[U-Boot] [PATCH v2 11/20] ARC: cache: get rid of [slc, pae, icache, dcache]_exists global variables
Eugeniy Paltsev
Eugeniy.Paltsev at synopsys.com
Wed Mar 21 12:58:56 UTC 2018
There is the problem with current implementation if we start u-boot
from ROM, as we use cache global variables before ther initialization,
so these variables are overwritten when we copy .data section
from ROM.
So use icache_exists(), dcache_exists(), slc_exists(), pae_exists()
functions which check BCRs every time instead of corresponding
global variables.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
arch/arc/lib/cache.c | 67 +++++++++++++++++++++++++++++++++-------------------
1 file changed, 43 insertions(+), 24 deletions(-)
diff --git a/arch/arc/lib/cache.c b/arch/arc/lib/cache.c
index f147674ae8..1b74f55ab7 100644
--- a/arch/arc/lib/cache.c
+++ b/arch/arc/lib/cache.c
@@ -94,7 +94,6 @@
#define DC_CTRL_CACHE_DISABLE BIT(0)
#define DC_CTRL_INV_MODE_FLUSH BIT(6)
#define DC_CTRL_FLUSH_STATUS BIT(8)
-#define CACHE_VER_NUM_MASK 0xF
#define OP_INV BIT(0)
#define OP_FLUSH BIT(1)
@@ -112,20 +111,16 @@
* relocation but will be used after being zeroed.
*/
int l1_line_sz __section(".data");
-bool dcache_exists __section(".data") = false;
-bool icache_exists __section(".data") = false;
#define CACHE_LINE_MASK (~(l1_line_sz - 1))
int slc_line_sz __section(".data");
-bool slc_exists __section(".data") = false;
bool ioc_exists __section(".data") = false;
-bool pae_exists __section(".data") = false;
/* To force enable IOC set ioc_enable to 'true' */
bool ioc_enable __section(".data") = false;
-void read_decode_mmu_bcr(void)
+static inline bool pae_exists(void)
{
/* TODO: should we compare mmu version from BCR and from CONFIG? */
#if (CONFIG_ARC_MMU_VER >= 4)
@@ -133,15 +128,46 @@ void read_decode_mmu_bcr(void)
mmu4.word = read_aux_reg(ARC_AUX_MMU_BCR);
- pae_exists = !!mmu4.fields.pae;
+ if (mmu4.fields.pae)
+ return true;
#endif /* (CONFIG_ARC_MMU_VER >= 4) */
+
+ return false;
+}
+
+static inline bool icache_exists(void)
+{
+ union bcr_di_cache ibcr;
+
+ ibcr.word = read_aux_reg(ARC_BCR_IC_BUILD);
+ return !!ibcr.fields.ver;
+}
+
+static inline bool dcache_exists(void)
+{
+ union bcr_di_cache dbcr;
+
+ dbcr.word = read_aux_reg(ARC_BCR_DC_BUILD);
+ return !!dbcr.fields.ver;
+}
+
+static inline bool slc_exists(void)
+{
+ if (is_isa_arcv2()) {
+ union bcr_generic sbcr;
+
+ sbcr.word = read_aux_reg(ARC_BCR_SLC);
+ return !!sbcr.fields.ver;
+ }
+
+ return false;
}
static void __slc_entire_op(const int op)
{
unsigned int ctrl;
- if (!slc_exists)
+ if (!slc_exists())
return;
ctrl = read_aux_reg(ARC_AUX_SLC_CTRL);
@@ -182,7 +208,7 @@ static void __slc_rgn_op(unsigned long paddr, unsigned long sz, const int op)
unsigned int ctrl;
unsigned long end;
- if (!slc_exists)
+ if (!slc_exists())
return;
/*
@@ -263,12 +289,9 @@ static void read_decode_cache_bcr_arcv2(void)
union bcr_slc_cfg slc_cfg;
union bcr_clust_cfg cbcr;
- union bcr_generic sbcr;
- sbcr.word = read_aux_reg(ARC_BCR_SLC);
- if (sbcr.fields.ver) {
+ if (slc_exists()) {
slc_cfg.word = read_aux_reg(ARC_AUX_SLC_CONFIG);
- slc_exists = true;
slc_line_sz = (slc_cfg.fields.lsz == 0) ? 128 : 64;
}
@@ -286,7 +309,6 @@ void read_decode_cache_bcr(void)
ibcr.word = read_aux_reg(ARC_BCR_IC_BUILD);
if (ibcr.fields.ver) {
- icache_exists = true;
l1_line_sz = ic_line_sz = 8 << ibcr.fields.line_len;
if (!ic_line_sz)
panic("Instruction exists but line length is 0\n");
@@ -294,7 +316,6 @@ void read_decode_cache_bcr(void)
dbcr.word = read_aux_reg(ARC_BCR_DC_BUILD);
if (dbcr.fields.ver) {
- dcache_exists = true;
l1_line_sz = dc_line_sz = 16 << dbcr.fields.line_len;
if (!dc_line_sz)
panic("Data cache exists but line length is 0\n");
@@ -314,20 +335,18 @@ void cache_init(void)
if (is_isa_arcv2() && ioc_exists)
arc_ioc_setup();
- read_decode_mmu_bcr();
-
/*
* ARC_AUX_SLC_RGN_START1 and ARC_AUX_SLC_RGN_END1 register exist
* only if PAE exists in current HW. So we had to check pae_exist
* before using them.
*/
- if (is_isa_arcv2() && slc_exists && pae_exists)
+ if (is_isa_arcv2() && slc_exists() && pae_exists())
slc_upper_region_init();
}
int icache_status(void)
{
- if (!icache_exists)
+ if (!icache_exists())
return 0;
if (read_aux_reg(ARC_AUX_IC_CTRL) & IC_CTRL_CACHE_DISABLE)
@@ -338,14 +357,14 @@ int icache_status(void)
void icache_enable(void)
{
- if (icache_exists)
+ if (icache_exists())
write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) &
~IC_CTRL_CACHE_DISABLE);
}
void icache_disable(void)
{
- if (icache_exists)
+ if (icache_exists())
write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) |
IC_CTRL_CACHE_DISABLE);
}
@@ -378,7 +397,7 @@ void invalidate_icache_all(void)
int dcache_status(void)
{
- if (!dcache_exists)
+ if (!dcache_exists())
return 0;
if (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_CACHE_DISABLE)
@@ -389,7 +408,7 @@ int dcache_status(void)
void dcache_enable(void)
{
- if (!dcache_exists)
+ if (!dcache_exists())
return;
write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) &
@@ -398,7 +417,7 @@ void dcache_enable(void)
void dcache_disable(void)
{
- if (!dcache_exists)
+ if (!dcache_exists())
return;
write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) |
--
2.14.3
More information about the U-Boot
mailing list