->addr + REG_WRITE_MAILBOX_EXT, &val,
+			      FPGAMAP_SIZE_16);
 #else
 		I2C_SET_REG(write_mailbox_ext, val);
 #endif
 	}

+	data = I2CMB_NATIVE
+	       | (read ? 0 : I2CMB_WRITE)
+	       | (chip << 1)
+	       | ((len > 1) ? I2CMB_2BYTE : 0)
+	       | (is_last ? 0 : I2CMB_HOLD_BUS);
+
 #ifdef CONFIG_DM_I2C
-	fpgamap_write16(fpga, priv->addr + REG_WRITE_MAILBOX,
-			I2CMB_NATIVE
-			| (read ? I2CMB_READ : I2CMB_WRITE)
-			| (chip << 1)
-			| ((len > 1) ? I2CMB_2BYTE : I2CMB_1BYTE)
-			| (!is_last ? I2CMB_HOLD_BUS : I2CMB_DONT_HOLD_BUS));
+	fpgamap_write(fpga, priv->addr + REG_WRITE_MAILBOX, &data,
+		      FPGAMAP_SIZE_16);
 #else
-	I2C_SET_REG(write_mailbox,
-		    I2CMB_NATIVE
-		    | (read ? 0 : I2CMB_WRITE)
-		    | (chip << 1)
-		    | ((len > 1) ? I2CMB_2BYTE : 0)
-		    | (is_last ? 0 : I2CMB_HOLD_BUS));
+	I2C_SET_REG(write_mailbox, data);
 #endif

 #ifdef CONFIG_DM_I2C
@@ -185,7 +187,8 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
 	/* If we want to read, get the bytes from the mailbox */
 	if (read) {
 #ifdef CONFIG_DM_I2C
-		fpgamap_read16(fpga, priv->addr + REG_READ_MAILBOX_EXT, &val);
+		fpgamap_read(fpga, priv->addr + REG_READ_MAILBOX_EXT, &val,
+			     FPGAMAP_SIZE_16);
 #else
 		I2C_GET_REG(read_mailbox_ext, &val);
 #endif
--
2.16.1



More information about the U-Boot mailing list