[U-Boot] davinci: omapl138_lcdk: fix PLL0 frequency

[Tom Rini]

On Wed, Mar 14, 2018 at 08:36:30PM -0500, David Lechner wrote:

> commit 1601dd97edc6 ("davinci: omapl138_lcdk: increase PLL0 frequency")
> changed the PLL0 frequency to 456MHz, which is needed for the LCDC IP
> block. However, in doing so, it caused the PLLOUT clock to be outside
> of the allowable specifications given in the OMAP-L138 data sheet. (It
> says PLLOUT must be 600MHz max). It also uses a PLLM value outside of
> the range given in the TRM (it says PLLM must in the range 0 to 0x1f).
> 
> So here is what we have currently:
> 
> PLLOUT = 24 / (0 + 1) * (37 + 1) = 912MHz (out of spec)
>          ^     ^         ^
>        CLKIN PREDIV    PLLM (out of spec)
> 
> input to PLLDIVn = 912 / (1 + 1) = 456MHz (desired result)
>                     ^     ^
>                  PLLOUT POSTDIV
> 
> This changes the PLLM value to 18 and the POSTDIV value to 0 so that
> PLLOUT is now within specification but we still get the desired
> result.
> 
> PLLOUT = 24 / (0 + 1) * (18 + 1) = 456MHz (within spec)
>          ^     ^         ^
>        CLKIN PREDIV     PLLM
> 
> input to PLLDIVn = 456 / (0 + 1) = 456MHz (desired result)
>                     ^     ^
>                  PLLOUT POSTDIV
> 
> Fixes: 1601dd97edc6 ("davinci: omapl138_lcdk: increase PLL0 frequency")
> Signed-off-by: David Lechner <david at lechnology.com>
> Reported-by: Sekhar Nori <nsekhar at ti.com>
> Tested-by: Sekhar Nori <nsekhar at ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180322/74182e42/attachment.sig>