[U-Boot] [PATCH v2 01/10] video: stm32: stm32_ltdc: add bridge to display controller
Patrice CHOTARD
patrice.chotard at st.com
Tue Mar 13 08:44:48 UTC 2018
Hi Yannick
On 03/02/2018 04:44 PM, yannick fertre wrote:
> Manage a bridge insert between the display controller & a panel.
>
> Signed-off-by: yannick fertre <yannick.fertre at st.com>
> ---
> drivers/video/stm32/stm32_ltdc.c | 107 ++++++++++++++++++++++++++-------------
> 1 file changed, 71 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
> index e160c77..bd9c0de 100644
> --- a/drivers/video/stm32/stm32_ltdc.c
> +++ b/drivers/video/stm32/stm32_ltdc.c
> @@ -8,6 +8,7 @@
>
> #include <common.h>
> #include <clk.h>
> +#include <display.h>
> #include <dm.h>
> #include <panel.h>
> #include <reset.h>
> @@ -15,12 +16,12 @@
> #include <asm/io.h>
> #include <asm/arch/gpio.h>
> #include <dm/device-internal.h>
> +#include <video_bridge.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> struct stm32_ltdc_priv {
> void __iomem *regs;
> - struct display_timing timing;
> enum video_log2_bpp l2bpp;
> u32 bg_col_argb;
> u32 crop_x, crop_y, crop_w, crop_h;
> @@ -210,23 +211,23 @@ static void stm32_ltdc_enable(struct stm32_ltdc_priv *priv)
> setbits_le32(priv->regs + LTDC_GCR, GCR_LTDCEN);
> }
>
> -static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv)
> +static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,
> + struct display_timing *timings)
> {
> void __iomem *regs = priv->regs;
> - struct display_timing *timing = &priv->timing;
> u32 hsync, vsync, acc_hbp, acc_vbp, acc_act_w, acc_act_h;
> u32 total_w, total_h;
> u32 val;
>
> /* Convert video timings to ltdc timings */
> - hsync = timing->hsync_len.typ - 1;
> - vsync = timing->vsync_len.typ - 1;
> - acc_hbp = hsync + timing->hback_porch.typ;
> - acc_vbp = vsync + timing->vback_porch.typ;
> - acc_act_w = acc_hbp + timing->hactive.typ;
> - acc_act_h = acc_vbp + timing->vactive.typ;
> - total_w = acc_act_w + timing->hfront_porch.typ;
> - total_h = acc_act_h + timing->vfront_porch.typ;
> + hsync = timings->hsync_len.typ - 1;
> + vsync = timings->vsync_len.typ - 1;
> + acc_hbp = hsync + timings->hback_porch.typ;
> + acc_vbp = vsync + timings->vback_porch.typ;
> + acc_act_w = acc_hbp + timings->hactive.typ;
> + acc_act_h = acc_vbp + timings->vactive.typ;
> + total_w = acc_act_w + timings->hfront_porch.typ;
> + total_h = acc_act_h + timings->vfront_porch.typ;
>
> /* Synchronization sizes */
> val = (hsync << 16) | vsync;
> @@ -248,14 +249,14 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv)
>
> /* Signal polarities */
> val = 0;
> - debug("%s: timing->flags 0x%08x\n", __func__, timing->flags);
> - if (timing->flags & DISPLAY_FLAGS_HSYNC_HIGH)
> + debug("%s: timing->flags 0x%08x\n", __func__, timings->flags);
> + if (timings->flags & DISPLAY_FLAGS_HSYNC_HIGH)
> val |= GCR_HSPOL;
> - if (timing->flags & DISPLAY_FLAGS_VSYNC_HIGH)
> + if (timings->flags & DISPLAY_FLAGS_VSYNC_HIGH)
> val |= GCR_VSPOL;
> - if (timing->flags & DISPLAY_FLAGS_DE_HIGH)
> + if (timings->flags & DISPLAY_FLAGS_DE_HIGH)
> val |= GCR_DEPOL;
> - if (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> + if (timings->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> val |= GCR_PCPOL;
> clrsetbits_le32(regs + LTDC_GCR,
> GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
> @@ -331,7 +332,11 @@ static int stm32_ltdc_probe(struct udevice *dev)
> struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
> struct video_priv *uc_priv = dev_get_uclass_priv(dev);
> struct stm32_ltdc_priv *priv = dev_get_priv(dev);
> - struct udevice *panel;
> +#ifdef CONFIG_VIDEO_BRIDGE
> + struct udevice *bridge = NULL;
> +#endif
> + struct udevice *panel = NULL;
> + struct display_timing timings;
> struct clk pclk;
> struct reset_ctl rst;
> int rate, ret;
> @@ -364,63 +369,93 @@ static int stm32_ltdc_probe(struct udevice *dev)
> /* Reset */
> reset_deassert(&rst);
>
> - ret = uclass_first_device(UCLASS_PANEL, &panel);
> +#ifdef CONFIG_VIDEO_BRIDGE
> + ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge);
> if (ret) {
> - debug("%s: panel device error %d\n", __func__, ret);
> - return ret;
> + debug("%s: No video bridge, or no backlight on bridge\n",
> + __func__);
> }
>
> - ret = panel_enable_backlight(panel);
> + if (bridge) {
> + ret = video_bridge_attach(bridge);
> + if (ret) {
> + debug("%s: fail to attach bridge\n", __func__);
I would replace debug by dev_err() here.
> + return ret;
> + }
> + }
> +#endif
> + ret = uclass_first_device(UCLASS_PANEL, &panel);
> if (ret) {
> - debug("%s: panel %s enable backlight error %d\n",
> - __func__, panel->name, ret);
> + debug("%s: panel device error %d\n", __func__, ret);
Ditto
> return ret;
> }
>
> - ret = fdtdec_decode_display_timing(gd->fdt_blob,
> - dev_of_offset(dev), 0,
> - &priv->timing);
> + ret = fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(panel),
> + 0, &timings);
> if (ret) {
> debug("%s: decode display timing error %d\n",
> __func__, ret);
> - return -EINVAL;
Ditto
> + return ret;
> }
>
> - rate = clk_set_rate(&pclk, priv->timing.pixelclock.typ);
> + rate = clk_set_rate(&pclk, timings.pixelclock.typ);
> if (rate < 0) {
> debug("%s: fail to set pixel clock %d hz %d hz\n",
> - __func__, priv->timing.pixelclock.typ, rate);
> + __func__, timings.pixelclock.typ, rate);
Ditto
> return rate;
> }
>
> debug("%s: Set pixel clock req %d hz get %d hz\n", __func__,
> - priv->timing.pixelclock.typ, rate);
> + timings.pixelclock.typ, rate);
>
> /* TODO Below parameters are hard-coded for the moment... */
> priv->l2bpp = VIDEO_BPP16;
> priv->bg_col_argb = 0xFFFFFFFF; /* white no transparency */
> priv->crop_x = 0;
> priv->crop_y = 0;
> - priv->crop_w = priv->timing.hactive.typ;
> - priv->crop_h = priv->timing.vactive.typ;
> + priv->crop_w = timings.hactive.typ;
> + priv->crop_h = timings.vactive.typ;
> priv->alpha = 0xFF;
>
> debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__,
> - priv->timing.hactive.typ, priv->timing.vactive.typ,
> + timings.hactive.typ, timings.vactive.typ,
> VNBITS(priv->l2bpp), uc_plat->base);
> debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__,
> priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h,
> priv->bg_col_argb, priv->alpha);
>
> /* Configure & start LTDC */
> - stm32_ltdc_set_mode(priv);
> + stm32_ltdc_set_mode(priv, &timings);
> stm32_ltdc_set_layer1(priv, uc_plat->base);
> stm32_ltdc_enable(priv);
>
> - uc_priv->xsize = priv->timing.hactive.typ;
> - uc_priv->ysize = priv->timing.vactive.typ;
> + uc_priv->xsize = timings.hactive.typ;
> + uc_priv->ysize = timings.vactive.typ;
> uc_priv->bpix = priv->l2bpp;
>
> +#ifdef CONFIG_VIDEO_BRIDGE
> + if (bridge) {
> + ret = video_bridge_set_backlight(bridge, 80);
> + if (ret) {
> + debug("%s: fail to set backlight\n", __func__);
Ditto
> + return ret;
> + }
> + } else {
> + ret = panel_enable_backlight(panel);
> + if (ret) {
> + debug("%s: panel %s enable backlight error %d\n",
> + __func__, panel->name, ret);
Ditto
> + return ret;
> + }
> + }
> +#else
> + ret = panel_enable_backlight(panel);
> + if (ret) {
> + debug("%s: panel %s enable backlight error %d\n",
> + __func__, panel->name, ret);
Ditto
> + return ret;
> + }
> +#endif
> video_set_flush_dcache(dev, true);
>
> return 0;
>
More information about the U-Boot
mailing list