[U-Boot] [PATCH 1/3] board: ti: am43xx: Define embedded_dtb_select for runtime DTB selection in U-boot

[Vignesh R]

AM437x QSPI boot is a single stage boot and hence needs runtime DTB
selection to support AM437x-SK and AM437x-IDK with DM enabled. This is
required to move am43xx_evm_qspiboot_defconfig to use DM/DT.

Signed-off-by: Vignesh R <vigneshr at ti.com>
---
 board/ti/am43xx/board.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 715960a596e9..38af1673273b 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -852,10 +852,14 @@ int ft_board_setup(void *blob, bd_t *bd)
 }
 #endif
 
-#ifdef CONFIG_SPL_LOAD_FIT
+#if defined(CONFIG_SPL_LOAD_FIT) || defined(CONFIG_DTB_RESELECT)
 int board_fit_config_name_match(const char *name)
 {
-	if (board_is_evm() && !strcmp(name, "am437x-gp-evm"))
+	bool eeprom_read = board_ti_was_eeprom_read();
+
+	if (!strcmp(name, "am4372-generic") && !eeprom_read)
+		return 0;
+	else if (board_is_evm() && !strcmp(name, "am437x-gp-evm"))
 		return 0;
 	else if (board_is_sk() && !strcmp(name, "am437x-sk-evm"))
 		return 0;
@@ -868,6 +872,16 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
+#ifdef CONFIG_DTB_RESELECT
+int embedded_dtb_select(void)
+{
+	do_board_detect();
+	fdtdec_setup();
+
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_TI_SECURE_DEVICE
 void board_fit_image_post_process(void **p_image, size_t *p_size)
 {
-- 
2.16.2