[U-Boot] [PATCH v3 02/10] video: add support of MIPI DSI interface
yannick fertre
yannick.fertre at st.com
Tue Mar 13 13:50:02 UTC 2018
Mipi_display.c contains a set of dsi helpers.
This file is a copy of file drm_mipi_dsi.c (linux kernel).
Signed-off-by: yannick fertre <yannick.fertre at st.com>
---
drivers/video/Kconfig | 7 +
drivers/video/Makefile | 1 +
drivers/video/mipi_display.c | 807 +++++++++++++++++++++++++++++++++++++++++++
include/mipi_display.h | 257 +++++++++++++-
4 files changed, 1071 insertions(+), 1 deletion(-)
create mode 100644 drivers/video/mipi_display.c
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2fc0def..1981298 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -75,6 +75,13 @@ config VIDEO_ANSI
Enable ANSI escape sequence decoding for a more fully functional
console.
+config VIDEO_MIPI_DSI
+ bool "Support MIPI DSI interface"
+ depends on DM_VIDEO
+ default y if DM_VIDEO
+ help
+ Support MIPI DSI interface for driving a MIPI compatible LCD panel.
+
config CONSOLE_NORMAL
bool "Support a simple text console"
depends on DM_VIDEO
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index dfafe08..6f42cca 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_FORMIKE) += formike.o
obj-$(CONFIG_LG4573) += lg4573.o
obj-$(CONFIG_AM335X_LCD) += am335x-fb.o
obj-$(CONFIG_VIDEO_DW_HDMI) += dw_hdmi.o
+obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_display.o
obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o
obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
obj-${CONFIG_EXYNOS_FB} += exynos/
diff --git a/drivers/video/mipi_display.c b/drivers/video/mipi_display.c
new file mode 100644
index 0000000..d90ff5d
--- /dev/null
+++ b/drivers/video/mipi_display.c
@@ -0,0 +1,807 @@
+/*
+ * MIPI DSI Bus
+ *
+ * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
+ * Copyright (C) 2018 STMicroelectronics - All Rights Reserved
+ * Andrzej Hajda <a.hajda at samsung.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <display.h>
+#include <dm.h>
+#include <mipi_display.h>
+
+/**
+ * DOC: dsi helpers
+ *
+ * These functions contain some common logic and helpers to deal with MIPI DSI
+ * peripherals.
+ *
+ * Helpers are provided for a number of standard MIPI DSI command as well as a
+ * subset of the MIPI DCS command set.
+ */
+
+/**
+ * mipi_dsi_attach - attach a DSI device to its DSI host
+ * @dsi: DSI peripheral
+ */
+int mipi_dsi_attach(struct mipi_dsi_device *dsi)
+{
+ const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+
+ if (!ops || !ops->attach)
+ return -ENOSYS;
+
+ return ops->attach(dsi->host, dsi);
+}
+EXPORT_SYMBOL(mipi_dsi_attach);
+
+/**
+ * mipi_dsi_detach - detach a DSI device from its DSI host
+ * @dsi: DSI peripheral
+ */
+int mipi_dsi_detach(struct mipi_dsi_device *dsi)
+{
+ const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+
+ if (!ops || !ops->detach)
+ return -ENOSYS;
+
+ return ops->detach(dsi->host, dsi);
+}
+EXPORT_SYMBOL(mipi_dsi_detach);
+
+static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi,
+ struct mipi_dsi_msg *msg)
+{
+ const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+
+ if (!ops || !ops->transfer)
+ return -ENOSYS;
+
+ if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
+ msg->flags |= MIPI_DSI_MSG_USE_LPM;
+
+ return ops->transfer(dsi->host, msg);
+}
+
+/**
+ * mipi_dsi_packet_format_is_short - check if a packet is of the short format
+ * @type: MIPI DSI data type of the packet
+ *
+ * Return: true if the packet for the given data type is a short packet, false
+ * otherwise.
+ */
+bool mipi_dsi_packet_format_is_short(u8 type)
+{
+ switch (type) {
+ case MIPI_DSI_V_SYNC_START:
+ case MIPI_DSI_V_SYNC_END:
+ case MIPI_DSI_H_SYNC_START:
+ case MIPI_DSI_H_SYNC_END:
+ case MIPI_DSI_END_OF_TRANSMISSION:
+ case MIPI_DSI_COLOR_MODE_OFF:
+ case MIPI_DSI_COLOR_MODE_ON:
+ case MIPI_DSI_SHUTDOWN_PERIPHERAL:
+ case MIPI_DSI_TURN_ON_PERIPHERAL:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
+ case MIPI_DSI_DCS_SHORT_WRITE:
+ case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+ case MIPI_DSI_DCS_READ:
+ case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+ return true;
+ }
+
+ return false;
+}
+EXPORT_SYMBOL(mipi_dsi_packet_format_is_short);
+
+/**
+ * mipi_dsi_packet_format_is_long - check if a packet is of the long format
+ * @type: MIPI DSI data type of the packet
+ *
+ * Return: true if the packet for the given data type is a long packet, false
+ * otherwise.
+ */
+bool mipi_dsi_packet_format_is_long(u8 type)
+{
+ switch (type) {
+ case MIPI_DSI_NULL_PACKET:
+ case MIPI_DSI_BLANKING_PACKET:
+ case MIPI_DSI_GENERIC_LONG_WRITE:
+ case MIPI_DSI_DCS_LONG_WRITE:
+ case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_30:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_36:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_16:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_18:
+ case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_24:
+ return true;
+ }
+
+ return false;
+}
+EXPORT_SYMBOL(mipi_dsi_packet_format_is_long);
+
+/**
+ * mipi_dsi_create_packet - create a packet from a message according to the
+ * DSI protocol
+ * @packet: pointer to a DSI packet structure
+ * @msg: message to translate into a packet
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
+ const struct mipi_dsi_msg *msg)
+{
+ if (!packet || !msg)
+ return -EINVAL;
+
+ /* do some minimum sanity checking */
+ if (!mipi_dsi_packet_format_is_short(msg->type) &&
+ !mipi_dsi_packet_format_is_long(msg->type))
+ return -EINVAL;
+
+ if (msg->channel > 3)
+ return -EINVAL;
+
+ memset(packet, 0, sizeof(*packet));
+ packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f);
+
+ /* TODO: compute ECC if hardware support is not available */
+
+ /*
+ * Long write packets contain the word count in header bytes 1 and 2.
+ * The payload follows the header and is word count bytes long.
+ *
+ * Short write packets encode up to two parameters in header bytes 1
+ * and 2.
+ */
+ if (mipi_dsi_packet_format_is_long(msg->type)) {
+ packet->header[1] = (msg->tx_len >> 0) & 0xff;
+ packet->header[2] = (msg->tx_len >> 8) & 0xff;
+
+ packet->payload_length = msg->tx_len;
+ packet->payload = msg->tx_buf;
+ } else {
+ const u8 *tx = msg->tx_buf;
+
+ packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0;
+ packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0;
+ }
+
+ packet->size = sizeof(packet->header) + packet->payload_length;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_create_packet);
+
+/*
+ * mipi_dsi_set_maximum_return_packet_size() - specify the maximum size of the
+ * the payload in a long packet transmitted from the peripheral back to the
+ * host processor
+ * @dsi: DSI peripheral device
+ * @value: the maximum size of the payload
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
+ u16 value)
+{
+ u8 tx[2] = { value & 0xff, value >> 8 };
+ struct mipi_dsi_msg msg = {
+ .channel = dsi->channel,
+ .type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
+ .tx_len = sizeof(tx),
+ .tx_buf = tx,
+ };
+ int ret = mipi_dsi_device_transfer(dsi, &msg);
+
+ return (ret < 0) ? ret : 0;
+}
+EXPORT_SYMBOL(mipi_dsi_set_maximum_return_packet_size);
+
+/**
+ * mipi_dsi_generic_write() - transmit data using a generic write packet
+ * @dsi: DSI peripheral device
+ * @payload: buffer containing the payload
+ * @size: size of payload buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the payload length.
+ *
+ * Return: The number of bytes transmitted on success or a negative error code
+ * on failure.
+ */
+ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
+ size_t size)
+{
+ struct mipi_dsi_msg msg = {
+ .channel = dsi->channel,
+ .tx_buf = payload,
+ .tx_len = size
+ };
+
+ switch (size) {
+ case 0:
+ msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM;
+ break;
+
+ case 1:
+ msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM;
+ break;
+
+ case 2:
+ msg.type = MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM;
+ break;
+
+ default:
+ msg.type = MIPI_DSI_GENERIC_LONG_WRITE;
+ break;
+ }
+
+ return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_generic_write);
+
+/**
+ * mipi_dsi_generic_read() - receive data using a generic read packet
+ * @dsi: DSI peripheral device
+ * @params: buffer containing the request parameters
+ * @num_params: number of request parameters
+ * @data: buffer in which to return the received data
+ * @size: size of receive buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the number of parameters passed in.
+ *
+ * Return: The number of bytes successfully read or a negative error code on
+ * failure.
+ */
+ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
+ size_t num_params, void *data, size_t size)
+{
+ struct mipi_dsi_msg msg = {
+ .channel = dsi->channel,
+ .tx_len = num_params,
+ .tx_buf = params,
+ .rx_len = size,
+ .rx_buf = data
+ };
+
+ switch (num_params) {
+ case 0:
+ msg.type = MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM;
+ break;
+
+ case 1:
+ msg.type = MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM;
+ break;
+
+ case 2:
+ msg.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_generic_read);
+
+/**
+ * mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
+ * @dsi: DSI peripheral device
+ * @data: buffer containing data to be transmitted
+ * @len: size of transmission buffer
+ *
+ * This function will automatically choose the right data type depending on
+ * the command payload length.
+ *
+ * Return: The number of bytes successfully transmitted or a negative error
+ * code on failure.
+ */
+ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
+ const void *data, size_t len)
+{
+ struct mipi_dsi_msg msg = {
+ .channel = dsi->channel,
+ .tx_buf = data,
+ .tx_len = len
+ };
+
+ switch (len) {
+ case 0:
+ return -EINVAL;
+
+ case 1:
+ msg.type = MIPI_DSI_DCS_SHORT_WRITE;
+ break;
+
+ case 2:
+ msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
+ break;
+
+ default:
+ msg.type = MIPI_DSI_DCS_LONG_WRITE;
+ break;
+ }
+
+ return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer);
+
+/**
+ * mipi_dsi_dcs_write() - send DCS write command
+ * @dsi: DSI peripheral device
+ * @cmd: DCS command
+ * @data: buffer containing the command payload
+ * @len: command payload length
+ *
+ * This function will automatically choose the right data type depending on
+ * the command payload length.
+ *
+ * Return: The number of bytes successfully transmitted or a negative error
+ * code on failure.
+ */
+ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
+ const void *data, size_t len)
+{
+ ssize_t err;
+ size_t size;
+ u8 *tx;
+
+ if (len > 0) {
+ size = 1 + len;
+
+ tx = kmalloc(size, GFP_KERNEL);
+ if (!tx)
+ return -ENOMEM;
+
+ /* concatenate the DCS command byte and the payload */
+ tx[0] = cmd;
+ memcpy(&tx[1], data, len);
+ } else {
+ tx = &cmd;
+ size = 1;
+ }
+
+ err = mipi_dsi_dcs_write_buffer(dsi, tx, size);
+
+ if (len > 0)
+ kfree(tx);
+
+ return err;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_write);
+
+/**
+ * mipi_dsi_dcs_read() - send DCS read request command
+ * @dsi: DSI peripheral device
+ * @cmd: DCS command
+ * @data: buffer in which to receive data
+ * @len: size of receive buffer
+ *
+ * Return: The number of bytes read or a negative error code on failure.
+ */
+ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
+ size_t len)
+{
+ struct mipi_dsi_msg msg = {
+ .channel = dsi->channel,
+ .type = MIPI_DSI_DCS_READ,
+ .tx_buf = &cmd,
+ .tx_len = 1,
+ .rx_buf = data,
+ .rx_len = len
+ };
+
+ return mipi_dsi_device_transfer(dsi, &msg);
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_read);
+
+/**
+ * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
+ * given pixel format defined by the MIPI DSI
+ * specification
+ * @fmt: MIPI DSI pixel format
+ *
+ * Returns: The number of bits per pixel of the given pixel format.
+ */
+int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
+{
+ switch (fmt) {
+ case MIPI_DSI_FMT_RGB888:
+ case MIPI_DSI_FMT_RGB666:
+ return 24;
+
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ return 18;
+
+ case MIPI_DSI_FMT_RGB565:
+ return 16;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(mipi_dsi_pixel_format_to_bpp);
+
+/**
+ * mipi_dsi_dcs_nop() - send DCS nop packet
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_NOP, NULL, 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_nop);
+
+/**
+ * mipi_dsi_dcs_soft_reset() - perform a software reset of the display module
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SOFT_RESET, NULL, 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_soft_reset);
+
+/**
+ * mipi_dsi_dcs_get_power_mode() - query the display module's current power
+ * mode
+ * @dsi: DSI peripheral device
+ * @mode: return location for the current power mode
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_POWER_MODE, mode,
+ sizeof(*mode));
+ if (err <= 0) {
+ if (err == 0)
+ err = -ENODATA;
+
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_power_mode);
+
+/**
+ * mipi_dsi_dcs_get_pixel_format() - gets the pixel format for the RGB image
+ * data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: return location for the pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_PIXEL_FORMAT, format,
+ sizeof(*format));
+ if (err <= 0) {
+ if (err == 0)
+ err = -ENODATA;
+
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_pixel_format);
+
+/**
+ * mipi_dsi_dcs_enter_sleep_mode() - disable all unnecessary blocks inside the
+ * display module except interface communication
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_enter_sleep_mode);
+
+/**
+ * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display
+ * module
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_exit_sleep_mode);
+
+/**
+ * mipi_dsi_dcs_set_display_off() - stop displaying the image data on the
+ * display device
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_off);
+
+/**
+ * mipi_dsi_dcs_set_display_on() - start displaying the image data on the
+ * display device
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_on);
+
+/**
+ * mipi_dsi_dcs_set_column_address() - define the column extent of the frame
+ * memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first column of frame memory
+ * @end: last column of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+ u16 end)
+{
+ u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, payload,
+ sizeof(payload));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_column_address);
+
+/**
+ * mipi_dsi_dcs_set_page_address() - define the page extent of the frame
+ * memory accessed by the host processor
+ * @dsi: DSI peripheral device
+ * @start: first page of frame memory
+ * @end: last page of frame memory
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+ u16 end)
+{
+ u8 payload[4] = { start >> 8, start & 0xff, end >> 8, end & 0xff };
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PAGE_ADDRESS, payload,
+ sizeof(payload));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_page_address);
+
+/**
+ * mipi_dsi_dcs_set_tear_off() - turn off the display module's Tearing Effect
+ * output signal on the TE signal line
+ * @dsi: DSI peripheral device
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_OFF, NULL, 0);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_off);
+
+/**
+ * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect
+ * output signal on the TE signal line.
+ * @dsi: DSI peripheral device
+ * @mode: the Tearing Effect Output Line mode
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
+ enum mipi_dsi_dcs_tear_mode mode)
+{
+ u8 value = mode;
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_TEAR_ON, &value,
+ sizeof(value));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
+
+/**
+ * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
+ * data used by the interface
+ * @dsi: DSI peripheral device
+ * @format: pixel format
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
+ sizeof(format));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
+
+/**
+ * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
+ * the Tearing Effect output signal of the display module
+ * @dsi: DSI peripheral device
+ * @scanline: scanline to use as trigger
+ *
+ * Return: 0 on success or a negative error code on failure
+ */
+int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
+{
+ u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8,
+ scanline & 0xff };
+ ssize_t err;
+
+ err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
+
+/**
+ * mipi_dsi_dcs_set_display_brightness() - sets the brightness value of the
+ * display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
+ u16 brightness)
+{
+ u8 payload[2] = { brightness & 0xff, brightness >> 8 };
+ ssize_t err;
+
+ err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
+ payload, sizeof(payload));
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_set_display_brightness);
+
+/**
+ * mipi_dsi_dcs_get_display_brightness() - gets the current brightness value
+ * of the display
+ * @dsi: DSI peripheral device
+ * @brightness: brightness value
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
+ u16 *brightness)
+{
+ ssize_t err;
+
+ err = mipi_dsi_dcs_read(dsi, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
+ brightness, sizeof(*brightness));
+ if (err <= 0) {
+ if (err == 0)
+ err = -ENODATA;
+
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(mipi_dsi_dcs_get_display_brightness);
+
+MODULE_AUTHOR("Andrzej Hajda <a.hajda at samsung.com>");
+MODULE_AUTHOR("Yannick Fertre <yannick.fertre at st.com>");
+MODULE_DESCRIPTION("MIPI DSI Bus");
+MODULE_LICENSE("GPL and additional rights");
diff --git a/include/mipi_display.h b/include/mipi_display.h
index ddcc8ca..8f9d4a4 100644
--- a/include/mipi_display.h
+++ b/include/mipi_display.h
@@ -4,12 +4,16 @@
*
* Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski at gmx.de>
* Copyright (C) 2006 Nokia Corporation
- * Author: Imre Deak <imre.deak at nokia.com>
+ * Copyright (C) 2018 STMicroelectronics - All Rights Reserved
+ * Author(s): Imre Deak <imre.deak at nokia.com>
+ * Yannick Fertre <yannick.fertre at st.com>
+ * Philippe Cornu <philippe.cornu at st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
#ifndef MIPI_DISPLAY_H
#define MIPI_DISPLAY_H
@@ -115,6 +119,14 @@ enum {
MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E,
MIPI_DCS_SET_TEAR_SCANLINE = 0x44,
MIPI_DCS_GET_SCANLINE = 0x45,
+ MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51, /* MIPI DCS 1.3 */
+ MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52, /* MIPI DCS 1.3 */
+ MIPI_DCS_WRITE_CONTROL_DISPLAY = 0x53, /* MIPI DCS 1.3 */
+ MIPI_DCS_GET_CONTROL_DISPLAY = 0x54, /* MIPI DCS 1.3 */
+ MIPI_DCS_WRITE_POWER_SAVE = 0x55, /* MIPI DCS 1.3 */
+ MIPI_DCS_GET_POWER_SAVE = 0x56, /* MIPI DCS 1.3 */
+ MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E, /* MIPI DCS 1.3 */
+ MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F, /* MIPI DCS 1.3 */
MIPI_DCS_READ_DDB_START = 0xA1,
MIPI_DCS_READ_DDB_CONTINUE = 0xA8,
};
@@ -127,4 +139,247 @@ enum {
#define MIPI_DCS_PIXEL_FMT_8BIT 2
#define MIPI_DCS_PIXEL_FMT_3BIT 1
+struct mipi_dsi_host;
+struct mipi_dsi_device;
+
+/* request ACK from peripheral */
+#define MIPI_DSI_MSG_REQ_ACK BIT(0)
+/* use Low Power Mode to transmit message */
+#define MIPI_DSI_MSG_USE_LPM BIT(1)
+
+/**
+ * struct mipi_dsi_msg - read/write DSI buffer
+ * @channel: virtual channel id
+ * @type: payload data type
+ * @flags: flags controlling this message transmission
+ * @tx_len: length of @tx_buf
+ * @tx_buf: data to be written
+ * @rx_len: length of @rx_buf
+ * @rx_buf: data to be read, or NULL
+ */
+struct mipi_dsi_msg {
+ u8 channel;
+ u8 type;
+ u16 flags;
+
+ size_t tx_len;
+ const void *tx_buf;
+
+ size_t rx_len;
+ void *rx_buf;
+};
+
+bool mipi_dsi_packet_format_is_short(u8 type);
+bool mipi_dsi_packet_format_is_long(u8 type);
+
+/**
+ * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
+ * @size: size (in bytes) of the packet
+ * @header: the four bytes that make up the header (Data ID, Word Count or
+ * Packet Data, and ECC)
+ * @payload_length: number of bytes in the payload
+ * @payload: a pointer to a buffer containing the payload, if any
+ */
+struct mipi_dsi_packet {
+ size_t size;
+ u8 header[4];
+ size_t payload_length;
+ const u8 *payload;
+};
+
+int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
+ const struct mipi_dsi_msg *msg);
+
+/**
+ * struct mipi_dsi_host_ops - DSI bus operations
+ * @attach: attach DSI device to DSI host
+ * @detach: detach DSI device from DSI host
+ * @transfer: transmit a DSI packet
+ *
+ * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
+ * structures. This structure contains information about the type of packet
+ * being transmitted as well as the transmit and receive buffers. When an
+ * error is encountered during transmission, this function will return a
+ * negative error code. On success it shall return the number of bytes
+ * transmitted for write packets or the number of bytes received for read
+ * packets.
+ *
+ * Note that typically DSI packet transmission is atomic, so the .transfer()
+ * function will seldomly return anything other than the number of bytes
+ * contained in the transmit buffer on success.
+ */
+struct mipi_dsi_host_ops {
+ int (*attach)(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *dsi);
+ int (*detach)(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *dsi);
+ ssize_t (*transfer)(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg);
+};
+
+/**
+ * struct mipi_dsi_host - DSI host device
+ * @dev: driver model device node for this DSI host
+ * @ops: DSI host operations
+ * @list: list management
+ */
+struct mipi_dsi_host {
+ struct device *dev;
+ const struct mipi_dsi_host_ops *ops;
+ struct list_head list;
+};
+
+/* DSI mode flags */
+
+/* video mode */
+#define MIPI_DSI_MODE_VIDEO BIT(0)
+/* video burst mode */
+#define MIPI_DSI_MODE_VIDEO_BURST BIT(1)
+/* video pulse mode */
+#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2)
+/* enable auto vertical count mode */
+#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3)
+/* enable hsync-end packets in vsync-pulse and v-porch area */
+#define MIPI_DSI_MODE_VIDEO_HSE BIT(4)
+/* disable hfront-porch area */
+#define MIPI_DSI_MODE_VIDEO_HFP BIT(5)
+/* disable hback-porch area */
+#define MIPI_DSI_MODE_VIDEO_HBP BIT(6)
+/* disable hsync-active area */
+#define MIPI_DSI_MODE_VIDEO_HSA BIT(7)
+/* flush display FIFO on vsync pulse */
+#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8)
+/* disable EoT packets in HS mode */
+#define MIPI_DSI_MODE_EOT_PACKET BIT(9)
+/* device supports non-continuous clock behavior (DSI spec 5.6.1) */
+#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10)
+/* transmit data in low power */
+#define MIPI_DSI_MODE_LPM BIT(11)
+
+enum mipi_dsi_pixel_format {
+ MIPI_DSI_FMT_RGB888,
+ MIPI_DSI_FMT_RGB666,
+ MIPI_DSI_FMT_RGB666_PACKED,
+ MIPI_DSI_FMT_RGB565,
+};
+
+#define DSI_DEV_NAME_SIZE 20
+
+/**
+ * struct mipi_dsi_device_info - template for creating a mipi_dsi_device
+ * @type: DSI peripheral chip type
+ * @channel: DSI virtual channel assigned to peripheral
+ * @node: pointer to OF device node or NULL
+ *
+ * This is populated and passed to mipi_dsi_device_new to create a new
+ * DSI device
+ */
+struct mipi_dsi_device_info {
+ char type[DSI_DEV_NAME_SIZE];
+ u32 channel;
+ struct device_node *node;
+};
+
+/**
+ * struct mipi_dsi_device - DSI peripheral device
+ * @host: DSI host for this peripheral
+ * @dev: driver model device node for this peripheral
+ * @name: DSI peripheral chip type
+ * @channel: virtual channel assigned to the peripheral
+ * @format: pixel format for video mode
+ * @lanes: number of active data lanes
+ * @mode_flags: DSI operation mode related flags
+ */
+struct mipi_dsi_device {
+ struct mipi_dsi_host *host;
+ struct udevice *dev;
+
+ char name[DSI_DEV_NAME_SIZE];
+ unsigned int channel;
+ unsigned int lanes;
+ enum mipi_dsi_pixel_format format;
+ unsigned long mode_flags;
+};
+
+/**
+ * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
+ * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
+ * information only
+ * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
+ * V-Blanking and H-Blanking information
+ */
+enum mipi_dsi_dcs_tear_mode {
+ MIPI_DSI_DCS_TEAR_MODE_VBLANK,
+ MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
+};
+
+/**
+ * struct mipi_dsi_panel_plat - DSI panel platform data
+ * @device: DSI peripheral device
+ */
+struct mipi_dsi_panel_plat {
+ struct mipi_dsi_device *device;
+};
+
+int mipi_dsi_attach(struct mipi_dsi_device *dsi);
+int mipi_dsi_detach(struct mipi_dsi_device *dsi);
+int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt);
+
+/* bit compatible with the xrandr RR_ definitions (bits 0-13)
+ *
+ * ABI warning: Existing userspace really expects
+ * the mode flags to match the xrandr definitions. Any
+ * changes that don't match the xrandr definitions will
+ * likely need a new client cap or some other mechanism
+ * to avoid breaking existing userspace. This includes
+ * allocating new flags in the previously unused bits!
+ */
+#define MIPI_DSI_FLAG_PHSYNC BIT(0)
+#define MIPI_DSI_FLAG_NHSYNC BIT(1)
+#define MIPI_DSI_FLAG_PVSYNC BIT(2)
+#define MIPI_DSI_FLAG_NVSYNC BIT(3)
+#define MIPI_DSI_FLAG_INTERLACE BIT(4)
+#define MIPI_DSI_FLAG_DBLSCAN BIT(5)
+#define MIPI_DSI_FLAG_CSYNC BIT(6)
+#define MIPI_DSI_FLAG_PCSYNC BIT(7)
+#define MIPI_DSI_FLAG_NCSYNC BIT(8)
+#define MIPI_DSI_FLAG_HSKEW BIT(9) /* hskew provided */
+#define MIPI_DSI_FLAG_BCAST BIT(10)
+#define MIPI_DSI_FLAG_PIXMUX BIT(11)
+#define MIPI_DSI_FLAG_DBLCLK BIT(12)
+#define MIPI_DSI_FLAG_CLKDIV2 BIT(13)
+
+/* request ACK from peripheral */
+#define MIPI_DSI_MSG_REQ_ACK BIT(0)
+/* use Low Power Mode to transmit message */
+#define MIPI_DSI_MSG_USE_LPM BIT(1)
+
+ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
+ const void *data, size_t len);
+ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
+ const void *data, size_t len);
+ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
+ size_t len);
+int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
+int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
+int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
+ u16 end);
+int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
+ u16 end);
+int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
+int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
+ enum mipi_dsi_dcs_tear_mode mode);
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
+int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
+int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
+ u16 brightness);
+int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
+ u16 *brightness);
+
#endif
--
1.9.1
More information about the U-Boot
mailing list