[U-Boot] [RFC v4 10/15] bmips: enable f at st1704 enet support
Álvaro Fernández Rojas
noltari at gmail.com
Sat Mar 3 08:59:12 UTC 2018
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
v4: no changes
v3: no changes
v2: no changes
arch/mips/dts/sagem,f at st1704.dts | 12 ++++++++++++
configs/sagem_f at st1704_ram_defconfig | 9 ++++++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/mips/dts/sagem,f at st1704.dts b/arch/mips/dts/sagem,f at st1704.dts
index dd0e5b8b7c..99d031f10a 100644
--- a/arch/mips/dts/sagem,f at st1704.dts
+++ b/arch/mips/dts/sagem,f at st1704.dts
@@ -40,6 +40,18 @@
};
};
+&enet {
+ status = "okay";
+ phy = <&enetphy>;
+ phy-mode = "mii";
+
+ enetphy: fixed-link {
+ reg = <1>;
+ speed = <100>;
+ full-duplex;
+ };
+};
+
&gpio {
status = "okay";
};
diff --git a/configs/sagem_f at st1704_ram_defconfig b/configs/sagem_f at st1704_ram_defconfig
index 0adcd46d51..1a640781b7 100644
--- a/configs/sagem_f at st1704_ram_defconfig
+++ b/configs/sagem_f at st1704_ram_defconfig
@@ -28,11 +28,15 @@ CONFIG_CMD_MEMINFO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
-# CONFIG_CMD_NET is not set
+CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
# CONFIG_CMD_MISC is not set
CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_BCM6348_IUDMA=y
CONFIG_DM_GPIO=y
CONFIG_BCM6345_GPIO=y
CONFIG_LED=y
@@ -41,6 +45,9 @@ CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_BCM6348_ETH=y
CONFIG_DM_RESET=y
CONFIG_RESET_BCM6345=y
# CONFIG_SPL_SERIAL_PRESENT is not set
--
2.11.0
More information about the U-Boot
mailing list