[U-Boot] [PATCH v10 2/3] Adding TCP
Joe Hershberger
joe.hershberger at ni.com
Tue May 1 01:44:31 UTC 2018
Hi Duncan,
On Sat, Apr 14, 2018 at 6:43 PM, <DH at synoia.com> wrote:
> From: Duncan Hare <DuncanCHare at yahoo.com>
>
> All the code is new, and not copied from any source.
>
> Series-changes
> The previous patch was using an old version of net/Kconfig,
> which prevented requesting options for a bootp/dhcp request.
>
> A similar issue fixed with a cmd/Kconfig.
> Items in include/net.h fixed.
Please follow the format as listed in the patman README:
"""
Series-changes: n
- Guinea pig moved into its cage
- Other changes ending with a blank line
<blank line>
This can appear in any commit. It lists the changes for a
particular version n of that commit. The change list is
created based on this information. Each commit gets its own
change list and also the whole thing is repeated in the cover
letter (where duplicate change lines are merged).
By adding your change lists into your commits it is easier to
keep track of what happened. When you amend a commit, remember
to update the log there and then, knowing that the script will
do the rest.
"""
When you make changes to the patches based on my feedback, add to the
list of changes for version 11 as you make the changes so you won't
forget anything.
> Signed-off-by: Duncan Hare <DH at Synoia.com>
> Signed-off-by: Duncan Hare <DuncanCHare at yahoo.com>
> ---
>
> Why TCP:
>
> Currently file transfer are done using tftp or NFS both
> over udp. This requires a request to be sent from client
> (u-boot) to the boot server.
>
> For a 4 Mbyte kernel, with a 1k block size this requires
> 4,000 request for a block.
>
> Using a large block size, one greater than the Ethernet
> maximum frame size limitation, would require fragmentation,
> which u-boot supports. However missing fragment recovery
> requires timeout detection and re-transmission requests
> for missing fragments.
>
> In networks with large latency, for example: the internet,
> UDP is vwey slow. What is a 30 second transfer on a local
> boot server and LAN increase to over 3 minutes, because of
> all the requests/response traffic.
>
> This was anticipated in the evolution of the IP protocols
> and TCP was developed and then enhanced for high latency high
> bandwidth networks.
>
> The current standard is TCP with selective acknowledgment.
You make no mention in the commit log of this patch supporting
selective ack or not. Honestly, all of this description (above this
line) seems like info that should actually stay in the patch's log,
not in a note.
> Routine tcp_print_buffer() is used to print portions of
> non zero terminated buffers. If there is an existing routine
> please let me know. I'm from the world of length fields
> not zero terminated strings (zOS).
>
>
> Changes in v10: None
>
> include/net.h | 8 +-
> include/net/tcp.h | 218 ++++++++++++++++
> net/Kconfig | 5 +
> net/Makefile | 2 +-
> net/net.c | 51 +++-
> net/tcp.c | 749 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 1023 insertions(+), 10 deletions(-)
> create mode 100644 include/net/tcp.h
> create mode 100644 net/tcp.c
>
> diff --git a/include/net.h b/include/net.h
> index 7e5f5a6a5b..e29d804a23 100644
> --- a/include/net.h
> +++ b/include/net.h
> @@ -548,7 +548,7 @@ extern int net_restart_wrap; /* Tried all network devices */
>
> enum proto_t {
> BOOTP, RARP, ARP, TFTPGET, DHCP, PING, DNS, NFS, CDP, NETCONS, SNTP,
> - TFTPSRV, TFTPPUT, LINKLOCAL
> + TFTPSRV, TFTPPUT, LINKLOCAL, WGET
Seems like this should be in the WGET patch, right?
> };
>
> extern char net_boot_file_name[1024];/* Boot File name */
> @@ -681,11 +681,15 @@ static inline void net_send_packet(uchar *pkt, int len)
> * @param payload_len Length of data after the UDP header
> */
> int net_send_ip_packet(uchar *ether, struct in_addr dest, int dport, int sport,
> - int payload_len, int proto);
> + int payload_len, int proto, u8 action, u32 tcp_seq_num,
> + u32 tcp_ack_num);
>
> int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport,
> int sport, int payload_len);
>
> +int net_send_tcp_packet(int payload_len, int dport, int sport, u8 action,
> + u32 tcp_seq_num, u32 tcp_ack_num);
> +
> /* Processes a received packet */
> void net_process_received_packet(uchar *in_packet, int len);
>
> diff --git a/include/net/tcp.h b/include/net/tcp.h
> new file mode 100644
> index 0000000000..81f263351e
> --- /dev/null
> +++ b/include/net/tcp.h
> @@ -0,0 +1,218 @@
> +/*
> + * TCP Support for file transfer.
> + *
> + * Copyright 2017 Duncan Hare, All rights reserved.
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#define TCP_ACTIVITY 127 /* Activity on downloading */
What is the meaning of this number? Number of packets before the
console adds a progress mark? Please add a more verbose comment.
> +
> +struct ip_tcp_hdr {
> + u8 ip_hl_v; /* header length and version */
> + u8 ip_tos; /* type of service */
> + u16 ip_len; /* total length */
> + u16 ip_id; /* identification */
> + u16 ip_off; /* fragment offset field */
> + u8 ip_ttl; /* time to live */
> + u8 ip_p; /* protocol */
> + u16 ip_sum; /* checksum */
> + struct in_addr ip_src; /* Source IP address */
> + struct in_addr ip_dst; /* Destination IP address */
> + u16 tcp_src; /* TCP source port */
> + u16 tcp_dst; /* TCP destination port */
> + u32 tcp_seq; /* TCP sequence number */
> + u32 tcp_ack; /* TCP Acknowledgment number */
> + u8 tcp_hlen; /* 4 bits TCP header Length/4 */
> + /* 4 bits Reserved */
> + /* 2 more bits reserved */
> + u8 tcp_flags; /* see defines */
> + u16 tcp_win; /* TCP windows size */
> + u16 tcp_xsum; /* Checksum */
> + u16 tcp_ugr; /* Pointer to urgent data */
> +} __packed;
> +
> +#define IP_TCP_HDR_SIZE (sizeof(struct ip_tcp_hdr))
> +#define TCP_HDR_SIZE (IP_TCP_HDR_SIZE - IP_HDR_SIZE)
> +
> +#define TCP_DATA 0x00 /* Data Packet - internal use only */
> +#define TCP_FIN 0x01 /* Finish flag */
> +#define TCP_SYN 0x02 /* Synch (start) flag */
> +#define TCP_RST 0x04 /* reset flag */
> +#define TCP_PUSH 0x08 /* Push - Notify app */
> +#define TCP_ACK 0x10 /* Acknowledgment of data received */
> +#define TCP_URG 0x20 /* Urgent */
> +#define TCP_ECE 0x40 /* Congestion control */
> +#define TCP_CWR 0x80 /* Congestion Control */
Why do these have the same comment? Mistake? If not, elaborate in the comment.
> +
> +/*
> + * TCP header options, Seq, MSS, and SACK
> + */
> +
> +#define TCP_SACK 32 /* Number of packets analyzed */
> + /* on leading edge of stream */
> +
> +#define TCP_O_END 0x00 /* End of option list */
> +#define TCP_1_NOP 0x01 /* Single padding NOP */
> +#define TCP_O_NOP 0x01010101 /* NOPs pad to 32 bit boundary */
> +#define TCP_O_MSS 0x02 /* MSS Size option */
> +#define TCP_O_SCL 0x03 /* Window Scale option */
> +#define TCP_P_SACK 0x04 /* SACK permitted */
> +#define TCP_V_SACK 0x05 /* SACK values */
> +#define TCP_O_TS 0x08 /* Timestanp option */
Timestanp -> Timestamp
> +#define TCP_OPT_LEN_2 0x02
> +#define TCP_OPT_LEN_3 0x03
> +#define TCP_OPT_LEN_4 0x04
> +#define TCP_OPT_LEN_6 0x06
> +#define TCP_OPT_LEN_8 0x08
> +#define TCP_OPT_LEN_A 0x0a /* Timestamp Length */
> +
> +/*
> + * Please review the warning in net.c about these two parameters.
> + * They are part of a promise of RX buffer size to the sending TCP
> + */
> +
> +#define TCP_MSS 1460 /* Max segment size - 1460 */
Not sure why you are adding the value to the comment as well... just 2
places to touch if they need to change. Please remove the numbers from
these comments.
> +#define TCP_SCALE 0x01 /* Scale 1 */
> +
> +struct tcp_mss { /* TCP Mex Segment size */
Mex -> Max
> + u8 kind; /* 0x02 */
Why are you putting numbers here? Seems like they should instead be
"#define TCP_MSS_KIND_x 0x02" that specify valid numbers for "kind".
Same applies for other struct fields here.
> + u8 len; /* 0x04 */
> + u16 mss; /* 1460 - Max segment size */
> +} __packed;
> +
> +struct tcp_scale { /* TCP Windows Scale */
> + u8 kind; /* 0x03 */
> + u8 len; /* 0x03 */
> + u8 scale; /* win shift fat fast networks */
"fat"? Also, what units?
> +} __packed;
> +
> +struct tcp_sack_p { /* SACK permitted */
> + u8 kind; /* 0x04 */
> + u8 len; /* Length */
> +} __packed;
> +
> +struct sack_edges {
> + u32 l;
> + u32 r;
More verbose names. "left" and "right"?
> +} __packed;
> +
> +#define TCP_SACK_SIZE (sizeof(struct sack_edges))
> +
> +#define TCP_SACK_HILLS 4
Please add a comment - what a "hill" is.
> +
> +struct tcp_sack_v {
> + u8 kind; /* 0x05 */
> + u8 len; /* Length */
> + struct sack_edges hill[TCP_SACK_HILLS]; /* L & R widow edges */
> +} __packed;
> +
> +struct tcp_t_opt { /* TCP time stamps option */
> + u8 kind; /* 0x08 */
> + u8 len; /* 0x0a */
> + u32 t_snd; /* Sender timestamp */
> + u32 t_rcv; /* Receiver timestamp */
> +} __packed;
> +
> +#define TCP_TSOPT_SIZE (sizeof(struct tcp_t_opt))
> +
> +/*
> + * ip tcp structure with options
> + */
> +
> +struct ip_tcp_hdr_o {
> + struct ip_tcp_hdr hdr;
> + struct tcp_mss mss;
> + struct tcp_scale scale;
> + struct tcp_sack_p sack_p;
> + struct tcp_t_opt t_opt;
> + u8 end;
> +} __packed;
> +
> +#define IP_TCP_O_SIZE (sizeof(struct ip_tcp_hdr_o))
In general, when you are not trying to align a number of defines (and
in my opinion, even then) only use a single space between the name and
the implementation.
> +
> +struct ip_tcp_hdr_s {
> + struct ip_tcp_hdr hdr;
> + struct tcp_t_opt t_opt;
> + struct tcp_sack_v sack_v;
> + u8 end;
> +} __packed;
> +
> +#define IP_TCP_SACK_SIZE (sizeof(struct ip_tcp_hdr_s))
> +
> +/*
> + * TCP pseudo header definitions
> + */
> +#define PSEUDO_PAD_SIZE 8
> +
> +struct pseudo_hdr {
> + u8 padding[PSEUDO_PAD_SIZE]; /* pseudo hdr size = ip_tcp hdr size */
> + struct in_addr p_src;
> + struct in_addr p_dst;
> + u8 rsvd;
> + u8 p;
> + u16 len;
> +} __packed;
> +
> +#define PSEUDO_HDR_SIZE (sizeof(struct pseudo_hdr)) - PSEUDO_PAD_SIZE
> +
> +/*
> + * union for building IP/TCP packet.
> + * build Pseudo header in packed buffer first, calculate TCP checksum
> + * then build IP header in packed buffer.
Clean up formatting. Two spaces in third line.Missing comma at end of
second line, Capitalize Build, lowercase pseudo.
Generally written as TCP/IP. Is there some reason you are reversing that here?
> + */
> +
> +union tcp_build_pkt {
> + struct pseudo_hdr ph;
> + struct ip_tcp_hdr_o ip;
> + struct ip_tcp_hdr_s sack;
> + uchar raw[1600];
> +} __packed;
> +
> +/*
> + * TCP STATE MACHINE STATES FOR SOCKET
It is cool, but there's no need to shout. Use normal English capitalization.
> + */
> +
> +enum TCP_STATE {
> + TCP_CLOSED, /* Need to send SYN to connect */
> + TCP_SYN_SENT, /* Trying to connect, waiting for SYN ACK */
> + TCP_ESTABLISHED, /* both server & client have a connection */
> + TCP_CLOSE_WAIT, /* Rec FIN, passed to app for FIN, ACK rsp*/
> + TCP_CLOSING, /* Rec FIN, sent FIN, ACK waiting for ACK */
> + TCP_FIN_WAIT_1, /* Sent FIN waiting for response */
> + TCP_FIN_WAIT_2 /* Rec ACK from FIN sent, waiting for FIN */
> +};
> +
Please add function documentation here for the functions below.
> +int tcp_find_in_buffer(uchar raw[], int payload_len, uchar field[],
> + int field_len);
> +void tcp_print_buffer(uchar raw[], int pkt_len, int payload_len,
> + int hdr_len, bool hide);
> +enum TCP_STATE tcp_get_tcp_state(void);
> +void tcp_set_tcp_state(enum TCP_STATE new_state);
> +int tcp_set_tcp_header(uchar *pkt, int dport, int sport, int payload_len,
> + u8 action, u32 tcp_seq_num, u32 tcp_ack_num);
> +
> +/*
> + * An incoming packet handler.
> + * @param pkt pointer to the application packet
> + * @param dport destination UDP port
> + * @param sip source IP address
> + * @param sport source UDP port
> + * @param len packet length
> + */
> +typedef void rxhand_tcp(uchar *pkt, unsigned int dport,
> + struct in_addr sip, unsigned int sport,
> + unsigned int len);
> +void tcp_set_tcp_handler(rxhand_tcp *f);
> +
> +void rxhand_tcp_f(union tcp_build_pkt *b, unsigned int len);
> +
> +/*
> + * An incoming TCP packet handler for the TCP protocol.
> + * There is also a dynamic function pointer for TCP based commands to
> + * receive incoming traffic after the TCP protocol code has done its work.
> + */
> +
> +void rxhand_action(u8 tcp_action, int payload_len, u32 tcp_seq_num,
> + u32 tcp_ack_num, unsigned int pkt_len,
> + union tcp_build_pkt *b);
> diff --git a/net/Kconfig b/net/Kconfig
> index 143c4416cd..cc6dd83fc4 100644
> --- a/net/Kconfig
> +++ b/net/Kconfig
> @@ -33,6 +33,11 @@ config NET_TFTP_VARS
> If unset, timeout and maximum are hard-defined as 1 second
> and 10 timouts per TFTP transfer.
>
> +config TCP
> + bool "Include Subset TCP stack for wget"
Replace with "TCP stack"
> + help
> + TCP protocol support for wget.
> +
> config BOOTP_BOOTPATH
> bool "Enable BOOTP BOOTPATH"
> depends on CMD_NET
> diff --git a/net/Makefile b/net/Makefile
> index ae54eee5af..25729ebeeb 100644
> --- a/net/Makefile
> +++ b/net/Makefile
> @@ -25,7 +25,7 @@ obj-$(CONFIG_CMD_PING) += ping.o
> obj-$(CONFIG_CMD_RARP) += rarp.o
> obj-$(CONFIG_CMD_SNTP) += sntp.o
> obj-$(CONFIG_CMD_NET) += tftp.o
> -
> +obj-$(CONFIG_TCP) += tcp.o
> # Disable this warning as it is triggered by:
> # sprintf(buf, index ? "foo%d" : "foo", index)
> # and this is intentional usage.
> diff --git a/net/net.c b/net/net.c
> index df4e7317e7..7adc4b472c 100644
> --- a/net/net.c
> +++ b/net/net.c
> @@ -107,6 +107,9 @@
> #if defined(CONFIG_CMD_SNTP)
> #include "sntp.h"
> #endif
> +#if defined(CONFIG_TCP)
There is nothing in the tcp header that we can't include when TCP is
not enabled, right? Remove the include guard and always include it.
> +#include <net/tcp.h>
> +#endif
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -382,6 +385,9 @@ void net_init(void)
>
> /* Only need to setup buffer pointers once. */
> first_call = 0;
> +#if defined(CONFIG_TCP)
> + tcp_set_tcp_state(TCP_CLOSED);
> +#endif
> }
>
> net_init_loop();
> @@ -781,11 +787,22 @@ int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport, int sport,
> int payload_len)
> {
> return net_send_ip_packet(ether, dest, dport, sport, payload_len,
> - IPPROTO_UDP);
> + IPPROTO_UDP, 0, 0, 0);
> +}
> +
> +#if defined(CONFIG_TCP)
> +int net_send_tcp_packet(int payload_len, int dport, int sport, u8 action,
> + u32 tcp_seq_num, u32 tcp_ack_num)
> +{
> + return net_send_ip_packet(net_server_ethaddr, net_server_ip, dport,
> + sport, payload_len, IPPROTO_TCP, action,
> + tcp_seq_num, tcp_ack_num);
> }
> +#endif
>
> int net_send_ip_packet(uchar *ether, struct in_addr dest, int dport, int sport,
> - int payload_len, int proto)
> + int payload_len, int proto, u8 action, u32 tcp_seq_num,
> + u32 tcp_ack_num)
> {
> uchar *pkt;
> int eth_hdr_size;
> @@ -794,6 +811,13 @@ int net_send_ip_packet(uchar *ether, struct in_addr dest, int dport, int sport,
> debug_cond(DEBUG_DEV_PKT,
> "UDP Send (to=%pI4, from=%pI4, len=%d)\n",
> &dest, &net_ip, payload_len);
> +#if defined(CONFIG_TCP)
> +
> + } else {
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Send (%pI4, %pI4, len=%d, A=%x)\n",
> + &dest, &net_ip, payload_len, action);
> +#endif
> }
>
> /* make sure the net_tx_packet is initialized (net_init() was called) */
> @@ -812,15 +836,19 @@ int net_send_ip_packet(uchar *ether, struct in_addr dest, int dport, int sport,
> pkt = (uchar *)net_tx_packet;
>
> eth_hdr_size = net_set_ether(pkt, ether, PROT_IP);
> - switch (proto) {
> - case IPPROTO_UDP:
> + if (proto == IPPROTO_UDP) {
I don't like the switch away from the case structure and the
defaulting to sending TCP packets if the proto isn't UDP. Please keep
the case structure and the error on unimplemented protocols.
> net_set_udp_header(pkt + eth_hdr_size, dest,
> dport, sport, payload_len);
> pkt_hdr_size = eth_hdr_size + IP_UDP_HDR_SIZE;
> - break;
> - default:
> - return -1;
> +
> +#if defined(CONFIG_TCP)
> + } else {
> + pkt_hdr_size = eth_hdr_size +
> + tcp_set_tcp_header(pkt + eth_hdr_size, dport, sport,
> + payload_len, action,
> + tcp_seq_num, tcp_ack_num);
> }
> +#endif
This looks like it wouldn't compile. Shouldn't this #endif be before
the close brace?
>
> /* if MAC address was not discovered yet, do an ARP request */
> if (memcmp(ether, net_null_ethaddr, 6) == 0) {
> @@ -1225,6 +1253,15 @@ void net_process_received_packet(uchar *in_packet, int len)
> if (ip->ip_p == IPPROTO_ICMP) {
Looks like this would be better implemented with a case structure at
this point. Such a change should go in the preparation patch.
> receive_icmp(ip, len, src_ip, et);
> return;
> +#if defined(CONFIG_TCP)
> + } else if (ip->ip_p == IPPROTO_TCP) {
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP PH (to=%pI4, from=%pI4, len=%d)\n",
> + &dst_ip, &src_ip, len);
> +
> + rxhand_tcp_f((union tcp_build_pkt *)ip, len);
> + return;
> +#endif
> } else if (ip->ip_p != IPPROTO_UDP) { /* Only UDP packets */
> return;
> }
> diff --git a/net/tcp.c b/net/tcp.c
> new file mode 100644
> index 0000000000..9f4fc9fc20
> --- /dev/null
> +++ b/net/tcp.c
> @@ -0,0 +1,749 @@
> +/*
> + * Copyright 2017 Duncan Hare, all rights reserved.
You can change or range this year, but include 2018.
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +/*
> + * General Desription:
> + *
> + * TCP support for the wget command, for fast file downloading.
> + *
> + * HTTP/TCP Receiver:
> + *
> + * Prequeisites: - own ethernet address
> + * - own IP address
> + * - Server IP address
> + * - Server with TCP
> + * - TCP application (eg wget)
> + * Next Step HTTPS?
> + */
> +#include <common.h>
> +#include <command.h>
> +#include <console.h>
> +#include <environment.h>
> +#include <errno.h>
> +#include <net.h>
> +#include <net/tcp.h>
> +#if defined(CONFIG_CMD_WGET)
Don't put ifdefs around includes. Also, there is no concept of wget at
this point, so move this to the wget patch.
> +#include <net/wget.h>
> +#endif
> +
> +/*
> + * TCP sliding window control
> + * used by us to request re-TX
> + */
Why is this multi-line and stumpy? Make it a single line and remove
the blank line between the comment and what it comments on.
> +
> +static struct tcp_sack_v tcp_lost;
> +
> +/* TCP option timestamp */
> +static u32 loc_timestamp;
> +static u32 rmt_timestamp;
> +
> +u32 tcp_seq_init;
> +u32 tcp_ack_edge;
> +u32 tcp_seq_max;
> +
> +int tcp_activity_count;
> +
> +/*
> + * Search for TCP_SACK and review the
> + * comments before the code section
> + * TCP_SACK is the number of packets
> + * at the front of the stream
> + */
Make comments use as much of 80 chars as possible for wrapping.
> +
> +enum pkt_state {PKT, NOPKT};
> +struct sack_r {
> + struct sack_edges se;
> + enum pkt_state st;
> +};
> +
> +struct sack_r edge_a[TCP_SACK];
> +unsigned int sack_idx;
> +unsigned int prev_len;
> +
> +/* TCP connection state */
> +static enum TCP_STATE tcp_state;
> +
> +/*
> + * An incoming TCP packet handler for the TCP protocol.
> + * There is also a dymanic function pointer for TCP based commads to
dymanic -> dynamic
commads -> commands
> + * receive incoming traffic after the TCP protocol code has done its work.
> + */
> +
> +/* Current TCP RX packet handler */
> +static rxhand_tcp *tcp_packet_handler;
> +
> +enum TCP_STATE tcp_get_tcp_state(void)
> +{
> + return tcp_state;
> +}
> +
> +void tcp_set_tcp_state(enum TCP_STATE new_state)
> +{
> + tcp_state = new_state;
> +}
> +
> +void tcp_print_buffer(uchar raw[], int pkt_len, int payload_len,
> + int hdr_len, bool hide)
Should this be a debug-only function? Presumably we don't want to
print in general.
I also think you could just use the print_buffer() function in
lib/display_options.c. If you really think you need to add the hiding
option, it makes sense to add it in print_buffer().
> +{
> + int i;
> +
> + for (i = pkt_len - payload_len; i < pkt_len; i++) {
> + if (i <= hdr_len)
> + printf("%02X", raw[i]);
> + else if ((raw[i] > 0x19) && (raw[i] < 0x7f))
> + putc(raw[i]);
> + else if (hide == 0)
> + putc(raw[i]);
> + else
> + printf("%02X", raw[i]);
> + }
> + printf("%s", "\n");
> +}
> +
> +int tcp_find_in_buffer(uchar raw[], int payload_len, uchar field[],
> + int field_len)
This doesn't seem to be used anywhere in your series. Maybe it should
be removed?
> +{
> + int i, j;
> +
> + for (i = 0; i < payload_len; i++) {
> + if (raw[i] == field[0]) {
> + for (j = 1; j < field_len; j++) {
> + if (raw[i + j] != field[j])
> + break;
> + if (j == field_len)
> + return i;
> + }
> + }
> + }
> + return 0;
> +}
> +
> +static void dummy_handler(uchar *pkt, unsigned int dport,
> + struct in_addr sip, unsigned int sport,
> + unsigned int len)
> +{
> +}
> +
> +void tcp_set_tcp_handler(rxhand_tcp *f)
> +{
> + debug_cond(DEBUG_INT_STATE, "--- net_loop TCP handler set (%p)\n", f);
> + if (!f)
> + tcp_packet_handler = dummy_handler;
> + else
> + tcp_packet_handler = f;
> +}
> +
> +u16 tcp_set_pseudo_header(uchar *pkt, struct in_addr src, struct in_addr dest,
> + int tcp_len, int pkt_len)
> +{
> + union tcp_build_pkt *b = (union tcp_build_pkt *)pkt;
> + int checksum_len;
> +
> + /*
> + * Pseudo header
> + *
> + * Zero the byte after the last byte so that the header checksum
> + * will always work.
> + */
> +
> + pkt[pkt_len] = 0x00;
> +
> + net_copy_ip((void *)&b->ph.p_src, &src);
> + net_copy_ip((void *)&b->ph.p_dst, &dest);
> + b->ph.rsvd = 0x00;
> + b->ph.p = IPPROTO_TCP;
> + b->ph.len = htons(tcp_len);
> + checksum_len = tcp_len + PSEUDO_HDR_SIZE;
> +
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Pesudo Header (to=%pI4, from=%pI4, Len=%d)\n",
> + &b->ph.p_dst, &b->ph.p_src, checksum_len);
> +
> + return compute_ip_checksum(pkt + PSEUDO_PAD_SIZE, checksum_len);
> +}
> +
> +int net_set_ack_options(union tcp_build_pkt *b)
> +{
> + b->sack.hdr.tcp_hlen = (TCP_HDR_SIZE >> 2) << 4;
> +
> + b->sack.t_opt.kind = TCP_O_TS;
> + b->sack.t_opt.len = TCP_OPT_LEN_A;
> + b->sack.t_opt.t_snd = htons(loc_timestamp);
> + b->sack.t_opt.t_rcv = rmt_timestamp;
> + b->sack.sack_v.kind = 0x01;
Please don't use magic numbers. Make a #define for the value in tcp.h
and give it a meaningful name.
> + b->sack.sack_v.len = 0x00;
> +
> + if (tcp_lost.len > TCP_OPT_LEN_2) {
> + debug_cond(DEBUG_DEV_PKT, "TCP ack opt lost.len %x\n",
> + tcp_lost.len);
> + b->sack.sack_v.len = tcp_lost.len;
> + b->sack.sack_v.kind = TCP_V_SACK;
> + b->sack.sack_v.hill[0].l = htonl(tcp_lost.hill[0].l);
> + b->sack.sack_v.hill[0].r = htonl(tcp_lost.hill[0].r);
> +
> + /*
> + * These SACK structures are initialized with NOPs to
> + * provide TCP header alignment padding. There are 4
> + * SACK structures used for both header padding and
> + * internally.
> + */
> +
> + b->sack.sack_v.hill[1].l = htonl(tcp_lost.hill[1].l);
> + b->sack.sack_v.hill[1].r = htonl(tcp_lost.hill[1].r);
> + b->sack.sack_v.hill[2].l = htonl(tcp_lost.hill[2].l);
> + b->sack.sack_v.hill[2].r = htonl(tcp_lost.hill[2].r);
> + b->sack.sack_v.hill[3].l = TCP_O_NOP;
> + b->sack.sack_v.hill[3].r = TCP_O_NOP;
> + }
> +
> + /*
> + * TCP lengths are stored as a rounded up number of 32 bit words
> + * Add 3 to length round up, rounded, then divided into the length
> + * in 32 bit words.
> + */
> +
> + b->sack.hdr.tcp_hlen = (((TCP_HDR_SIZE + TCP_TSOPT_SIZE
> + + tcp_lost.len + 3) >> 2) << 4);
> +
> + /*
> + * This returns the actual rounded up length of the
> + * TCP header to add to the total packet length
> + */
> +
> + return b->sack.hdr.tcp_hlen >> 2;
> +}
> +
> +void net_set_syn_options(union tcp_build_pkt *b)
> +{
> + tcp_lost.len = 0;
> + b->ip.hdr.tcp_hlen = 0xa0;
> +
> + b->ip.mss.kind = TCP_O_MSS;
> + b->ip.mss.len = TCP_OPT_LEN_4;
> + b->ip.mss.mss = htons(TCP_MSS);
> + b->ip.scale.kind = TCP_O_SCL;
> + b->ip.scale.scale = TCP_SCALE;
> + b->ip.scale.len = TCP_OPT_LEN_3;
> + b->ip.sack_p.kind = TCP_P_SACK;
> + b->ip.sack_p.len = TCP_OPT_LEN_2;
> + b->ip.t_opt.kind = TCP_O_TS;
> + b->ip.t_opt.len = TCP_OPT_LEN_A;
> + loc_timestamp = get_ticks() % 3072;
Please don't use magic numbers. What is this?
> + rmt_timestamp = 0x00000000;
> + b->ip.t_opt.t_snd = 0;
> + b->ip.t_opt.t_rcv = 0x00000000;
> + b->ip.end = TCP_O_END;
> +}
> +
> +int tcp_set_tcp_header(uchar *pkt, int dport, int sport, int payload_len,
> + u8 action, u32 tcp_seq_num, u32 tcp_ack_num)
> +{
> + union tcp_build_pkt *b = (union tcp_build_pkt *)pkt;
> + int pkt_hdr_len;
> + int pkt_len;
> + int tcp_len;
> +
> + b->ip.hdr.tcp_flags = action;
> + pkt_hdr_len = IP_TCP_HDR_SIZE;
> + b->ip.hdr.tcp_hlen = 0x50; /* Header is 5 32 bit words */
> + /* 4 bits TCP header Length/4*/
> + /* 4 bits Reserved */
> + /* For options */
Reserved for options? If so, then: /* 4 bits Reserved for options */
If that makes the line too long, then remove the extra tab after the
semicolon on the first comment, or move all to a multi-line above the
code.
> + switch (action) {
> + case TCP_SYN:
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Hdr:SYN (%pI4, %pI4, sq=%d, ak=%d)\n",
> + &net_server_ip, &net_ip,
> + tcp_seq_num, tcp_ack_num);
> + tcp_activity_count = 0;
> + net_set_syn_options(b);
> + tcp_seq_num = 0;
> + tcp_ack_num = 0;
> + pkt_hdr_len = IP_TCP_O_SIZE;
> + if (tcp_state == TCP_SYN_SENT) { /* Too many sins */
Guess we had better buy some indulgences.
Or maybe you meant "Too many SYNs".
> + action = TCP_FIN;
> + tcp_state = TCP_FIN_WAIT_1;
> + } else {
> + tcp_state = TCP_SYN_SENT;
> + }
> + break;
> + case TCP_ACK:
> + pkt_hdr_len = IP_HDR_SIZE +
> + net_set_ack_options(b);
> + b->ip.hdr.tcp_flags = action;
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Hdr:ACK (%pI4, %pI4, s=%d, a=%d, A=%x)\n",
> + &net_server_ip, &net_ip, tcp_seq_num, tcp_ack_num,
> + action);
> + break;
> + case TCP_FIN:
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Hdr:FIN (%pI4, %pI4, s=%d, a=%d)\n",
> + &net_server_ip, &net_ip, tcp_seq_num, tcp_ack_num);
> + payload_len = 0;
> + pkt_hdr_len = IP_TCP_HDR_SIZE;
> + tcp_state = TCP_FIN_WAIT_1;
> +
> + break;
> +
> + /* Notify connection closing */
> +
> + case (TCP_FIN | TCP_ACK):
> + case ((TCP_FIN | TCP_ACK) | TCP_PUSH):
> + if (tcp_state == TCP_CLOSE_WAIT)
> + tcp_state = TCP_CLOSING;
> + tcp_ack_edge++;
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Hdr:FIN ACK PSH(%pI4, %pI4, s=%d, a=%d, A=%x)\n",
> + &net_server_ip, &net_ip,
> + tcp_seq_num, tcp_ack_edge, action);
> + /* FALLTHRU */
> + default:
> + pkt_hdr_len = IP_HDR_SIZE +
> + net_set_ack_options(b);
> + b->ip.hdr.tcp_flags = action | TCP_PUSH | TCP_ACK;
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Hdr:dft (%pI4, %pI4, s=%d, a=%d, A=%x)\n",
> + &net_server_ip, &net_ip,
> + tcp_seq_num, tcp_ack_num, action);
> + }
> +
> + pkt_len = pkt_hdr_len + payload_len;
> + tcp_len = pkt_len - IP_HDR_SIZE;
> +
> + /* TCP Header */
> + b->ip.hdr.tcp_ack = htonl(tcp_ack_edge);
> + b->ip.hdr.tcp_src = htons(sport);
> + b->ip.hdr.tcp_dst = htons(dport);
> + b->ip.hdr.tcp_seq = htonl(tcp_seq_num);
> + tcp_seq_num = tcp_seq_num + payload_len;
> +
> + /*
> + * TCP window size - TCP header variable tcp_win.
> + * Change tcp_win only if you have an understanding of network
> + * overrun, congestion, TCP segment sizes, TCP windows, TCP scale,
> + * queuing theory and packet buffering. If there are too few buffers,
> + * there will be data loss, recovery may work or the sending TCP,
> + * the server, could abort the stream transmission.
> + * MSS is governed by maximum Ethernet frame length.
> + * The number of buffers is governed by the desire to have a queue of
> + * full buffers to be processed at the destination to maximize
> + * throughput. Temporary memory use for the boot phase on modern
> + * SOCs is may not be considered a constraint to buffer space, if
> + * it is, then the u-boot tftp or nfs kernel netboot should be
> + * considered.
> + */
> +
> + b->ip.hdr.tcp_win = htons(PKTBUFSRX * TCP_MSS >> TCP_SCALE);
> +
> + b->ip.hdr.tcp_xsum = 0x0000;
> + b->ip.hdr.tcp_ugr = 0x0000;
> +
> + b->ip.hdr.tcp_xsum = tcp_set_pseudo_header(pkt, net_ip, net_server_ip,
> + tcp_len, pkt_len);
> +
> + /*
> + * IP Header
> + */
I don't think this comment provides any value. Please remove it.
> +
> + net_set_ip_header((uchar *)&b->ip, net_server_ip, net_ip,
> + pkt_len, IPPROTO_TCP);
> +
> + return pkt_hdr_len;
> +}
> +
> +/*
> + * Selective Acknowledgment (Essential for fast stream transfer)
> + *
> + * Before modifying this section of code, which the author found difficult
> + * to write, please be familiar with the SACK (Selective Acknowledgment) RFCs.
This commentary seems unnecessary, but if you feel strongly you can leave it in.
> + */
> +
> +void tcp_hole(u32 tcp_seq_num, u32 len, u32 tcp_seq_max)
> +{
> + unsigned int idx_sack;
> + unsigned int sack_end = TCP_SACK - 1;
> + unsigned int sack_in;
> + unsigned int hill = 0;
> + enum pkt_state expect = PKT;
> +
> + u32 seq = tcp_seq_num - tcp_seq_init;
> + u32 hol_l = tcp_ack_edge - tcp_seq_init;
> + u32 hol_r = 0;
> +
> + /* Place seq number in correct place */
This doesn't provide information.
> +
> + if (prev_len == 0)
> + prev_len = len;
> + idx_sack = sack_idx + ((tcp_seq_num - tcp_ack_edge) / prev_len);
> + if (idx_sack < TCP_SACK) {
> + edge_a[idx_sack].se.l = tcp_seq_num;
> + edge_a[idx_sack].se.r = tcp_seq_num + len;
> + edge_a[idx_sack].st = PKT;
> +
> + /* The fin (last) packet is not the same length as data packets,
This is an invalid multi-line comment format. Use standalone "/*"
> + * and if it's length is recorded and used for array index
> + * the array index calculations break.
> + */
> + if (prev_len < len)
> + prev_len = len;
> + }
> +
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP 1 seq %d, edg %d, len %d, sack_idx %d, sack_end %d\n",
> + seq, hol_l, len, sack_idx, sack_end);
> +
> + /* Right edge of contiguous stream, is the left edge of first hill */
> +
> + hol_l = tcp_seq_num - tcp_seq_init;
> + hol_r = hol_l + len;
> +
> + tcp_lost.len = TCP_OPT_LEN_2;
> +
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP 1 in %d, seq %d, pkt_l %d, pkt_r %d, sack_idx %d, sack_end %d\n",
> + idx_sack, seq, hol_l, hol_r, sack_idx, sack_end);
> +
> + for (sack_in = sack_idx; sack_in < sack_end && hill < TCP_SACK_HILLS;
> + sack_in++) {
> + switch (expect) {
> + case NOPKT:
> + switch (edge_a[sack_in].st) {
> + case NOPKT:
> + debug_cond(DEBUG_INT_STATE, "N");
> + break;
> + case PKT:
> + debug_cond(DEBUG_INT_STATE, "n");
> + tcp_lost.hill[hill].l =
> + edge_a[sack_in].se.l;
> + tcp_lost.hill[hill].r =
> + edge_a[sack_in].se.r;
> + expect = PKT;
> + break;
> + }
> + break;
> + case PKT:
> + switch (edge_a[sack_in].st) {
> + case NOPKT:
> + debug_cond(DEBUG_INT_STATE, "p");
> + if ((sack_in > sack_idx) &&
> + (hill < TCP_SACK_HILLS)) {
> + hill++;
> + tcp_lost.len += TCP_OPT_LEN_8;
> + }
> + expect = NOPKT;
> + break;
> + case PKT:
> + debug_cond(DEBUG_INT_STATE, "P");
> +
> + if (tcp_ack_edge == edge_a[sack_in].se.l) {
> + tcp_ack_edge = edge_a[sack_in].se.r;
> + edge_a[sack_in].st = NOPKT;
> + sack_idx++;
> + } else {
> + if (hill < TCP_SACK_HILLS)
> + tcp_lost.hill[hill].r =
> + edge_a[sack_in].se.r;
> + if (sack_in == sack_end - 1)
> + tcp_lost.hill[hill].r =
> + edge_a[sack_in].se.r;
> + }
> + break;
> + }
> + break;
> + }
> + }
> + debug_cond(DEBUG_INT_STATE, "\n");
> + if (tcp_lost.len <= TCP_OPT_LEN_2)
> + sack_idx = 0;
> +}
> +
> +void tcp_parse_options(uchar *o, int o_len)
> +{
> + struct tcp_t_opt *tsopt;
> + uchar *p = o;
> +
> + for (p = o; p < (o + o_len); p = p + p[1]) {
> + if (p[1] != 0) {
> + switch (p[0]) {
> + case TCP_O_END:
> + return;
Isn't this the same as break;?
> + case TCP_O_MSS:
> + break;
> + case TCP_O_SCL:
> + break;
> + case TCP_P_SACK:
> + break;
> + case TCP_V_SACK:
> + break;
Combine all of these "break" cases. Also, indent "break;".
> + case TCP_O_TS:
> + tsopt = (struct tcp_t_opt *)p;
> + rmt_timestamp = tsopt->t_snd;
> + return;
> + break;
> + }
> + if (p[0] == TCP_O_NOP)
> + p++;
> + } else {
> + return;
Isn't this the same as break;?
> + }
> + }
> +}
> +
> +u8 tcp_state_machine(u8 tcp_flags, u32 *tcp_seq_num, int payload_len)
> +{
> + u8 tcp_fin = tcp_flags & TCP_FIN;
> + u8 tcp_syn = tcp_flags & TCP_SYN;
> + u8 tcp_rst = tcp_flags & TCP_RST;
> + u8 tcp_push = tcp_flags & TCP_PUSH;
> + u8 tcp_ack = tcp_flags & TCP_ACK;
> + u8 action = TCP_DATA;
> + int i;
> +
> + /*
> + * tcp_flags are examined to determine TX action in a given state
> + * tcp_push is interpreted to mean "inform the app"
> + * urg, ece, cer and nonce flags are not supported.
> + *
> + * exe and crw are use to signal and confirm knowledge of congestion.
> + * This TCP only sends a file request and acks. If it generates
> + * congestion, the network is broken.
> + */
> +
> + debug_cond(DEBUG_INT_STATE, "TCP STATE ENTRY %x\n", action);
> + if (tcp_rst) {
> + action = TCP_DATA;
> + tcp_state = TCP_CLOSED;
> + net_set_state(NETLOOP_FAIL);
> + debug_cond(DEBUG_INT_STATE, "TCP Reset %x\n", tcp_flags);
> + return TCP_RST;
> + }
> +
> + switch (tcp_state) {
> + case TCP_CLOSED:
> + debug_cond(DEBUG_INT_STATE, "TCP CLOSED %x\n", tcp_flags);
Fix indent.
> + if (tcp_fin)
> + action = TCP_DATA;
> + if (tcp_syn)
> + action = TCP_RST;
> + if (tcp_ack)
> + action = TCP_DATA;
> + break;
Fix indent.
> + case TCP_SYN_SENT:
> + debug_cond(DEBUG_INT_STATE, "TCP_SYN_SENT %x, %d\n",
> + tcp_flags, *tcp_seq_num);
> + if (tcp_fin) {
> + action = action | TCP_PUSH;
> + tcp_state = TCP_CLOSE_WAIT;
> + }
> + if (tcp_syn) {
> + action = action | TCP_ACK | TCP_PUSH;
> + if (tcp_ack) {
> + tcp_seq_init = *tcp_seq_num;
> + *tcp_seq_num = *tcp_seq_num + 1;
> + tcp_seq_max = *tcp_seq_num;
> + tcp_ack_edge = *tcp_seq_num;
> + sack_idx = 0;
> + edge_a[sack_idx].se.l = *tcp_seq_num;
> + edge_a[sack_idx].se.r = *tcp_seq_num;
> + prev_len = 0;
> + tcp_state = TCP_ESTABLISHED;
> + for (i = 0; i < TCP_SACK; i++)
> + edge_a[i].st = NOPKT;
> + }
> + } else {
> + if (tcp_ack)
> + action = TCP_DATA;
> + }
> + break;
Fix indent
> + case TCP_ESTABLISHED:
> + debug_cond(DEBUG_INT_STATE,
> + "TCP_ESTABLISHED %x\n", tcp_flags);
> + if (*tcp_seq_num > tcp_seq_max)
> + tcp_seq_max = *tcp_seq_num;
> + if (payload_len > 0) {
> + tcp_hole(*tcp_seq_num, payload_len, tcp_seq_max);
> + tcp_fin = TCP_DATA; /* cause standalone FIN */
> + }
> +
> + if ((tcp_fin) && (tcp_lost.len <= TCP_OPT_LEN_2)) {
> + action = action | TCP_FIN | TCP_PUSH | TCP_ACK;
> + tcp_state = TCP_CLOSE_WAIT;
> + } else {
> + if (tcp_ack)
> + action = TCP_DATA;
> + }
> + if (tcp_push)
> + action = action | TCP_PUSH;
> + if (tcp_syn)
> + action = TCP_ACK + TCP_RST;
> + break;
Fix indent.
> + case TCP_CLOSE_WAIT:
> + debug_cond(DEBUG_INT_STATE, "TCP_CLOSE_WAIT (%x)\n", tcp_flags);
> + action = TCP_DATA; /* Wait for app */
> + break;
Fix indent.
> + case TCP_FIN_WAIT_2:
> + debug_cond(DEBUG_INT_STATE, "TCP_FIN_WAIT_2 (%x)\n", tcp_flags);
> + if (tcp_fin)
> + action = TCP_DATA;
> + if (tcp_syn)
> + action = TCP_DATA;
> + if (tcp_ack) {
> + action = TCP_PUSH | TCP_ACK;
> + tcp_state = TCP_CLOSED;
> + puts("\n");
> + }
> + break;
Fix indent.
> + case TCP_FIN_WAIT_1:
> + debug_cond(DEBUG_INT_STATE, "TCP_FIN_WAIT_1 (%x)\n", tcp_flags);
> + if (tcp_fin) {
> + action = TCP_ACK | TCP_FIN;
> + tcp_state = TCP_FIN_WAIT_2;
> + }
> + if (tcp_syn)
> + action = TCP_RST;
> + if (tcp_ack) {
> + tcp_state = TCP_CLOSED;
> + tcp_seq_num = tcp_seq_num + 1;
> + }
> + break;
Fix indent.
> + case TCP_CLOSING:
> + debug_cond(DEBUG_INT_STATE, "TCP_CLOSING (%x)\n", tcp_flags);
> + if (tcp_fin)
> + action = TCP_DATA;
> + if (tcp_syn)
> + action = TCP_RST;
> + if (tcp_ack) {
> + action = TCP_PUSH;
> + tcp_state = TCP_CLOSED;
> + puts("\n");
> + }
> + break;
Fix indent.
> + }
> + return action;
> +}
> +
> +void rxhand_tcp_f(union tcp_build_pkt *b, unsigned int pkt_len)
> +{
> + int tcp_len = pkt_len - IP_HDR_SIZE;
Single space before '='.
> + u16 tcp_rx_xsum = b->ip.hdr.ip_sum;
> + u8 tcp_action = TCP_DATA;
Single space before '='.
> + u32 tcp_seq_num;
> + u32 tcp_ack_num;
> + struct in_addr action_and_state;
> +
> + int tcp_hdr_len;
> + int payload_len;
> +
> + /*
> + * Verify IP header
> + */
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP RX in RX Sum (to=%pI4, from=%pI4, len=%d)\n",
> + &b->ip.hdr.ip_src, &b->ip.hdr.ip_dst, pkt_len);
> +
> + debug_cond(DEBUG_DEV_PKT,
> + "In__________________________________________\n");
Fix indent of these 2 functions.
> +
> + b->ip.hdr.ip_src = net_server_ip;
> + b->ip.hdr.ip_dst = net_ip;
> + b->ip.hdr.ip_sum = 0x0000;
Why all the spaces. Use a single space.
> + if (tcp_rx_xsum != compute_ip_checksum(b, IP_HDR_SIZE)) {
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP RX IP xSum Error (%pI4, =%pI4, len=%d)\n",
> + &net_ip, &net_server_ip, pkt_len);
> + return;
> + }
> +
> + /*
> + * Build Pseudo header and Verify TCP header
lower-case "pseudo" and "verify".
> + */
> + tcp_rx_xsum = b->ip.hdr.tcp_xsum;
> + b->ip.hdr.tcp_xsum = 0x0000;
> + if (tcp_rx_xsum != tcp_set_pseudo_header((uchar *)b, b->ip.hdr.ip_src,
> + b->ip.hdr.ip_dst, tcp_len,
> + pkt_len)) {
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP RX TCP xSum Error (%pI4, %pI4, len=%d)\n",
> + &net_ip, &net_server_ip, tcp_len);
> + return;
> + }
> +
> + tcp_hdr_len = (b->ip.hdr.tcp_hlen >> 2);
> + payload_len = tcp_len - tcp_hdr_len;
> +
> + if (tcp_hdr_len > TCP_HDR_SIZE)
> + tcp_parse_options((uchar *)b + IP_TCP_HDR_SIZE,
> + tcp_hdr_len - TCP_HDR_SIZE);
> + /*
> + * Incoming sequence and ack numbers are server's view of the numbers.
> + * The app must swap the numbers when responding.
> + */
> +
> + tcp_seq_num = ntohl(b->ip.hdr.tcp_seq);
> + tcp_ack_num = ntohl(b->ip.hdr.tcp_ack);
> +
> + /*
> + * Sent first packet send from server as first to app
Swap "send" and "sent". Also, end with '.'
> + * Other packets could be ordered, but are currently not ordered.
> + */
> +
> + tcp_action = tcp_state_machine(b->ip.hdr.tcp_flags,
> + &tcp_seq_num, payload_len);
> +
> + /*
> + * State altering command to be sent.
"State altering" -> "State-altering"
> + * The packet sequence and ack numbers are in the tcp_seq_num
> + * and tcp_ack_num variables. The current packet, its position
> + * in the data stream, is the in the range of those variables.
> + *
> + * In the "application push" invocation, the TCP header with all
> + * its information is pointed to by the packet pointer.
> + *
> + * in the typedef
"in" -> "In"
> + * void rxhand_tcp(uchar *pkt, unsigned int dport,
> + * struct in_addr sip, unsigned int sport,
> + * unsigned int len);
> + * *pkt is the pointer to the payload
> + * dport is used for tcp_seg_num
> + * action_and_state.s_addr is used for TCP state
> + * sport is used for tcp_ack_num (which is unused by the app)
> + * pkt_ length is the payload length.
> + *
> + * TCP_PUSH from the state machine with a payload length of 0 is a
> + * connect or disconnect event
> + */
> +
> + tcp_activity_count++;
> + if (tcp_activity_count > TCP_ACTIVITY) {
> + puts("| ");
> + tcp_activity_count = 0;
> + }
> +
> + if ((tcp_action & TCP_PUSH) || (payload_len > 0)) {
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Notify (action=%x, Seq=%d,Ack=%d,Pay%d)\n",
> + tcp_action, tcp_seq_num, tcp_ack_num, payload_len);
> +
> + action_and_state.s_addr = tcp_action;
> + (*tcp_packet_handler) ((uchar *)b + pkt_len - payload_len,
> + tcp_seq_num, action_and_state,
> + tcp_ack_num, payload_len);
> +
> + } else if (tcp_action != TCP_DATA) {
> + debug_cond(DEBUG_DEV_PKT,
> + "TCP Action (action=%x,Seq=%d,Ack=%d,Pay=%d)\n",
> + tcp_action, tcp_seq_num, tcp_ack_num, payload_len);
> +
> + /*
> + * Warning: Incoming Seq & Ack sequence numbers are transposed here
> + * to outgoing Seq & Ack sequence numbers
> + */
Fix indent.
> + net_send_tcp_packet(0, ntohs(b->ip.hdr.tcp_src),
> + ntohs(b->ip.hdr.tcp_dst),
> + (tcp_action & (~TCP_PUSH)),
> + tcp_seq_num, tcp_ack_num);
> + }
> +}
> --
> 2.11.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
More information about the U-Boot
mailing list