[U-Boot] [RFC PATCH] net: phy: Don't limit phy addresses by default
Joe Hershberger
joe.hershberger at ni.com
Fri Mar 30 16:52:16 UTC 2018
Some boards expect to find more than one phy while other boards are old
and need to be limited to a specific phy address. Only limit the phy
address for boards that opt in.
Signed-off-by: Joe Hershberger <joe.hershberger at ni.com>
---
configs/am335x_baltos_defconfig | 1 +
configs/am335x_shc_defconfig | 1 +
configs/am335x_shc_ict_defconfig | 1 +
configs/am335x_shc_netboot_defconfig | 1 +
configs/am335x_shc_prompt_defconfig | 1 +
configs/am335x_shc_sdboot_defconfig | 1 +
configs/am335x_shc_sdboot_prompt_defconfig | 1 +
configs/devkit3250_defconfig | 1 +
configs/ds414_defconfig | 1 +
configs/khadas-vim_defconfig | 1 +
configs/libretech-cc_defconfig | 1 +
configs/p212_defconfig | 1 +
configs/pepper_defconfig | 1 +
configs/work_92105_defconfig | 1 +
configs/x600_defconfig | 1 +
drivers/net/phy/Kconfig | 8 ++++++++
16 files changed, 23 insertions(+)
diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
index ab7d96d..ed7d3a7 100644
--- a/configs/am335x_baltos_defconfig
+++ b/configs/am335x_baltos_defconfig
@@ -42,6 +42,7 @@ CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_OMAP24_I2C_SPEED=1000
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig
index fb714da..ade16b9 100644
--- a/configs/am335x_shc_defconfig
+++ b/configs/am335x_shc_defconfig
@@ -35,6 +35,7 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MMC_OMAP_HS=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig
index 2568e3d..ac19a74 100644
--- a/configs/am335x_shc_ict_defconfig
+++ b/configs/am335x_shc_ict_defconfig
@@ -36,6 +36,7 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MMC_OMAP_HS=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig
index 16071fb..31f1847 100644
--- a/configs/am335x_shc_netboot_defconfig
+++ b/configs/am335x_shc_netboot_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MMC_OMAP_HS=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
diff --git a/configs/am335x_shc_prompt_defconfig b/configs/am335x_shc_prompt_defconfig
index bbad6dd..803304e 100644
--- a/configs/am335x_shc_prompt_defconfig
+++ b/configs/am335x_shc_prompt_defconfig
@@ -34,6 +34,7 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MMC_OMAP_HS=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig
index 82a61a3..2d4f4d1 100644
--- a/configs/am335x_shc_sdboot_defconfig
+++ b/configs/am335x_shc_sdboot_defconfig
@@ -36,6 +36,7 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MMC_OMAP_HS=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
diff --git a/configs/am335x_shc_sdboot_prompt_defconfig b/configs/am335x_shc_sdboot_prompt_defconfig
index 82a61a3..2d4f4d1 100644
--- a/configs/am335x_shc_sdboot_prompt_defconfig
+++ b/configs/am335x_shc_sdboot_prompt_defconfig
@@ -36,6 +36,7 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_MMC=y
CONFIG_MMC_OMAP_HS=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHYLIB=y
CONFIG_SYS_NS16550=y
CONFIG_OMAP3_SPI=y
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index e1a9b49..b69808c 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -36,6 +36,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_NAND=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=31
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig
index 5d1d6ab..d68e64e 100644
--- a/configs/ds414_defconfig
+++ b/configs/ds414_defconfig
@@ -39,6 +39,7 @@ CONFIG_SPL_OF_TRANSLATE=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_GIGE=y
CONFIG_MVNETA=y
CONFIG_PCI=y
diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig
index f4674ef..0bfb594 100644
--- a/configs/khadas-vim_defconfig
+++ b/configs/khadas-vim_defconfig
@@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=8
CONFIG_PHY_MESON_GXL=y
CONFIG_DM_ETH=y
diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig
index 18ddb45..931496c 100644
--- a/configs/libretech-cc_defconfig
+++ b/configs/libretech-cc_defconfig
@@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=8
CONFIG_PHY_MESON_GXL=y
CONFIG_DM_ETH=y
diff --git a/configs/p212_defconfig b/configs/p212_defconfig
index b6923f3..44221fc 100644
--- a/configs/p212_defconfig
+++ b/configs/p212_defconfig
@@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=8
CONFIG_PHY_MESON_GXL=y
CONFIG_DM_ETH=y
diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig
index a802e57..2752436 100644
--- a/configs/pepper_defconfig
+++ b/configs/pepper_defconfig
@@ -30,6 +30,7 @@ CONFIG_CMD_SPI=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MMC_OMAP_HS=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_NETDEVICES=y
diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
index 2451b56..76418f0 100644
--- a/configs/work_92105_defconfig
+++ b/configs/work_92105_defconfig
@@ -35,6 +35,7 @@ CONFIG_SPL_DM=y
CONFIG_DM_GPIO=y
# CONFIG_MMC is not set
CONFIG_PHYLIB=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_LPC32XX_SSP=y
diff --git a/configs/x600_defconfig b/configs/x600_defconfig
index 445759e..10d596b 100644
--- a/configs/x600_defconfig
+++ b/configs/x600_defconfig
@@ -44,6 +44,7 @@ CONFIG_FPGA_SPARTAN3=y
CONFIG_SYS_I2C_DW=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_NETDEVICES=y
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 179e041..f5821df 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -13,12 +13,20 @@ menuconfig PHYLIB
if PHYLIB
+config PHY_ADDR_ENABLE
+ bool "Limit phy address"
+ default y if ARCH_SUNXI
+ help
+ Select this if you want to control which phy address is used
+
+if PHY_ADDR_ENABLE
config PHY_ADDR
int "PHY address"
default 1 if ARCH_SUNXI
default 0
help
The address of PHY on MII bus. Usually in range of 0 to 31.
+endif
config B53_SWITCH
bool "Broadcom BCM53xx (RoboSwitch) Ethernet switch PHY support."
--
1.7.11.5
More information about the U-Boot
mailing list