[U-Boot] [PATCH v5 08/15] net: add support for bcm6348-enet
Joe Hershberger
joe.hershberger at ni.com
Wed Mar 7 21:46:55 UTC 2018
On Mon, Mar 5, 2018 at 2:05 PM, Álvaro Fernández Rojas
<noltari at gmail.com> wrote:
> Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
> ---
> v5: Receive as much packets as possible from bcm6348-eth and cache them in
> net_rx_packets. This is needed in order to fix flow control issues.
> v4: Fix issues reported by Grygorii Strashko and other fixes:
> - Copy received dma buffer to net_rx_packets in order to avoid possible
> dma overwrites.
> - Reset dma rx channel when sending a new packet to prevent flow control
> issues.
> - Fix packet casting on bcm6348_eth_recv/send.
> v3: no changes
> v2: select DMA_CHANNELS.
>
> drivers/net/Kconfig | 10 +
> drivers/net/Makefile | 1 +
> drivers/net/bcm6348-eth.c | 575 +++++++++++++++++++++++++++++++++++++++++
> include/configs/bmips_common.h | 5 +-
> 4 files changed, 590 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/bcm6348-eth.c
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index de1947ccc1..e532332d78 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -71,6 +71,16 @@ config BCM_SF2_ETH_GMAC
> by the BCM_SF2_ETH driver.
> Say Y to any bcmcygnus based platforms.
>
> +config BCM6348_ETH
> + bool "BCM6348 EMAC support"
> + depends on DM_ETH && ARCH_BMIPS
> + select DMA
> + select DMA_CHANNELS
> + select MII
> + select PHYLIB
> + help
> + This driver supports the BCM6348 Ethernet MAC.
> +
> config DWC_ETH_QOS
> bool "Synopsys DWC Ethernet QOS device support"
> depends on DM_ETH
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index ac5443c752..282adbc775 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -8,6 +8,7 @@
> obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
> obj-$(CONFIG_AG7XXX) += ag7xxx.o
> obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
> +obj-$(CONFIG_BCM6348_ETH) += bcm6348-eth.o
> obj-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
> obj-$(CONFIG_DRIVER_AX88180) += ax88180.o
> obj-$(CONFIG_BCM_SF2_ETH) += bcm-sf2-eth.o
> diff --git a/drivers/net/bcm6348-eth.c b/drivers/net/bcm6348-eth.c
> new file mode 100644
> index 0000000000..43518f7b2d
> --- /dev/null
> +++ b/drivers/net/bcm6348-eth.c
> @@ -0,0 +1,575 @@
> +/*
> + * Copyright (C) 2018 Álvaro Fernández Rojas <noltari at gmail.com>
> + *
> + * Derived from linux/drivers/net/ethernet/broadcom/bcm63xx_enet.c:
> + * Copyright (C) 2008 Maxime Bizon <mbizon at freebox.fr>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <dma.h>
> +#include <miiphy.h>
> +#include <net.h>
> +#include <phy.h>
> +#include <reset.h>
> +#include <wait_bit.h>
> +#include <asm/io.h>
> +
> +#define ETH_RX_DESC PKTBUFSRX
> +#define ETH_MAX_MTU_SIZE 1518
> +#define ETH_TIMEOUT 100
> +#define ETH_TX_WATERMARK 32
> +
> +/* ETH Receiver Configuration register */
> +#define ETH_RXCFG_REG 0x00
> +#define ETH_RXCFG_ENFLOW_SHIFT 5
> +#define ETH_RXCFG_ENFLOW_MASK (1 << ETH_RXCFG_ENFLOW_SHIFT)
> +
> +/* ETH Receive Maximum Length register */
> +#define ETH_RXMAXLEN_REG 0x04
> +#define ETH_RXMAXLEN_SHIFT 0
> +#define ETH_RXMAXLEN_MASK (0x7ff << ETH_RXMAXLEN_SHIFT)
> +
> +/* ETH Transmit Maximum Length register */
> +#define ETH_TXMAXLEN_REG 0x08
> +#define ETH_TXMAXLEN_SHIFT 0
> +#define ETH_TXMAXLEN_MASK (0x7ff << ETH_TXMAXLEN_SHIFT)
> +
> +/* MII Status/Control register */
> +#define MII_SC_REG 0x10
> +#define MII_SC_MDCFREQDIV_SHIFT 0
> +#define MII_SC_MDCFREQDIV_MASK (0x7f << MII_SC_MDCFREQDIV_SHIFT)
> +#define MII_SC_PREAMBLE_EN_SHIFT 7
> +#define MII_SC_PREAMBLE_EN_MASK (1 << MII_SC_PREAMBLE_EN_SHIFT)
> +
> +/* MII Data register */
> +#define MII_DAT_REG 0x14
> +#define MII_DAT_DATA_SHIFT 0
> +#define MII_DAT_DATA_MASK (0xffff << MII_DAT_DATA_SHIFT)
> +#define MII_DAT_TA_SHIFT 16
> +#define MII_DAT_TA_MASK (0x3 << MII_DAT_TA_SHIFT)
> +#define MII_DAT_REG_SHIFT 18
> +#define MII_DAT_REG_MASK (0x1f << MII_DAT_REG_SHIFT)
> +#define MII_DAT_PHY_SHIFT 23
> +#define MII_DAT_PHY_MASK (0x1f << MII_DAT_PHY_SHIFT)
> +#define MII_DAT_OP_SHIFT 28
> +#define MII_DAT_OP_WRITE (0x5 << MII_DAT_OP_SHIFT)
> +#define MII_DAT_OP_READ (0x6 << MII_DAT_OP_SHIFT)
> +
> +/* ETH Interrupts Mask register */
> +#define ETH_IRMASK_REG 0x18
> +
> +/* ETH Interrupts register */
> +#define ETH_IR_REG 0x1c
> +#define ETH_IR_MII_SHIFT 0
> +#define ETH_IR_MII_MASK (1 << ETH_IR_MII_SHIFT)
> +
> +/* ETH Control register */
> +#define ETH_CTL_REG 0x2c
> +#define ETH_CTL_ENABLE_SHIFT 0
> +#define ETH_CTL_ENABLE_MASK (1 << ETH_CTL_ENABLE_SHIFT)
> +#define ETH_CTL_DISABLE_SHIFT 1
> +#define ETH_CTL_DISABLE_MASK (1 << ETH_CTL_DISABLE_SHIFT)
> +#define ETH_CTL_RESET_SHIFT 2
> +#define ETH_CTL_RESET_MASK (1 << ETH_CTL_RESET_SHIFT)
> +#define ETH_CTL_EPHY_SHIFT 3
> +#define ETH_CTL_EPHY_MASK (1 << ETH_CTL_EPHY_SHIFT)
> +
> +/* ETH Transmit Control register */
> +#define ETH_TXCTL_REG 0x30
> +#define ETH_TXCTL_FD_SHIFT 0
> +#define ETH_TXCTL_FD_MASK (1 << ETH_TXCTL_FD_SHIFT)
> +
> +/* ETH Transmit Watermask register */
> +#define ETH_TXWMARK_REG 0x34
> +#define ETH_TXWMARK_WM_SHIFT 0
> +#define ETH_TXWMARK_WM_MASK (0x3f << ETH_TXWMARK_WM_SHIFT)
> +
> +/* MIB Control register */
> +#define MIB_CTL_REG 0x38
> +#define MIB_CTL_RDCLEAR_SHIFT 0
> +#define MIB_CTL_RDCLEAR_MASK (1 << MIB_CTL_RDCLEAR_SHIFT)
> +
> +/* ETH Perfect Match registers */
> +#define ETH_PM_CNT 4
> +#define ETH_PML_REG(x) (0x58 + (x) * 0x8)
> +#define ETH_PMH_REG(x) (0x5c + (x) * 0x8)
> +#define ETH_PMH_VALID_SHIFT 16
> +#define ETH_PMH_VALID_MASK (1 << ETH_PMH_VALID_SHIFT)
> +
> +/* MIB Counters registers */
> +#define MIB_REG_CNT 55
> +#define MIB_REG(x) (0x200 + (x) * 4)
> +
> +/* ETH data */
> +struct bcm6348_eth_priv {
> + void __iomem *base;
> + /* RX */
> + uint8_t rx_desc;
> + uint8_t rx_pend;
> + int rx_ret[ETH_RX_DESC];
> + /* DMA */
> + struct dma rx_dma;
> + struct dma tx_dma;
> + /* PHY */
> + int phy_id;
> + struct phy_device *phy_dev;
> +};
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static void bcm6348_eth_mac_disable(struct bcm6348_eth_priv *priv)
> +{
> + /* disable emac */
> + clrsetbits_be32(priv->base + ETH_CTL_REG, ETH_CTL_ENABLE_MASK,
> + ETH_CTL_DISABLE_MASK);
> +
> + /* wait until emac is disabled */
> + if (wait_for_bit_be32(priv->base + ETH_CTL_REG,
> + ETH_CTL_DISABLE_MASK, false,
> + ETH_TIMEOUT, false))
> + pr_err("error disabling emac\n");
> +}
> +
> +static void bcm6348_eth_mac_enable(struct bcm6348_eth_priv *priv)
> +{
> + setbits_be32(priv->base + ETH_CTL_REG, ETH_CTL_ENABLE_MASK);
> +}
> +
> +static void bcm6348_eth_mac_reset(struct bcm6348_eth_priv *priv)
> +{
> + /* reset emac */
> + writel_be(ETH_CTL_RESET_MASK, priv->base + ETH_CTL_REG);
> + wmb();
> +
> + /* wait until emac is reset */
> + if (wait_for_bit_be32(priv->base + ETH_CTL_REG,
> + ETH_CTL_RESET_MASK, false,
> + ETH_TIMEOUT, false))
> + pr_err("error resetting emac\n");
> +}
> +
> +static int bcm6348_eth_free_pkt(struct udevice *dev, uchar *packet, int len)
> +{
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> +
> + /* sanity check */
> + if (packet != net_rx_packets[priv->rx_pend]) {
> + pr_err("rx_pend %d: packet is not matched,\n", priv->rx_pend);
> + return -EAGAIN;
> + }
> +
> + /* free pending packet */
> + priv->rx_ret[priv->rx_pend] = 0;
> + priv->rx_pend = (priv->rx_pend + 1) % ETH_RX_DESC;
> +
> + return 0;
> +}
> +
> +static int _bcm6348_eth_recv(struct bcm6348_eth_priv *priv)
> +{
> + uint8_t pkt = priv->rx_desc;
> +
> + /* check if packet is free */
> + if (priv->rx_ret[pkt] > 0)
> + return -EAGAIN;
> +
> + /* try to receive a new packet */
> + priv->rx_ret[pkt] = dma_receive(&priv->rx_dma,
> + (void **)&net_rx_packets[pkt]);
> + if (priv->rx_ret[pkt] > 0)
> + priv->rx_desc = (priv->rx_desc + 1) % ETH_RX_DESC;
> +
> + return priv->rx_ret[pkt];
> +}
> +
> +static int bcm6348_eth_recv(struct udevice *dev, int flags, uchar **packetp)
> +{
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> + uint8_t pkt_cnt = 0;
> + int ret;
> +
> + /* try to receive packets */
> + while (_bcm6348_eth_recv(priv) > 0)
> + pkt_cnt++;
> +
> + if (pkt_cnt)
> + debug("%s: received %u packet(s)\n", __func__, pkt_cnt);
> +
> + /* return current packet */
> + ret = priv->rx_ret[priv->rx_pend];
> + if (ret > 0)
> + *packetp = net_rx_packets[priv->rx_pend];
> +
> + return ret;
> +}
> +
> +static int bcm6348_eth_send(struct udevice *dev, void *packet, int length)
> +{
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> +
> + /* reset dma rx channel */
> + dma_disable(&priv->rx_dma);
> + dma_enable(&priv->rx_dma);
Why. Please include reasoning in the comment.
> +
> + return dma_send(&priv->tx_dma, (void *)packet, length);
> +}
> +
> +static int bcm6348_eth_adjust_link(struct udevice *dev,
> + struct phy_device *phydev)
> +{
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> +
> + /* mac duplex parameters */
> + if (phydev->duplex)
> + setbits_be32(priv->base + ETH_TXCTL_REG, ETH_TXCTL_FD_MASK);
> + else
> + clrbits_be32(priv->base + ETH_TXCTL_REG, ETH_TXCTL_FD_MASK);
> +
> + /* rx flow control (pause frame handling) */
> + if (phydev->pause)
> + setbits_be32(priv->base + ETH_RXCFG_REG,
> + ETH_RXCFG_ENFLOW_MASK);
> + else
> + clrbits_be32(priv->base + ETH_RXCFG_REG,
> + ETH_RXCFG_ENFLOW_MASK);
> +
> + return 0;
> +}
> +
> +static int bcm6348_eth_start(struct udevice *dev)
> +{
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> + int ret, i;
> +
> + priv->rx_desc = 0;
> + priv->rx_pend = 0;
> + for (i = 0; i < ETH_RX_DESC; i++)
> + priv->rx_ret[i] = 0;
> +
> + /* enable dma rx channel */
> + dma_enable(&priv->rx_dma);
> +
> + /* enable dma tx channel */
> + dma_enable(&priv->tx_dma);
> +
> + ret = phy_startup(priv->phy_dev);
> + if (ret) {
> + pr_err("could not initialize phy\n");
> + return ret;
> + }
> +
> + if (!priv->phy_dev->link) {
> + pr_err("no phy link\n");
> + return -EIO;
> + }
> +
> + bcm6348_eth_adjust_link(dev, priv->phy_dev);
> +
> + /* zero mib counters */
> + for (i = 0; i < MIB_REG_CNT; i++)
> + writel_be(0, MIB_REG(i));
> +
> + /* enable rx flow control */
> + setbits_be32(priv->base + ETH_RXCFG_REG, ETH_RXCFG_ENFLOW_MASK);
> +
> + /* set max rx/tx length */
> + writel_be((ETH_MAX_MTU_SIZE << ETH_RXMAXLEN_SHIFT) &
> + ETH_RXMAXLEN_MASK, priv->base + ETH_RXMAXLEN_REG);
> + writel_be((ETH_MAX_MTU_SIZE << ETH_TXMAXLEN_SHIFT) &
> + ETH_TXMAXLEN_MASK, priv->base + ETH_TXMAXLEN_REG);
> +
> + /* set correct transmit fifo watermark */
> + writel_be((ETH_TX_WATERMARK << ETH_TXWMARK_WM_SHIFT) &
> + ETH_TXWMARK_WM_MASK, priv->base + ETH_TXWMARK_REG);
> +
> + /* enable emac */
> + bcm6348_eth_mac_enable(priv);
> +
> + /* clear interrupts */
> + writel_be(0, priv->base + ETH_IRMASK_REG);
> +
> + return 0;
> +}
> +
> +static void bcm6348_eth_stop(struct udevice *dev)
> +{
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> +
> + /* disable dma rx channel */
> + dma_disable(&priv->rx_dma);
> +
> + /* disable dma tx channel */
> + dma_disable(&priv->tx_dma);
> +
> + /* disable emac */
> + bcm6348_eth_mac_disable(priv);
> +}
> +
> +static int bcm6348_eth_write_hwaddr(struct udevice *dev)
> +{
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> + bool running = false;
> +
> + /* check if emac is running */
> + if (readl_be(priv->base + ETH_CTL_REG) & ETH_CTL_ENABLE_MASK)
> + running = true;
> +
> + /* disable emac */
> + if (running)
> + bcm6348_eth_mac_disable(priv);
> +
> + /* set mac address */
> + writel_be((pdata->enetaddr[2] << 24) | (pdata->enetaddr[3]) << 16 |
> + (pdata->enetaddr[4]) << 8 | (pdata->enetaddr[5]),
> + priv->base + ETH_PML_REG(0));
> + writel_be((pdata->enetaddr[1]) | (pdata->enetaddr[0] << 8) |
> + ETH_PMH_VALID_MASK, priv->base + ETH_PMH_REG(0));
> +
> + /* enable emac */
> + if (running)
> + bcm6348_eth_mac_enable(priv);
> +
> + return 0;
> +}
> +
> +static const struct eth_ops bcm6348_eth_ops = {
> + .free_pkt = bcm6348_eth_free_pkt,
> + .recv = bcm6348_eth_recv,
> + .send = bcm6348_eth_send,
> + .start = bcm6348_eth_start,
> + .stop = bcm6348_eth_stop,
> + .write_hwaddr = bcm6348_eth_write_hwaddr,
> +};
> +
> +static const struct udevice_id bcm6348_eth_ids[] = {
> + { .compatible = "brcm,bcm6348-enet", },
> + { /* sentinel */ }
> +};
> +
> +static int bcm6348_mdio_op(void __iomem *base, uint32_t data)
> +{
> + /* make sure mii interrupt status is cleared */
> + writel_be(ETH_IR_MII_MASK, base + ETH_IR_REG);
> +
> + /* issue mii op */
> + writel_be(data, base + MII_DAT_REG);
> +
> + /* wait until emac is disabled */
> + return wait_for_bit_be32(base + ETH_IR_REG,
> + ETH_IR_MII_MASK, true,
> + ETH_TIMEOUT, false);
> +}
> +
> +static int bcm6348_mdio_read(struct mii_dev *bus, int addr, int devaddr,
> + int reg)
> +{
> + void __iomem *base = bus->priv;
> + uint32_t val;
> +
> + val = MII_DAT_OP_READ;
> + val |= (reg << MII_DAT_REG_SHIFT) & MII_DAT_REG_MASK;
> + val |= (0x2 << MII_DAT_TA_SHIFT) & MII_DAT_TA_MASK;
> + val |= (addr << MII_DAT_PHY_SHIFT) & MII_DAT_PHY_MASK;
> +
> + if (bcm6348_mdio_op(base, val)) {
> + pr_err("%s: timeout\n", __func__);
> + return -EINVAL;
> + }
> +
> + val = readl_be(base + MII_DAT_REG) & MII_DAT_DATA_MASK;
> + val >>= MII_DAT_DATA_SHIFT;
> +
> + return val;
> +}
> +
> +static int bcm6348_mdio_write(struct mii_dev *bus, int addr, int dev_addr,
> + int reg, u16 value)
> +{
> + void __iomem *base = bus->priv;
> + uint32_t val;
> +
> + val = MII_DAT_OP_WRITE;
> + val |= (reg << MII_DAT_REG_SHIFT) & MII_DAT_REG_MASK;
> + val |= (0x2 << MII_DAT_TA_SHIFT) & MII_DAT_TA_MASK;
> + val |= (addr << MII_DAT_PHY_SHIFT) & MII_DAT_PHY_MASK;
> + val |= (value << MII_DAT_DATA_SHIFT) & MII_DAT_DATA_MASK;
> +
> + if (bcm6348_mdio_op(base, val)) {
> + pr_err("%s: timeout\n", __func__);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int bcm6348_mdio_init(const char *name, void __iomem *base)
> +{
> + struct mii_dev *bus;
> +
> + bus = mdio_alloc();
> + if (!bus) {
> + pr_err("%s: failed to allocate MDIO bus\n", __func__);
> + return -ENOMEM;
> + }
> +
> + bus->read = bcm6348_mdio_read;
> + bus->write = bcm6348_mdio_write;
> + bus->priv = base;
> + snprintf(bus->name, sizeof(bus->name), "%s", name);
> +
> + return mdio_register(bus);
> +}
> +
> +static int bcm6348_phy_init(struct udevice *dev)
> +{
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> + struct mii_dev *bus;
> +
> + /* get mii bus */
> + bus = miiphy_get_dev_by_name(dev->name);
> +
> + /* phy connect */
> + priv->phy_dev = phy_connect(bus, priv->phy_id, dev,
> + pdata->phy_interface);
> + if (!priv->phy_dev) {
> + pr_err("%s: no phy device\n", __func__);
> + return -ENODEV;
> + }
> +
> + priv->phy_dev->supported = (SUPPORTED_10baseT_Half |
> + SUPPORTED_10baseT_Full |
> + SUPPORTED_100baseT_Half |
> + SUPPORTED_100baseT_Full |
> + SUPPORTED_Autoneg |
> + SUPPORTED_Pause |
> + SUPPORTED_MII);
> + priv->phy_dev->advertising = priv->phy_dev->supported;
> +
> + /* phy config */
> + phy_config(priv->phy_dev);
> +
> + return 0;
> +}
> +
> +static int bcm6348_eth_probe(struct udevice *dev)
> +{
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + struct bcm6348_eth_priv *priv = dev_get_priv(dev);
> + void *blob = (void *)gd->fdt_blob;
> + int node = dev_of_offset(dev);
> + const char *phy_mode;
> + fdt_addr_t addr;
> + int phy_node, ret, i;
> +
> + /* get base address */
> + addr = devfdt_get_addr(dev);
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> +
> + /* get phy mode */
> + pdata->phy_interface = PHY_INTERFACE_MODE_NONE;
> + phy_mode = fdt_getprop(blob, node, "phy-mode", NULL);
> + if (phy_mode)
> + pdata->phy_interface = phy_get_interface_by_name(phy_mode);
> + if (pdata->phy_interface == PHY_INTERFACE_MODE_NONE)
> + return -ENODEV;
> +
> + /* get phy */
> + phy_node = fdtdec_lookup_phandle(blob, node, "phy");
> + if (phy_node >= 0)
> + priv->phy_id = fdtdec_get_int(blob, phy_node, "reg", -1);
> + else
> + return -EINVAL;
> +
> + /* get dma channels */
> + ret = dma_get_by_name(dev, "tx", &priv->tx_dma);
> + if (ret)
> + return -EINVAL;
> +
> + ret = dma_get_by_name(dev, "rx", &priv->rx_dma);
> + if (ret)
> + return -EINVAL;
> +
> + /* try to enable clocks */
> + for (i = 0; ; i++) {
> + struct clk clk;
> + int ret;
> +
> + ret = clk_get_by_index(dev, i, &clk);
> + if (ret < 0)
> + break;
> + if (clk_enable(&clk))
> + pr_err("failed to enable clock %d\n", i);
> + clk_free(&clk);
> + }
> +
> + /* try to perform resets */
> + for (i = 0; ; i++) {
> + struct reset_ctl reset;
> + int ret;
> +
> + ret = reset_get_by_index(dev, i, &reset);
> + if (ret < 0)
> + break;
> + if (reset_deassert(&reset))
> + pr_err("failed to deassert reset %d\n", i);
> + reset_free(&reset);
> + }
> +
> + /* get base addr */
> + priv->base = ioremap(addr, 0);
> + pdata->iobase = (phys_addr_t) priv->base;
> +
> + /* disable emac */
> + bcm6348_eth_mac_disable(priv);
> +
> + /* reset emac */
> + bcm6348_eth_mac_reset(priv);
> +
> + /* select correct mii interface */
> + if (pdata->phy_interface == PHY_INTERFACE_MODE_INTERNAL)
> + clrbits_be32(priv->base + ETH_CTL_REG, ETH_CTL_EPHY_MASK);
> + else
> + setbits_be32(priv->base + ETH_CTL_REG, ETH_CTL_EPHY_MASK);
> +
> + /* turn on mdc clock */
> + writel_be((0x1f << MII_SC_MDCFREQDIV_SHIFT) |
> + MII_SC_PREAMBLE_EN_MASK, priv->base + MII_SC_REG);
> +
> + /* set mib counters to not clear when read */
> + clrbits_be32(priv->base + MIB_CTL_REG, MIB_CTL_RDCLEAR_MASK);
> +
> + /* initialize perfect match registers */
> + for (i = 0; i < ETH_PM_CNT; i++) {
> + writel_be(0, priv->base + ETH_PML_REG(i));
> + writel_be(0, priv->base + ETH_PMH_REG(i));
> + }
> +
> + /* init mii bus */
> + ret = bcm6348_mdio_init(dev->name, priv->base);
> + if (ret)
> + return ret;
> +
> + /* init phy */
> + ret = bcm6348_phy_init(dev);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +U_BOOT_DRIVER(bcm6348_eth) = {
> + .name = "bcm6348_eth",
> + .id = UCLASS_ETH,
> + .of_match = bcm6348_eth_ids,
> + .ops = &bcm6348_eth_ops,
> + .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> + .priv_auto_alloc_size = sizeof(struct bcm6348_eth_priv),
> + .probe = bcm6348_eth_probe,
> +};
> diff --git a/include/configs/bmips_common.h b/include/configs/bmips_common.h
> index 38bf7a272b..eb66512f67 100644
> --- a/include/configs/bmips_common.h
> +++ b/include/configs/bmips_common.h
> @@ -7,6 +7,9 @@
> #ifndef __CONFIG_BMIPS_COMMON_H
> #define __CONFIG_BMIPS_COMMON_H
>
> +/* ETH */
> +#define CONFIG_PHY_RESET_DELAY 20
> +
> /* UART */
> #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \
> 230400, 500000, 1500000 }
> @@ -17,7 +20,7 @@
>
> /* Memory usage */
> #define CONFIG_SYS_MAXARGS 24
> -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
> +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
> #define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
> #define CONFIG_SYS_CBSIZE 512
>
> --
> 2.11.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
More information about the U-Boot
mailing list