[U-Boot] [PATCH v3] common: add a prototype for mach_cpu_init()

Masahiro Yamada yamada.masahiro at socionext.com
Mon Mar 12 01:34:52 UTC 2018


2018-03-10 2:28 GMT+09:00 Patrick Delaunay <patrick.delaunay at st.com>:
> Add a new file init.h with the prototype for arch_cpu_init
> Add a prototype for mach_cpu_init() to avoid a warning:
> no previous prototype for ‘mach_cpu_init’
>
> It is a first step to move all the functions prototype
> used during U-Boot initialization (board_f.c / board_r.c)
> from common.h to init.h
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>

Reviewed-by: Masahiro Yamada <yamada.masahiro at socionext.com>




> Changes in v3:
> - create file init.h after Yamada Masahiro review
>
> Changes in v2:
> - add return info for functions mach_cpu_init() and arch_cpu_init()
>
>  include/common.h | 13 +++----------
>  include/init.h   | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 54 insertions(+), 10 deletions(-)
>  create mode 100644 include/init.h
>
> diff --git a/include/common.h b/include/common.h
> index 0fe9439..11e5459 100644
> --- a/include/common.h
> +++ b/include/common.h
> @@ -62,6 +62,9 @@ typedef void (interrupt_handler_t)(void *);
>  #define        TOTAL_MALLOC_LEN        CONFIG_SYS_MALLOC_LEN
>  #endif
>
> +/* startup functions */
> +#include <init.h>
> +
>  /*
>   * Function Prototypes
>   */
> @@ -464,16 +467,6 @@ u32        cpu_mask      (void);
>  u32    cpu_dsp_mask(void);
>  int    is_core_valid (unsigned int);
>
> -/**
> - * arch_cpu_init() - basic cpu-dependent setup for an architecture
> - *
> - * This is called after early malloc is available. It should handle any
> - * CPU- or SoC- specific init needed to continue the init sequence. See
> - * board_f.c for where it is called. If this is not provided, a default
> - * version (which does nothing) will be used.
> - */
> -int arch_cpu_init(void);
> -
>  void s_init(void);
>
>  int    checkcpu      (void);
> diff --git a/include/init.h b/include/init.h
> new file mode 100644
> index 0000000..324fbe0
> --- /dev/null
> +++ b/include/init.h
> @@ -0,0 +1,51 @@
> +/*
> + * (C) Copyright 2000-2009
> + * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> + *
> + * Copy the startup prototype, previously defined in common.h
> + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +
> +#ifndef __INIT_H_
> +#define __INIT_H_      1
> +
> +#ifndef __ASSEMBLY__           /* put C only stuff in this section */
> +
> +/*
> + * Function Prototypes
> + */
> +
> +/* common/board_f.c */
> +
> +/**
> + * arch_cpu_init() - basic cpu-dependent setup for an architecture
> + *
> + * This is called after early malloc is available. It should handle any
> + * CPU- or SoC- specific init needed to continue the init sequence. See
> + * board_f.c for where it is called. If this is not provided, a default
> + * version (which does nothing) will be used.
> + *
> + * @return: 0 on success, otherwise error
> + */
> +int arch_cpu_init(void);
> +
> +/**
> + * mach_cpu_init() - SoC/machine dependent CPU setup
> + *
> + * This is called after arch_cpu_init(). It should handle any
> + * SoC or machine specific init needed to continue the init sequence. See
> + * board_f.c for where it is called. If this is not provided, a default
> + * version (which does nothing) will be used.
> + *
> + * @return: 0 on success, otherwise error
> + */
> +int mach_cpu_init(void);
> +
> +/* common/board_r.c */
> +
> +#endif /* __ASSEMBLY__ */
> +/* Put only stuff here that the assembler can digest */
> +
> +#endif /* __INIT_H_ */
> --
> 2.7.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot



-- 
Best Regards
Masahiro Yamada


More information about the U-Boot mailing list