[U-Boot] [PATCH 3/6] arm: zynq: Use i2c-mux instead of i2cswitch for pca9548

[Michal Simek]

i2c muxes should described like this.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynq-zc702.dts | 2 +-
 arch/arm/dts/zynq-zc706.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index b95c1608d220..1410c4d7b6bd 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -111,7 +111,7 @@
 	scl-gpios = <&gpio0 50 0>;
 	sda-gpios = <&gpio0 51 0>;
 
-	i2cswitch at 74 {
+	i2c-mux at 74 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index dbb57445ca7c..c782064a8036 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -62,7 +62,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 
-	i2cswitch at 74 {
+	i2c-mux at 74 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
1.9.1