[U-Boot] [PATCH v3 04/10] otm

[Patrice CHOTARD]

Hi Yannick

There is a problem with patch 4. I received two patches 04/10, this one 
and [PATCH v3 04/10] video: add support of panel OTM8009A.

Patrice

On 03/13/2018 02:50 PM, yannick fertre wrote:
> ---
>   drivers/video/orisetech_otm8009a.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/orisetech_otm8009a.c b/drivers/video/orisetech_otm8009a.c
> index 81b11d7..aa8139a 100644
> --- a/drivers/video/orisetech_otm8009a.c
> +++ b/drivers/video/orisetech_otm8009a.c
> @@ -289,9 +289,11 @@ static int otm8009a_panel_probe(struct udevice *dev)
>   	struct otm8009a_panel_priv *priv = dev_get_priv(dev);
>   	int ret;
>   
> -	/* reset panel must be done before probe */
> +	/* reset panel */
>   	dm_gpio_set_value(&priv->reset, true);
>   
> +	mdelay(1);
> +
>   	if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
>   		dev_err(dev, "enable regulator '%s'\n", priv->reg->name);
>   		ret = regulator_set_enable(priv->reg, true);
>