[U-Boot] [PATCH RFC 0/2] sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well

André Przywara andre.przywara at arm.com
Wed Mar 7 02:21:07 UTC 2018


Hi,

On 06/03/18 21:38, Tuomas Tynkkynen wrote:
> For some reason we seem to have documented how to build
> u-boot-sunxi-with-spl.bin manually with cat but not have a build system
> rule for it. Let's fix this to have the file built by default just like
> it is on 32-bit sunxi boards.

Ah, thanks a lot! Admittedly I was just too lazy to find out how this
works for the 32-bit boards, and how to pull this into the 64 bit builds
as well.

> Build-tested only.

I actually booted from an SD card and it works like a charm!
So thanks again for pulling this together.

Cheers,
Andre.

> 
> Tuomas Tynkkynen (2):
>   ARM: sunxi: Move u-boot-sunxi-with-spl.bin rule to Makefile
>   ARM: sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well
> 
>  Makefile                           | 10 ++++++++++
>  arch/arm/cpu/armv7/sunxi/config.mk |  6 ------
>  board/sunxi/README.sunxi64         |  3 +--
>  3 files changed, 11 insertions(+), 8 deletions(-)
>  delete mode 100644 arch/arm/cpu/armv7/sunxi/config.mk
> 



More information about the U-Boot mailing list