[U-Boot] [PATCH v2 04/10] video: add support of panel OTM8009A
Patrice CHOTARD
patrice.chotard at st.com
Tue Mar 13 08:52:09 UTC 2018
Hi Yannick
On 03/02/2018 04:44 PM, yannick fertre wrote:
> Support for Orise Tech otm8009a 480p dsi 2dl video mode panel.
>
> Signed-off-by: yannick fertre <yannick.fertre at st.com>
> ---
> drivers/video/Kconfig | 8 +
> drivers/video/Makefile | 1 +
> drivers/video/orisetech_otm8009a.c | 329 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 338 insertions(+)
> create mode 100644 drivers/video/orisetech_otm8009a.c
>
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 1981298..b5fc535 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -320,6 +320,14 @@ config VIDEO_LCD_ANX9804
> from a parallel LCD interface and translate it on the fy into a DP
> interface for driving eDP TFT displays. It uses I2C for configuration.
>
> +config VIDEO_LCD_ORISETECH_OTM8009A
> + bool "OTM8009A DSI LCD panel support"
> + depends on DM_VIDEO
> + select VIDEO_MIPI_DSI
> + default n
> + ---help---
> + Support for Orise Tech otm8009a 480p dsi 2dl video mode panel.
> +
> config VIDEO_LCD_SSD2828
> bool "SSD2828 bridge chip"
> default n
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index 6f42cca..65002af 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o
> obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
> obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
> obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
> +obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
> obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
> obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
> obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
> diff --git a/drivers/video/orisetech_otm8009a.c b/drivers/video/orisetech_otm8009a.c
> new file mode 100644
> index 0000000..79f2da8
> --- /dev/null
> +++ b/drivers/video/orisetech_otm8009a.c
> @@ -0,0 +1,329 @@
> +/*
> + * Copyright (C) 2018 STMicroelectronics - All Rights Reserved
> + * Author(s): Yannick Fertre <yannick.fertre at st.com> for STMicroelectronics.
> + * Philippe Cornu <philippe.cornu at st.com> for STMicroelectronics.
> + *
> + * This otm8009a panel driver is based on the panel driver from
> + * drivers/gpu/drm/panel/panel-orisetech-otm8009a.c (kernel linux)
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +#include <asm/gpio.h>
> +#include <backlight.h>
> +#include <common.h>
> +#include <dm.h>
> +#include <panel.h>
> +#include <power/regulator.h>
> +#include <mipi_display.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define DRV_NAME "orisetech_otm8009a"
> +
> +#define OTM8009A_BACKLIGHT_DEFAULT 240
> +#define OTM8009A_BACKLIGHT_MAX 255
> +
> +/* Manufacturer Command Set */
> +#define MCS_ADRSFT 0x0000 /* Address Shift Function */
> +#define MCS_PANSET 0xB3A6 /* Panel Type Setting */
> +#define MCS_SD_CTRL 0xC0A2 /* Source Driver Timing Setting */
> +#define MCS_P_DRV_M 0xC0B4 /* Panel Driving Mode */
> +#define MCS_OSC_ADJ 0xC181 /* Oscillator Adjustment for Idle/Normal mode */
> +#define MCS_RGB_VID_SET 0xC1A1 /* RGB Video Mode Setting */
> +#define MCS_SD_PCH_CTRL 0xC480 /* Source Driver Precharge Control */
> +#define MCS_NO_DOC1 0xC48A /* Command not documented */
> +#define MCS_PWR_CTRL1 0xC580 /* Power Control Setting 1 */
> +#define MCS_PWR_CTRL2 0xC590 /* Power Control Setting 2 for Normal Mode */
> +#define MCS_PWR_CTRL4 0xC5B0 /* Power Control Setting 4 for DC Voltage */
> +#define MCS_PANCTRLSET1 0xCB80 /* Panel Control Setting 1 */
> +#define MCS_PANCTRLSET2 0xCB90 /* Panel Control Setting 2 */
> +#define MCS_PANCTRLSET3 0xCBA0 /* Panel Control Setting 3 */
> +#define MCS_PANCTRLSET4 0xCBB0 /* Panel Control Setting 4 */
> +#define MCS_PANCTRLSET5 0xCBC0 /* Panel Control Setting 5 */
> +#define MCS_PANCTRLSET6 0xCBD0 /* Panel Control Setting 6 */
> +#define MCS_PANCTRLSET7 0xCBE0 /* Panel Control Setting 7 */
> +#define MCS_PANCTRLSET8 0xCBF0 /* Panel Control Setting 8 */
> +#define MCS_PANU2D1 0xCC80 /* Panel U2D Setting 1 */
> +#define MCS_PANU2D2 0xCC90 /* Panel U2D Setting 2 */
> +#define MCS_PANU2D3 0xCCA0 /* Panel U2D Setting 3 */
> +#define MCS_PAND2U1 0xCCB0 /* Panel D2U Setting 1 */
> +#define MCS_PAND2U2 0xCCC0 /* Panel D2U Setting 2 */
> +#define MCS_PAND2U3 0xCCD0 /* Panel D2U Setting 3 */
> +#define MCS_GOAVST 0xCE80 /* GOA VST Setting */
> +#define MCS_GOACLKA1 0xCEA0 /* GOA CLKA1 Setting */
> +#define MCS_GOACLKA3 0xCEB0 /* GOA CLKA3 Setting */
> +#define MCS_GOAECLK 0xCFC0 /* GOA ECLK Setting */
> +#define MCS_NO_DOC2 0xCFD0 /* Command not documented */
> +#define MCS_GVDDSET 0xD800 /* GVDD/NGVDD */
> +#define MCS_VCOMDC 0xD900 /* VCOM Voltage Setting */
> +#define MCS_GMCT2_2P 0xE100 /* Gamma Correction 2.2+ Setting */
> +#define MCS_GMCT2_2N 0xE200 /* Gamma Correction 2.2- Setting */
> +#define MCS_NO_DOC3 0xF5B6 /* Command not documented */
> +#define MCS_CMD2_ENA1 0xFF00 /* Enable Access Command2 "CMD2" */
> +#define MCS_CMD2_ENA2 0xFF80 /* Enable Access Orise Command2 */
> +
> +struct otm8009a_panel_priv {
> + struct udevice *reg;
> + struct gpio_desc reset;
> +};
> +
> +static void otm8009a_dcs_write_buf(struct udevice *dev, const void *data,
> + size_t len)
> +{
> + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
> + struct mipi_dsi_device *device = plat->device;
> +
> + if (mipi_dsi_dcs_write_buffer(device, data, len) < 0)
> + pr_err("mipi dsi dcs write buffer failed\n");
dev_err()
> +}
> +
> +#define dcs_write_seq(dev, seq...) \
> +({ \
> + static const u8 d[] = { seq }; \
> + otm8009a_dcs_write_buf(dev, d, ARRAY_SIZE(d)); \
> +})
> +
> +#define dcs_write_cmd_at(dev, cmd, seq...) \
> +({ \
> + static const u16 c = cmd; \
> + struct udevice *device = dev; \
> + dcs_write_seq(device, MCS_ADRSFT, (c) & 0xFF); \
> + dcs_write_seq(device, (c) >> 8, seq); \
> +})
> +
> +static int otm8009a_init_sequence(struct udevice *dev)
> +{
> + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
> + struct mipi_dsi_device *device = plat->device;
> + int ret;
> +
> + /* Enter CMD2 */
> + dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0x80, 0x09, 0x01);
> +
> + /* Enter Orise Command2 */
> + dcs_write_cmd_at(dev, MCS_CMD2_ENA2, 0x80, 0x09);
> +
> + dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL, 0x30);
> + mdelay(10);
> +
> + dcs_write_cmd_at(dev, MCS_NO_DOC1, 0x40);
> + mdelay(10);
> +
> + dcs_write_cmd_at(dev, MCS_PWR_CTRL4 + 1, 0xA9);
> + dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 1, 0x34);
> + dcs_write_cmd_at(dev, MCS_P_DRV_M, 0x50);
> + dcs_write_cmd_at(dev, MCS_VCOMDC, 0x4E);
> + dcs_write_cmd_at(dev, MCS_OSC_ADJ, 0x66); /* 65Hz */
> + dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 2, 0x01);
> + dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 5, 0x34);
> + dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 4, 0x33);
> + dcs_write_cmd_at(dev, MCS_GVDDSET, 0x79, 0x79);
> + dcs_write_cmd_at(dev, MCS_SD_CTRL + 1, 0x1B);
> + dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 2, 0x83);
> + dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL + 1, 0x83);
> + dcs_write_cmd_at(dev, MCS_RGB_VID_SET, 0x0E);
> + dcs_write_cmd_at(dev, MCS_PANSET, 0x00, 0x01);
> +
> + dcs_write_cmd_at(dev, MCS_GOAVST, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00);
> + dcs_write_cmd_at(dev, MCS_GOACLKA1, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00,
> + 0x00, 0x18, 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00);
> + dcs_write_cmd_at(dev, MCS_GOACLKA3, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00,
> + 0x00, 0x18, 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00);
> + dcs_write_cmd_at(dev, MCS_GOAECLK, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00,
> + 0x01, 0x02, 0x00, 0x00);
> +
> + dcs_write_cmd_at(dev, MCS_NO_DOC2, 0x00);
> +
> + dcs_write_cmd_at(dev, MCS_PANCTRLSET1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
> + dcs_write_cmd_at(dev, MCS_PANCTRLSET2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
> + 0, 0, 0, 0, 0);
> + dcs_write_cmd_at(dev, MCS_PANCTRLSET3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
> + 0, 0, 0, 0, 0);
> + dcs_write_cmd_at(dev, MCS_PANCTRLSET4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
> + dcs_write_cmd_at(dev, MCS_PANCTRLSET5, 0, 4, 4, 4, 4, 4, 0, 0, 0, 0,
> + 0, 0, 0, 0, 0);
> + dcs_write_cmd_at(dev, MCS_PANCTRLSET6, 0, 0, 0, 0, 0, 0, 4, 4, 4, 4,
> + 4, 0, 0, 0, 0);
> + dcs_write_cmd_at(dev, MCS_PANCTRLSET7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
> + dcs_write_cmd_at(dev, MCS_PANCTRLSET8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
> + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
> +
> + dcs_write_cmd_at(dev, MCS_PANU2D1, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25,
> + 0x00, 0x00, 0x00, 0x00);
> + dcs_write_cmd_at(dev, MCS_PANU2D2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02);
> + dcs_write_cmd_at(dev, MCS_PANU2D3, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_cmd_at(dev, MCS_PAND2U1, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26,
> + 0x00, 0x00, 0x00, 0x00);
> + dcs_write_cmd_at(dev, MCS_PAND2U2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01);
> + dcs_write_cmd_at(dev, MCS_PAND2U3, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> +
> + dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 1, 0x66);
> +
> + dcs_write_cmd_at(dev, MCS_NO_DOC3, 0x06);
> +
> + dcs_write_cmd_at(dev, MCS_GMCT2_2P, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
> + 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
> + 0x01);
> + dcs_write_cmd_at(dev, MCS_GMCT2_2N, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
> + 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
> + 0x01);
> +
> + /* Exit CMD2 */
> + dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0xFF, 0xFF, 0xFF);
> +
> + ret = mipi_dsi_dcs_nop(device);
> + if (ret)
> + return ret;
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(device);
> + if (ret)
> + return ret;
> +
> + /* Wait for sleep out exit */
> + mdelay(120);
> +
> + /* Default portrait 480x800 rgb24 */
> + dcs_write_seq(dev, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
> +
> + ret = mipi_dsi_dcs_set_column_address(device, 0, 479);
> + if (ret)
> + return ret;
> +
> + ret = mipi_dsi_dcs_set_page_address(device, 0, 799);
> + if (ret)
> + return ret;
> +
> + /* See otm8009a driver documentation for pixel format descriptions */
> + ret = mipi_dsi_dcs_set_pixel_format(device, MIPI_DCS_PIXEL_FMT_24BIT |
> + MIPI_DCS_PIXEL_FMT_24BIT << 4);
> + if (ret)
> + return ret;
> +
> + /* Disable CABC feature */
> + dcs_write_seq(dev, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> +
> + ret = mipi_dsi_dcs_set_display_on(device);
> + if (ret)
> + return ret;
> +
> + ret = mipi_dsi_dcs_nop(device);
> + if (ret)
> + return ret;
> +
> + /* Send Command GRAM memory write (no parameters) */
> + dcs_write_seq(dev, MIPI_DCS_WRITE_MEMORY_START);
> +
> + return 0;
> +}
> +
> +static int otm8009a_panel_enable_backlight(struct udevice *dev)
> +{
> + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev);
> + struct mipi_dsi_device *device = plat->device;
> + int ret;
> +
> + device->lanes = 2;
> + device->format = MIPI_DSI_FMT_RGB888;
> + device->mode_flags = MIPI_DSI_MODE_VIDEO |
> + MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_attach(device);
> + if (ret < 0)
> + return ret;
> +
> + pr_info("%s: initialize panel\n", __func__);
Is it useful to print this each time the backligth is enabled ?
> + ret = otm8009a_init_sequence(dev);
> + if (ret)
> + return ret;
> +
> + /*
> + * Power on the backlight with the requested brightness
> + * Note We can not use mipi_dsi_dcs_set_display_brightness()
> + * as otm8009a driver support only 8-bit brightness (1 param).
> + */
> + pr_info("%s: start, backlight\n", __func__);
ditto
> +
> + dcs_write_seq(dev, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
> + OTM8009A_BACKLIGHT_DEFAULT);
> +
> + /* Update Brightness Control & Backlight */
> + dcs_write_seq(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
> +
> + /* need to wait a few time before set the DSI bridge in video mode */
> + mdelay(10);
> +
> + return 0;
> +}
> +
> +static int otm8009a_panel_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct otm8009a_panel_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
> + ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev,
> + "power-supply", &priv->reg);
> + if (ret) {
> + pr_err("%s: Warning: cannot get power supply\n",
> + __func__);
dev_err()
> + if (ret != -ENOENT)
> + return ret;
> + }
> + }
> +
> + ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset,
> + GPIOD_IS_OUT);
> + if (ret) {
> + pr_err("%s: Warning: cannot get reset GPIO\n", __func__);
ditto
> + if (ret != -ENOENT)
> + return ret;
> + }
> +
> + /* reset panel must be done before probe */
> + dm_gpio_set_value(&priv->reset, true);
> +
> + return 0;
> +}
> +
> +static int otm8009a_panel_probe(struct udevice *dev)
> +{
> + struct otm8009a_panel_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
> + pr_err("%s: Enable regulator '%s'\n", __func__,
> + priv->reg->name);
debug() ?
> + ret = regulator_set_enable(priv->reg, true);
> + if (ret)
> + return ret;
> + }
> +
> + dm_gpio_set_value(&priv->reset, false);
> +
> + return 0;
> +}
> +
> +static const struct panel_ops otm8009a_panel_ops = {
> + .enable_backlight = otm8009a_panel_enable_backlight,
> +};
> +
> +static const struct udevice_id otm8009a_panel_ids[] = {
> + { .compatible = "orisetech,otm8009a" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(otm8009a_panel) = {
> + .name = "otm8009a_panel",
> + .id = UCLASS_PANEL,
> + .of_match = otm8009a_panel_ids,
> + .ops = &otm8009a_panel_ops,
> + .ofdata_to_platdata = otm8009a_panel_ofdata_to_platdata,
> + .probe = otm8009a_panel_probe,
> + .platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat),
> + .priv_auto_alloc_size = sizeof(struct otm8009a_panel_priv),
> +};
>
More information about the U-Boot
mailing list