[U-Boot] [PATCH 1/4] arm64: zynqmp: Enable booting to ATF

[Michal Simek]

From: Luca Ceresoli <luca at lucaceresoli.net>

U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2). This has been tested on zcu106, so
enable it in this defconfig.

To generate an image that triggers this booting flow, you need to pass
'-O arm-trusted-firmware' to mkimage.

Signed-off-by: Luca Ceresoli <luca at lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 +
 configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig | 1 +
 configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 1 +
 configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 1 +
 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig    | 1 +
 configs/xilinx_zynqmp_zcu102_revA_defconfig      | 1 +
 configs/xilinx_zynqmp_zcu102_revB_defconfig      | 1 +
 7 files changed, 7 insertions(+)

diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
index 1125ebda8a9f..208e3e97c0a2 100644
--- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_FLASH=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
index 8fc13ef0ecc4..392efbb4156b 100644
--- a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
@@ -19,6 +19,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_FLASH=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
index 0a057bf3fefd..456916b57288 100644
--- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
@@ -15,6 +15,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
index 47edf519f953..3dca21dc1650 100644
--- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
@@ -16,6 +16,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
index cb3e2f5ca9f2..58c404e332fa 100644
--- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_FLASH=y
diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig
index 19b9683f023b..90ac04825450 100644
--- a/configs/xilinx_zynqmp_zcu102_revA_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_FLASH=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
index b660200508f9..3a9d011cf3f6 100644
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@@ -18,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_FLASH=y
-- 
1.9.1