[U-Boot] [PATCH v2 3/3] imx: hab: Provide hab_auth_img_or_fail command

[Breno Matheus Lima]

Hi All,

2018-03-27 19:44 GMT-03:00 Breno Matheus Lima <brenomatheus at gmail.com>:
> Hi Bryan,
>
> 2018-03-26 11:11 GMT-03:00 Bryan O'Donoghue <bryan.odonoghue at linaro.org>:
>> This patch adds hab_auth_img_or_fail() a command line function that
>> encapsulates a common usage of authenticate and failover, namely if
>> authenticate image fails, then drop to BootROM USB recovery mode.
>>
>> For secure-boot systems, this type of locked down behavior is important to
>> ensure no unsigned images can be run.
>>
>> It's possible to script this logic but, when done over and over again the
>> environment starts get very complex and repetitive, reducing that script
>> repetition down to a command line function makes sense.
>>
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
>> Cc: Utkarsh Gupta <utkarsh.gupta at nxp.com>
>> Cc: Breno Lima <breno.lima at nxp.com>
>> Cc: Fabio Estevam <fabio.estevam at nxp.com>
>
> Tested-by: Breno Lima <breno.lima at nxp.com>
>
> Thanks,
> Breno

Sorry, I have comment on the wrong series, my intention was to comment
on V3 series. I will resend the tested-by

Thanks,
Breno Matheus Lima