[U-Boot] [PATCH v3] imximage: Remove failure when no IVT offset is found

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

Sometimes imximage throws the following error:

  CFGS    board/freescale/vf610twr/imximage.cfg.cfgtmp
  CFGS    board/freescale/vf610twr/imximage.cfg.cfgtmp
  MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/vf610twr/imximage.cfg.cfgtmp
arch/arm/mach-imx/Makefile:100: recipe for target 'u-boot-dtb.imx' failed

Later on, when running mkimage for the u-boot.imx it will succeed in
finding the IVT offset.

Looks like some race condition happening during parallel build when
processing mkimage for u-boot-dtb.imx and u-boot.imx.

A proper fix still needs to be implemented, but as a workaround let's
remove the error when the IVT offset is not found.

It is useful to have such message, especially during bring-up phase,
but the build error that it causes is severe, so better avoid the
build error for now.

The error checking can be re-implemented later when we have a proper
fix.

Reported-by: Breno Lima <breno.lima at nxp.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
Changes since v2:
- Use my NXP address in the From field.

 tools/imximage.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/tools/imximage.c b/tools/imximage.c
index eb7e682..ed9d935 100644
--- a/tools/imximage.c
+++ b/tools/imximage.c
@@ -777,11 +777,6 @@ static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name)
 	(*set_dcd_rst)(imxhdr, dcd_len, name, lineno);
 	fclose(fd);
 
-	/* Exit if there is no BOOT_FROM field specifying the flash_offset */
-	if (imximage_ivt_offset == FLASH_OFFSET_UNDEFINED) {
-		fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name);
-		exit(EXIT_FAILURE);
-	}
 	return dcd_len;
 }
 
-- 
2.7.4