[U-Boot] [PATCH 3/4] stm32mp1: get boot mode from BootRom
Patrick Delaunay
patrick.delaunay at st.com
Tue Mar 20 09:54:53 UTC 2018
SPL copy BootRom boot mode information
in TAMP register 21.
This TAMP register information is used
after relocation to set 2 env variables
- boot_device
- boot_instance
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-stm32mp/cpu.c | 92 ++++++++++++++++++++++++++++++
arch/arm/mach-stm32mp/include/mach/stm32.h | 53 +++++++++++++++++
3 files changed, 146 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 14c13b4..425f533 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1150,6 +1150,7 @@ config ARCH_STI
config ARCH_STM32MP
bool "Support STMicroelectronics STM32MP Socs with cortex A"
+ select ARCH_MISC_INIT
select BOARD_LATE_INIT
select CLK
select DM
diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
index 3e5ac15..4ba2aec 100644
--- a/arch/arm/mach-stm32mp/cpu.c
+++ b/arch/arm/mach-stm32mp/cpu.c
@@ -8,6 +8,7 @@
#include <asm/io.h>
#include <asm/arch/stm32.h>
#include <asm/arch/sys_proto.h>
+#include <dm/uclass.h>
/* RCC register */
#define RCC_TZCR (STM32_RCC_BASE + 0x00)
@@ -40,6 +41,16 @@
#define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16)
#define DBGMCU_IDC_REV_ID_SHIFT 16
+/* boot interface from Bootrom
+ * - boot instance = bit 31:16
+ * - boot device = bit 15:0
+ */
+#define BOOTROM_PARAM_ADDR 0x2FFC0078
+#define BOOTROM_MODE_MASK GENMASK(15, 0)
+#define BOOTROM_MODE_SHIFT 0
+#define BOOTROM_INSTANCE_MASK GENMASK(31, 16)
+#define BOOTROM_INSTANCE_SHIFT 16
+
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
static void security_init(void)
{
@@ -109,6 +120,37 @@ static void dbgmcu_init(void)
}
#endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */
+static u32 get_bootmode(void)
+{
+ u32 boot_mode;
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+ u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
+ u32 bootrom_device, bootrom_instance;
+
+ bootrom_device =
+ (bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
+ bootrom_instance =
+ (bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
+ boot_mode =
+ ((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
+ ((bootrom_instance << BOOT_INSTANCE_SHIFT) &
+ BOOT_INSTANCE_MASK);
+
+ /* save the boot mode in TAMP backup register */
+ clrsetbits_le32(TAMP_BOOT_CONTEXT,
+ TAMP_BOOT_MODE_MASK,
+ boot_mode << TAMP_BOOT_MODE_SHIFT);
+#else
+ /* read TAMP backup register */
+ boot_mode = (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
+ TAMP_BOOT_MODE_SHIFT;
+#endif
+ return boot_mode;
+}
+
+/*
+ * Early system init
+ */
int arch_cpu_init(void)
{
/* early armv7 timer init: needed for polling */
@@ -119,6 +161,8 @@ int arch_cpu_init(void)
security_init();
#endif
+ /* get bootmode from BootRom context: saved in TAMP register */
+ get_bootmode();
return 0;
}
@@ -178,6 +222,54 @@ int print_cpuinfo(void)
}
#endif /* CONFIG_DISPLAY_CPUINFO */
+static void setup_boot_mode(void)
+{
+ char cmd[60];
+ u32 boot_ctx = readl(TAMP_BOOT_CONTEXT);
+ u32 boot_mode =
+ (boot_ctx & TAMP_BOOT_MODE_MASK) >> TAMP_BOOT_MODE_SHIFT;
+ int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1;
+
+ pr_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d\n",
+ __func__, boot_ctx, boot_mode, instance);
+
+ switch (boot_mode & TAMP_BOOT_DEVICE_MASK) {
+ case BOOT_SERIAL_UART:
+ sprintf(cmd, "%d", instance);
+ env_set("boot_device", "uart");
+ env_set("boot_instance", cmd);
+ break;
+ case BOOT_SERIAL_USB:
+ env_set("boot_device", "usb");
+ env_set("boot_instance", "0");
+ break;
+ case BOOT_FLASH_SD:
+ case BOOT_FLASH_EMMC:
+ sprintf(cmd, "%d", instance);
+ env_set("boot_device", "mmc");
+ env_set("boot_instance", cmd);
+ break;
+ case BOOT_FLASH_NAND:
+ env_set("boot_device", "nand");
+ env_set("boot_instance", "0");
+ break;
+ case BOOT_FLASH_NOR:
+ env_set("boot_device", "nor");
+ env_set("boot_instance", "0");
+ break;
+ default:
+ pr_debug("unexpected boot mode = %x\n", boot_mode);
+ break;
+ }
+}
+
+int arch_misc_init(void)
+{
+ setup_boot_mode();
+
+ return 0;
+}
+
void reset_cpu(ulong addr)
{
}
diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index ffbe0b1..40faeb0 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -24,4 +24,57 @@
#define STM32_DDR_BASE 0xC0000000
#define STM32_DDR_SIZE SZ_1G
+#ifndef __ASSEMBLY__
+
+/*
+ * enumerated for boot interface from Bootrom, used in TAMP_BOOT_CONTEXT
+ * - boot device = bit 8:4
+ * - boot instance = bit 3:0
+ */
+#define BOOT_TYPE_MASK 0xF0
+#define BOOT_TYPE_SHIFT 4
+#define BOOT_INSTANCE_MASK 0x0F
+#define BOOT_INSTANCE_SHIFT 0
+
+enum boot_device {
+ BOOT_FLASH_SD = 0x10,
+ BOOT_FLASH_SD_1 = 0x11,
+ BOOT_FLASH_SD_2 = 0x12,
+ BOOT_FLASH_SD_3 = 0x13,
+
+ BOOT_FLASH_EMMC = 0x20,
+ BOOT_FLASH_EMMC_1 = 0x21,
+ BOOT_FLASH_EMMC_2 = 0x22,
+ BOOT_FLASH_EMMC_3 = 0x23,
+
+ BOOT_FLASH_NAND = 0x30,
+ BOOT_FLASH_NAND_FMC = 0x31,
+
+ BOOT_FLASH_NOR = 0x40,
+ BOOT_FLASH_NOR_QSPI = 0x41,
+
+ BOOT_SERIAL_UART = 0x50,
+ BOOT_SERIAL_UART_1 = 0x51,
+ BOOT_SERIAL_UART_2 = 0x52,
+ BOOT_SERIAL_UART_3 = 0x53,
+ BOOT_SERIAL_UART_4 = 0x54,
+ BOOT_SERIAL_UART_5 = 0x55,
+ BOOT_SERIAL_UART_6 = 0x56,
+ BOOT_SERIAL_UART_7 = 0x57,
+ BOOT_SERIAL_UART_8 = 0x58,
+
+ BOOT_SERIAL_USB = 0x60,
+ BOOT_SERIAL_USB_OTG = 0x62,
+};
+
+/* TAMP registers */
+#define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x)
+#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(20)
+
+#define TAMP_BOOT_MODE_MASK GENMASK(15, 8)
+#define TAMP_BOOT_MODE_SHIFT 8
+#define TAMP_BOOT_DEVICE_MASK GENMASK(7, 4)
+#define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0)
+
+#endif /* __ASSEMBLY__*/
#endif /* _MACH_STM32_H_ */
--
2.7.4
More information about the U-Boot
mailing list