[U-Boot] [PATCH v4 02/13] armv8: fsl-layerscape: Add support of GPIO structure

[Calvin Johnson]

From: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>

Layerscape Gen2 SoC supports GPIO registers to control GPIO
signals. Adding support of GPIO structure to access GPIO
registers.

Signed-off-by: Pratiyush Srivastava <pratiyush.srivastava at nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson at nxp.com>
Acked-by: Joe Hershberger <joe.hershberger at ni.com>

---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 1ff5cac..b195005 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -82,6 +82,11 @@
 #define QSPI0_BASE_ADDR				(CONFIG_SYS_IMMR + 0x00550000)
 #define DSPI1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01100000)
 
+#define GPIO1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1300000)
+#define GPIO2_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1310000)
+#define GPIO3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1320000)
+#define GPIO4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x1330000)
+
 #define LPUART_BASE				(CONFIG_SYS_IMMR + 0x01950000)
 
 #define AHCI_BASE_ADDR				(CONFIG_SYS_IMMR + 0x02200000)
@@ -591,6 +596,16 @@ struct ccsr_serdes {
 	u8	res_19a0[0x2000-0x19a0];	/* from 0x19a0 to 0x1fff */
 };
 
+struct ccsr_gpio {
+	u32	gpdir;
+	u32	gpodr;
+	u32	gpdat;
+	u32	gpier;
+	u32	gpimr;
+	u32	gpicr;
+	u32	gpibe;
+};
+
 /* MMU 500 */
 #define SMMU_SCR0			(SMMU_BASE + 0x0)
 #define SMMU_SCR1			(SMMU_BASE + 0x4)
-- 
2.7.4