[U-Boot] [PATCH 3/3] sunxi: Add extra I2C bus support to Ainol AW1 defconfig

[Paul Kocialkowski]

Spam detection software, running on the system "lists.denx.de",
has identified this incoming email as possible spam.  The original
message has been attached to this so you can view it or label
similar future email.  If you have any questions, see
@@CONTACT_ADDRESS@@ for details.

Content preview:  I2C bus 1 is used for the accelerometer and i2c bus 2 for
  the touchscreen of the device. While these are not supported in U-Boot, its
   command line can be used to access these peripherals. Signed-off-by: Paul
   Kocialkowski <contact at paulk.fr> --- configs/Ainol_AW1_defconfig | 2 ++ 1
  file changed, 2 insertions(+) [...] 

Content analysis details:   (5.2 points, 5.0 required)

 pts rule name              description
---- ---------------------- --------------------------------------------------
 1.3 RCVD_IN_RP_RNBL        RBL: Relay in RNBL,
                            https://senderscore.org/blacklistlookup/
                           [77.128.107.220 listed in bl.score.senderscore.com]
 0.0 RCVD_IN_SORBS_DUL      RBL: SORBS: sent directly from dynamic IP address
                            [77.128.107.220 listed in dnsbl.sorbs.net]
 3.6 RCVD_IN_PBL            RBL: Received via a relay in Spamhaus PBL
                            [77.128.107.220 listed in zen.spamhaus.org]
 0.4 RDNS_DYNAMIC           Delivered to internal network by host with
                            dynamic-looking rDNS


-------------- next part --------------
An embedded message was scrubbed...
From: Paul Kocialkowski <contact at paulk.fr>
Subject: [PATCH 3/3] sunxi: Add extra I2C bus support to Ainol AW1 defconfig
Date: Sun, 25 Mar 2018 14:36:01 +0200
Size: 2046
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180325/d349749f/attachment.mht>