[U-Boot] [PATCH 21/36] rockchip: rk3128: prepare use common board file

[Kever Yang]

remoe rk3128 board file and move SoC spec setting into rk3128.c

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

 arch/arm/mach-rockchip/rk3128-board.c | 127 ----------------------------------
 1 file changed, 127 deletions(-)
 delete mode 100644 arch/arm/mach-rockchip/rk3128-board.c

diff --git a/arch/arm/mach-rockchip/rk3128-board.c b/arch/arm/mach-rockchip/rk3128-board.c
deleted file mode 100644
index 2e8393d..0000000
--- a/arch/arm/mach-rockchip/rk3128-board.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-#include <common.h>
-#include <clk.h>
-#include <dm.h>
-#include <ram.h>
-#include <syscon.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/periph.h>
-#include <asm/arch/grf_rk3128.h>
-#include <asm/arch/boot_mode.h>
-#include <asm/arch/timer.h>
-#include <power/regulator.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-__weak int rk_board_late_init(void)
-{
-	return 0;
-}
-
-int board_late_init(void)
-{
-	setup_boot_mode();
-
-	return rk_board_late_init();
-}
-
-int board_init(void)
-{
-	int ret = 0;
-
-	rockchip_timer_init();
-
-	ret = regulators_enable_boot_on(false);
-	if (ret) {
-		debug("%s: Cannot enable boot on regulator\n", __func__);
-		return ret;
-	}
-
-	return 0;
-}
-
-int dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	gd->bd->bi_dram[0].size = 0x8400000;
-	/* Reserve 0xe00000(14MB) for OPTEE with TA enabled, otherwise 2MB */
-	gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE
-				+ gd->bd->bi_dram[0].size + 0xe00000;
-	gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start
-				+ gd->ram_size - gd->bd->bi_dram[1].start;
-
-	return 0;
-}
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
-	/* Enable D-cache. I-cache is already enabled in start.S */
-	dcache_enable();
-}
-#endif
-
-#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
-#include <usb.h>
-#include <usb/dwc2_udc.h>
-
-static struct dwc2_plat_otg_data rk3128_otg_data = {
-	.rx_fifo_sz	= 512,
-	.np_tx_fifo_sz	= 16,
-	.tx_fifo_sz	= 128,
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-	int node;
-	const char *mode;
-	bool matched = false;
-	const void *blob = gd->fdt_blob;
-
-	/* find the usb_otg node */
-	node = fdt_node_offset_by_compatible(blob, -1,
-					     "rockchip,rk3128-usb");
-
-	while (node > 0) {
-		mode = fdt_getprop(blob, node, "dr_mode", NULL);
-		if (mode && strcmp(mode, "otg") == 0) {
-			matched = true;
-			break;
-		}
-
-		node = fdt_node_offset_by_compatible(blob, node,
-						     "rockchip,rk3128-usb");
-	}
-	if (!matched) {
-		debug("Not found usb_otg device\n");
-		return -ENODEV;
-	}
-	rk3128_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
-
-	return dwc2_udc_probe(&rk3128_otg_data);
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_USB_FUNCTION_FASTBOOT)
-int fb_set_reboot_flag(void)
-{
-	struct rk3128_grf *grf;
-
-	printf("Setting reboot to fastboot flag ...\n");
-	grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
-	/* Set boot mode to fastboot */
-	writel(BOOT_FASTBOOT, &grf->os_reg[0]);
-
-	return 0;
-}
-#endif
-- 
1.9.1