[U-Boot] [PATCH u-boot 1/3] usb: host: Add simple of glue driver for DWC3 USB Controllers integration

[Marek Vasut]

On 03/29/2018 03:42 PM, Neil Armstrong wrote:
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  drivers/usb/host/Kconfig          |   7 ++
>  drivers/usb/host/Makefile         |   1 +
>  drivers/usb/host/dwc3-of-simple.c | 187 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 195 insertions(+)
>  create mode 100644 drivers/usb/host/dwc3-of-simple.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index a7249b7..6caa615 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -21,6 +21,13 @@ config USB_XHCI_DWC3
>  	  Say Y or if your system has a Dual Role SuperSpeed
>  	  USB controller based on the DesignWare USB3 IP Core.
>  
> +config USB_XHCI_DWC3_OF_SIMPLE
> +	bool "DesignWare USB3 DRD Generic OF Simple Glue Layer"
> +	select MISC
> +	help
> +	  Support USB2/3 functionality in simple SoC integrations with
> +	  USB controller based on the DesignWare USB3 IP Core.
> +
>  config USB_XHCI_MVEBU
>  	bool "MVEBU USB 3.0 support"
>  	default y
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 9819489..abe4f90 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
>  # xhci
>  obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o
>  obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
> +obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
>  obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
>  obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o
>  obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o
> diff --git a/drivers/usb/host/dwc3-of-simple.c b/drivers/usb/host/dwc3-of-simple.c
> new file mode 100644
> index 0000000..826a996
> --- /dev/null
> +++ b/drivers/usb/host/dwc3-of-simple.c
> @@ -0,0 +1,187 @@
> +/*
> + * dwc3-of-simple.c - OF glue layer for simple integrations
> + *
> + * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com
> + *
> + * Author: Felipe Balbi <balbi at ti.com>
> + *
> + * Copyright (C) 2018 BayLibre, SAS
> + * Author: Neil Armstrong <narmstron at baylibre.com>
> + *
> + * SPDX-License-Identifier:     GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <fdtdec.h>
> +#include <reset.h>
> +#include <clk.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct dwc3_of_simple {
> +#if CONFIG_IS_ENABLED(CLK)
> +	struct clk		*clks;
> +	int			num_clocks;
> +#endif
> +#if CONFIG_IS_ENABLED(DM_RESET)
> +	struct reset_ctl	*resets;
> +	int			num_resets;
> +#endif
> +};
> +
> +#if CONFIG_IS_ENABLED(DM_RESET)
> +static int dwc3_of_simple_reset_init(struct udevice *dev,
> +				     struct dwc3_of_simple *simple,
> +				     int count)
> +{
> +	int i, ret, err;
> +
> +	if (!count)
> +		return 0;
> +
> +	simple->resets = devm_kcalloc(dev, count, sizeof(struct reset_ctl),
> +				      GFP_KERNEL);
> +	if (!simple->resets)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < count; i++) {
> +		ret = reset_get_by_index(dev, i, &simple->resets[i]);
> +		if (ret < 0)
> +			break;
> +
> +		ret = reset_request(&simple->resets[i]);
> +		if (ret) {
> +			pr_err("failed to request reset line %d\n", i);
> +			reset_free(&simple->resets[i]);
> +			goto reset_err;
> +		}
> +
> +		
> +		++simple->num_resets;
> +	}
> +
> +	for (i = 0; i < simple->num_resets; i++) {
> +		ret = reset_deassert(&simple->resets[i]);
> +		if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
> +			pr_err("failed to deassert reset line %d\n", i);
> +			goto reset_err;
> +		}
> +	}
> +
> +	return 0;

This looks like some driver I've seen before. Isn't there similar code
for simple EHCI or OHCI driver already ?

-- 
Best regards,
Marek Vasut