[U-Boot] [PATCH 3/5] net: fec: set dev->seq to priv->dev_id

[Peng Fan]

To platforms has two enet interface, using dev->seq could
avoid conflict.

i.MX6UL/ULL evk board net get the wrong MAC address from fuse,
eth1 get MAC0 address, eth0 get MAC1 address from fuse. Set the
priv->dev_id to device->seq as the real net interface alias id then
.fec_get_hwaddr() read the related MAC address from fuse.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/net/fec_mxc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 2bd4ba4ef1..2c3171ecc9 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1252,7 +1252,6 @@ static int fecmxc_probe(struct udevice *dev)
 	struct eth_pdata *pdata = dev_get_platdata(dev);
 	struct fec_priv *priv = dev_get_priv(dev);
 	struct mii_dev *bus = NULL;
-	int dev_id = -1;
 	uint32_t start;
 	int ret;
 
@@ -1273,9 +1272,9 @@ static int fecmxc_probe(struct udevice *dev)
 	}
 
 	fec_reg_setup(priv);
-	priv->dev_id = (dev_id == -1) ? 0 : dev_id;
 
-	bus = fec_get_miibus((ulong)priv->eth, dev_id);
+	priv->dev_id = dev->seq;
+	bus = fec_get_miibus((ulong)priv->eth, dev->seq);
 	if (!bus) {
 		ret = -ENOMEM;
 		goto err_mii;
-- 
2.14.1