May 2018 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue May 1 01:44:31 UTC 2018
Ending: Thu May 31 22:37:17 UTC 2018
Messages: 3144

• [U-Boot] Beaglebone Black U-boot won't buid - THUMB instruction issue   Faiz Abbas
• [U-Boot] [PATCH 0/5] Add KConfig option for cache maintenance availability   Faiz Abbas
• [U-Boot] [BUG] SPI NOR for SST25V hangs for TI AM335x.   Faiz Abbas
• [U-Boot] [PATCH v3 5/5] mtd: nand: mxs_nand: add minimal ECC support   Stefan Agner
• [U-Boot] [PATCH v1 0/5] board: toradex: add Colibri iMX6ULL support   Stefan Agner
• [U-Boot] [PATCH v1 1/5] mtd: nand: mxs_nand: add device tree support for i.MX 6   Stefan Agner
• [U-Boot] [PATCH v1 2/5] imx: add macro to detect whether USB has been initialized   Stefan Agner
• [U-Boot] [PATCH v1 3/5] ARM: dts: imx6ull: use same compatible string as Linux is using   Stefan Agner
• [U-Boot] [PATCH v1 4/5] board: toradex: add new and upcoming SKUs   Stefan Agner
• [U-Boot] [PATCH v1 5/5] board: toradex: add Colibri iMX6ULL support   Stefan Agner
• [U-Boot] [PATCH v3 3/3] spi: mxs_spi: DM conversion   Gajjar Akash
• [U-Boot] [RFC] Exporting defaul environment   Kristian Amlie
• [U-Boot] [RFC] Exporting defaul environment   Kristian Amlie
• [U-Boot] [PATCH 1/4] riscv: cpu: nx25: Rename as ax25   Andes
• [U-Boot] [PATCH 2/4] board: nx25-ae250: Rename as ax25-ae350   Andes
• [U-Boot] [PATCH 3/4] configs: nx25-ae250:Rename as ax25-ae350   Andes
• [U-Boot] [PATCH 4/4] doc: ae250: Rename as ae350   Andes
• [U-Boot] [PATCH 1/3] configs: ax25-ae350: Set 64-bit as default configuration   Andes
• [U-Boot] [PATCH 2/3] spi: atcspi200: Fix compiler warning   Andes
• [U-Boot] [PATCH 3/3] net: ftmac100: Fix compiler warning   Andes
• [U-Boot] [PATCH 1/2] riscv: dts: Sync DT with Linux Kernel   Andes
• [U-Boot] [PATCH 2/2] mmc: ftsdc010_mci: Sync compatible with DT mmc node   Andes
• [U-Boot] [PATCH 1/4] configs: ax25-ae350: Support cfi flash   Andes
• [U-Boot] [PATCH 2/4] riscv: dts: Support cfi flash   Andes
• [U-Boot] [PATCH 3/4] board: ax25-ae350: Support cfi flash   Andes
• [U-Boot] [PATCH 4/4] mtd: ftsmc020: Drop unsed code   Andes
• [U-Boot] [PATCH] travis.yml: Support RISC-V 64-bit   Andes
• [U-Boot] [PATCH] arm64: dts: allwinner: h5: NanoPi NEO Plus2 : add EMAC support   Antony Antony
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Simon Baatz
• [U-Boot] [RFC] Exporting defaul environment   Stefano Babic
• [U-Boot] [PATCH v2 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support   Stefano Babic
• [U-Boot] [RFC] Exporting defaul environment   Stefano Babic
• [U-Boot] [PATCH v3 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support   Stefano Babic
• [U-Boot] [PATCH V6 0/2] Update sabrelite and nitrogen6x boards to use distro boot support   Stefano Babic
• [U-Boot] [PATCH] twister: Let SPL load U-Boot from MMC   Stefano Babic
• [U-Boot] [PATCH V6 0/2] Update sabrelite and nitrogen6x boards to use distro boot support   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] Beaglebone Black U-boot won't buid - THUMB instruction issue   John Babrick
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Marek Behun
• [U-Boot] [PATCH] phy: marvell: a3700: Fix compatible string for ehci   Marek Behún
• [U-Boot] [PATCH 0/4] Updates for Turris Mox   Marek Behún
• [U-Boot] [PATCH 1/4] phy: marvell: Support changing SERDES map in board file   Marek Behún
• [U-Boot] [PATCH 2/4] board: turris_mox: Change SERDES map depending on module topology   Marek Behún
• [U-Boot] [PATCH 3/4] board: turris_mox: Support differentiating SD version from eMMC   Marek Behún
• [U-Boot] [PATCH 4/4] board: turris_mox: Add gpio command to defconfig   Marek Behún
• [U-Boot] [PATCH] board: turris_mox: Add fixed regulator support to defconfig   Marek Behún
• [U-Boot] Exception Level switching seems broken on RK3399   Vicente Bergas
• [U-Boot] Exception Level switching seems broken on RK3399   Vicente Bergas
• [U-Boot] Exception Level switching seems broken on RK3399   Vicente Bergas
• [U-Boot] [BUG] SPI NOR for SST25V hangs for TI AM335x.   Gautam Bhat
• [U-Boot] [BUG] SPI NOR for SST25V hangs for TI AM335x.   Gautam Bhat
• [U-Boot] [BUG] SPI NOR for SST25V hangs for TI AM335x.   Gautam Bhat
• [U-Boot] Shared logging with u-boot and kernel.   Gautam Bhat
• [U-Boot] [PATCH] usb: xhci-rcar: deregister before deactivating clock   Matthias Blankertz
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Otto Blom
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Otto Blom
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Otto Blom
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Otto Blom
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Otto Blom
• [U-Boot] [RFC PATCH v1 0/5] Add fastboot UDP support   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 07/20] net: fastboot: Merge AOSP UDP fastboot   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 00/20] Add fastboot UDP support   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 09/20] fastboot: Refactor write_fb_response into fastboot_okay/fail/response   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 08/20] net: fastboot: Support building without MMC   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 11/20] fastboot: net: Change 'continue' so it matches USB fastboot   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 14/20] fastboot: Avoid re-parsing cmd_string for boot/reboot   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 15/20] fastboot: Merge boot common across USB and UDP   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 16/20] fastboot: net: Add NAND support   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 18/20] fastboot: Check if part_name is NULL before using it   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 19/20] fastboot: Add missing newlines   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 00/20] Add fastboot UDP support   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 16/20] fastboot: net: Add NAND support   Jocelyn Bohr
• [U-Boot] [RFC PATCH v2 16/20] fastboot: net: Add NAND support   Jocelyn Bohr
• [U-Boot] [PATCH v3 2/6] board: eets: pdu001: Fix wrong default value in Kconfig   Felix Brack
• [U-Boot] [RFC] arm: dts: am33xx: Sync DTS with Linux 4.16.11   Felix Brack
• [U-Boot] [PATCH 0/3] Enable mmc to write sparse images   Jassi Brar
• [U-Boot] [U-Boot,3/3] mmc: support writing sparse images   Jassi Brar
• [U-Boot] [PATCH v5 14/16] mmc: Separate "mmc swrite" from fastboot   Jassi Brar
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Boris Brezillon
• [U-Boot] [PATCH 0/3] Improvements for ARC UART   Alexey Brodkin
• [U-Boot] [PATCH 1/3] serial: Convert ARC_SERIAL to Kconfig   Alexey Brodkin
• [U-Boot] [PATCH 2/3] serial/serial_arc: Implement debug serial   Alexey Brodkin
• [U-Boot] [PATCH 3/3] ARC: Enable debug UART on nSIM boards   Alexey Brodkin
• [U-Boot] [PATCH] regmap: Separate memory-based operations   Alexey Brodkin
• [U-Boot] [uboot-snps-arc] [PATCH 0/3] Improvements for ARC UART   Alexey Brodkin
• [U-Boot] Please pull ARC changes   Alexey Brodkin
• [U-Boot] [PATCH] arm: Use mtune for Xscale   Alexey Brodkin
• [U-Boot] [PATCH] arm: Use mtune for Xscale   Alexey Brodkin
• [U-Boot] [PATCH] buildman: Add GCC 8.1.0 version to tools from kernel.org   Alexey Brodkin
• [U-Boot] [PATCH] regmap: Separate memory-based operations   Alexey Brodkin
• [U-Boot] [PATCH v2] board_f: Only reserve memory for U-Boot if we're going to relocate   Alexey Brodkin
• [U-Boot] [PATCH] MAINTAINERS: Add board/synopsys/   Alexey Brodkin
• [U-Boot] [PATCH 1/3] serial: Migrate CONFIG_ARC_SERIAL to Kconfig   Alexey Brodkin
• [U-Boot] [PATCH 3/3] serial: Migrate CONFIG_ARM_DCC to Kconfig   Alexey Brodkin
• [U-Boot] [PATCH 3/3] serial: Migrate CONFIG_ARM_DCC to Kconfig   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Cache: Don't compare I$ and D$ line lengths   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Make sure .ivt section is not purged by garbage collector   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Improve relocation fix-ups   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Move .ivt section to the very beginning of the image   Alexey Brodkin
• [U-Boot] [PATCH] regmap: Separate memory-based operations   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Use elf32-bigarc in case of -EB   Alexey Brodkin
• [U-Boot] [PATCH v2] ARC: Improve relocation fix-ups   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Reset: Use __builtin_arc_brk() instead of open-coded ASM   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Reset: Implement weak reset_cpu()   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Use elf32-bigarc in case of -EB   Alexey Brodkin
• [U-Boot] [PATCH] ARC: Add support for EM Development Kit board   Alexey Brodkin
• [U-Boot] Please pull ARC changes for v2018.07-rc1   Alexey Brodkin
• [U-Boot] [PATCH v1 06/11] spi: stm32_qspi: Update mode management   Patrice CHOTARD
• [U-Boot] [PATCH v2] phy: add support for STM32 usb phy controller   Patrice CHOTARD
• [U-Boot] [PATCH] stm32f429-disco: ram: Adds stm32f429-disco fixes for HardFault at booting   Patrice CHOTARD
• [U-Boot] [PATCH] stm32f429-disco: ram: Adds stm32f429-disco fixes for HardFault at booting   Patrice CHOTARD
• [U-Boot] [PATCH v2] phy: add support for STM32 usb phy controller   Patrice CHOTARD
• [U-Boot] [PATCH v2] ram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at booting   Patrice CHOTARD
• [U-Boot] [PATCH v1 3/5] dm: serial: Add setparity   Patrice CHOTARD
• [U-Boot] [PATCH v1 1/5] serial: stm32: Add debug uart support   Patrice CHOTARD
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Patrice CHOTARD
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Patrice CHOTARD
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Patrice CHOTARD
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Patrice CHOTARD
• [U-Boot] [U-Boot,v1,3/5] dm: serial: Add setparity   Patrice CHOTARD
• [U-Boot] [PATCH] arm, imx6: add support for SD/MMC Manufacture Mode   Jay Carlson
• [U-Boot] [PATCH] arm, imx6: fix NOR/OneNAND boot mode mix-up   Jay Carlson
• [U-Boot] [PATCH v2] arm, imx6: add support for SD/MMC Manufacture Mode   Jay Carlson
• [U-Boot] [PATCH v2] arm, imx6: fix NOR/OneNAND boot mode mix-up   Jay Carlson
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   Vagrant Cascadian
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   Vagrant Cascadian
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   Vagrant Cascadian
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   Vagrant Cascadian
• [U-Boot] u-boot-rockchip: firefly-rk3288 hangs on: Loading Environment from MMC   Vagrant Cascadian
• [U-Boot] [PATCH v1] rockchip: utilize CONFIG_DEFAULT_FDT_FILE   Vagrant Cascadian
• [U-Boot] [PATCH] arm64: zynqmp: accept an absolute path for PMUFW_INIT_FILE   Luca Ceresoli
• [U-Boot] [PATCH] arm64: zynqmp: accept an absolute path for PMUFW_INIT_FILE   Luca Ceresoli
• [U-Boot] [PATCH 1/3] doc: Add new doc for file system firmware loader driver model   Chee, Tien Fong
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Chee, Tien Fong
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Chee, Tien Fong
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Chee, Tien Fong
• [U-Boot] [PATCH 1/3] doc: Add new doc for file system firmware loader driver model   Chee, Tien Fong
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Chee, Tien Fong
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Chee, Tien Fong
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   Rick Chen
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   Rick Chen
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   Rick Chen
• [U-Boot] NDS32 toolchain?   Rick Chen
• [U-Boot] NDS32 toolchain?   Rick Chen
• [U-Boot] [PATCH] Kconfig: Add dependency on HASH to verified boot   Kelvin Cheung
• [U-Boot] [PATCH] common: image-fit: add FIT data-position & data-offset property support   Kelvin Cheung
• [U-Boot] [PATCH] common: image-fit: add FIT data-position & data-offset property support   Kelvin Cheung
• [U-Boot] [PATCH v2] add FIT data-position & data-offset property support   Kelvin Cheung
• [U-Boot] [PATCH v3] add FIT data-position & data-offset property support   Kelvin Cheung
• [U-Boot] [PATCH v2] add FIT data-position & data-offset property support   Kelvin Cheung
• [U-Boot] [PATCH v2 00/10] Update STM32 QSPI driver   Patrice Chotard
• [U-Boot] [PATCH v2 01/10] spi: stm32_qspi: Remove CONFIG_CLK flag   Patrice Chotard
• [U-Boot] [PATCH v2 02/10] spi: stm32_qspi: Solve issue detected by checkpatch   Patrice Chotard
• [U-Boot] [PATCH v2 03/10] spi: stm32_qspi: Sort include files alphabetically   Patrice Chotard
• [U-Boot] [PATCH v2 04/10] spi: stm32_qspi: Align reg-names with kernel 4.12 RC1   Patrice Chotard
• [U-Boot] [PATCH v2 05/10] spi: stm32_qspi: Add st, stm32f469-qspi compatible string   Patrice Chotard
• [U-Boot] [PATCH v2 06/10] spi: stm32_qspi: Add chip select management   Patrice Chotard
• [U-Boot] [PATCH v2 07/10] spi: stm32_qspi: Use dev_read_xxx API   Patrice Chotard
• [U-Boot] [PATCH v2 08/10] spi: stm32_qspi: Add reset support   Patrice Chotard
• [U-Boot] [PATCH v2 09/10] ARM: dts: stm32: Add quadspi reset for stm32f746   Patrice Chotard
• [U-Boot] [PATCH v2 10/10] ARM: dts: stm32: Update qspi bindings for stm32f746   Patrice Chotard
• [U-Boot] [PATCH v1 0/5] Update STM32 serial driver   Patrice Chotard
• [U-Boot] [PATCH v1 1/5] serial: stm32: Add debug uart support   Patrice Chotard
• [U-Boot] [PATCH v1 2/5] serial: stm32: Fix bits defines name   Patrice Chotard
• [U-Boot] [PATCH v1 3/5] dm: serial: Add setparity   Patrice Chotard
• [U-Boot] [PATCH v1 4/5] serial: stm32: Add setparity support   Patrice Chotard
• [U-Boot] [PATCH v1 5/5] stm32mp1: Allow to activate CONFIG_DEBUG_UART   Patrice Chotard
• [U-Boot] [PATCH v1 0/4] Update STM32MP1 machine   Patrice Chotard
• [U-Boot] [PATCH v1 1/4] stm32mp1: remove the second TAMP_BOOT_CONTEXT update   Patrice Chotard
• [U-Boot] [PATCH v1 2/4] stm32mp1: add bsec driver   Patrice Chotard
• [U-Boot] [PATCH v1 3/4] stm32mp1: add FUSE command support   Patrice Chotard
• [U-Boot] [PATCH v1 4/4] stm32mp1: use OTP to configure MAC address and serial number   Patrice Chotard
• [U-Boot] [PATCH] mmc: stm32_sdmmc2: Fix stm32_sdmmc2_start_cmd()   Patrice Chotard
• [U-Boot] [PATCH] ubi: fastmap: Implement produce_free_peb()   Patrice Chotard
• [U-Boot] [PATCH] mach-stm32: Enable SPL_RESET_SUPPORT flag   Patrice Chotard
• [U-Boot] [PATCH] power: regulator: denied disable on always-on regulator   Patrice Chotard
• [U-Boot] Support for the Raspberry Pi 3B+?   Qwerty Chouskie
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP   Jaehoon Chung
• [U-Boot] mainline u-boot on radxarock (rockchip rk3188) from SDcard   Jaehoon Chung
• [U-Boot] mainline u-boot on radxarock (rockchip rk3188) from SDcard   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [U-Boot-DM] QUERY:U-boot DM:SERIAL:Multiple On-chip UART Controller Support   Andreas Dannenberg
• [U-Boot] Need suggestion on device driver project ideas   Anupam Datta
• [U-Boot] [PATCH v2] arm: ti: boot: Extract PARTS_DEFAULT to boot.h   Andrew F. Davis
• [U-Boot] RFC: Alternative boot_jump_linux() function   Nicolas Dechesne
• [U-Boot] GCC 7.x vs. C++ comments   Wolfgang Denk
• [U-Boot] GCC 7.x vs. C++ comments   Wolfgang Denk
• [U-Boot] GCC 7.x vs. C++ comments   Wolfgang Denk
• [U-Boot] GCC 7.x vs. C++ comments   Wolfgang Denk
• [U-Boot] GCC 7.x vs. C++ comments   Wolfgang Denk
• [U-Boot] Appended DTB Android boot image support   Alex Deymo
• [U-Boot] [PATCH v2 2/2] cmd: Add dtimg command   Alex Deymo
• [U-Boot] [PATCH v2 1/2] common: Add support for Android DT image   Alex Deymo
• [U-Boot] [U-Boot, v2, 1/2] common: Add support for Android DT image   Alex Deymo
• [U-Boot] FYI: Android bootloader flow documentation published   Alex Deymo
• [U-Boot] [PATCH] Import Android's dt_table.h for DT image format   Alex Deymo
• [U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option   Angelo Dureghello
• [U-Boot] [PATCH v2 2/2] drivers: spi: migrate cf_spi to DM   Angelo Dureghello
• [U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option   Angelo Dureghello
• [U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option   Angelo Dureghello
• [U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option   Angelo Dureghello
• [U-Boot] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC   Wadim Egorov
• [U-Boot] [PATCH v2] arm: zynq: Add initial support for Avnet MiniZed   Ibai Erkiaga Elorza
• [U-Boot] [PATCH v2] arm: zynq: Add initial support for Avnet MiniZed   Ibai Erkiaga
• [U-Boot] [PATCH] arm: zynq: Add initial support for Avnet MiniZed   Ibai Erkiaga
• [U-Boot] [PATCH] arm: zynq: Add initial support for Avnet MiniZed   Ibai Erkiaga
• [U-Boot] [PATCH v3] arm: zynq: Add initial support for Avnet MiniZed   Ibai Erkiaga
• [U-Boot] [PATCH] MAINTAINERS: Switch to Alison's nxp.com address   Fabio Estevam
• [U-Boot] [PATCH v2] MAINTAINERS: Switch nxp.com domain   Fabio Estevam
• [U-Boot] [PATCH] MAINTAINERS: Switch to Alison's nxp.com address   Fabio Estevam
• [U-Boot] u-boot 2018 SPI SPL   Fabio Estevam
• [U-Boot] [PATCH 1/2] p1022ds: Change Timur's email address   Fabio Estevam
• [U-Boot] [PATCH 2/2] board/freescale: Remove invalid fsl email addresses   Fabio Estevam
• [U-Boot] [PATCH v2 08/11] sandbox: Enable support for MC34708 PMIC in DTS   Fabio Estevam
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Fabio Estevam
• [U-Boot] [PATCH 2/2] SPDX: Convert all of our multiple license tags to Linux Kernel style   Fabio Estevam
• [U-Boot] [PATCH 2/2] SPDX: Convert all of our multiple license tags to Linux Kernel style   Fabio Estevam
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Fabio Estevam
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Fabio Estevam
• [U-Boot] [PATCH 1/1] tools/file2include: create Linux style SPDX header   Fabio Estevam
• [U-Boot] [PATCH] imx: Enable ACTLR.SMP bit for all i.MX cortex-a7 platforms   Fabio Estevam
• [U-Boot] spi(u-boot)+MMC(Kernel)   Fabio Estevam
• [U-Boot] [PATCH V3 1/2] mmc: add HS400 support   Fabio Estevam
• [U-Boot] SPDX header on .h files   Fabio Estevam
• [U-Boot] [RFC PATCH 0/2] ARM: v7: Enable basic framework for supporting bits for CVE-2017-5715   Fabio Estevam
• [U-Boot] [PATCH 1/1] board: arm: Add support for Broadcom BCM7445D0   Florian Fainelli
• [U-Boot] [PATCH 1/1] board: arm: Add support for Broadcom BCM7445D0   Florian Fainelli
• [U-Boot] [U-Boot,V2] imx: mx7: psci: add system reset support   Peng Fan
• [U-Boot] [U-Boot,V2] imx: mx7: psci: add system reset support   Peng Fan
• [U-Boot] [U-Boot,V2] imx: mx7: psci: add system reset support   Peng Fan
• [U-Boot] [PATCH V3 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH V3 2/2] mmc: fsl_esdhc: enable HS400 feature   Peng Fan
• [U-Boot] [PATCH V3 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH 00/41] imx: add i.MX8QXP support   Peng Fan
• [U-Boot] [PATCH 01/41] imx: import SCFW API   Peng Fan
• [U-Boot] [PATCH 02/41] imx: add Kconfig entry for i.MX8   Peng Fan
• [U-Boot] [PATCH 03/41] arm: build mach-imx for i.MX8   Peng Fan
• [U-Boot] [PATCH 04/41] imx8: add IPC communication support between ACore and SCU   Peng Fan
• [U-Boot] [PATCH 05/41] arm: global_data: introduce ipc_channel_handle   Peng Fan
• [U-Boot] [PATCH 06/41] imx: boot_mode: Add FLEXSPI boot entry   Peng Fan
• [U-Boot] [PATCH 07/41] imx8: add imx-regs header file   Peng Fan
• [U-Boot] [PATCH 08/41] imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined   Peng Fan
• [U-Boot] [PATCH 09/41] imx: add i.MX8 cpu type   Peng Fan
• [U-Boot] [PATCH 10/41] imx8: add basic cpu support   Peng Fan
• [U-Boot] [PATCH 11/41] imx8: add boot device detection   Peng Fan
• [U-Boot] [PATCH 12/41] imx8: implement mmc_get_env_dev   Peng Fan
• [U-Boot] [PATCH 13/41] imx8: implement imx_get_mac_from_fuse   Peng Fan
• [U-Boot] [PATCH 14/41] imx8: implement get_board_serial   Peng Fan
• [U-Boot] [PATCH 15/41] imx8: add mmu and dram related functiions   Peng Fan
• [U-Boot] [PATCH 16/41] imx8: add bootaux support   Peng Fan
• [U-Boot] [PATCH 17/41] imx8: add arch_cpu_init   Peng Fan
• [U-Boot] [PATCH 18/41] imx8: add clock driver   Peng Fan
• [U-Boot] [PATCH 19/41] imx8: add iomux configuration code   Peng Fan
• [U-Boot] [PATCH 20/41] fsl_esdhc: Update usdhc driver to support i.MX8   Peng Fan
• [U-Boot] [PATCH 21/41] serial_lpuart: Update lpuart driver to support i.MX8   Peng Fan
• [U-Boot] [PATCH 22/41] serial: lpuart: Enable RX and TX FIFO   Peng Fan
• [U-Boot] [PATCH 23/41] imx_lpi2c: Update lpi2c driver to support imx8   Peng Fan
• [U-Boot] [PATCH 24/41] imx: lpi2c: fix clock issue when NACK detected   Peng Fan
• [U-Boot] [PATCH 25/41] lpi2c: Fix bus stop problem in xfer   Peng Fan
• [U-Boot] [PATCH 26/41] lpi2c: Add bus busy error handling   Peng Fan
• [U-Boot] [PATCH 27/41] net: fec: do not access reserved register for i.MX8   Peng Fan
• [U-Boot] [PATCH 28/41] net: fec_mxc: Add the init_clk_fec function   Peng Fan
• [U-Boot] [PATCH 29/41] sata: Add i.MX8 SATA support   Peng Fan
• [U-Boot] [PATCH 30/41] gpio: mxc_gpio: add support for i.MX8   Peng Fan
• [U-Boot] [PATCH 31/41] pinctrl: Add pinctrl driver for i.MX8   Peng Fan
• [U-Boot] [PATCH 32/41] power: Add power domain driver for i.MX8   Peng Fan
• [U-Boot] [PATCH 33/41] power: Add PD device lookup interface to power domain uclass   Peng Fan
• [U-Boot] [PATCH 34/41] power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined   Peng Fan
• [U-Boot] [PATCH 35/41] dm: core: device: enable power domain in probe   Peng Fan
• [U-Boot] [PATCH 36/41] drivers: regulator: fixed: add off-on-delay-us   Peng Fan
• [U-Boot] [PATCH 37/41] mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue   Peng Fan
• [U-Boot] [PATCH 38/41] log: include command header file   Peng Fan
• [U-Boot] [PATCH 39/41] i2c-mux: pca954x: support pca9646 i2c switch   Peng Fan
• [U-Boot] [PATCH 40/41] dts: imx8qxp: Add DTS and binding header files   Peng Fan
• [U-Boot] [PATCH 41/41] imx: 8qxp_mek: Add i.MX8QXP MEK board support   Peng Fan
• [U-Boot] [PATCH 37/41] mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue   Peng Fan
• [U-Boot] [PATCH 0/1] board: arm: Add support for Broadcom BCM7445D0   Thomas Fitzsimmons
• [U-Boot] [PATCH 1/1] board: arm: Add support for Broadcom BCM7445D0   Thomas Fitzsimmons
• [U-Boot] [PATCH 1/1] board: arm: Add support for Broadcom BCM7445D0   Thomas Fitzsimmons
• [U-Boot] [PATCH 1/1] board: arm: Add support for Broadcom BCM7445D0   Thomas Fitzsimmons
• [U-Boot] [PATCH v2 0/1] board: arm: Add support for Broadcom BCM7445   Thomas Fitzsimmons
• [U-Boot] [PATCH v2 1/1] board: arm: Add support for Broadcom BCM7445   Thomas Fitzsimmons
• [U-Boot] initialization to TI AM335x MII connected to Marvell's 88e6341 switch   Avner Flesch
• [U-Boot] Initialization of TI AM335x MII connected to Marvell's 88e6341 switch   Avner Flesch
• [U-Boot] Appended DTB Android boot image support   Ramon Fried
• [U-Boot] Appended DTB Android boot image support   Ramon Fried
• [U-Boot] Appended DTB Android boot image support   Ramon Fried
• [U-Boot] [PATCH 0/7] *** Qualcomm Snapdraon serial fixes***   Ramon Fried
• [U-Boot] [PATCH 1/7] db820c: set clk node to be probed before relocation   Ramon Fried
• [U-Boot] [PATCH 2/7] serial: serial_msm: fail probe if settings clocks fails   Ramon Fried
• [U-Boot] [PATCH 3/7] serial: serial_msm: initialize uart only before relocation   Ramon Fried
• [U-Boot] [PATCH 4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Ramon Fried
• [U-Boot] [PATCH 6/7] db410: added pinctrl node and serial bindings   Ramon Fried
• [U-Boot] [PATCH 7/7] serial: serial_msm: added pinmux & config   Ramon Fried
• [U-Boot] [PATCH 1/7] db820c: set clk node to be probed before relocation   Ramon Fried
• [U-Boot] [PATCH 2/7] serial: serial_msm: fail probe if settings clocks fails   Ramon Fried
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Ramon Fried
• [U-Boot] [PATCH] mmc: sdhci: Check that ops are defined   Ramon Fried
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Ramon Fried
• [U-Boot] [PATCH] image: fit: Allow booting Aarch64 from arm   Ramon Fried
• [U-Boot] [PATCH] image.h Allow booting Aarch64 from arm   Ramon Fried
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Ramon Fried
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Ramon Fried
• [U-Boot] [PATCH v2 1/7] db820c: set clk node to be probed before relocation   Ramon Fried
• [U-Boot] [PATCH v2 2/7] serial: serial_msm: fail probe if settings clocks fails   Ramon Fried
• [U-Boot] [PATCH v2 3/7] serial: serial_msm: initialize uart only before relocation   Ramon Fried
• [U-Boot] [PATCH v2 4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [PATCH v2 5/7] mach-snapdragon: Introduce pinctrl driver   Ramon Fried
• [U-Boot] [PATCH v2 6/7] db410: added pinctrl node and serial bindings   Ramon Fried
• [U-Boot] [PATCH v2 7/7] serial: serial_msm: added pinmux & config   Ramon Fried
• [U-Boot] RFC: Alternative boot_jump_linux() function   Ramon Fried
• [U-Boot] RFC: Alternative boot_jump_linux() function   Ramon Fried
• [U-Boot] RFC: Alternative boot_jump_linux() function   Ramon Fried
• [U-Boot] [PATCH] ehci: msm: Replace board_prepare_usb with board_usb_init   Ramon Fried
• [U-Boot] [PATCH v2] ehci: Replace board_prepare_usb with board_usb_init   Ramon Fried
• [U-Boot] [PATCH v2] ehci: Replace board_prepare_usb with board_usb_init   Ramon Fried
• [U-Boot] [PATCH] dm: usb: setup ehci gadget before usb is probed   Ramon Fried
• [U-Boot] [PATCH] dm: usb: setup ehci gadget before usb is probed   Ramon Fried
• [U-Boot] iotrace examine buffer command   Ramon Fried
• [U-Boot] iotrace examine buffer command   Ramon Fried
• [U-Boot] [PATCH] ehci: msm: Replace board_prepare_usb with board_usb_init   Ramon Fried
• [U-Boot] RFC: Alternative boot_jump_linux() function   Ramon Fried
• [U-Boot] [PATCH 0/5] Iotrace improvements   Ramon Fried
• [U-Boot] [PATCH 1/5] cmd: iotrace: add set region command   Ramon Fried
• [U-Boot] [PATCH 2/5] iotrace: add IO region limit   Ramon Fried
• [U-Boot] [PATCH 3/5] common: iotrace: add timestamp to iotrace records   Ramon Fried
• [U-Boot] [PATCH 4/5] iotrace: move record definitons to header file   Ramon Fried
• [U-Boot] [PATCH 5/5] cmd: iotrace: add dump trace command   Ramon Fried
• [U-Boot] [PATCH v2 0/6] Iotrace improvements   Ramon Fried
• [U-Boot] [PATCH 1/6] cmd: iotrace: add set region command   Ramon Fried
• [U-Boot] [PATCH 2/6] iotrace: add IO region limit   Ramon Fried
• [U-Boot] [PATCH 3/6] common: iotrace: add timestamp to iotrace records   Ramon Fried
• [U-Boot] [PATCH 4/6] iotrace: move record definitons to header file   Ramon Fried
• [U-Boot] [PATCH v2 5/6] cmd: iotrace: add dump trace command   Ramon Fried
• [U-Boot] [PATCH 6/6] common: iotrace: fix behaviour when buffer is full   Ramon Fried
• [U-Boot] RFC: Alternative boot_jump_linux() function   Ramon Fried
• [U-Boot] RFC: Alternative boot_jump_linux() function   Ramon Fried
• [U-Boot] [PATCH 3/6] common: iotrace: add timestamp to iotrace records   Ramon Fried
• [U-Boot] [PATCH 6/6] common: iotrace: fix behaviour when buffer is full   Ramon Fried
• [U-Boot] [PATCH v2 3/6] common: iotrace: add timestamp to iotrace records   Ramon Fried
• [U-Boot] [PATCH 6/6] common: iotrace: fix behaviour when buffer is full   Ramon Fried
• [U-Boot] [PATCH] bug.h: introduce WARN_ONCE   Ramon Fried
• [U-Boot] [PATCH] mach-snapdragon: increase size of malloc pool   Ramon Fried
• [U-Boot] [PATCH v3 0/6] Iotrace improvements   Ramon Fried
• [U-Boot] [PATCH 1/6] cmd: iotrace: add set region command   Ramon Fried
• [U-Boot] [PATCH 2/6] iotrace: add IO region limit   Ramon Fried
• [U-Boot] [PATCH 3/6] common: iotrace: add timestamp to iotrace records   Ramon Fried
• [U-Boot] [PATCH 4/6] iotrace: move record definitons to header file   Ramon Fried
• [U-Boot] [PATCH v2 5/6] cmd: iotrace: add dump trace command   Ramon Fried
• [U-Boot] [PATCH v2 6/6] iotrace: fix behaviour when buffer is full   Ramon Fried
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [PATCH v2] mach-snapdragon: increase size of malloc pool   Ramon Fried
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Ramon Fried
• [U-Boot] [PATCH] db820c: add dummy clock for uart node   Ramon Fried
• [U-Boot] [PATCH] bug.h: introduce WARN_ONCE   Ramon Fried
• [U-Boot] [PATCH v3 6/6] iotrace: fix behaviour when buffer is full   Ramon Fried
• [U-Boot] [PATCH v2] bug.h: introduce WARN_ONCE   Ramon Fried
• [U-Boot] [PATCH v3 0/6] Iotrace improvements   Ramon Fried
• [U-Boot] [PATCH v4 0/6] Iotrace improvements   Ramon Fried
• [U-Boot] [PATCH v4 1/6] cmd: iotrace: add set region command   Ramon Fried
• [U-Boot] [PATCH v4 2/6] iotrace: add IO region limit   Ramon Fried
• [U-Boot] [PATCH v4 3/6] common: iotrace: add timestamp to iotrace records   Ramon Fried
• [U-Boot] [PATCH v4 4/6] iotrace: move record definitons to header file   Ramon Fried
• [U-Boot] [PATCH v4 5/6] cmd: iotrace: add dump trace command   Ramon Fried
• [U-Boot] [PATCH v4 6/6] iotrace: fix behaviour when buffer is full   Ramon Fried
• [U-Boot] [PATCH v4 6/6] iotrace: fix behaviour when buffer is full   Ramon Fried
• [U-Boot] [PATCH] db410c: Added pre-relocation attribute to pinctrl   Ramon Fried
• [U-Boot] [PATCH] MAINTAINERS: Take over DB410c maintainership   Ramon Fried
• [U-Boot] [mips, usb xhci] Question / advice needed: cacheable adresses as a device output buffers?   Yuri Frolov
• [U-Boot] [PATCH v2 1/3] spi: sh_qspi: full DM conversion   Akash Gajjar
• [U-Boot] [PATCH v2 2/3] spi: sh_spi: full DM conversion   Akash Gajjar
• [U-Boot] [PATCH v2 3/3] spi: mxs_spi: full dm conversion   Akash Gajjar
• [U-Boot] [PATCH v1 1/1] spi: lpc32xx_ssp: DM conversion   Akash Gajjar
• [U-Boot] [PATCH v3 1/3] spi: sh_qspi: DM conversion   Akash Gajjar
• [U-Boot] [PATCH v3 2/3] spi: sh_spi: DM conversion   Akash Gajjar
• [U-Boot] [PATCH v3 3/3] spi: mxs_spi: DM conversion   Akash Gajjar
• [U-Boot] [PATCH v3 3/3] spi: mxs_spi: DM conversion   Akash Gajjar
• [U-Boot] [v2] net/phy/cortina: Add support for CS4223 PHY   Vicentiu Galanopulo
• [U-Boot] [PATCH V6 0/2] Update sabrelite and nitrogen6x boards to use distro boot support   Guillaume Gardet
• [U-Boot] [U-Boot, BUG] snow: mmc: SD card access broken: unable to select a mode   Guillaume Gardet
• [U-Boot] [For knowledge-sake] Understanding of couple of things under the hood   Ajay Garg
• [U-Boot] [Xen-devel] [For knowledge-sake] Understanding of couple of things under the hood   Ajay Garg
• [U-Boot] [PATCH v2] driver: net: fsl-mc: updated copyright info   Yogesh Gaur
• [U-Boot] [PATCH] driver: net: fsl-mc: updated copyright info   Yogesh Narayan Gaur
• [U-Boot] [PATCH][v2] mtd: nand: fsl_ifc: Fix nand waitfunc return value   Jagdish Gediya
• [U-Boot] [PATCH][v3] mtd: nand: fsl_ifc: Fix nand waitfunc return value   Jagdish Gediya
• [U-Boot] [PATCH] arm: ls1021aqds: config: enable CONFIG_ID_EEPROM for mac command   Jagdish Gediya
• [U-Boot] [PATCH] armv8: ls1088a: change dpl load command from apply to lazyapply.   Jagdish Gediya
• [U-Boot] [RFC] arm: mvebu: Add Helios4 Armada 38x initial support   Dennis Gilmore
• [U-Boot] [PATCH] bootm.c: Correct the flush_len used in bootm_load_os()   Simon Glass
• [U-Boot] [RFC] Exporting defaul environment   Simon Glass
• [U-Boot] [PATCH v4] arm64: Add SMC and HVC commands   Simon Glass
• [U-Boot] [PATCH v3 02/25] tpm: prepare introduction of TPMv2.x support in Kconfig   Simon Glass
• [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification   Simon Glass
• [U-Boot] [PATCH v3 03/25] tpm: disociate TPMv1.x specific and generic code   Simon Glass
• [U-Boot] [PATCH v3 04/25] tpm: prepare support for TPMv2.x commands   Simon Glass
• [U-Boot] [PATCH v3 05/25] tpm: add macros to enhance TPM commands readability   Simon Glass
• [U-Boot] [PATCH v3 07/25] tpm: report driver error code to upper layer   Simon Glass
• [U-Boot] [PATCH v3 08/25] tpm: add TPM2_Startup command support   Simon Glass
• [U-Boot] [PATCH v3 09/25] tpm: add TPM2_SelfTest command support   Simon Glass
• [U-Boot] [PATCH v3 10/25] tpm: add TPM2_Clear command support   Simon Glass
• [U-Boot] [PATCH v3 11/25] tpm: add TPM2_PCR_Extend command support   Simon Glass
• [U-Boot] [PATCH v3 12/25] tpm: add TPM2_PCR_Read command support   Simon Glass
• [U-Boot] [PATCH v3 13/25] tpm: add TPM2_GetCapability command support   Simon Glass
• [U-Boot] [PATCH v3 14/25] tpm: add dictionary attack mitigation commands support   Simon Glass
• [U-Boot] [PATCH v3 15/25] tpm: add TPM2_HierarchyChangeAuth command support   Simon Glass
• [U-Boot] [PATCH v3 16/25] tpm: add PCR authentication commands support   Simon Glass
• [U-Boot] [PATCH v3 17/25] tpm: add support for TPMv2.x SPI modules   Simon Glass
• [U-Boot] [PATCH v3 18/25] tpm: add the possibility to reset the chip with a gpio   Simon Glass
• [U-Boot] [PATCH v3 19/25] doc: device-tree-bindings: add ST33TPHF20 TPMv2.0 module info   Simon Glass
• [U-Boot] [PATCH v3 20/25] test/py: add TPMv2.x test suite   Simon Glass
• [U-Boot] [PATCH v3 21/25] tpm: add a Sandbox TPMv2.x driver   Simon Glass
• [U-Boot] [PATCH v3 22/25] doc: device-tree-bindings: add Sandbox TPMv2.0 module info   Simon Glass
• [U-Boot] [PATCH v3 23/25] sandbox: dts: add Sandbox TPMv2.x node   Simon Glass
• [U-Boot] [PATCH v3 24/25] configs: add TPMv2.x support in Sandbox   Simon Glass
• [U-Boot] [PATCH v3 25/25] tpm: allow Sandbox to run TPMv2.x commands   Simon Glass
• [U-Boot] [PATCH v2 2/4] test: Add tests for DT-manipulation functions   Simon Glass
• [U-Boot] [PATCH v2 3/4] core: Add dev_{disable,enable}_by_path   Simon Glass
• [U-Boot] [PATCH v2 4/4] test: Add tests for dev_{enable, disable}_by_path   Simon Glass
• [U-Boot] [PATCH v2] gdsys: drivers: Add gdsys_rxaui_ctrl driver   Simon Glass
• [U-Boot] [PATCH v2 2/5] regmap: Support reading from specific range   Simon Glass
• [U-Boot] [PATCH v2 3/5] regmap: Define regmap_{get,set}   Simon Glass
• [U-Boot] [PATCH v2 1/3] drivers: Add board uclass   Simon Glass
• [U-Boot] [PATCH v2 01/10] ram: Add driver for MPC83xx   Simon Glass
• [U-Boot] [PATCH v2 02/10] sysreset: Add get_status method   Simon Glass
• [U-Boot] [PATCH v2 03/10] board_f: Add reset status printing   Simon Glass
• [U-Boot] [PATCH v2 04/10] mpc83xx: Add sysreset driver   Simon Glass
• [U-Boot] [PATCH v2 07/10] common: board_f: Sort includes   Simon Glass
• [U-Boot] [PATCH v2] reset: Add generic GPIO reset driver   Simon Glass
• [U-Boot] [PATCH v2 11/19] tpm: add TPM2_Clear command support   Simon Glass
• [U-Boot] [RFC] Exporting defaul environment   Simon Glass
• [U-Boot] [PATCH v2 2/3] mpc83xx/pci: Register IMMR region   Simon Glass
• [U-Boot] [PATCH v2 1/2] misc: uclass: Add enable/disable function   Simon Glass
• [U-Boot] BUG: cannot boot with CONFIG_LOG   Simon Glass
• [U-Boot] Booting Jerry chromebook from eMMC   Simon Glass
• [U-Boot] [PATCH v2] reset: Add generic GPIO reset driver   Simon Glass
• [U-Boot] [PATCH 3/5] api: Flush cache when closing api   Simon Glass
• [U-Boot] [PATCH v2 1/4] core: Add functions to set properties in live-tree   Simon Glass
• [U-Boot] [PATCH v2 01/10] ram: Add driver for MPC83xx   Simon Glass
• [U-Boot] [PATCH v2 2/3] mpc83xx/pci: Register IMMR region   Simon Glass
• [U-Boot] [PATCH v2 1/2] misc: uclass: Add enable/disable function   Simon Glass
• [U-Boot] Appended DTB Android boot image support   Simon Glass
• [U-Boot] [PATCH v4 03/11] syscon: dm: Add a new method to get a regmap from DTS   Simon Glass
• [U-Boot] [PATCH v5 1/9] syscon: dm: Add a new method to get a regmap from DTS   Simon Glass
• [U-Boot] [PATCH v4] arm64: Add SMC and HVC commands   Simon Glass
• [U-Boot] net: [PATCH v10 3/3] Adding wget   Simon Glass
• [U-Boot] [PATCH 2/7] serial: serial_msm: fail probe if settings clocks fails   Simon Glass
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Simon Glass
• [U-Boot] [PATCH 1/7] db820c: set clk node to be probed before relocation   Simon Glass
• [U-Boot] [PATCH 3/7] serial: serial_msm: initialize uart only before relocation   Simon Glass
• [U-Boot] [PATCH 6/7] db410: added pinctrl node and serial bindings   Simon Glass
• [U-Boot] [PATCH 7/7] serial: serial_msm: added pinmux & config   Simon Glass
• [U-Boot] [PATCH v2 3/6] scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9   Simon Glass
• [U-Boot] [PATCH v2 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Simon Glass
• [U-Boot] [PATCH v2 6/6] sandbox: dts: test: Fix wrong aliases property names   Simon Glass
• [U-Boot] [PATCH v2] timer: Add Cadence TTC timer counter support   Simon Glass
• [U-Boot] [PATCH v3 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Simon Glass
• [U-Boot] [PATCH v3 3/3] net: designware: Add reset ctrl to driver   Simon Glass
• [U-Boot] [PATCH v2 02/11] pmic: fsl: Define number of bytes sent at once by MC34708 PMIC   Simon Glass
• [U-Boot] [PATCH v2 03/11] pmic: Add support for setting transmission length in uclass private data   Simon Glass
• [U-Boot] [PATCH v2 04/11] pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions   Simon Glass
• [U-Boot] [PATCH v2 05/11] pmic: dm: Add support for MC34708 for PMIC DM   Simon Glass
• [U-Boot] [PATCH v2 06/11] pmic: Rewrite the pmic command to not only work with single byte transmission   Simon Glass
• [U-Boot] [PATCH v2 07/11] sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission   Simon Glass
• [U-Boot] [PATCH v2 09/11] sandbox: Enable MC34708 PMIC support   Simon Glass
• [U-Boot] [PATCH v2 08/11] sandbox: Enable support for MC34708 PMIC in DTS   Simon Glass
• [U-Boot] [PATCH v2 10/11] sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c   Simon Glass
• [U-Boot] [PATCH v2 11/11] sandbox: tests: Add tests for mc34708 PMIC device   Simon Glass
• [U-Boot] [PATCH 1/3] fit: Fix CONFIG_FIT_SPL_PRINT   Simon Glass
• [U-Boot] [PATCH 2/3] fit: Add empty fit_print_contents() and fit_image_print()   Simon Glass
• [U-Boot] [PATCH 3/3] fit: Add standalone image type handling   Simon Glass
• [U-Boot] [PATCH] spl: Add full fitImage support   Simon Glass
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Simon Glass
• [U-Boot] [PATCH] spl: Add full fitImage support   Simon Glass
• [U-Boot] net: [PATCH v10 3/3] Adding wget   Simon Glass
• [U-Boot] [PATCH 1/3] PCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set   Simon Glass
• [U-Boot] [PATCH 2/3] ARM: qemu-arm: Bump RAM size in AArch64 MMU table   Simon Glass
• [U-Boot] [PATCH 3/3] doc: qemu-arm: Drop highmem=off references   Simon Glass
• [U-Boot] [PATCH v2 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Simon Glass
• [U-Boot] [PATCH v3 07/13] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME   Simon Glass
• [U-Boot] [PATCH v3 08/13] fastboot: Fix parameter types in _fb_nand_write   Simon Glass
• [U-Boot] [PATCH v3 09/13] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag   Simon Glass
• [U-Boot] [PATCH v3 10/13] fastboot: Extract common definitions from USB fastboot   Simon Glass
• [U-Boot] [PATCH v3 11/13] ti: fastboot: Move weak overrides to board files   Simon Glass
• [U-Boot] [PATCH v3 12/13] fs: Add fs_get_type_name to return current filesystem name   Simon Glass
• [U-Boot] [PATCH v3 13/13] net: fastboot: Merge AOSP UDP fastboot   Simon Glass
• [U-Boot] [PATCH 1/2] PCI: Add newlines to debug prints in pci_auto_common.c   Simon Glass
• [U-Boot] [PATCH 2/2] PCI: autoconfig: Don't allocate 64-bit addresses to 32-bit only resources   Simon Glass
• [U-Boot] arm: Raspberry Pi Compile warnings   Simon Glass
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Simon Glass
• [U-Boot] [PATCH v4 01/32] tpm: remove redundant blank line   Simon Glass
• [U-Boot] [PATCH v4 02/32] tpm: remove extra spaces between a function and its opening bracket   Simon Glass
• [U-Boot] [PATCH v4 04/32] tpm: align arguments with open parenthesis   Simon Glass
• [U-Boot] [PATCH v4 05/32] tpm: use the BIT() macro where applicable   Simon Glass
• [U-Boot] [PATCH v4 06/32] tpm: fix spelling   Simon Glass
• [U-Boot] [PATCH v4 07/32] tpm: add extra blank lines between declarations and code   Simon Glass
• [U-Boot] [PATCH v4 03/32] tpm: substitute deprecated uint<x>_t types with their u<x> equivalent   Simon Glass
• [U-Boot] [PATCH v4 11/32] tpm: add missing parameter in private data structure description   Simon Glass
• [U-Boot] [PATCH v4 25/32] tpm: add support for TPMv2.x SPI modules   Simon Glass
• [U-Boot] [PATCH v4 26/32] tpm: add the possibility to reset the chip with a gpio   Simon Glass
• [U-Boot] [PATCH v3 13/13] net: fastboot: Merge AOSP UDP fastboot   Simon Glass
• [U-Boot] [PATCH] image.h Allow booting Aarch64 from arm   Simon Glass
• [U-Boot] [PATCH v2 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Simon Glass
• [U-Boot] [PATCH v2 5/6] scripts/dtc: Re-sync with Linux 4.17-rc4   Simon Glass
• [U-Boot] [PATCH v4 10/14] fastboot: Extract common definitions from USB fastboot   Simon Glass
• [U-Boot] [PATCH v3 01/11] pmic: fsl: Provide some more definitions for MC34708 PMIC   Simon Glass
• [U-Boot] [PATCH v3 05/11] pmic: dm: Add support for MC34708 for PMIC DM   Simon Glass
• [U-Boot] [PATCH 5/7] mach-snapdragon: Introduce pinctrl driver   Simon Glass
• [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification   Simon Glass
• [U-Boot] [PATCH v4 25/32] tpm: add support for TPMv2.x SPI modules   Simon Glass
• [U-Boot] [RESEND][PATCH] cmd: nvedit: add whitelist option for env import   Simon Glass
• [U-Boot] [PATCH] PCI: Document pciauto_region_allocate()   Simon Glass
• [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification   Simon Glass
• [U-Boot] [RESEND][PATCH] cmd: nvedit: add whitelist option for env import   Simon Glass
• [U-Boot] [PATCH 00/12] binman: A few more features   Simon Glass
• [U-Boot] [PATCH 01/12] binman: Allow unit addresses for binaries   Simon Glass
• [U-Boot] [PATCH 02/12] binman: Refactor much of the image code into 'section'   Simon Glass
• [U-Boot] [PATCH 03/12] binman: Rename ELF parameters to 'section'   Simon Glass
• [U-Boot] [PATCH 04/12] binman: Rename Entry property to 'section'   Simon Glass
• [U-Boot] [PATCH 05/12] binman: Avoid setting sys.path globally   Simon Glass
• [U-Boot] [PATCH 06/12] binman: Add support for sections   Simon Glass
• [U-Boot] [PATCH 07/12] binman: Add documentation for pos-unset property   Simon Glass
• [U-Boot] [PATCH 08/12] binman: Allow a single test to be executed   Simon Glass
• [U-Boot] [PATCH 09/12] binman: Tidy up some docs and comments   Simon Glass
• [U-Boot] [PATCH 10/12] binman: Add support for outputing a map file   Simon Glass
• [U-Boot] [PATCH 11/12] binman: Add support for adding a name prefix to entries   Simon Glass
• [U-Boot] [PATCH 12/12] binman: Mark 'align-end' as implemented   Simon Glass
• [U-Boot] [PATCH] patman: Fix unit tests for SPDX   Simon Glass
• [U-Boot] [PATCH 1/2] test: Fix sandbox_spl test filter   Simon Glass
• [U-Boot] [PATCH 2/2] test: Fix test_vboot to call openssl without redirection   Simon Glass
• [U-Boot] [PATCH 2/2] sandbox: Rename 'num-gpios' property to avoid dtc warning   Simon Glass
• [U-Boot] [PATCH] common: image-fit: add FIT data-position & data-offset property support   Simon Glass
• [U-Boot] help on DM   Simon Glass
• [U-Boot] [PATCH v5] tpm2: tis_spi: add the possibility to reset the chip with a gpio   Simon Glass
• [U-Boot] [PATCH v3 07/21] efi: sandbox: Adjust memory usage for sandbox   Simon Glass
• [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification   Simon Glass
• [U-Boot] [PATCH] Remove CONFIG_MVGBE from config_whitelist.txt   Simon Glass
• [U-Boot] [PATCH v3 18/21] efi: sandbox: Add a simple 'bootefi test' command   Simon Glass
• [U-Boot] [PATCH v2 5/7] mach-snapdragon: Introduce pinctrl driver   Simon Glass
• [U-Boot] [PATCH v2 2/7] serial: serial_msm: fail probe if settings clocks fails   Simon Glass
• [U-Boot] [PATCH v4 00/16] efi: Enable basic sandbox support for EFI loader   Simon Glass
• [U-Boot] [PATCH v4 01/16] efi: Init the 'rows' and 'cols' variables   Simon Glass
• [U-Boot] [PATCH v4 02/16] efi: Update some comments related to smbios tables   Simon Glass
• [U-Boot] [PATCH v4 03/16] efi: sandbox: Adjust memory usage for sandbox   Simon Glass
• [U-Boot] [PATCH v4 04/16] sandbox: smbios: Update to support sandbox   Simon Glass
• [U-Boot] [PATCH v4 05/16] sandbox: Add a setjmp() implementation   Simon Glass
• [U-Boot] [PATCH v4 06/16] efi: sandbox: Add required linker sections   Simon Glass
• [U-Boot] [PATCH v4 07/16] efi: sandbox: Add distroboot support   Simon Glass
• [U-Boot] [PATCH v4 08/16] Define board_quiesce_devices() in a shared location   Simon Glass
• [U-Boot] [PATCH v4 09/16] Add a comment for board_quiesce_devices()   Simon Glass
• [U-Boot] [PATCH v4 10/16] efi: sandbox: Add relocation constants   Simon Glass
• [U-Boot] [PATCH v4 11/16] efi: Add a comment about duplicated ELF constants   Simon Glass
• [U-Boot] [PATCH v4 12/16] efi: sandbox: Enable EFI loader builder for sandbox   Simon Glass
• [U-Boot] [PATCH v4 13/16] efi: Split out test init/uninit into functions   Simon Glass
• [U-Boot] [PATCH v4 14/16] efi: sandbox: Add a simple 'bootefi test' command   Simon Glass
• [U-Boot] [PATCH v4 15/16] efi: Create a function to set up for running EFI code   Simon Glass
• [U-Boot] [PATCH v4 16/16] efi: Rename bootefi_test_finish() to bootefi_run_finish()   Simon Glass
• [U-Boot] [PATCH 2/6] usb: common: add support to get maximum speed from dt   Simon Glass
• [U-Boot] [PATCH 6/6] usb: xhci: zynqmp: Remove support for !DM_USB   Simon Glass
• [U-Boot] [PATCH v2 1/7] db820c: set clk node to be probed before relocation   Simon Glass
• [U-Boot] [PATCH v2 3/7] serial: serial_msm: initialize uart only before relocation   Simon Glass
• [U-Boot] [PATCH 2/2] test: Fix test_vboot to call openssl without redirection   Simon Glass
• [U-Boot] [PATCH 1/1] efi_loader: avoid using unitialized values as console size   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v1 1/5] serial: stm32: Add debug uart support   Simon Glass
• [U-Boot] [PATCH v1 2/5] serial: stm32: Fix bits defines name   Simon Glass
• [U-Boot] [PATCH v1 3/5] dm: serial: Add setparity   Simon Glass
• [U-Boot] [PATCH v5 10/16] fastboot: Rename public fb_ functions to fastboot_   Simon Glass
• [U-Boot] [PATCH v5 13/16] fastboot: Migrate FASTBOOT_FLASH_NAND_TRIMFFS to Kconfig   Simon Glass
• [U-Boot] [PATCH] pylibfdt: Add missing CC and LD to Makefile   Simon Glass
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Simon Glass
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Simon Glass
• [U-Boot] [PATCH v3] tools: buildman: Don't use the working dir as build dir   Simon Glass
• [U-Boot] [PATCH] pinctrl: do not set_state for device without valid ofnode   Simon Glass
• [U-Boot] Patman - How to send patched with errors   Simon Glass
• [U-Boot] [PATCH v6 16/18] fastboot: Add support for 'oem format' command   Simon Glass
• [U-Boot] iotrace examine buffer command   Simon Glass
• [U-Boot] [BUG] Cannot build qemu-x86_64_defconfig   Simon Glass
• [U-Boot] [PATCH 1/2] efi_selftest: allow building relocation code on x86_64   Simon Glass
• [U-Boot] [PATCH 2/2] efi_loader: build CRT0 and RELOC on x86_64   Simon Glass
• [U-Boot] [PATCH v2 2/2] test/py: add test for whitelist of variables while importing environment   Simon Glass
• [U-Boot] [PATCH 3/4] watchdog: cadence: Use live-tree functions   Simon Glass
• [U-Boot] [PATCH 1/4] serial: zynq: Use live-tree functions   Simon Glass
• [U-Boot] [PATCH 2/4] mmc: zynq: Use live-tree functions   Simon Glass
• [U-Boot] [PATCH 4/4] timer: cadence: Use live-tree functions   Simon Glass
• [U-Boot] [PATCH v2] add FIT data-position & data-offset property support   Simon Glass
• [U-Boot] [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   Simon Glass
• [U-Boot] [PATCH 2/4] ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds   Simon Glass
• [U-Boot] [PATCH 3/4] ata: ahci_mvebu: add scsi support   Simon Glass
• [U-Boot] [PATCH 4/4] arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU   Simon Glass
• [U-Boot] [PATCH] ehci: msm: Replace board_prepare_usb with board_usb_init   Simon Glass
• [U-Boot] [PATCH v3 6/6] test: dm: Fix wrong aliases property names   Simon Glass
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   Simon Glass
• [U-Boot] [PATCH 2/2] dm: pci: use a 1:1 mapping for bus <-> phy addresses   Simon Glass
• [U-Boot] [PATCH v2 3/5] video_osd: Add osd sandbox driver and tests   Simon Glass
• [U-Boot] [PATCH v2 1/5] drivers: Add OSD uclass   Simon Glass
• [U-Boot] [PATCH v2 2/5] video_osd: Add ihs_video_out driver   Simon Glass
• [U-Boot] [PATCH v2 5/5] cmd: Add osd commands   Simon Glass
• [U-Boot] [PATCH v2 4/5] lib: Import hexdump.c from Linux   Simon Glass
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Simon Glass
• [U-Boot] [PATCH v2] add FIT data-position & data-offset property support   Simon Glass
• [U-Boot] QUERY:U-boot DM:SERIAL:Multiple On-chip UART Controller Support   Simon Glass
• [U-Boot] QUERY:U-boot DM:SERIAL:Multiple On-chip UART Controller Support   Simon Glass
• [U-Boot] [PATCH] x86: baytrail: Correct the comment of IACORE_VIDS bit ranges   Simon Glass
• [U-Boot] [PATCH v2 1/7] drivers: Add AXI uclass   Simon Glass
• [U-Boot] [PATCH v2 2/7] axi: Add ihs_axi driver   Simon Glass
• [U-Boot] [PATCH v2 3/7] axi: Add AXI sandbox driver and simple emulator   Simon Glass
• [U-Boot] [PATCH v2 5/7] test: Add AXI test   Simon Glass
• [U-Boot] [PATCH v2 6/7] cmd: Add axi command   Simon Glass
• [U-Boot] [PATCH v3 1/3] misc: docs: Fix comments in misc.h   Simon Glass
• [U-Boot] [PATCH v3 2/3] misc: uclass: Add enable/disable function   Simon Glass
• [U-Boot] [PATCH v7 14/18] mmc: Separate "mmc swrite" from fastboot   Simon Glass
• [U-Boot] [PATCH v7 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Simon Glass
• [U-Boot] [PATCH v7 18/18] fastboot: Update fastboot documentation   Simon Glass
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   Simon Glass
• [U-Boot] [PATCH v3 03/11] test: Add tests for sysreset_get_status   Simon Glass
• [U-Boot] [PATCH v3 06/11] clk: Add MPC83xx clock driver   Simon Glass
• [U-Boot] [PATCH v3 07/11] timer: Add MPC83xx timer driver   Simon Glass
• [U-Boot] [PATCH v3 09/11] board_f: Use static print_cpuinfo if CONFIG_CPU is active   Simon Glass
• [U-Boot] [PATCH v3 10/11] cpu: Add MPC83xx CPU driver   Simon Glass
• [U-Boot] [PATCH v3 3/3] misc: Add gdsys_ioep driver   Simon Glass
• [U-Boot] [PATCH v3 11/11] misc: Add MPC83xx serdes driver   Simon Glass
• [U-Boot] [PATCH] regmap: Separate memory-based operations   Simon Glass
• [U-Boot] [PATCH 1/1] Makefile: clean should delete *.so   Simon Glass
• [U-Boot] [PATCH v4 03/16] efi: sandbox: Adjust memory usage for sandbox   Simon Glass
• [U-Boot] [PATCH v4 04/16] sandbox: smbios: Update to support sandbox   Simon Glass
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Simon Glass
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Simon Glass
• [U-Boot] [PATCH 1/6] cmd: iotrace: add set region command   Simon Glass
• [U-Boot] [PATCH 2/6] iotrace: add IO region limit   Simon Glass
• [U-Boot] [PATCH 3/6] common: iotrace: add timestamp to iotrace records   Simon Glass
• [U-Boot] [PATCH v2 5/6] cmd: iotrace: add dump trace command   Simon Glass
• [U-Boot] [PATCH 4/6] iotrace: move record definitons to header file   Simon Glass
• [U-Boot] [PATCH 6/6] common: iotrace: fix behaviour when buffer is full   Simon Glass
• [U-Boot] [PATCH v1 1/2] buildman: Extract environment as part of each build   Simon Glass
• [U-Boot] [PATCH 5/5] cmd: iotrace: add dump trace command   Simon Glass
• [U-Boot] [PATCH v3 6/6] test: dm: Fix wrong aliases property names   Simon Glass
• [U-Boot] [PATCH v1 2/2] buildman: Add support for environment delta in summary   Simon Glass
• [U-Boot] [PATCH v3 2/2] test/py: add test for whitelist of variables while importing environment   Simon Glass
• [U-Boot] [PATCH] regmap: Separate memory-based operations   Simon Glass
• [U-Boot] [PATCH 00/12] binman: A few more features   Simon Glass
• [U-Boot] [PATCH v2 3/6] common: iotrace: add timestamp to iotrace records   Simon Glass
• [U-Boot] [PATCH v1 1/2] buildman: Extract environment as part of each build   Simon Glass
• [U-Boot] [PATCH 6/6] common: iotrace: fix behaviour when buffer is full   Simon Glass
• [U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option   Simon Glass
• [U-Boot] [PATCH] patman: add option for limiting the Cc list   Simon Glass
• [U-Boot] [PATCH v2] Remove CONFIG_MVGBE from config_whitelist.txt   Simon Glass
• [U-Boot] [PATCH 2/2] configs: remove CONFIG_SYS_MVFS   Simon Glass
• [U-Boot] [PATCH v3 6/6] test: dm: Fix wrong aliases property names   Simon Glass
• [U-Boot] [PATCH v2] board_f: Only reserve memory for U-Boot if we're going to relocate   Simon Glass
• [U-Boot] [PATCH v6 01/11] syscon: dm: Add a new method to get a regmap from DTS   Simon Glass
• [U-Boot] [PATCH] x86: enable cpu-specific functions for x86_64 target   Simon Glass
• [U-Boot] [PATCH 6/6] common: iotrace: fix behaviour when buffer is full   Simon Glass
• [U-Boot] [PATCH v2] patman: add option for limiting the Cc list   Simon Glass
• [U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option   Simon Glass
• [U-Boot] [PATCH v3 1/3] misc: docs: Fix comments in misc.h   Simon Glass
• [U-Boot] [PATCH v3 0/6] Iotrace improvements   Simon Glass
• [U-Boot] [PATCH v2 1/2] buildman: Extract environment as part of each build   Simon Glass
• [U-Boot] [PATCH] regmap: Separate memory-based operations   Simon Glass
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Simon Glass
• [U-Boot] inappropriate PCI configuration on arm64 qemu?   Simon Glass
• [U-Boot] [PATCH 38/41] log: include command header file   Simon Glass
• [U-Boot] [PATCH 34/41] power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined   Simon Glass
• [U-Boot] [PATCH 33/41] power: Add PD device lookup interface to power domain uclass   Simon Glass
• [U-Boot] [PATCH 35/41] dm: core: device: enable power domain in probe   Simon Glass
• [U-Boot] [PATCH 36/41] drivers: regulator: fixed: add off-on-delay-us   Simon Glass
• [U-Boot] [PATCH v4 6/6] iotrace: fix behaviour when buffer is full   Simon Glass
• [U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option   Simon Glass
• [U-Boot] [PATCH] x86: tsc: add support for reading CPU freq from cpuid   Christian Gmeiner
• [U-Boot] [PATCH] x86: tsc: add support for reading CPU freq from cpuid   Christian Gmeiner
• [U-Boot] [PATCH 1/2] dm: pci: make ranges dt property optional   Christian Gmeiner
• [U-Boot] [PATCH 2/2] dm: pci: use a 1:1 mapping for bus <-> phy addresses   Christian Gmeiner
• [U-Boot] [PATCH] x86: tsc: add support for reading CPU freq from cpuid   Christian Gmeiner
• [U-Boot] [PATCH 1/2] dm: pci: make ranges dt property optional   Christian Gmeiner
• [U-Boot] [PATCH v1] rockchip: utilize CONFIG_DEFAULT_FDT_FILE   Klaus Goger
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: fix CONFIG_SPL_MAX_SIZE (less than SRAM)   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: fix CONFIG_SPL_MAX_SIZE (less than SRAM)   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: fix CONFIG_SPL_MAX_SIZE (less than SRAM)   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: fix CONFIG_SPL_MAX_SIZE (less than SRAM)   Simon Goldschmidt
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Simon Goldschmidt
• [U-Boot] [PATCH] efi_loader: correctly apply relocations from the .reloc section   Ivan Gorinov
• [U-Boot] [PATCH] efi_loader: fix off-by-one bug in efi_get_variable   Ivan Gorinov
• [U-Boot] [PATCH v2] efi_loader: fix off-by-one bug in efi_get_variable   Ivan Gorinov
• [U-Boot] [PATCH v3] efi_loader: fix off-by-one bug in efi_get_variable   Ivan Gorinov
• [U-Boot] [PATCH v3] efi_loader: fix off-by-one bug in efi_get_variable   Ivan Gorinov
• [U-Boot] [PATCH v4] efi_loader: fix off-by-one bug in efi_get_variable   Ivan Gorinov
• [U-Boot] [PATCH] efi_selftest: check for buffer overflow in efi_get_variable   Ivan Gorinov
• [U-Boot] [PATCH v2] efi_selftest: check for buffer overflow in efi_get_variable   Ivan Gorinov
• [U-Boot] [PATCH] x86: use EFI calling convention for efi_main on x86_64   Ivan Gorinov
• [U-Boot] [PATCH] x86: enable cpu-specific functions for x86_64 target   Ivan Gorinov
• [U-Boot] [PATCH] x86: enable cpu-specific functions for x86_64 target   Ivan Gorinov
• [U-Boot] [PATCH v2] x86: use EFI calling convention for efi_main on x86_64   Ivan Gorinov
• [U-Boot] [PATCH] x86: Add 64-bit setjmp/longjmp implementation   Ivan Gorinov
• [U-Boot] [PATCH v3] x86: use EFI calling convention for efi_main on x86_64   Ivan Gorinov
• [U-Boot] [PATCH v3] x86: use EFI calling convention for efi_main on x86_64   Ivan Gorinov
• [U-Boot] [PATCH v2] x86: use EFI calling convention for efi_main on x86_64   Ivan Gorinov
• [U-Boot] Logo for U-Boot   Alexander Graf
• [U-Boot] efi_loader: correctly apply relocations from the .reloc section   Alexander Graf
• [U-Boot] Logo for U-Boot   Alexander Graf
• [U-Boot] Logo for U-Boot   Alexander Graf
• [U-Boot] Logo for U-Boot   Alexander Graf
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   Alexander Graf
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   Alexander Graf
• [U-Boot] [PATCH] efi_loader: fix off-by-one bug in efi_get_variable   Alexander Graf
• [U-Boot] [PATCH 1/1] arm: print instructions pointed to by pc   Alexander Graf
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   Alexander Graf
• [U-Boot] [PATCH v1] arm64: zynqmp: Setup the first boot_target at run time   Alexander Graf
• [U-Boot] [PATCH] mmc: Unirqify bcm2835_sdhost and fix writes   Alexander Graf
• [U-Boot] [PATCH 1/2] rpi: Fix fdt_high & initrd_high for 64-bit builds   Alexander Graf
• [U-Boot] [PATCH] rpi: Adjust fdt_addr_r to a sane address   Alexander Graf
• [U-Boot] mmc: Unirqify bcm2835_sdhost and fix writes   Alexander Graf
• [U-Boot] [PULL] rpi patch queue 2018-05-24   Alexander Graf
• [U-Boot] [PATCH v3 1/2] arm: print instructions pointed to by pc   Alexander Graf
• [U-Boot] [PATCH v2 1/1] arm: print instructions pointed to by pc   Alexander Graf
• [U-Boot] [PATCH v4 04/16] sandbox: smbios: Update to support sandbox   Alexander Graf
• [U-Boot] [PATCH v4 07/16] efi: sandbox: Add distroboot support   Alexander Graf
• [U-Boot] [PATCH v4 10/16] efi: sandbox: Add relocation constants   Alexander Graf
• [U-Boot] [PATCH v4 00/16] efi: Enable basic sandbox support for EFI loader   Alexander Graf
• [U-Boot] [U-Boot, v4, 09/16] Add a comment for board_quiesce_devices()   Alexander Graf
• [U-Boot] [U-Boot, v4, 08/16] Define board_quiesce_devices() in a shared location   Alexander Graf
• [U-Boot] [U-Boot, v4, 06/16] efi: sandbox: Add required linker sections   Alexander Graf
• [U-Boot] [U-Boot, v4] efi_loader: fix off-by-one bug in efi_get_variable   Alexander Graf
• [U-Boot] [U-Boot, v4, 05/16] sandbox: Add a setjmp() implementation   Alexander Graf
• [U-Boot] [U-Boot, v4, 02/16] efi: Update some comments related to smbios tables   Alexander Graf
• [U-Boot] [PATCH 1/2] rpi: Fix fdt_high & initrd_high for 64-bit builds   Alexander Graf
• [U-Boot] [Xen-devel] [For knowledge-sake] Understanding of couple of things under the hood   Julien Grall
• [U-Boot] [U-Boot, v2, 1/2] rockchip: enable SYS_NS16550 for all SoCs by default   Jonathan Gray
• [U-Boot] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC   Jonathan Gray
• [U-Boot] [PATCH] rockchip: clk: rk3288: handle clk_enable requests for GMAC   Jonathan Gray
• [U-Boot] [U-Boot, v2, 1/2] rockchip: enable SYS_NS16550 for all SoCs by default   Jonathan Gray
• [U-Boot] [PATCH] rockchip: set SYS_NS16550_MEM32 for all SoCs   Jonathan Gray
• [U-Boot] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC   Jonathan Gray
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Simon Guinot
• [U-Boot] [PATCH 0/6] ARM: kirkwood: dts conversion round 2   Simon Guinot
• [U-Boot] [PATCH 0/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings   Anatolij Gustschin
• [U-Boot] [PATCH v3 1/2] pwm: sunxi: add support for PWM found on Allwinner A64   Anatolij Gustschin
• [U-Boot] [PATCH v2 0/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings   Anatolij Gustschin
• [U-Boot] [PATCH v4 0/2] sunxi: add PWM driver for A64   Anatolij Gustschin
• [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH v2 7/7] video_display: Add Xilinx LogiCore DP TX   Anatolij Gustschin
• [U-Boot] driver: net: fsl-mc: Initialization of MC memory   Ralf Göbel
• [U-Boot] driver: net: fsl-mc: Initialization of MC memory   Ralf Göbel
• [U-Boot] [PATCH] arm: sunxi: Add support for Pengpod 1000 tablet   Bob Ham
• [U-Boot] [PATCH] arm: sunxi: Add support for Pengpod 1000 tablet   Bob Ham
• [U-Boot] [PATCH] arm: sunxi: Add support for Pengpod 1000 tablet   Bob Ham
• [U-Boot] net: [PATCH v10 3/3] Adding wget   Duncan Hare
• [U-Boot] net: [PATCH v10 3/3] Adding wget   Duncan Hare
• [U-Boot] arm: Raspberry Pi Compile warnings   Duncan Hare
• [U-Boot] Patman - How to send patched with errors   Duncan Hare
• [U-Boot] SPDX header on .h files   Duncan Hare
• [U-Boot] Fw: Changing the App to fix a driver problem?   Duncan Hare
• [U-Boot] [PATCH 0/4] ARM: dts: uniphier: add additional required properties for ethernet nodes   Kunihiko Hayashi
• [U-Boot] [PATCH 1/4] ARM: dts: uniphier: add syscon-phy-mode property to each ethernet node   Kunihiko Hayashi
• [U-Boot] [PATCH 2/4] ARM: dts: uniphier: add required clocks and resets to Pro4 ethernet node   Kunihiko Hayashi
• [U-Boot] [PATCH 3/4] ARM: dts: uniphier: add clock-names and reset-names to ethernet node   Kunihiko Hayashi
• [U-Boot] [PATCH 4/4] ARM: dts: uniphier: change phy-mode to 'internal' for LD11   Kunihiko Hayashi
• [U-Boot] [PATCH] net: include/phy.h: add new mode for internal phy   Kunihiko Hayashi
• [U-Boot] [PATCH v2] net: include/phy.h: add new mode for internal phy   Kunihiko Hayashi
• [U-Boot] [PATCH] net: add Socionext AVE ethernet driver support   Kunihiko Hayashi
• [U-Boot] boot progress for invalid ramdisk   Marcel Hellwig
• [U-Boot] [PATCH] xilinx: zynq: Add support to secure images   Stefan Herbrechtsmeier
• [U-Boot] [PATCH] xilinx: zynq: Add support to secure images   Stefan Herbrechtsmeier
• [U-Boot] [PATCH v10 2/3] Adding TCP   Joe Hershberger
• [U-Boot] [PATCH v10 3/3] Adding wget   Joe Hershberger
• [U-Boot] [PATCH v10 3/3] Adding wget   Joe Hershberger
• [U-Boot] [PATCH v10 0/3] Why netboot:   Joe Hershberger
• [U-Boot] [PATCH v10 3/3] Adding wget   Joe Hershberger
• [U-Boot] [PATCH v10 0/3] Why netboot:   Joe Hershberger
• [U-Boot] [PATCH] net: sunxi: Correct MAC address register order   Joe Hershberger
• [U-Boot] [PATCH] [U-boot] net/phy/cortina: Add support for CS4223 PHY   Joe Hershberger
• [U-Boot] [v2] net/phy/cortina: Add support for CS4223 PHY   Joe Hershberger
• [U-Boot] [PATCH v3 1/5] sunxi: R40: add gigabit ethernet clocks   Joe Hershberger
• [U-Boot] [PATCH v3 2/5] net: sun8i-emac: support R40 GMAC   Joe Hershberger
• [U-Boot] [PATCH v3 4/5] sunxi: R40: add gigabit ethernet devicetree node   Joe Hershberger
• [U-Boot] [PATCH v3 5/5] configs: Bananapi_M2_Ultra: enable gigabit on the Bananapi   Joe Hershberger
• [U-Boot] [PATCH] Kconfig: Add dependency on HASH to verified boot   Joe Hershberger
• [U-Boot] [PATCH 1/2] [RFC]new command: wol - Wake on LAN   Joe Hershberger
• [U-Boot] [PATCH 2/2] [RFC]new command: wol - enable command   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: Add Kconfig option for BOOTP_NTPSERVER   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: bootp: Fix compile error processing ntpserver option   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: bootp: Fix compile error processing ntpserver option   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: mvgbe: remove CONFIG_DOVE   Joe Hershberger
• [U-Boot] [PATCH v2 1/2] net: Add Kconfig option for BOOTP_NTPSERVER   Joe Hershberger
• [U-Boot] [PATCH] treewide: Move CONFIG_PHY_MARVELL to Kconfig   Joe Hershberger
• [U-Boot] [PATCH] Fix Ymodem build when DEBUG and CONFIG_USE_TINY_PRINTF are selected   Joe Hershberger
• [U-Boot] [RFC PATCH v2 02/20] fastboot: Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT   Joe Hershberger
• [U-Boot] [RFC PATCH v2 03/20] fastboot: Refactor fastboot_okay/fail to take response   Joe Hershberger
• [U-Boot] [RFC PATCH v2 04/20] fastboot: Extract fastboot_okay/fail to fb_common.c   Joe Hershberger
• [U-Boot] [RFC PATCH v2 05/20] fastboot: Introduce fastboot_response and refactor fastboot_okay/fail   Joe Hershberger
• [U-Boot] [RFC PATCH v2 06/20] fastboot: Correct dependencies in FASTBOOT_FLASH   Joe Hershberger
• [U-Boot] [RFC PATCH v2 07/20] net: fastboot: Merge AOSP UDP fastboot   Joe Hershberger
• [U-Boot] [RFC PATCH v2 08/20] net: fastboot: Support building without MMC   Joe Hershberger
• [U-Boot] [RFC PATCH v2 09/20] fastboot: Refactor write_fb_response into fastboot_okay/fail/response   Joe Hershberger
• [U-Boot] [RFC PATCH v2 10/20] fastboot: Merge USB and UDP getvar implementation   Joe Hershberger
• [U-Boot] [RFC PATCH v2 11/20] fastboot: net: Change 'continue' so it matches USB fastboot   Joe Hershberger
• [U-Boot] [RFC PATCH v2 12/20] fastboot: net: Convert command lookup to a table   Joe Hershberger
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Joe Hershberger
• [U-Boot] [RFC PATCH v2 14/20] fastboot: Avoid re-parsing cmd_string for boot/reboot   Joe Hershberger
• [U-Boot] [RFC PATCH v2 15/20] fastboot: Merge boot common across USB and UDP   Joe Hershberger
• [U-Boot] [RFC PATCH v2 16/20] fastboot: net: Add NAND support   Joe Hershberger
• [U-Boot] [RFC PATCH v2 17/20] fastboot: Guard getvar:partition-type/size with MMC   Joe Hershberger
• [U-Boot] [RFC PATCH v2 18/20] fastboot: Check if part_name is NULL before using it   Joe Hershberger
• [U-Boot] [RFC PATCH v2 19/20] fastboot: Add missing newlines   Joe Hershberger
• [U-Boot] [RFC PATCH v2 20/20] fastboot: net: Split fastboot protocol out from net   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: add Kconfig for MVGBE   Joe Hershberger
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: add Kconfig for MVGBE   Joe Hershberger
• [U-Boot] [RFC PATCH v2 15/20] fastboot: Merge boot common across USB and UDP   Joe Hershberger
• [U-Boot] [RFC PATCH v2 16/20] fastboot: net: Add NAND support   Joe Hershberger
• [U-Boot] [RFC PATCH v2 07/20] net: fastboot: Merge AOSP UDP fastboot   Joe Hershberger
• [U-Boot] [RFC PATCH v2 11/20] fastboot: net: Change 'continue' so it matches USB fastboot   Joe Hershberger
• [U-Boot] [PATCH] net: Protect net_state from reentrant net_loop()   Joe Hershberger
• [U-Boot] [RESEND][PATCH] cmd: nvedit: add whitelist option for env import   Joe Hershberger
• [U-Boot] [PATCH v3 3/3] net: designware: Add reset ctrl to driver   Joe Hershberger
• [U-Boot] [PATCH] net: include/phy.h: add new mode for internal phy   Joe Hershberger
• [U-Boot] [PATCH v1 16/21] display5: net: Add function to read ethaddr from iMX6 fuses   Joe Hershberger
• [U-Boot] [PATCH v4 01/14] fastboot: Move fastboot to drivers/fastboot   Joe Hershberger
• [U-Boot] [PATCH v4 02/14] fastboot: Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT   Joe Hershberger
• [U-Boot] [PATCH v4 07/14] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME   Joe Hershberger
• [U-Boot] [PATCH v4 08/14] fastboot: Fix parameter types in _fb_nand_write   Joe Hershberger
• [U-Boot] [PATCH v4 09/14] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag   Joe Hershberger
• [U-Boot] [PATCH v4 10/14] fastboot: Extract common definitions from USB fastboot   Joe Hershberger
• [U-Boot] [PATCH v4 12/14] fs: Add fs_get_type_name to return current filesystem name   Joe Hershberger
• [U-Boot] [PATCH v4 13/14] mmc: Separate "mmc swrite" from fastboot   Joe Hershberger
• [U-Boot] [PATCH v1 16/21] display5: net: Add function to read ethaddr from iMX6 fuses   Joe Hershberger
• [U-Boot] [PATCH v4 13/14] mmc: Separate "mmc swrite" from fastboot   Joe Hershberger
• [U-Boot] [PATCH v4 13/14] mmc: Separate "mmc swrite" from fastboot   Joe Hershberger
• [U-Boot] [PATCH v4 14/14] net: fastboot: Merge AOSP UDP fastboot   Joe Hershberger
• [U-Boot] [PATCH] net: cpsw: ti: Reap completed packets before stopping interface   Joe Hershberger
• [U-Boot] [PATCH] net: nfs: don't fail when nfs_read_reply returns -NFS_RPC_DROP   Joe Hershberger
• [U-Boot] [PATCH] drivers/net/vsc9953: Initialize action RAM in VCAP complex   Joe Hershberger
• [U-Boot] [PATCH v2] net: MVGBE don't automatically select PHYLIB   Joe Hershberger
• [U-Boot] [PATCH] arm: mach-omap2: cache: Explicitly enable I cache   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 0/9] Add support for DM_USB for TI's DRA7 EVMs and AM57 EVMs platforms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 1/9] syscon: dm: Add a new method to get a regmap from DTS   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 2/9] phy: ti-pip3-phy: Add support for USB3 PHY   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 3/9] phy: Add a new driver for OMAP's USB2 PHYs   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 5/9] board; ti: am57xx: turn on USB clocks   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 6/9] dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 7/9] dts: dra7x: Disable USB1 on all evms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 8/9] configs: enable OMAP_USB2_PHY for all DRA7 platforms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 9/9] configs: am57xx_evm: Enable DM_USB and dependencies   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/6] usb: dwc3: Add dwc3_init/remove with DM_USB   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/6] usb: dwc3: Add generic DWC3 glue logic driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/6] usb: dwc3: Add generic DWC3 glue logic driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 0/7] Improvements for the dwc3_generic driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 1/7] usb: gadget: Do not call board_usb_xxx() directly in USB gadget drivers   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 2/7] usb: introduce a separate config option for DM USB device   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 3/7] usb: udc: implement DM versions of usb_gadget_initialize()/_release()/_handle_interrupt()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 4/7] dwc3_generic: do not probe the USB device driver when it's bound   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 5/7] dwc3: move phy operation to core.c   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 6/7] dwc3-generic: Handle the PHYs, the clocks and the reset lines   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 7/7] dwc3-generic: Add select_dr_mode operation   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 00/11] Add support for DM_USB and DM_USB_DEV for TI's DRA7 EVMs and AM57 EVMs platforms.   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 01/11] syscon: dm: Add a new method to get a regmap from DTS   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 02/11] phy: ti-pip3-phy: Add support for USB3 PHY   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 03/11] phy: Add a new driver for OMAP's USB2 PHYs   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 04/11] dwc3-generic: Add support for the TI DWC3 glue   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 05/11] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 06/11] board; ti: am57xx: turn on USB clocks   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 07/11] dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 08/11] configs: enable DM_USB and DM_USB_DEV for all DRA7 platforms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 09/11] configs: am57xx_evm: Enable DM_USB and DM_USB_DEV   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 10/11] board: ti: dra7-evm: remove USB platform code   Jean-Jacques Hiblot
• [U-Boot] [PATCH v6 11/11] board: ti: am57xx: remove USB platform code   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 0/7] Improvements for the dwc3_generic driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 2/7] usb: introduce a separate config option for DM USB device   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 1/7] usb: gadget: Do not call board_usb_xxx() directly in USB gadget drivers   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 0/7] Improvements for the dwc3_generic driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 0/7] Improvements for the dwc3_generic driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/7] usb: gadget: Do not call board_usb_xxx() directly in USB gadget drivers   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/7] usb: introduce a separate config option for DM USB device   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/7] usb: udc: implement DM versions of usb_gadget_initialize()/_release()/_handle_interrupt()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 4/7] dwc3_generic: do not probe the USB device driver when it's bound   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 5/7] dwc3: move phy operation to core.c   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 6/7] dwc3-generic: Handle the PHYs, the clocks and the reset lines   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 7/7] dwc3-generic: Add select_dr_mode operation   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 00/11] Add support for DM_USB and DM_USB_DEV for TI's DRA7 EVMs and AM57 EVMs platforms.   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 01/11] syscon: dm: Add a new method to get a regmap from DTS   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 02/11] phy: ti-pip3-phy: Add support for USB3 PHY   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 03/11] phy: Add a new driver for OMAP's USB2 PHYs   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 04/11] dwc3-generic: Add support for the TI DWC3 glue   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 05/11] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 06/11] board; ti: am57xx: turn on USB clocks   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 07/11] dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 08/11] configs: enable DM_USB and DM_USB_DEV for all DRA7 platforms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 09/11] configs: am57xx_evm: Enable DM_USB and DM_USB_DEV   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 10/11] board: ti: dra7-evm: remove USB platform code   Jean-Jacques Hiblot
• [U-Boot] [PATCH v7 11/11] board: ti: am57xx: remove USB platform code   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/3] Adjust at91 boards config offset for all boards   Eugen Hristev
• [U-Boot] [PATCH 1/3] configs: at91: sama5_common: Adjust CONFIG_ENV_OFFSET to match block alignment   Eugen Hristev
• [U-Boot] [PATCH 2/3] configs: at91: Adjust CONFIG_ENV_OFFSET to match sama5 address   Eugen Hristev
• [U-Boot] [PATCH 3/3] configs: at91sam9x5ek: updated mtdparts variable in bootargs   Eugen Hristev
• [U-Boot] [PATCH] clk: at91: clk-h32mx: replace dm_warn with dev_dbg   Eugen Hristev
• [U-Boot] [PATCH] fs: ext4: fix crash on ext4ls   Eugen Hristev
• [U-Boot] [PATCH] configs: sama5d2_xplained: enable ext4 command support   Eugen Hristev
• [U-Boot] [PATCH v2 1/2] fs: ext4: fix crash on ext4ls   Eugen Hristev
• [U-Boot] [PATCH v2 2/2] test: fs: fs-test: Modified test 1 to do a ls to a nonexistent dir   Eugen Hristev
• [U-Boot] [PATCH 1/2] configs: sama5d2_xplained: set default FAT env location to SD-Card   Eugen Hristev
• [U-Boot] [PATCH 2/2] configs: sama5d2_xplained: fix bootcmd/args for spi+emmc demo   Eugen Hristev
• [U-Boot] [PATCH] mx7: psci: add cpu hotplug support   Anson Huang
• [U-Boot] [PATCH 1/4] mx7: psci: add cpu hotplug support   Anson Huang
• [U-Boot] [PATCH 2/4] imx: mx7: add gpc initialization for low power mode   Anson Huang
• [U-Boot] [PATCH 3/4] imx: mx7: add system suspend/resume support   Anson Huang
• [U-Boot] [PATCH 4/4] imx: mx7: add psci_features support   Anson Huang
• [U-Boot] [PATCH] mx7: psci: add cpu hotplug support   Anson Huang
• [U-Boot] [PATCH 1/4] mx7: psci: add cpu hotplug support   Anson Huang
• [U-Boot] [PATCH] net: Protect net_state from reentrant net_loop()   Leonid Iziumtsev
• [U-Boot] u-boot Marvell ethernet switch development   Dennis Jacobs
• [U-Boot] u-boot problem - Unknown commands   Dennis Jacobs
• [U-Boot] u-boot linker problem   Dennis Jacobs
• [U-Boot] [PATCH] board/freescale,lsch3: Add entry for 0.9v   Priyanka Jain
• [U-Boot] GPL clarification needed   Burt Janz
• [U-Boot] Which carrier card is targeted by the zynq picozed implementation?   Ed Jubenville
• [U-Boot] [cosmetic PATCH v1] ARM: socfpga: Fix Documentation errors in scu_registers   Ben Kalo
• [U-Boot] [PATCH 1/2] ARM: dts: exynos5: remove the duplicated nodes   Minkyu Kang
• [U-Boot] [PATCH 2/2] ARM: dts: exynos5: add the interrupt-parent property   Minkyu Kang
• [U-Boot] [PATCH 1/2] ARM: dts: exynos5: remove the duplicated nodes   Minkyu Kang
• [U-Boot] [PATCH 1/2] ARM: dts: exynos5: remove the duplicated nodes   Minkyu Kang
• [U-Boot] [PATCH] rockchip: make_fit_atf: use elf entry point   Mian Yousaf Kaukab
• [U-Boot] [PATCH] rockchip: make_fit_atf: make python3 compatible   Mian Yousaf Kaukab
• [U-Boot] [PATCH] Makefile: build u-boot before running its generator   Mian Yousaf Kaukab
• [U-Boot] [PATCH] Makefile: build u-boot before running its generator   Mian Yousaf Kaukab
• [U-Boot] [PATCH] board: ti: am43: Fix DCDC3 voltage for epos-evm   Keerthy
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   Martin Kelly
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   Martin Kelly
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   Martin Kelly
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   Martin Kelly
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   Martin Kelly
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   Martin Kelly
• [U-Boot] [PATCH v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Mark Kettenis
• [U-Boot] [PATCH v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Mark Kettenis
• [U-Boot] [PATCH v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Mark Kettenis
• [U-Boot] [PATCH 0/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings   Vasily Khoruzhick
• [U-Boot] [PATCH v4 0/2] sunxi: add PWM driver for A64   Vasily Khoruzhick
• [U-Boot] [PATCH v4 1/2] pwm: sunxi: add support for PWM found on Allwinner A64   Vasily Khoruzhick
• [U-Boot] [PATCH v4 2/2] dts: sunxi: add PWM node for sun50i   Vasily Khoruzhick
• [U-Boot] [PATCH v2 0/2] sunxi: fix eMMC stability issues on A64   Vasily Khoruzhick
• [U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode on A64   Vasily Khoruzhick
• [U-Boot] [PATCH v2 2/2] mmc: sunxi: run calibration on A64   Vasily Khoruzhick
• [U-Boot] [PATCH] net: nfs: don't fail when nfs_read_reply returns -NFS_RPC_DROP   Vasily Khoruzhick
• [U-Boot] [PATCH v2 0/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings   Vasily Khoruzhick
• [U-Boot] [PATCH v2 1/2] sunxi: video: HDMI: use correct bits for HSYNC and VSYNC polarity.   Vasily Khoruzhick
• [U-Boot] [PATCH v2 2/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings   Vasily Khoruzhick
• [U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode on A64   Vasily Khoruzhick
• [U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode on A64   Vasily Khoruzhick
• [U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode on A64   Vasily Khoruzhick
• [U-Boot] [PATCH v3 0/2] sunxi: fix eMMC stability issues on A64   Vasily Khoruzhick
• [U-Boot] [PATCH v3 1/2] sunxi-mmc: use new mode on A64   Vasily Khoruzhick
• [U-Boot] [PATCH v3 2/2] mmc: sunxi: run calibration on A64   Vasily Khoruzhick
• [U-Boot] [PATCH v3 1/2] sunxi-mmc: use new mode on A64   Vasily Khoruzhick
• [U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes   Rabeeh Khoury
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Alex Kiernan
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Alex Kiernan
• [U-Boot] [RFC PATCH v2 00/20] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Alex Kiernan
• [U-Boot] [PATCH] Fix Ymodem build when DEBUG and CONFIG_USE_TINY_PRINTF are selected   Alex Kiernan
• [U-Boot] [RFC PATCH v2 20/20] fastboot: net: Split fastboot protocol out from net   Alex Kiernan
• [U-Boot] [RFC PATCH v2 13/20] fastboot: Merge reboot-bootloader handling   Alex Kiernan
• [U-Boot] [RFC PATCH v2 12/20] fastboot: net: Convert command lookup to a table   Alex Kiernan
• [U-Boot] [PATCH] Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v5 1/7] bootcount: spl: Enable bootcount support in SPL   Alex Kiernan
• [U-Boot] [PATCH v5 2/7] bootcount: Add include guards into bootcount.h file   Alex Kiernan
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Alex Kiernan
• [U-Boot] [PATCH v5 4/7] bootcount: Rewrite autoboot to use wrapper functions from bootcount.h   Alex Kiernan
• [U-Boot] [RFC PATCH v2 15/20] fastboot: Merge boot common across USB and UDP   Alex Kiernan
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Alex Kiernan
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Alex Kiernan
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Alex Kiernan
• [U-Boot] [RFC PATCH v2 16/20] fastboot: net: Add NAND support   Alex Kiernan
• [U-Boot] [RFC PATCH v2 07/20] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [RFC PATCH v2 11/20] fastboot: net: Change 'continue' so it matches USB fastboot   Alex Kiernan
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Alex Kiernan
• [U-Boot] [RFC PATCH v2 07/20] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [PATCH] bootcount: Add bootcount command   Alex Kiernan
• [U-Boot] [PATCH] net: cpsw: ti: Reap completed packets before stopping interface   Alex Kiernan
• [U-Boot] [PATCH v3 00/13] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [PATCH v3 01/13] fastboot: Move fastboot to drivers/fastboot   Alex Kiernan
• [U-Boot] [PATCH v3 02/13] fastboot: Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT   Alex Kiernan
• [U-Boot] [PATCH v3 03/13] fastboot: Refactor fastboot_okay/fail to take response   Alex Kiernan
• [U-Boot] [PATCH v3 04/13] fastboot: Extract fastboot_okay/fail to fb_common.c   Alex Kiernan
• [U-Boot] [PATCH v3 05/13] fastboot: Correct dependencies in FASTBOOT_FLASH   Alex Kiernan
• [U-Boot] [PATCH v3 06/13] fastboot: Add missing newlines   Alex Kiernan
• [U-Boot] [PATCH v3 07/13] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME   Alex Kiernan
• [U-Boot] [PATCH v3 08/13] fastboot: Fix parameter types in _fb_nand_write   Alex Kiernan
• [U-Boot] [PATCH v3 09/13] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag   Alex Kiernan
• [U-Boot] [PATCH v3 10/13] fastboot: Extract common definitions from USB fastboot   Alex Kiernan
• [U-Boot] [PATCH v3 11/13] ti: fastboot: Move weak overrides to board files   Alex Kiernan
• [U-Boot] [PATCH v3 12/13] fs: Add fs_get_type_name to return current filesystem name   Alex Kiernan
• [U-Boot] [PATCH v3 13/13] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [RFC PATCH 0/1] Convert USB fastboot code to use shared protocol   Alex Kiernan
• [U-Boot] [RFC PATCH] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [U-Boot,3/3] mmc: support writing sparse images   Alex Kiernan
• [U-Boot] [PATCH v3 10/13] fastboot: Extract common definitions from USB fastboot   Alex Kiernan
• [U-Boot] [U-Boot,3/3] mmc: support writing sparse images   Alex Kiernan
• [U-Boot] [PATCH v3 13/13] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [PATCH v4 00/14] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [PATCH v4 01/14] fastboot: Move fastboot to drivers/fastboot   Alex Kiernan
• [U-Boot] [PATCH v4 02/14] fastboot: Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT   Alex Kiernan
• [U-Boot] [PATCH v4 03/14] fastboot: Refactor fastboot_okay/fail to take response   Alex Kiernan
• [U-Boot] [PATCH v4 04/14] fastboot: Extract fastboot_okay/fail to fb_common.c   Alex Kiernan
• [U-Boot] [PATCH v4 05/14] fastboot: Correct dependencies in FASTBOOT_FLASH   Alex Kiernan
• [U-Boot] [PATCH v4 06/14] fastboot: Add missing newlines   Alex Kiernan
• [U-Boot] [PATCH v4 07/14] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME   Alex Kiernan
• [U-Boot] [PATCH v4 08/14] fastboot: Fix parameter types in _fb_nand_write   Alex Kiernan
• [U-Boot] [PATCH v4 09/14] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag   Alex Kiernan
• [U-Boot] [PATCH v4 10/14] fastboot: Extract common definitions from USB fastboot   Alex Kiernan
• [U-Boot] [PATCH v4 11/14] ti: fastboot: Move weak overrides to board files   Alex Kiernan
• [U-Boot] [PATCH v4 12/14] fs: Add fs_get_type_name to return current filesystem name   Alex Kiernan
• [U-Boot] [PATCH v4 13/14] mmc: Separate "mmc swrite" from fastboot   Alex Kiernan
• [U-Boot] [PATCH v4 14/14] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [PATCH v4 00/14] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [RESEND][PATCH] cmd: nvedit: add whitelist option for env import   Alex Kiernan
• [U-Boot] [PATCH v4 13/14] mmc: Separate "mmc swrite" from fastboot   Alex Kiernan
• [U-Boot] [PATCH v3 13/13] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [PATCH v4 13/14] mmc: Separate "mmc swrite" from fastboot   Alex Kiernan
• [U-Boot] [PATCH v4 14/14] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [UBOOT PATCH] env: mmc: Fix misaligned buffer address when saving envvars to FAT   Alex Kiernan
• [U-Boot] [PATCH v5 00/16] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [PATCH v5 01/16] fastboot: Move fastboot to drivers/fastboot   Alex Kiernan
• [U-Boot] [PATCH v5 02/16] fastboot: Refactor fastboot_okay/fail to take response   Alex Kiernan
• [U-Boot] [PATCH v5 03/16] fastboot: Extract fastboot_okay/fail to fb_common.c   Alex Kiernan
• [U-Boot] [PATCH v5 04/16] fastboot: Correct dependencies in FASTBOOT_FLASH   Alex Kiernan
• [U-Boot] [PATCH v5 05/16] fastboot: Add missing newlines   Alex Kiernan
• [U-Boot] [PATCH v5 06/16] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME   Alex Kiernan
• [U-Boot] [PATCH v5 07/16] fastboot: Fix parameter types in _fb_nand_write   Alex Kiernan
• [U-Boot] [PATCH v5 08/16] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag   Alex Kiernan
• [U-Boot] [PATCH v5 09/16] fastboot: Extract common definitions from USB fastboot   Alex Kiernan
• [U-Boot] [PATCH v5 10/16] fastboot: Rename public fb_ functions to fastboot_   Alex Kiernan
• [U-Boot] [PATCH v5 11/16] ti: fastboot: Move weak overrides to board files   Alex Kiernan
• [U-Boot] [PATCH v5 12/16] fs: Add fs_get_type_name to return current filesystem name   Alex Kiernan
• [U-Boot] [PATCH v5 13/16] fastboot: Migrate FASTBOOT_FLASH_NAND_TRIMFFS to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v5 14/16] mmc: Separate "mmc swrite" from fastboot   Alex Kiernan
• [U-Boot] [PATCH v5 15/16] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [PATCH v5 16/16] fastboot: Add support for 'oem format' command   Alex Kiernan
• [U-Boot] [RFC PATCH v2 0/2] Convert USB fastboot code to use shared protocol   Alex Kiernan
• [U-Boot] [RFC PATCH v2 1/2] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [RFC PATCH v2 2/2] fastboot: Update fastboot documentation   Alex Kiernan
• [U-Boot] [RFC PATCH v2 1/2] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [RFC PATCH v2 1/2] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Alex Kiernan
• [U-Boot] [PATCH v6 00/18] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [PATCH v6 01/18] fastboot: Move fastboot to drivers/fastboot   Alex Kiernan
• [U-Boot] [PATCH v6 02/18] fastboot: Refactor fastboot_okay/fail to take response   Alex Kiernan
• [U-Boot] [PATCH v6 03/18] fastboot: Extract fastboot_okay/fail to fb_common.c   Alex Kiernan
• [U-Boot] [PATCH v6 04/18] fastboot: Correct dependencies in FASTBOOT_FLASH   Alex Kiernan
• [U-Boot] [PATCH v6 05/18] fastboot: Add missing newlines   Alex Kiernan
• [U-Boot] [PATCH v6 06/18] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME   Alex Kiernan
• [U-Boot] [PATCH v6 07/18] fastboot: Fix parameter types in _fb_nand_write   Alex Kiernan
• [U-Boot] [PATCH v6 08/18] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag   Alex Kiernan
• [U-Boot] [PATCH v6 09/18] fastboot: Extract common definitions from USB fastboot   Alex Kiernan
• [U-Boot] [PATCH v6 10/18] fastboot: Rename public fb_ functions to fastboot_   Alex Kiernan
• [U-Boot] [PATCH v6 11/18] ti: fastboot: Move weak overrides to board files   Alex Kiernan
• [U-Boot] [PATCH v6 12/18] fs: Add fs_get_type_name to return current filesystem name   Alex Kiernan
• [U-Boot] [PATCH v6 13/18] fastboot: Migrate FASTBOOT_FLASH_NAND_TRIMFFS to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v6 14/18] mmc: Separate "mmc swrite" from fastboot   Alex Kiernan
• [U-Boot] [PATCH v6 15/18] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [PATCH v6 16/18] fastboot: Add support for 'oem format' command   Alex Kiernan
• [U-Boot] [PATCH v6 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [PATCH v6 18/18] fastboot: Update fastboot documentation   Alex Kiernan
• [U-Boot] [PATCH v6 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [PATCH v6 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [PATCH v7 00/18] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [PATCH v7 01/18] fastboot: Move fastboot to drivers/fastboot   Alex Kiernan
• [U-Boot] [PATCH v7 02/18] fastboot: Refactor fastboot_okay/fail to take response   Alex Kiernan
• [U-Boot] [PATCH v7 03/18] fastboot: Extract fastboot_okay/fail to fb_common.c   Alex Kiernan
• [U-Boot] [PATCH v7 04/18] fastboot: Correct dependencies in FASTBOOT_FLASH   Alex Kiernan
• [U-Boot] [PATCH v7 05/18] fastboot: Add missing newlines   Alex Kiernan
• [U-Boot] [PATCH v7 06/18] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME   Alex Kiernan
• [U-Boot] [PATCH v7 07/18] fastboot: Fix parameter types in _fb_nand_write   Alex Kiernan
• [U-Boot] [PATCH v7 08/18] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag   Alex Kiernan
• [U-Boot] [PATCH v7 09/18] fastboot: Extract common definitions from USB fastboot   Alex Kiernan
• [U-Boot] [PATCH v7 10/18] fastboot: Rename public fb_ functions to fastboot_   Alex Kiernan
• [U-Boot] [PATCH v7 11/18] ti: fastboot: Move weak overrides to board files   Alex Kiernan
• [U-Boot] [PATCH v7 12/18] fs: Add fs_get_type_name to return current filesystem name   Alex Kiernan
• [U-Boot] [PATCH v7 13/18] fastboot: Migrate FASTBOOT_FLASH_NAND_TRIMFFS to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v7 14/18] mmc: Separate "mmc swrite" from fastboot   Alex Kiernan
• [U-Boot] [PATCH v7 15/18] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [PATCH v7 16/18] fastboot: Add support for 'oem format' command   Alex Kiernan
• [U-Boot] [PATCH v7 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [PATCH v7 18/18] fastboot: Update fastboot documentation   Alex Kiernan
• [U-Boot] [PATCH v6 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [PATCH v1 0/2] Add bootlimit to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v1 1/2] Add BOOTCOUNT_BOOTLIMIT to set reboot limit   Alex Kiernan
• [U-Boot] [PATCH v1 2/2] Migrate bootlimit to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v1 2/2] Migrate bootlimit to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v1 1/2] buildman: Extract environment as part of each build   Alex Kiernan
• [U-Boot] [PATCH v1 2/2] buildman: Add support for environment delta in summary   Alex Kiernan
• [U-Boot] [PATCH v1 1/2] buildman: Extract environment as part of each build   Alex Kiernan
• [U-Boot] [PATCH v7 14/18] mmc: Separate "mmc swrite" from fastboot   Alex Kiernan
• [U-Boot] [PATCH v1 1/2] buildman: Extract environment as part of each build   Alex Kiernan
• [U-Boot] [PATCH v3 1/2] cmd: nvedit: env import can now import only variables passed as parameters   Alex Kiernan
• [U-Boot] [PATCH v3 1/2] cmd: nvedit: env import can now import only variables passed as parameters   Alex Kiernan
• [U-Boot] [PATCH v1 1/2] buildman: Extract environment as part of each build   Alex Kiernan
• [U-Boot] [PATCH v7 00/18] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [PATCH v8 00/18] Add fastboot UDP support   Alex Kiernan
• [U-Boot] [PATCH v8 01/18] fastboot: Move fastboot to drivers/fastboot   Alex Kiernan
• [U-Boot] [PATCH v8 02/18] fastboot: Refactor fastboot_okay/fail to take response   Alex Kiernan
• [U-Boot] [PATCH v8 03/18] fastboot: Extract fastboot_okay/fail to fb_common.c   Alex Kiernan
• [U-Boot] [PATCH v8 04/18] fastboot: Correct dependencies in FASTBOOT_FLASH   Alex Kiernan
• [U-Boot] [PATCH v8 05/18] fastboot: Add missing newlines   Alex Kiernan
• [U-Boot] [PATCH v8 06/18] fastboot: Remove FIXME for CONFIG_FASTBOOT_...NAME   Alex Kiernan
• [U-Boot] [PATCH v8 07/18] fastboot: Fix parameter types in _fb_nand_write   Alex Kiernan
• [U-Boot] [PATCH v8 08/18] fastboot: Rename fb_set_reboot_flag to fastboot_set_reboot_flag   Alex Kiernan
• [U-Boot] [PATCH v8 09/18] fastboot: Extract common definitions from USB fastboot   Alex Kiernan
• [U-Boot] [PATCH v8 10/18] fastboot: Rename public fb_ functions to fastboot_   Alex Kiernan
• [U-Boot] [PATCH v8 11/18] ti: fastboot: Move weak overrides to board files   Alex Kiernan
• [U-Boot] [PATCH v8 12/18] fs: Add fs_get_type_name to return current filesystem name   Alex Kiernan
• [U-Boot] [PATCH v8 13/18] fastboot: Migrate FASTBOOT_FLASH_NAND_TRIMFFS to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v8 14/18] mmc: Separate "mmc swrite" from fastboot   Alex Kiernan
• [U-Boot] [PATCH v8 15/18] net: fastboot: Merge AOSP UDP fastboot   Alex Kiernan
• [U-Boot] [PATCH v8 16/18] fastboot: Add support for 'oem format' command   Alex Kiernan
• [U-Boot] [PATCH v8 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Alex Kiernan
• [U-Boot] [PATCH v8 18/18] fastboot: Update fastboot documentation   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] buildman: Extract environment as part of each build   Alex Kiernan
• [U-Boot] [PATCH v2 2/2] buildman: Add support for environment delta in summary   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] buildman: Extract environment as part of each build   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] buildman: Extract environment as part of each build   Alex Kiernan
• [U-Boot] [PATCH v3 1/2] buildman: Extract environment as part of each build   Alex Kiernan
• [U-Boot] [PATCH v3 2/2] buildman: Add support for environment delta in summary   Alex Kiernan
• [U-Boot] [PATCH v2 0/2] Add bootlimit to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v2 1/2] Add BOOTCOUNT_BOOTLIMIT to set reboot limit   Alex Kiernan
• [U-Boot] [PATCH v2 2/2] Migrate bootlimit to Kconfig   Alex Kiernan
• [U-Boot] [PATCH 1/2] gadget: f_thor: fix filename overflow   Seung-Woo Kim
• [U-Boot] [PATCH 2/2] gadget: f_thor: update to support more than 4GB file as thor 5.0   Seung-Woo Kim
• [U-Boot] [PATCH 2/2] gadget: f_thor: update to support more than 4GB file as thor 5.0   Seung-Woo Kim
• [U-Boot] [PATCH] gadget: f_thor: Fix memory leaks of usb request and its buffer   Seung-Woo Kim
• [U-Boot] [PATCH v2] gadget: f_thor: Fix memory leaks of usb request and its buffer   Seung-Woo Kim
• [U-Boot] [PATCH v2] gadget: f_thor: Fix memory leaks of usb request and its buffer   Seung-Woo Kim
• [U-Boot] [PATCH v3] gadget: f_thor: Fix memory leaks of usb request and its buffer   Seung-Woo Kim
• [U-Boot] [PATCH V6 0/2] Update sabrelite and nitrogen6x boards to use distro boot support   Troy Kisky
• [U-Boot] [PATCH] sunxi: reduce Orange Pi Zero DRAM clock speed   Jan Kiszka
• [U-Boot] [PATCH] sunxi: reduce Orange Pi Zero DRAM clock speed   Jan Kiszka
• [U-Boot] [PATCH] arm: dts: sunxi: enable Ethernet on NanoPi Neo Plus2   Jonathan A. Kollasch
• [U-Boot] [PATCH] arm64: dts: allwinner: h5: NanoPi NEO Plus2 : add EMAC support   Jonathan A. Kollasch
• [U-Boot] [PATCH] arm: dts: sunxi: enable Ethernet on NanoPi Neo Plus2   Jonathan A. Kollasch
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   Markus Krebs
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   Markus Krebs
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   Markus Krebs
• [U-Boot] [PATCH] driver/mtd/spi: Default page size Spansion flash "S25FS512S" is 256b   Ashish Kumar
• [U-Boot] [PATCH] driver/mtd/spi: Default page size Spansion flash "S25FS512S" is 256b   Ashish Kumar
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Ashish Kumar
• [U-Boot] Getting issue while building u-boot with the revision v2018.01 for armv8.   Ashwin Kumar
• [U-Boot] [UBOOT PATCH] env: mmc: Fix misaligned buffer address when saving envvars to FAT   Vipul Kumar
• [U-Boot] [UBOOT PATCH] env: mmc: Fix misaligned buffer address when saving envvars to FAT   Vipul Kumar
• [U-Boot] [UBOOT PATCH] spi: xilinx_spi: Modify xilinx spi driver   Vipul Kumar
• [U-Boot] [PATCH 1/2] board: move ppa firmware address in board specific kconfig   Prabhakar Kushwaha
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Prabhakar Kushwaha
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Prabhakar Kushwaha
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Prabhakar Kushwaha
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Prabhakar Kushwaha
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Prabhakar Kushwaha
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Prabhakar Kushwaha
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Prabhakar Kushwaha
• [U-Boot] [PATCH RFCv2 0/6] Beginning of migration of MPC8xx to DM model   Christophe LEROY
• [U-Boot] [PATCH RFCv2 0/6] Beginning of migration of MPC8xx to DM model   Christophe LEROY
• [U-Boot] [PATCH] zynq: Add Zynq MiniZed board support   Clement Laigle
• [U-Boot] [PATCH 0/5] ARM: legoev3: updates   David Lechner
• [U-Boot] [PATCH 1/5] ARM: legoev3: increase flash image sizes   David Lechner
• [U-Boot] [PATCH 2/5] ARM: legoev3: Move UART enable to early init   David Lechner
• [U-Boot] [PATCH 3/5] ARM: legoev3: disable networking   David Lechner
• [U-Boot] [PATCH 4/5] ARM: legoev3: remove unused configuration options   David Lechner
• [U-Boot] [PATCH 5/5] ARM: legoev3: update boot script to load uEnv.txt and .dtb   David Lechner
• [U-Boot] u-boot on raspberry pi cm3   Jan Leonhardt
• [U-Boot] Request for known good GCC toolchain for U-boot/ARM11   Magnus Lilja
• [U-Boot] [PATCH 0/2] i.MX31PDK: Move CONFIG_MX31* to Kconfig   Magnus Lilja
• [U-Boot] [PATCH 1/2] mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.   Magnus Lilja
• [U-Boot] [PATCH 2/2] mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.   Magnus Lilja
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   Ken Ma
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   Ken Ma
• [U-Boot] [PATCH v2 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   Ken Ma
• [U-Boot] [BUG] efi_loader: LUV test and SCT test fail on minnowboard   Macheeri Ramaswamy, ShubhashreeX
• [U-Boot] [PATCH v3 0/7] Provide SPL support for bootcount (in the case of using falcon boot mode)   Lukasz Majewski
• [U-Boot] [PATCH v3 1/7] bootcount: spl: Enable bootcount support in SPL   Lukasz Majewski
• [U-Boot] [PATCH v3 2/7] bootcount: Add include guards into bootcount.h file   Lukasz Majewski
• [U-Boot] [PATCH v3 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH v3 4/7] bootcount: Rewrite autoboot to use wrapper functions from bootcount.h   Lukasz Majewski
• [U-Boot] [PATCH v3 5/7] bootcount: spl: Extend SPL to support bootcount incrementation   Lukasz Majewski
• [U-Boot] [PATCH v3 6/7] bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking   Lukasz Majewski
• [U-Boot] [PATCH v3 7/7] bootcount: display5: config: Enable boot count feature in the display5 board   Lukasz Majewski
• [U-Boot] [PATCH v5 0/7] Provide SPL support for bootcount (in the case of using falcon boot mode)   Lukasz Majewski
• [U-Boot] [PATCH v5 1/7] bootcount: spl: Enable bootcount support in SPL   Lukasz Majewski
• [U-Boot] [PATCH v5 2/7] bootcount: Add include guards into bootcount.h file   Lukasz Majewski
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH v5 4/7] bootcount: Rewrite autoboot to use wrapper functions from bootcount.h   Lukasz Majewski
• [U-Boot] [PATCH v5 5/7] bootcount: spl: Extend SPL to support bootcount incrementation   Lukasz Majewski
• [U-Boot] [PATCH v5 6/7] bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking   Lukasz Majewski
• [U-Boot] [PATCH v5 7/7] bootcount: display5: config: Enable boot count feature in the display5 board   Lukasz Majewski
• [U-Boot] [PATCH v3 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH v2 00/11] pmic: sandbox: Add support for MC34709 PMIC   Lukasz Majewski
• [U-Boot] [PATCH v2 01/11] pmic: fsl: Provide some more definitions for MC34708 PMIC   Lukasz Majewski
• [U-Boot] [PATCH v2 02/11] pmic: fsl: Define number of bytes sent at once by MC34708 PMIC   Lukasz Majewski
• [U-Boot] [PATCH v2 03/11] pmic: Add support for setting transmission length in uclass private data   Lukasz Majewski
• [U-Boot] [PATCH v2 04/11] pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions   Lukasz Majewski
• [U-Boot] [PATCH v2 05/11] pmic: dm: Add support for MC34708 for PMIC DM   Lukasz Majewski
• [U-Boot] [PATCH v2 06/11] pmic: Rewrite the pmic command to not only work with single byte transmission   Lukasz Majewski
• [U-Boot] [PATCH v2 07/11] sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission   Lukasz Majewski
• [U-Boot] [PATCH v2 08/11] sandbox: Enable support for MC34708 PMIC in DTS   Lukasz Majewski
• [U-Boot] [PATCH v2 09/11] sandbox: Enable MC34708 PMIC support   Lukasz Majewski
• [U-Boot] [PATCH v2 10/11] sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c   Lukasz Majewski
• [U-Boot] [PATCH v2 11/11] sandbox: tests: Add tests for mc34708 PMIC device   Lukasz Majewski
• [U-Boot] [PATCH v2 08/11] sandbox: Enable support for MC34708 PMIC in DTS   Lukasz Majewski
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Lukasz Majewski
• [U-Boot] [PATCH 2/2] gadget: f_thor: update to support more than 4GB file as thor 5.0   Lukasz Majewski
• [U-Boot] [PATCH v1 00/21] This patch series brings in sync DISPLAY5 internal   Lukasz Majewski
• [U-Boot] [PATCH v1 01/21] display5: factory: Add support for BOOT_FROM = FACTORY switch   Lukasz Majewski
• [U-Boot] [PATCH v1 02/21] display5: config: factory: Setup IP config data according to LEG production setup   Lukasz Majewski
• [U-Boot] [PATCH v1 03/21] display5: config: Add "factory" (1MiB) SPI-NOR partition in u-boot   Lukasz Majewski
• [U-Boot] [PATCH v1 04/21] display5: config: Provide command to flash the whole SPI-NOR memory   Lukasz Majewski
• [U-Boot] [PATCH v1 05/21] display5: spl: Check return code of the env_* functions   Lukasz Majewski
• [U-Boot] [PATCH v1 06/21] display5: config: Reset the board when bootm fails   Lukasz Majewski
• [U-Boot] [PATCH v1 07/21] display5: config: Remove support for Linux initramfs recovery image boot   Lukasz Majewski
• [U-Boot] [PATCH v1 08/21] display5: config: Update SPI-NOR partition for larger swupdate-initramfs   Lukasz Majewski
• [U-Boot] [PATCH v1 09/21] display5: config: factory: Extend mtdparts to support LEG factory partition   Lukasz Majewski
• [U-Boot] [PATCH v1 10/21] display5: Support for the emergency PAD pressing   Lukasz Majewski
• [U-Boot] [PATCH v1 11/21] display5: wdt: Enable WDT support (both SPL and u-boot)   Lukasz Majewski
• [U-Boot] [PATCH v1 12/21] display5: config: Provide 'tftp_mmc_rootfs_bkp' command to write BACKUP rootfs   Lukasz Majewski
• [U-Boot] [PATCH v1 13/21] display5: config: factory: Update BACKUP rootfs in factory mode   Lukasz Majewski
• [U-Boot] [PATCH v1 14/21] display5: config: Update swupdate initramfs file name (now supporting ext4)   Lukasz Majewski
• [U-Boot] [PATCH v1 15/21] display5: ddr: Enable support for DDR3 auto calibration   Lukasz Majewski
• [U-Boot] [PATCH v1 16/21] display5: net: Add function to read ethaddr from iMX6 fuses   Lukasz Majewski
• [U-Boot] [PATCH v1 17/21] display5: config: Add cma=256M to command line arguments   Lukasz Majewski
• [U-Boot] [PATCH v1 18/21] display5: config: Reduce rootfs2 (BACKUP) size from 1528M to 512M   Lukasz Majewski
• [U-Boot] [PATCH v1 19/21] display5: display5_defconfig: Enable support for gpt command (CMD_GPT) in production u-boot   Lukasz Majewski
• [U-Boot] [PATCH v1 20/21] display5: config: Add GPT verification and restoration code on SWUpdate entry   Lukasz Majewski
• [U-Boot] [PATCH v1 21/21] display5: Add missing environment.h include to avoid warning   Lukasz Majewski
• [U-Boot] [PATCH] mx6: remove duplicated BOUNCE_BUFFER defines   Lukasz Majewski
• [U-Boot] [PATCH] bootcount: Add bootcount command   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (13.05.2018)   Lukasz Majewski
• [U-Boot] [PATCH v2 04/11] pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions   Lukasz Majewski
• [U-Boot] [PATCH v2 05/11] pmic: dm: Add support for MC34708 for PMIC DM   Lukasz Majewski
• [U-Boot] [PATCH v2 07/11] sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission   Lukasz Majewski
• [U-Boot] [PATCH v3 00/11] pmic: sandbox: Add support for MC34709 PMIC   Lukasz Majewski
• [U-Boot] [PATCH v3 01/11] pmic: fsl: Provide some more definitions for MC34708 PMIC   Lukasz Majewski
• [U-Boot] [PATCH v3 02/11] pmic: fsl: Define number of bytes sent at once by MC34708 PMIC   Lukasz Majewski
• [U-Boot] [PATCH v3 03/11] pmic: Add support for setting transmission length in uclass private data   Lukasz Majewski
• [U-Boot] [PATCH v3 04/11] pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions   Lukasz Majewski
• [U-Boot] [PATCH v3 05/11] pmic: dm: Add support for MC34708 for PMIC DM   Lukasz Majewski
• [U-Boot] [PATCH v3 06/11] pmic: Rewrite the pmic command to not only work with single byte transmission   Lukasz Majewski
• [U-Boot] [PATCH v3 07/11] sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission   Lukasz Majewski
• [U-Boot] [PATCH v3 08/11] sandbox: Enable support for MC34708 PMIC in DTS   Lukasz Majewski
• [U-Boot] [PATCH v3 09/11] sandbox: Enable MC34708 PMIC support   Lukasz Majewski
• [U-Boot] [PATCH v3 10/11] sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c   Lukasz Majewski
• [U-Boot] [PATCH v3 11/11] sandbox: tests: Add tests for mc34708 PMIC device   Lukasz Majewski
• [U-Boot] [PATCH v1 16/21] display5: net: Add function to read ethaddr from iMX6 fuses   Lukasz Majewski
• [U-Boot] [PULL] Please pull u-boot-imx   Lukasz Majewski
• [U-Boot] IMX6 NAND booting failure   Lukasz Majewski
• [U-Boot] [PATCH v1 0/6] board: k+p: Minor adjustments for K+P imx53 boards   Lukasz Majewski
• [U-Boot] [PATCH v1 1/6] board: imx53: Always disable display before starting kernel   Lukasz Majewski
• [U-Boot] [PATCH v1 2/6] board: Adjust K+P script to run misc (per board) adjustments   Lukasz Majewski
• [U-Boot] [PATCH v1 3/6] board: Add support for KEY1 status detection on K+P's HSC|DDC boards   Lukasz Majewski
• [U-Boot] [PATCH v1 4/6] board: Silent out the console on the K+P's imx53 boards   Lukasz Majewski
• [U-Boot] [PATCH v1 5/6] board: Remove not needed function for the K+P's imx53 board   Lukasz Majewski
• [U-Boot] [PATCH v1 6/6] config: Update defconfig for imx53 K+P boards   Lukasz Majewski
• [U-Boot] [PATCH v1 1/4] spl: record boot_device into spl_image and call spl_perform_fixups   Lukasz Majewski
• [U-Boot] [PATCH v1 2/2] Migrate bootlimit to Kconfig   Lukasz Majewski
• [U-Boot] [PATCH v2] gadget: f_thor: Fix memory leaks of usb request and its buffer   Lukasz Majewski
• [U-Boot] [PATCH v1 1/2] buildman: Extract environment as part of each build   Lukasz Majewski
• [U-Boot] [PATCH v1 3/7] usb: udc: implement DM versions of usb_gadget_initialize()/_release()/_handle_interrupt()   Lukasz Majewski
• [U-Boot] [RFC 1/3] fs: fat: cannot write to subdirectories   Lukasz Majewski
• [U-Boot] [PATCH v7 00/18] Add fastboot UDP support   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (30.05.2018)   Lukasz Majewski
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Manjukumar Harthikote Matha
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Manjukumar Harthikote Matha
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Manjukumar Harthikote Matha
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Manjukumar Harthikote Matha
• [U-Boot] [xHCI] Controller failure with USB 3.0 hub   Bin Meng
• [U-Boot] [xHCI] Controller failure with USB 3.0 hub   Bin Meng
• [U-Boot] [xHCI] Controller failure with USB 3.0 hub   Bin Meng
• [U-Boot] [PATCH] x86: tsc: add support for reading CPU freq from cpuid   Bin Meng
• [U-Boot] [PATCH v1] x86: acpi: Adopt new version of iASL compiler   Bin Meng
• [U-Boot] [PATCH 1/2] dm: pci: make ranges dt property optional   Bin Meng
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   Bin Meng
• [U-Boot] [PATCH v2 1/2] x86: TunnelCreek: switch P state to the highest freq   Bin Meng
• [U-Boot] [PATCH 1/4] usb: xhci: Set accurate add context flags when updating hub attributes   Bin Meng
• [U-Boot] [PATCH 2/4] usb: xhci: Initialize dev_state to 0 in the input slot context   Bin Meng
• [U-Boot] [PATCH 3/4] usb: xhci: Fix config fail of FS hub behind a HS hub with MTT   Bin Meng
• [U-Boot] [PATCH 4/4] usb: xhci: Handle endianness in xhci_set_configuration()   Bin Meng
• [U-Boot] [PATCH] x86: baytrail: Correct the comment of IACORE_VIDS bit ranges   Bin Meng
• [U-Boot] [PATCH] x86: tsc: add support for reading CPU freq from cpuid   Bin Meng
• [U-Boot] [PATCH v1] x86: acpi: Adopt new version of iASL compiler   Bin Meng
• [U-Boot] [PATCH] x86: baytrail: Correct the comment of IACORE_VIDS bit ranges   Bin Meng
• [U-Boot] ls1021atwr: Convert to use driver model TSEC driver   Bin Meng
• [U-Boot] [PATCH] twister: Let SPL load U-Boot from MMC   Ladislav Michl
• [U-Boot] [PATCH 4/4] board: turris_mox: Add gpio command to defconfig   Ladislav Michl
• [U-Boot] [PATCH v1] ubifs: avoid assert failed in ubifs.c   Ladislav Michl
• [U-Boot] Re-introducing support for OLD hardware   Jason Mitchell
• [U-Boot] How to update Uart0 from default Uart1   Mohan
• [U-Boot] [PATCH 1/2] ARM: dts: exynos5: remove the duplicated nodes   Anand Moon
• [U-Boot] [PATCH v1] x86: acpi: Adopt new version of iASL compiler   Moore, Robert
• [U-Boot] Signed FIT image boots without public key   Nelson, Mark
• [U-Boot] [PATCH] arm: mvebu: switch clearfog to use device-tree i2c and gpio   Jon Nettleton
• [U-Boot] [PATCH 2/2] ARM: Add a new arch + board for QEMU's 'virt' machine   Paulo Neves
• [U-Boot] [PATCH v2 3/3] net: designware: Add reset ctrl to driver   Nguyen, Dinh
• [U-Boot] [PATCH v2 2/3] serial: ns16550: Add reset ctrl to driver   Nguyen, Dinh
• [U-Boot] [PATCH v2 0/3] drivers: Add reset ctrl to drivers   Dinh Nguyen
• [U-Boot] [U-Boot, v3, 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Dinh Nguyen
• [U-Boot] [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY   Jun Nie
• [U-Boot] [PATCH v2] sunxi: add support for Banana Pi M2 Zero board   Jun Nie
• [U-Boot] [PATCH v2] sunxi: add support for Banana Pi M2 Zero board   Jun Nie
• [U-Boot] [PATCH 1/4] mx7: psci: add cpu hotplug support   Bryan O'Donoghue
• [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification   Igor Opaniuk
• [U-Boot] [PATCH 0/8] Initial integration of AVB2.0   Igor Opaniuk
• [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification   Igor Opaniuk
• [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification   Igor Opaniuk
• [U-Boot] [PATCH 8/8] doc: avb2.0: add README about AVB2.0 integration   Igor Opaniuk
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Chris Packham
• [U-Boot] u-boot Marvell ethernet switch development   Chris Packham
• [U-Boot] [PATCH 2/2] net: bootp: Fix compile error processing ntpserver option   Chris Packham
• [U-Boot] [PATCH v2 1/2] net: Add Kconfig option for BOOTP_NTPSERVER   Chris Packham
• [U-Boot] [PATCH v2 2/2] net: bootp: Fix compile error processing ntpserver option   Chris Packham
• [U-Boot] [PATCH 1/2] net: mvgbe: remove CONFIG_DOVE   Chris Packham
• [U-Boot] [PATCH 2/2] net: add Kconfig for MVGBE   Chris Packham
• [U-Boot] [PATCH 2/2] net: add Kconfig for MVGBE   Chris Packham
• [U-Boot] [PATCH 2/5] ARM: arm926ejs: fix lowlevel_init call   Chris Packham
• [U-Boot] [PATCH 2/5] ARM: arm926ejs: fix lowlevel_init call   Chris Packham
• [U-Boot] [PATCH 2/5] ARM: arm926ejs: fix lowlevel_init call   Chris Packham
• [U-Boot] [UNTESTED PATCH] ARM: orion5x: fix use of callee-saved registers in lowloevel_init   Chris Packham
• [U-Boot] [PATCH] spi: kirkwood: add orion-spi compatible string   Chris Packham
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Chris Packham
• [U-Boot] [PATCH 00/12] kirkwood: device tree support   Chris Packham
• [U-Boot] [PATCH 01/12] ARM: add devicetree files for kirkwood SoC   Chris Packham
• [U-Boot] [PATCH 02/12] ARM: kirkwood: Add device-tree for dns325   Chris Packham
• [U-Boot] [PATCH 03/12] ARM: kirkwood: Add device-tree for dockstar   Chris Packham
• [U-Boot] [PATCH 04/12] ARM: kirkwood: Add device-tree for goflexhome   Chris Packham
• [U-Boot] [PATCH 05/12] ARM: kirkwood: Add device-tree for guruplug   Chris Packham
• [U-Boot] [PATCH 06/12] ARM: kirkwood: Add device-tree for ib62x0   Chris Packham
• [U-Boot] [PATCH 07/12] ARM: kirkwood: Add device-tree for iconnect   Chris Packham
• [U-Boot] [PATCH 08/12] ARM: kirkwood: Add device-tree for nas220   Chris Packham
• [U-Boot] [PATCH 09/12] ARM: kirkwood: Add device-tree for nsa310s   Chris Packham
• [U-Boot] [PATCH 10/12] ARM: kirkwood: Add device-tree for openrd   Chris Packham
• [U-Boot] [PATCH 11/12] ARM: kirkwood: Add device-tree for pogo_e02   Chris Packham
• [U-Boot] [PATCH 12/12] ARM: kirkwood: Add device-tree for sheevaplug   Chris Packham
• [U-Boot] [PATCH 09/12] ARM: kirkwood: Add device-tree for nsa310s   Chris Packham
• [U-Boot] [PATCH v3 0/6] ARM: mvebu: a38x: updates to ddr training code   Chris Packham
• [U-Boot] [PATCH v3 1/6] ARM: mvebu: a38x: move definition of PEX_CFG_DIRECT_ACCESS   Chris Packham
• [U-Boot] [PATCH v3 2/6] ARM: mvebu: a38x: move sys_env_device_rev_get   Chris Packham
• [U-Boot] [PATCH v3 3/6] ARM: mvebu: a38x: remove some unused code   Chris Packham
• [U-Boot] [PATCH v3 4/6] ARM: mvebu: a38x: sync ddr training code with upstream   Chris Packham
• [U-Boot] [PATCH v3 5/6] ARM: mvebu: a38x: restore support for setting timing   Chris Packham
• [U-Boot] [PATCH v3 6/6] ARM: mvebu: a38x: use non-zero size for ddr scrubbing   Chris Packham
• [U-Boot] Please pull u-boot-marvell/master   Chris Packham
• [U-Boot] [PATCH] ARM: mvebu: a38x: Add missing SPDX license identfier   Chris Packham
• [U-Boot] [PATCH 09/12] ARM: kirkwood: Add device-tree for nsa310s   Chris Packham
• [U-Boot] [PATCH] ARM: re-enable MVGBE for edminiv2   Chris Packham
• [U-Boot] [PATCH] Remove CONFIG_MVGBE from config_whitelist.txt   Chris Packham
• [U-Boot] Please pull u-boot-marvell/master   Chris Packham
• [U-Boot] Please pull u-boot-marvell/master   Chris Packham
• [U-Boot] [PATCH] net: MVGBE don't automatically select PHYLIB   Chris Packham
• [U-Boot] Please pull u-boot-marvell/master   Chris Packham
• [U-Boot] [PATCH] arm: kirkwood: openrd: Change environment location   Chris Packham
• [U-Boot] [PATCH 0/6] ARM: kirkwood: dts conversion round 2   Chris Packham
• [U-Boot] [PATCH 1/6] ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2   Chris Packham
• [U-Boot] [PATCH 2/6] ARM: kirkwood: Add device-tree for dreamplug   Chris Packham
• [U-Boot] [PATCH 3/6] ARM: kirkwood: Add device-tree for ds109   Chris Packham
• [U-Boot] [PATCH 4/6] ARM: kirkwood: Add device-tree for lschlv2 & lsxhl   Chris Packham
• [U-Boot] [PATCH 5/6] ARM: kirkwood: Add device-tree for netspace & inetspace   Chris Packham
• [U-Boot] [PATCH 6/6] ARM: kirkwood: Add device-tree for keymile   Chris Packham
• [U-Boot] [PATCH] net: MVGBE don't automatically select PHYLIB   Chris Packham
• [U-Boot] [PATCH v2] net: MVGBE don't automatically select PHYLIB   Chris Packham
• [U-Boot] [PATCH] net: MVGBE don't automatically select PHYLIB   Chris Packham
• [U-Boot] U-Boot thumb interlink patches   Chris Packham
• [U-Boot] [PATCH] Remove CONFIG_MVGBE from config_whitelist.txt   Chris Packham
• [U-Boot] [PATCH] configs: remove empty #ifdef block from mv-common.h   Chris Packham
• [U-Boot] [PATCH 1/2] configs: remove redundant comment sections   Chris Packham
• [U-Boot] [PATCH 2/2] configs: remove CONFIG_SYS_MVFS   Chris Packham
• [U-Boot] [RFC] arm: mvebu: Add Helios4 Armada 38x initial support   Chris Packham
• [U-Boot] [PATCH v2] Remove CONFIG_MVGBE from config_whitelist.txt   Chris Packham
• [U-Boot] [PATCH] patman: add option for limiting the Cc list   Chris Packham
• [U-Boot] [PATCH] patman: add option for limiting the Cc list   Chris Packham
• [U-Boot] [PATCH v2] patman: add option for limiting the Cc list   Chris Packham
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Chris Packham
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Chris Packham
• [U-Boot] [PATCH 1/2] ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled   Chris Packham
• [U-Boot] [PATCH 2/2] ARM: add SBx81LIFKW board   Chris Packham
• [U-Boot] [PATCH 1/2] drivers/rtc: prepare mvrtc for DM conversion   Chris Packham
• [U-Boot] [PATCH 2/2] drivers/rtc: convert mvrtc to DM   Chris Packham
• [U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes   Chris Packham
• [U-Boot] [PATCH] arm: mvebu: switch clearfog to use device-tree i2c and gpio   Chris Packham
• [U-Boot] Remove CONFIG_MVGBE from config_whitelist.txt   Chris Packham
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Chris Packham
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Chris Packham
• [U-Boot] [PATCH] arm: mvebu: switch clearfog to use device-tree i2c and gpio   Chris Packham
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Chris Packham
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Chris Packham
• [U-Boot] [PATCH v2 1/2] ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled   Chris Packham
• [U-Boot] [PATCH v2 2/2] ARM: add SBx81LIFKW board   Chris Packham
• [U-Boot] [PATCH] net: mvgbe: extract common code for SMI wait   Chris Packham
• [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 2/2] zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/2] mmc: sdhci: Update sdhci_send_command() to handle HS200   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/2] mmc: zynqmp: Add HS200 modes support for ZynqMP   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] sf: Enable FSR polling on N25Q256(A)   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/3] cmd: fpga: Reorder the arguments parsing code   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/3] cmd: fpga: Add support to load secure bitstreams   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 3/3] fpga: zynqmp: Add secure bitstream loading for ZynqMP   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 1/2] mmc: sdhci: Update sdhci_send_command() to handle HS200   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 2/2] mmc: zynqmp: Add HS200 modes support for ZynqMP   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/3] cmd: fpga: Reorder the arguments parsing code   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/3] cmd: fpga: Add support to load secure bitstreams   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] xilinx: zynq: Add support to secure images   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 1/3] cmd: fpga: Reorder the arguments parsing code   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 2/3] cmd: fpga: Add support to load secure bitstreams   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 3/3] fpga: zynqmp: Add secure bitstream loading for ZynqMP   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] xilinx: zynq: Add support to secure images   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 0/2] ARC: enable debug uart for HSDK and AXS10x boards   Eugeniy Paltsev
• [U-Boot] [PATCH 1/2] ARC: init debug uart in early common arc code   Eugeniy Paltsev
• [U-Boot] [PATCH 2/2] ARC: enable debug uart for HSDK and AXS10x boards   Eugeniy Paltsev
• [U-Boot] [PATCH v4] arm64: Add SMC and HVC commands   Michalis Pappas
• [U-Boot] [PATCH v4] arm64: Add SMC and HVC commands   Michalis Pappas
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   DATACOM - Paulo.Zaneti
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   DATACOM - Paulo.Zaneti
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   DATACOM - Paulo.Zaneti
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   DATACOM - Paulo.Zaneti
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   DATACOM - Paulo.Zaneti
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   DATACOM - Paulo.Zaneti
• [U-Boot] [U-Boot,V2] imx: mx7: psci: add system reset support   Trent Piepho
• [U-Boot] [U-Boot,V2] imx: mx7: psci: add system reset support   Trent Piepho
• [U-Boot] [U-Boot,V2] imx: mx7: psci: add system reset support   Trent Piepho
• [U-Boot] [PATCH] power: pmic: Let PFUZE3000 see all 256 registers   Trent Piepho
• [U-Boot] [PATCH] imx: mx7: psci: Add support for version command   Trent Piepho
• [U-Boot] [PATCH] rtc: Add read8 and write8 support to isl1208 driver   Trent Piepho
• [U-Boot] [PATCH] stm32f429-disco: ram: Adds stm32f429-disco fixes for HardFault at booting   Radoslaw Pietrzyk
• [U-Boot] [PATCH v2] ram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at booting   Radoslaw Pietrzyk
• [U-Boot] [PATCH] stm32f429-disco: ram: Adds stm32f429-disco fixes for HardFault at booting   Radosław Pietrzyk
• [U-Boot] [PATCH 1/2] board: move ppa header address in board specific kconfig   Vinitha V Pillai
• [U-Boot] [PATCH 2/2] LS1012AFRWY: Add Secure Boot support   Vinitha V Pillai
• [U-Boot] [U-Boot,RFC] rockchip: asus c201 support   Marty E. Plummer
• [U-Boot] [PATCH 0/3] add support for the asus C201 chromebook (4GiB)   Marty E. Plummer
• [U-Boot] [PATCH 1/3] sf: Add GigaDevice gd25q32b entry   Marty E. Plummer
• [U-Boot] [PATCH 2/3] rockchip: add support for veyron-speedy (ASUS Chromebook C201)   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 2/3] rockchip: add support for veyron-speedy (ASUS Chromebook C201)   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 0/3] add support for the asus C201 chromebook (4GiB)   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Marty E. Plummer
• [U-Boot] [PATCH 4/8] cmd: avb2.0: avb command for performing verification   Sam Protsenko
• [U-Boot] [PATCH 5/8] avb2.0: add boot states and dm-verity support   Sam Protsenko
• [U-Boot] [PATCH 6/8] am57xx_hs: avb2.0: add support of AVB 2.0   Sam Protsenko
• [U-Boot] [PATCH 8/8] doc: avb2.0: add README about AVB2.0 integration   Sam Protsenko
• [U-Boot] Appended DTB Android boot image support   Sam Protsenko
• [U-Boot] [PATCH v4 00/14] Add fastboot UDP support   Sam Protsenko
• [U-Boot] [RFC PATCH v2 1/2] usb: fastboot: Convert USB f_fastboot to shared fastboot   Sam Protsenko
• [U-Boot] [U-Boot, v2, 1/2] common: Add support for Android DT image   Sam Protsenko
• [U-Boot] [PATCH] disk: efi: Correct backing up the MBR boot code   Sam Protsenko
• [U-Boot] [PATCH v6 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Sam Protsenko
• [U-Boot] [PATCH v6 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Sam Protsenko
• [U-Boot] [PATCH v6 17/18] usb: fastboot: Convert USB f_fastboot to shared fastboot   Sam Protsenko
• [U-Boot] [PATCH] Import Android's dt_table.h for DT image format   Sam Protsenko
• [U-Boot] [PATCH] disk: efi: Correct backing up the MBR boot code   Sam Protsenko
• [U-Boot] [PATCH v8 00/18] Add fastboot UDP support   Sam Protsenko
• [U-Boot] [linux-sunxi] Re: [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v6 0/7] sunxi: sync H3, H5, A64 DTs from mainline Linux   Andre Przywara
• [U-Boot] [PATCH v6 1/7] sunxi: DT: A64: update device tree file for Allwinner A64 SoC   Andre Przywara
• [U-Boot] [PATCH v6 2/7] sunxi: DT: A64: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v6 3/7] sunxi: DT: update device tree files for Allwinner H3 and H5 SoCs   Andre Przywara
• [U-Boot] [PATCH v6 4/7] sunxi: DT: H5: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v6 5/7] sunxi: DT: H3: update board .dts files from Linux   Andre Przywara
• [U-Boot] [PATCH v6 6/7] sunxi: DT: A64: add proper SoPine baseboard device tree   Andre Przywara
• [U-Boot] [PATCH v6 7/7] sunxi: DT: A64: add Pine64-LTS support   Andre Przywara
• [U-Boot] [RFC PATCH 0/3] sunxi: extend SPL header to propagate DRAM size   Andre Przywara
• [U-Boot] [RFC PATCH 1/3] sunxi: Extend SPL header versioning   Andre Przywara
• [U-Boot] [RFC PATCH 2/3] sunxi: board.c: refactor SPL header checks   Andre Przywara
• [U-Boot] [RFC PATCH 3/3] sunxi: store DRAM size in SPL header   Andre Przywara
• [U-Boot] [RFC PATCH 0/3] sunxi: extend SPL header to propagate DRAM size   Andre Przywara
• [U-Boot] [RFC PATCH 1/3] sunxi: Extend SPL header versioning   Andre Przywara
• [U-Boot] [PATCH v6 0/7] sunxi: sync H3, H5, A64 DTs from mainline Linux   Andre Przywara
• [U-Boot] [PATCH V6 1/2] imx6: Convert sabrelite and nitrogen6x boards to distro boot support   Denis Pynkin
• [U-Boot] Uboot Hangs when Initrd size increses   Clément Péron
• [U-Boot] FitImage add pubkey signature in DTS   Clément Péron
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Jorge Ramirez-Ortiz
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Jorge Ramirez-Ortiz
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Jorge Ramirez-Ortiz
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Jorge Ramirez-Ortiz
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] MAINTAINERS: Take over DB410c maintainership   Jorge Ramirez-Ortiz
• [U-Boot] IMX6 NAND booting failure   Rasheed, Abdul
• [U-Boot] [PATCH] sf: Add support for ISSI is25wp   Kimmo Rautkoski
• [U-Boot] [PATCH v3 00/25] Introduce TPMv2.0 support   Miquel Raynal
• [U-Boot] [PATCH v3 01/25] tpm: add Revision ID field in the chip structure   Miquel Raynal
• [U-Boot] [PATCH v3 02/25] tpm: prepare introduction of TPMv2.x support in Kconfig   Miquel Raynal
• [U-Boot] [PATCH v3 03/25] tpm: disociate TPMv1.x specific and generic code   Miquel Raynal
• [U-Boot] [PATCH v3 04/25] tpm: prepare support for TPMv2.x commands   Miquel Raynal
• [U-Boot] [PATCH v3 05/25] tpm: add macros to enhance TPM commands readability   Miquel Raynal
• [U-Boot] [PATCH v3 06/25] tpm: add possible traces to analyze buffers returned by the TPM   Miquel Raynal
• [U-Boot] [PATCH v3 07/25] tpm: report driver error code to upper layer   Miquel Raynal
• [U-Boot] [PATCH v3 08/25] tpm: add TPM2_Startup command support   Miquel Raynal
• [U-Boot] [PATCH v3 09/25] tpm: add TPM2_SelfTest command support   Miquel Raynal
• [U-Boot] [PATCH v3 10/25] tpm: add TPM2_Clear command support   Miquel Raynal
• [U-Boot] [PATCH v3 11/25] tpm: add TPM2_PCR_Extend command support   Miquel Raynal
• [U-Boot] [PATCH v3 12/25] tpm: add TPM2_PCR_Read command support   Miquel Raynal
• [U-Boot] [PATCH v3 13/25] tpm: add TPM2_GetCapability command support   Miquel Raynal
• [U-Boot] [PATCH v3 14/25] tpm: add dictionary attack mitigation commands support   Miquel Raynal
• [U-Boot] [PATCH v3 15/25] tpm: add TPM2_HierarchyChangeAuth command support   Miquel Raynal
• [U-Boot] [PATCH v3 16/25] tpm: add PCR authentication commands support   Miquel Raynal
• [U-Boot] [PATCH v3 17/25] tpm: add support for TPMv2.x SPI modules   Miquel Raynal
• [U-Boot] [PATCH v3 18/25] tpm: add the possibility to reset the chip with a gpio   Miquel Raynal
• [U-Boot] [PATCH v3 19/25] doc: device-tree-bindings: add ST33TPHF20 TPMv2.0 module info   Miquel Raynal
• [U-Boot] [PATCH v3 20/25] test/py: add TPMv2.x test suite   Miquel Raynal
• [U-Boot] [PATCH v3 21/25] tpm: add a Sandbox TPMv2.x driver   Miquel Raynal
• [U-Boot] [PATCH v3 22/25] doc: device-tree-bindings: add Sandbox TPMv2.0 module info   Miquel Raynal
• [U-Boot] [PATCH v3 23/25] sandbox: dts: add Sandbox TPMv2.x node   Miquel Raynal
• [U-Boot] [PATCH v3 24/25] configs: add TPMv2.x support in Sandbox   Miquel Raynal
• [U-Boot] [PATCH v3 25/25] tpm: allow Sandbox to run TPMv2.x commands   Miquel Raynal
• [U-Boot] [PATCH v3 04/25] tpm: prepare support for TPMv2.x commands   Miquel Raynal
• [U-Boot] [PATCH v3 22/25] doc: device-tree-bindings: add Sandbox TPMv2.0 module info   Miquel Raynal
• [U-Boot] [PATCH v3 25/25] tpm: allow Sandbox to run TPMv2.x commands   Miquel Raynal
• [U-Boot] [PATCH v3 03/25] tpm: disociate TPMv1.x specific and generic code   Miquel Raynal
• [U-Boot] [PATCH v3 12/25] tpm: add TPM2_PCR_Read command support   Miquel Raynal
• [U-Boot] [PATCH v3 13/25] tpm: add TPM2_GetCapability command support   Miquel Raynal
• [U-Boot] [PATCH v3 17/25] tpm: add support for TPMv2.x SPI modules   Miquel Raynal
• [U-Boot] [PATCH v3 03/25] tpm: disociate TPMv1.x specific and generic code   Miquel Raynal
• [U-Boot] [PATCH v4 00/32] Introduce TPMv2.0 support   Miquel Raynal
• [U-Boot] [PATCH v4 01/32] tpm: remove redundant blank line   Miquel Raynal
• [U-Boot] [PATCH v4 02/32] tpm: remove extra spaces between a function and its opening bracket   Miquel Raynal
• [U-Boot] [PATCH v4 03/32] tpm: substitute deprecated uint<x>_t types with their u<x> equivalent   Miquel Raynal
• [U-Boot] [PATCH v4 04/32] tpm: align arguments with open parenthesis   Miquel Raynal
• [U-Boot] [PATCH v4 05/32] tpm: use the BIT() macro where applicable   Miquel Raynal
• [U-Boot] [PATCH v4 06/32] tpm: fix spelling   Miquel Raynal
• [U-Boot] [PATCH v4 07/32] tpm: add extra blank lines between declarations and code   Miquel Raynal
• [U-Boot] [PATCH v4 08/32] tpm: add Revision ID field in the chip structure   Miquel Raynal
• [U-Boot] [PATCH v4 09/32] tpm: prepare introduction of TPMv2.x support in Kconfig   Miquel Raynal
• [U-Boot] [PATCH v4 10/32] tpm: disociate TPMv1.x specific and generic code   Miquel Raynal
• [U-Boot] [PATCH v4 11/32] tpm: add missing parameter in private data structure description   Miquel Raynal
• [U-Boot] [PATCH v4 12/32] tpm: prepare support for TPMv2.x commands   Miquel Raynal
• [U-Boot] [PATCH v4 13/32] tpm: add macros to enhance TPM commands readability   Miquel Raynal
• [U-Boot] [PATCH v4 14/32] tpm: add possible traces to analyze buffers returned by the TPM   Miquel Raynal
• [U-Boot] [PATCH v4 15/32] tpm: report driver error code to upper layer   Miquel Raynal
• [U-Boot] [PATCH v4 16/32] tpm: add TPM2_Startup command support   Miquel Raynal
• [U-Boot] [PATCH v4 17/32] tpm: add TPM2_SelfTest command support   Miquel Raynal
• [U-Boot] [PATCH v4 18/32] tpm: add TPM2_Clear command support   Miquel Raynal
• [U-Boot] [PATCH v4 19/32] tpm: add TPM2_PCR_Extend command support   Miquel Raynal
• [U-Boot] [PATCH v4 20/32] tpm: add TPM2_PCR_Read command support   Miquel Raynal
• [U-Boot] [PATCH v4 21/32] tpm: add TPM2_GetCapability command support   Miquel Raynal
• [U-Boot] [PATCH v4 22/32] tpm: add dictionary attack mitigation commands support   Miquel Raynal
• [U-Boot] [PATCH v4 23/32] tpm: add TPM2_HierarchyChangeAuth command support   Miquel Raynal
• [U-Boot] [PATCH v4 24/32] tpm: add PCR authentication commands support   Miquel Raynal
• [U-Boot] [PATCH v4 25/32] tpm: add support for TPMv2.x SPI modules   Miquel Raynal
• [U-Boot] [PATCH v4 26/32] tpm: add the possibility to reset the chip with a gpio   Miquel Raynal
• [U-Boot] [PATCH v4 27/32] doc: device-tree-bindings: add TIS TPMv2.0 SPI module info   Miquel Raynal
• [U-Boot] [PATCH v4 28/32] test/py: add TPMv2.x test suite   Miquel Raynal
• [U-Boot] [PATCH v4 29/32] tpm: add a Sandbox TPMv2.x driver   Miquel Raynal
• [U-Boot] [PATCH v4 30/32] doc: device-tree-bindings: add Sandbox TPMv2.0 module info   Miquel Raynal
• [U-Boot] [PATCH v4 31/32] sandbox: dts: add Sandbox TPMv2.x node   Miquel Raynal
• [U-Boot] [PATCH v4 32/32] configs: add TPMv2.x support in Sandbox   Miquel Raynal
• [U-Boot] [PATCH v4 25/32] tpm: add support for TPMv2.x SPI modules   Miquel Raynal
• [U-Boot] [PATCH v4 26/32] tpm: add the possibility to reset the chip with a gpio   Miquel Raynal
• [U-Boot] [PATCH v5] tpm2: tis_spi: add the possibility to reset the chip with a gpio   Miquel Raynal
• [U-Boot] [U-Boot, v4, 09/32] tpm: prepare introduction of TPMv2.x support in Kconfig   Miquel Raynal
• [U-Boot] Signed FIT image boots without public key   Teddy Reed
• [U-Boot] [PATCH] MAINTAINERS: Switch to Alison's nxp.com address   Tom Rini
• [U-Boot] [ANN] U-Boot v2018.05-rc3 released   Tom Rini
• [U-Boot] [PATCH] bootm.c: Correct the flush_len used in bootm_load_os()   Tom Rini
• [U-Boot] [PATCH v3 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Tom Rini
• [U-Boot] [PATCH] add common.h include to stdio_dev.h   Tom Rini
• [U-Boot] [PATCH] stdio_dev.h: Drop the video section as it is unused   Tom Rini
• [U-Boot] [PATCH v2] MAINTAINERS: Switch nxp.com domain   Tom Rini
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [PATCH] board: ti: am43: Fix DCDC3 voltage for epos-evm   Tom Rini
• [U-Boot] [PATCH] stdio_dev.h: Drop the video section as it is unused   Tom Rini
• [U-Boot] [PATCHv2 1/2] stdio_dev.h: Drop the video section as it is unused   Tom Rini
• [U-Boot] [PATCHv2 2/2] stdio_names: Ensure MAX_NAMES is defined before use, don't use 3 directly   Tom Rini
• [U-Boot] [PATCHv2 2/2] stdio_names: Ensure MAX_NAMES is defined before use, don't use 3 directly   Tom Rini
• [U-Boot] [PATCH] arm: mach-omap2: cache: Explicitly enable I cache   Tom Rini
• [U-Boot] Logo for U-Boot   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH v2 01/10] ram: Add driver for MPC83xx   Tom Rini
• [U-Boot] [PATCH 3/5] api: Flush cache when closing api   Tom Rini
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   Tom Rini
• [U-Boot] Logo for U-Boot   Tom Rini
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   Tom Rini
• [U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access   Tom Rini
• [U-Boot] README.sandbox: small typos   Tom Rini
• [U-Boot] board: ti: am43: Fix DCDC3 voltage for epos-evm   Tom Rini
• [U-Boot] Kconfig: Add dependency on HASH to verified boot   Tom Rini
• [U-Boot] [U-Boot, PATCHv2, 1/2] stdio_dev.h: Drop the video section as it is unused   Tom Rini
• [U-Boot] [U-Boot, PATCHv2, 2/2] stdio_names: Ensure MAX_NAMES is defined before use, don't use 3 directly   Tom Rini
• [U-Boot] arm: mach-omap2: cache: Explicitly enable I cache   Tom Rini
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Tom Rini
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Tom Rini
• [U-Boot] [PATCH 0/2] SPDX: Convert tags to Linux Kernel style   Tom Rini
• [U-Boot] [PATCH 2/2] SPDX: Convert all of our multiple license tags to Linux Kernel style   Tom Rini
• [U-Boot] [PATCH 2/2] SPDX: Convert all of our multiple license tags to Linux Kernel style   Tom Rini
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Tom Rini
• [U-Boot] [PATCH] git-mailrc: Update some addresses and aliases   Tom Rini
• [U-Boot] [PATCH] git-mailrc: Update some addresses and aliases   Tom Rini
• [U-Boot] [PATCH 2/2] SPDX: Convert all of our multiple license tags to Linux Kernel style   Tom Rini
• [U-Boot] [PATCH 1/2] SPDX: Convert all of our single license tags to Linux Kernel style   Tom Rini
• [U-Boot] [ANN] U-Boot v2018.05 released   Tom Rini
• [U-Boot] [PATCH 0/2] SPDX: Convert tags to Linux Kernel style   Tom Rini
• [U-Boot] [PATCH] SPDX: Convert a few files that were missed before   Tom Rini
• [U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access   Tom Rini
• [U-Boot] [PATCH 1/1] tools/file2include: create Linux style SPDX header   Tom Rini
• [U-Boot] [PATCH 1/1] board: arm: Add support for Broadcom BCM7445D0   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] arm: psci: save context id for cpu_on PSCI command   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] arm: psci: add a weak function psci_arch_cpu_entry   Tom Rini
• [U-Boot] [U-Boot,v2,3/3] arm: stm32mp1: add PSCI support   Tom Rini
• [U-Boot] [U-Boot, 1/6] ls102xa: psci: save context id in cpu_on command   Tom Rini
• [U-Boot] [U-Boot, 2/6] imx7: psci: save context id in cpu_on command   Tom Rini
• [U-Boot] [U-Boot, 2/6] imx7: psci: save context id in cpu_on command   Tom Rini
• [U-Boot] [U-Boot, 3/6] tegra: psci: save context id in cpu_on command   Tom Rini
• [U-Boot] [U-Boot, 4/6] uniphier: psci: save context id in cpu_on command   Tom Rini
• [U-Boot] [U-Boot, 5/6] sunxi: psci: save context id in cpu_on command   Tom Rini
• [U-Boot] [U-Boot, 6/6] psci: arm: remove armv7 function psci_save_target_pc   Tom Rini
• [U-Boot] [U-Boot,v2,1/4] regmap: clean up regmap allocation   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] dm: ofnode: add ofnode_device_is_compatible() helper   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] regmap: change regmap_init_mem() to take ofnode instead udevice   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] syscon: add Linux-compatible syscon API   Tom Rini
• [U-Boot] test: regmap: test Linux-compatible syscon_node_to_regmap()   Tom Rini
• [U-Boot] test: ofnode: test ofnode_device_is_compatible()   Tom Rini
• [U-Boot] [U-Boot, v2, 1/7] arm: v7: Update VBAR only if available   Tom Rini
• [U-Boot] [U-Boot, v2, 2/7] arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A   Tom Rini
• [U-Boot] [U-Boot,v2,3/7] arm: v7: Kconfig: Add entry for MMU   Tom Rini
• [U-Boot] [U-Boot, v2, 4/7] arm: v7: Kconfig: Introduce SYS_ARM_CACHE_CP15   Tom Rini
• [U-Boot] [U-Boot,v2,5/7] arm: v7R: Add initial support   Tom Rini
• [U-Boot] [U-Boot,v2,6/7] arm: v7R: Add support for MPU   Tom Rini
• [U-Boot] [U-Boot, v2, 7/7] arm: v7R: Add support for enabling caches   Tom Rini
• [U-Boot] [PATCH] arm: armv7m: Clean up some thumb / compiler flag options   Tom Rini
• [U-Boot] [PATCHv2 1/3] at91: Minor tweaks to SPL logic for space savings on smartweb   Tom Rini
• [U-Boot] [PATCHv2 2/3] buildman: support newer gcc versions from kernel.org   Tom Rini
• [U-Boot] [PATCHv2 3/3] .travis.yml: Further optimizations   Tom Rini
• [U-Boot] [PATCH] lib/Kconfig: Mark OF_LIBFDT_OVERLAY as depending on OF_LIBFDT   Tom Rini
• [U-Boot] [PATCH] Licenses/README: Update some style and add explicit license to the document   Tom Rini
• [U-Boot] [U-Boot, 1/3] fastboot: sparse: remove redundant argument to write_sparse_image   Tom Rini
• [U-Boot] [U-Boot, 2/3] fastboot: sparse: make write_sparse_image useable for non-fastboot   Tom Rini
• [U-Boot] [U-Boot,3/3] mmc: support writing sparse images   Tom Rini
• [U-Boot] [U-Boot, v4, 1/3] dm: led: Support "default-state" property   Tom Rini
• [U-Boot] [U-Boot, v4, 2/3] dm: led: auto probe() LEDs with "default-state"   Tom Rini
• [U-Boot] [U-Boot, v4, 3/3] dm: led: add testcase for "default-state" property   Tom Rini
• [U-Boot] clk: clk_stm32f: Use PLLSAIP as USB 48MHz clock   Tom Rini
• [U-Boot] [U-Boot,v2,u-boot] ARM: meson: rename GXBB to GX   Tom Rini
• [U-Boot] [U-Boot, u-boot, 1/2] ARM64: meson: Sync DT and Bindings with Linux 4.16   Tom Rini
• [U-Boot] [U-Boot, u-boot, 2/2] pinctrl: meson: Update pinmux with new Linux bindings   Tom Rini
• [U-Boot] [U-Boot,v4] arm64: Add SMC and HVC commands   Tom Rini
• [U-Boot] pci: intel: Add Intel FPGA PCIe controller driver   Tom Rini
• [U-Boot] [U-Boot, 1/2] gpio: atmel_pio4: add drive strength macros   Tom Rini
• [U-Boot] [U-Boot, 2/2] board: atmel: sama5d2_ptc_ek: update pin configuration for NAND   Tom Rini
• [U-Boot] [U-Boot,u-boot] adc: add Amlogic Meson SAR ADC driver   Tom Rini
• [U-Boot] gpio: atmel_pio4: give a full configuration when muxing pins   Tom Rini
• [U-Boot] board: sama5d2_ptc_ek: adjust the smc timings of nand   Tom Rini
• [U-Boot] configs: at91: sama5: updated mtdparts variable in bootargs   Tom Rini
• [U-Boot] board: sama5d27_som1_ek: Fix the USB vbus power   Tom Rini
• [U-Boot] defconfig: at91-sama5d2_ptc_ek: remove unused SYS_EXTRA_OPTIONS   Tom Rini
• [U-Boot] [U-Boot, 1/3] arm: dra76: fastboot: extend cpu type for getvar command   Tom Rini
• [U-Boot] [U-Boot, 1/2] configs: TI: Enable FIT Library overlay support   Tom Rini
• [U-Boot] [U-Boot,2/2] env: ti: android: boot with FIT Image   Tom Rini
• [U-Boot] arm: controlcenterdc: Add spi-flash compatible strings   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 1/2] stm32mp: regulator: add SoC pwr regulator support   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 2/2] ARM: dts: stm32mp157: Add SoC pwr regulator entry   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 1/4] power: regulator: Add support for stm32-vrefbuf   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 2/4] clk: stm32mp1: Add VREF clock gating   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 3/4] configs: stm32mp15: Enable STM32_VREFBUF flag   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 4/4] ARM: dts: stm32mp157: Add vrefbuf DT node   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 1/4] power: regulator: stpmu1: Introduce stpmu1 driver   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 2/4] power: pmic: stpmu1: Add regulator bindings   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 3/4] ARM: dts: stm32mp157c-ed1: Add regulator node   Tom Rini
• [U-Boot] [U-Boot, RESEND, v1, 4/4] configs: stm32mp15_basic: Set regulator relative flags   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] regmap: add regmap_update_bits() helper   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] test: regmap: add read/modify/write test   Tom Rini
• [U-Boot] mach-snapdragon: Fix UART clock flow   Tom Rini
• [U-Boot] [PATCH] lib/Kconfig: Mark OF_LIBFDT_OVERLAY as depending on OF_LIBFDT   Tom Rini
• [U-Boot] [PATCH] FIT: Make fit_conf_print() be a static function   Tom Rini
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Tom Rini
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [U-Boot, v2] arm: ti: boot: Extract PARTS_DEFAULT to boot.h   Tom Rini
• [U-Boot] ARM: dts: sti: Add stih410-b2260-u-boot.dtsi   Tom Rini
• [U-Boot] [U-Boot, v3] db410c: set clk node to be probed before relocation   Tom Rini
• [U-Boot] [U-Boot,v2,1/2] ihs_mdio: Encapsulate register access   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] ihs_mdio: Make DM-compatible   Tom Rini
• [U-Boot] [U-Boot,v2] clk: Add ICS8N3QV01 driver   Tom Rini
• [U-Boot] [U-Boot, v2] gdsys: drivers: Add gdsys_rxaui_ctrl driver   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] pci: Don't use pci_indirect when DM is active   Tom Rini
• [U-Boot] [U-Boot,v2] cmd: add ADC cli commands   Tom Rini
• [U-Boot] arm: bitops: fix find_next_zero_bit() for case size < 32   Tom Rini
• [U-Boot] image: fit: Show signatures and hashes for configurations   Tom Rini
• [U-Boot] bootm.c: Correct the flush_len used in bootm_load_os()   Tom Rini
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   Tom Rini
• [U-Boot] GCC 7.x vs. C++ comments   Tom Rini
• [U-Boot] [PATCHv2 2/3] buildman: support newer gcc versions from kernel.org   Tom Rini
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   Tom Rini
• [U-Boot] GCC 7.x vs. C++ comments   Tom Rini
• [U-Boot] [PATCH] fs: ext4: fix crash on ext4ls   Tom Rini
• [U-Boot] GCC 7.x vs. C++ comments   Tom Rini
• [U-Boot] GCC 7.x vs. C++ comments   Tom Rini
• [U-Boot] GCC 7.x vs. C++ comments   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: always check parameters in efi_cout_query_mode()   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: always check parameters in efi_cout_query_mode()   Tom Rini
• [U-Boot] [PATCHv2 2/3] buildman: support newer gcc versions from kernel.org   Tom Rini
• [U-Boot] [PATCHv3 1/3] at91: Minor tweaks to SPL logic for space savings on smartweb   Tom Rini
• [U-Boot] [PATCHv3 2/3] buildman: support newer gcc versions from kernel.org   Tom Rini
• [U-Boot] [PATCHv3 3/3] .travis.yml: Further optimizations   Tom Rini
• [U-Boot] [PATCH v2 1/2] fs: ext4: fix crash on ext4ls   Tom Rini
• [U-Boot] [PATCH v2 2/2] test: fs: fs-test: Modified test 1 to do a ls to a nonexistent dir   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCHv2 2/3] buildman: support newer gcc versions from kernel.org   Tom Rini
• [U-Boot] Pull request: u-boot-ubi/master   Tom Rini
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   Tom Rini
• [U-Boot] [PATCH v3 0/9] Fixup set_bit/clear_bit definition and usage   Tom Rini
• [U-Boot] Tegra U-Boot Patches   Tom Rini
• [U-Boot] [U-Boot, v5, 1/7] bootcount: spl: Enable bootcount support in SPL   Tom Rini
• [U-Boot] [U-Boot, v5, 2/7] bootcount: Add include guards into bootcount.h file   Tom Rini
• [U-Boot] [U-Boot, v5, 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Tom Rini
• [U-Boot] [U-Boot, v5, 4/7] bootcount: Rewrite autoboot to use wrapper functions from bootcount.h   Tom Rini
• [U-Boot] [U-Boot, v5, 5/7] bootcount: spl: Extend SPL to support bootcount incrementation   Tom Rini
• [U-Boot] [U-Boot, v5, 6/7] bootcount: display5: spl: Extend DISPLAY5 board SPL to support bootcount checking   Tom Rini
• [U-Boot] [U-Boot, v5, 7/7] bootcount: display5: config: Enable boot count feature in the display5 board   Tom Rini
• [U-Boot] [U-Boot,1/2] p1022ds: Change Timur's email address   Tom Rini
• [U-Boot] [U-Boot, 2/2] board/freescale: Remove invalid fsl email addresses   Tom Rini
• [U-Boot] Fix Ymodem build when DEBUG and CONFIG_USE_TINY_PRINTF are selected   Tom Rini
• [U-Boot] bootm: fix 'memory-fixup' for vxWorks boot   Tom Rini
• [U-Boot] [U-Boot, 1/1] tools/file2include: create Linux style SPDX header   Tom Rini
• [U-Boot] [U-Boot, 1/1] xyz-modem: va_start() must be matched by va_end()   Tom Rini
• [U-Boot] [U-Boot, v2, 1/1] include: update log2 header from the Linux kernel   Tom Rini
• [U-Boot] [U-Boot, 1/1] tools/file2include: avoid incorrect comments   Tom Rini
• [U-Boot] SPDX: Convert a few files that were missed before   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] Beaglebone Black U-boot won't buid - THUMB instruction issue   Tom Rini
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   Tom Rini
• [U-Boot] [GIT PULL] Xilinx changes for v2018.07   Tom Rini
• [U-Boot] [PATCH 1/2] mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.   Tom Rini
• [U-Boot] [PATCH 2/2] mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PATCH v2] ext4fs: Add ext4 extent tree cache   Tom Rini
• [U-Boot] mmc: Improve tinification   Tom Rini
• [U-Boot] NDS32 toolchain?   Tom Rini
• [U-Boot] [PATCH] tools: adopt --std=gnu99 where C99 comments are needed   Tom Rini
• [U-Boot] [U-Boot,3/3] mmc: support writing sparse images   Tom Rini
• [U-Boot] [GIT PULL] Xilinx changes for v2018.07   Tom Rini
• [U-Boot] [PATCH v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Tom Rini
• [U-Boot] [PATCH v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   Tom Rini
• [U-Boot] [PATCH v3 03/25] tpm: disociate TPMv1.x specific and generic code   Tom Rini
• [U-Boot] [PATCH] tools: adopt --std=gnu99 where C99 comments are needed   Tom Rini
• [U-Boot] [U-Boot,3/3] mmc: support writing sparse images   Tom Rini
• [U-Boot] [PATCH v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Tom Rini
• [U-Boot] [PATCH] block: Have BLOCK_CACHE default to y in some cases   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Tom Rini
• [U-Boot] [U-Boot,1/2] net: mvgbe: remove CONFIG_DOVE   Tom Rini
• [U-Boot] [U-Boot,2/2] net: add Kconfig for MVGBE   Tom Rini
• [U-Boot] mmc: sdhci: Check that ops are defined   Tom Rini
• [U-Boot] treewide: Move CONFIG_PHY_MARVELL to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] net: Add Kconfig option for BOOTP_NTPSERVER   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] net: bootp: Fix compile error processing ntpserver option   Tom Rini
• [U-Boot] Please pull u-boot-video/master   Tom Rini
• [U-Boot] [PATCH] image: fit: Allow booting Aarch64 from arm   Tom Rini
• [U-Boot] ARM: mvebu: a38x: Add missing SPDX license identfier   Tom Rini
• [U-Boot] [PATCH v4 01/32] tpm: remove redundant blank line   Tom Rini
• [U-Boot] [PATCH v4 02/32] tpm: remove extra spaces between a function and its opening bracket   Tom Rini
• [U-Boot] [PATCH v4 03/32] tpm: substitute deprecated uint<x>_t types with their u<x> equivalent   Tom Rini
• [U-Boot] [PATCH v4 04/32] tpm: align arguments with open parenthesis   Tom Rini
• [U-Boot] [PATCH v4 05/32] tpm: use the BIT() macro where applicable   Tom Rini
• [U-Boot] [PATCH v4 06/32] tpm: fix spelling   Tom Rini
• [U-Boot] [PATCH v4 07/32] tpm: add extra blank lines between declarations and code   Tom Rini
• [U-Boot] [PATCH v4 08/32] tpm: add Revision ID field in the chip structure   Tom Rini
• [U-Boot] [PATCH v4 09/32] tpm: prepare introduction of TPMv2.x support in Kconfig   Tom Rini
• [U-Boot] [PATCH v4 10/32] tpm: disociate TPMv1.x specific and generic code   Tom Rini
• [U-Boot] [PATCH v4 11/32] tpm: add missing parameter in private data structure description   Tom Rini
• [U-Boot] [PATCH v4 12/32] tpm: prepare support for TPMv2.x commands   Tom Rini
• [U-Boot] [PATCH v4 13/32] tpm: add macros to enhance TPM commands readability   Tom Rini
• [U-Boot] [PATCH v4 14/32] tpm: add possible traces to analyze buffers returned by the TPM   Tom Rini
• [U-Boot] [PATCH v4 15/32] tpm: report driver error code to upper layer   Tom Rini
• [U-Boot] [PATCH v4 16/32] tpm: add TPM2_Startup command support   Tom Rini
• [U-Boot] [PATCH v4 17/32] tpm: add TPM2_SelfTest command support   Tom Rini
• [U-Boot] [PATCH v4 18/32] tpm: add TPM2_Clear command support   Tom Rini
• [U-Boot] [PATCH v4 19/32] tpm: add TPM2_PCR_Extend command support   Tom Rini
• [U-Boot] [PATCH v4 20/32] tpm: add TPM2_PCR_Read command support   Tom Rini
• [U-Boot] [PATCH v4 21/32] tpm: add TPM2_GetCapability command support   Tom Rini
• [U-Boot] [PATCH v4 22/32] tpm: add dictionary attack mitigation commands support   Tom Rini
• [U-Boot] [PATCH v4 23/32] tpm: add TPM2_HierarchyChangeAuth command support   Tom Rini
• [U-Boot] [PATCH v4 24/32] tpm: add PCR authentication commands support   Tom Rini
• [U-Boot] [PATCH v4 25/32] tpm: add support for TPMv2.x SPI modules   Tom Rini
• [U-Boot] [PATCH v4 26/32] tpm: add the possibility to reset the chip with a gpio   Tom Rini
• [U-Boot] [PATCH v4 27/32] doc: device-tree-bindings: add TIS TPMv2.0 SPI module info   Tom Rini
• [U-Boot] [PATCH v4 28/32] test/py: add TPMv2.x test suite   Tom Rini
• [U-Boot] [PATCH v4 29/32] tpm: add a Sandbox TPMv2.x driver   Tom Rini
• [U-Boot] [PATCH v4 30/32] doc: device-tree-bindings: add Sandbox TPMv2.0 module info   Tom Rini
• [U-Boot] [PATCH v4 31/32] sandbox: dts: add Sandbox TPMv2.x node   Tom Rini
• [U-Boot] [PATCH v4 32/32] configs: add TPMv2.x support in Sandbox   Tom Rini
• [U-Boot] [PATCH v4 00/32] Introduce TPMv2.0 support   Tom Rini
• [U-Boot] [PATCH v4 26/32] tpm: add the possibility to reset the chip with a gpio   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] common: Add support for Android DT image   Tom Rini
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Tom Rini
• [U-Boot] [PATCH 1/3] doc: Add new doc for file system firmware loader driver model   Tom Rini
• [U-Boot] [U-Boot, v3, 1/9] x86: Define PLATFORM__SET_BIT for generic_set_bit()   Tom Rini
• [U-Boot] [U-Boot, v3, 2/9] riscv: Define PLATFORM__SET_BIT for generic_set_bit()   Tom Rini
• [U-Boot] [U-Boot, v3, 3/9] riscv: Define PLATFORM__CLEAR_BIT for generic_clear_bit()   Tom Rini
• [U-Boot] [U-Boot, v3, 4/9] nios2: Define PLATFORM__SET_BIT for generic_set_bit()   Tom Rini
• [U-Boot] [U-Boot, v3, 5/9] nios2: Define PLATFORM__CLEAR_BIT for generic_clear_bit()   Tom Rini
• [U-Boot] [U-Boot, v3, 6/9] nds32: Define PLATFORM__SET_BIT for generic_set_bit()   Tom Rini
• [U-Boot] [U-Boot, v3, 7/9] nds32: Define PLATFORM__CLEAR_BIT for generic_clear_bit()   Tom Rini
• [U-Boot] [U-Boot, v3, 8/9] usb: f_mass_storage: Fix set_bit and clear_bit usage   Tom Rini
• [U-Boot] [U-Boot, v3, 9/9] usb: composite convert __set_bit to generic_set_bit   Tom Rini
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PATCH] ARM: re-enable MVGBE for edminiv2   Tom Rini
• [U-Boot] [PATCH] net: MVGBE don't automatically select PHYLIB   Tom Rini
• [U-Boot] [PATCH 1/3] doc: Add new doc for file system firmware loader driver model   Tom Rini
• [U-Boot] [PATCH] net: MVGBE don't automatically select PHYLIB   Tom Rini
• [U-Boot] [PATCH v2] net: MVGBE don't automatically select PHYLIB   Tom Rini
• [U-Boot] RFC: Alternative boot_jump_linux() function   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master (v2)   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Tom Rini
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Tom Rini
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCHv2] block: Have BLOCK_CACHE default to y in some cases   Tom Rini
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Tom Rini
• [U-Boot] [U-Boot, PATCHv3, 1/3] at91: Minor tweaks to SPL logic for space savings on smartweb   Tom Rini
• [U-Boot] [U-Boot, PATCHv3, 2/3] buildman: support newer gcc versions from kernel.org   Tom Rini
• [U-Boot] [U-Boot, PATCHv3, 3/3] .travis.yml: Further optimizations   Tom Rini
• [U-Boot] [U-Boot, v3, 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Tom Rini
• [U-Boot] arm: armv7m: Clean up some thumb / compiler flag options   Tom Rini
• [U-Boot] Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig   Tom Rini
• [U-Boot] Licenses/README: Update some style and add explicit license to the document   Tom Rini
• [U-Boot] FIT: Make fit_conf_print() be a static function   Tom Rini
• [U-Boot] [U-Boot, 1/3] configs: at91: sama5_common: Adjust CONFIG_ENV_OFFSET to match block alignment   Tom Rini
• [U-Boot] [U-Boot, 2/3] configs: at91: Adjust CONFIG_ENV_OFFSET to match sama5 address   Tom Rini
• [U-Boot] [U-Boot, 3/3] configs: at91sam9x5ek: updated mtdparts variable in bootargs   Tom Rini
• [U-Boot] clk: at91: clk-h32mx: replace dm_warn with dev_dbg   Tom Rini
• [U-Boot] configs: sama5d2_xplained: enable ext4 command support   Tom Rini
• [U-Boot] [U-Boot,1/3] net: Drop CONFIG_TSI108_ETH   Tom Rini
• [U-Boot] [U-Boot,2/3] i2c: Drop CONFIG_TSI108_I2C   Tom Rini
• [U-Boot] [U-Boot,3/3] i2c: Drop CONFIG_SH_SH7734_I2C   Tom Rini
• [U-Boot] [U-Boot,v2,1/2] fs: ext4: fix crash on ext4ls   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] test: fs: fs-test: Modified test 1 to do a ls to a nonexistent dir   Tom Rini
• [U-Boot] [U-Boot,v2,1/1] doc: expand README.commands   Tom Rini
• [U-Boot] [U-Boot, 1/2] configs: sama5d2_xplained: set default FAT env location to SD-Card   Tom Rini
• [U-Boot] [U-Boot, 2/2] configs: sama5d2_xplained: fix bootcmd/args for spi+emmc demo   Tom Rini
• [U-Boot] bootcount: Add bootcount command   Tom Rini
• [U-Boot] spl: fit: Add support for loading FPGA bitstream   Tom Rini
• [U-Boot] [U-Boot,1/3] fit: Fix CONFIG_FIT_SPL_PRINT   Tom Rini
• [U-Boot] [U-Boot, 2/3] fit: Add empty fit_print_contents() and fit_image_print()   Tom Rini
• [U-Boot] [U-Boot,3/3] fit: Add standalone image type handling   Tom Rini
• [U-Boot] spl: Add full fitImage support   Tom Rini
• [U-Boot] twister: Let SPL load U-Boot from MMC   Tom Rini
• [U-Boot] [U-Boot, v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Tom Rini
• [U-Boot] arm64: timer: Create timer_get_bootus for bootstage support   Tom Rini
• [U-Boot] [U-Boot, v3, 1/2] arm: print instructions pointed to by pc   Tom Rini
• [U-Boot] [U-Boot,v3,2/2] scripts: add decodecode from Linux   Tom Rini
• [U-Boot] [U-Boot, V2] pylibfdt: Add missing CC and LD to Makefile   Tom Rini
• [U-Boot] [uboot-snps-arc] [PATCH 0/3] Improvements for ARC UART   Tom Rini
• [U-Boot] [PULL] rpi patch queue 2018-05-24   Tom Rini
• [U-Boot] Please pull ARC changes   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] common: Add support for Android DT image   Tom Rini
• [U-Boot] [U-Boot, v3, 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Tom Rini
• [U-Boot] [PATCH 1/2] fit: allow fit to call hardware accelerated hash   Tom Rini
• [U-Boot] U-Boot thumb interlink patches   Tom Rini
• [U-Boot] RFC: Alternative boot_jump_linux() function   Tom Rini
• [U-Boot] [PATCH] sandbox_flattree: Switch to TPMv2 support   Tom Rini
• [U-Boot] [PATCH] tests: Make test_log.py tests depend on cmd_log not log   Tom Rini
• [U-Boot] U-Boot thumb interlink patches   Tom Rini
• [U-Boot] RFC: Alternative boot_jump_linux() function   Tom Rini
• [U-Boot] [U-Boot,v4,01/32] tpm: remove redundant blank line   Tom Rini
• [U-Boot] [U-Boot, v4, 02/32] tpm: remove extra spaces between a function and its opening bracket   Tom Rini
• [U-Boot] [U-Boot, v4, 03/32] tpm: substitute deprecated uint<x>_t types with their u<x> equivalent   Tom Rini
• [U-Boot] [U-Boot, v4, 04/32] tpm: align arguments with open parenthesis   Tom Rini
• [U-Boot] [U-Boot, v4, 05/32] tpm: use the BIT() macro where applicable   Tom Rini
• [U-Boot] [U-Boot,v4,06/32] tpm: fix spelling   Tom Rini
• [U-Boot] [U-Boot, v4, 07/32] tpm: add extra blank lines between declarations and code   Tom Rini
• [U-Boot] [U-Boot, v4, 08/32] tpm: add Revision ID field in the chip structure   Tom Rini
• [U-Boot] [U-Boot, v4, 09/32] tpm: prepare introduction of TPMv2.x support in Kconfig   Tom Rini
• [U-Boot] [U-Boot, v4, 10/32] tpm: disociate TPMv1.x specific and generic code   Tom Rini
• [U-Boot] [U-Boot, v4, 11/32] tpm: add missing parameter in private data structure description   Tom Rini
• [U-Boot] [U-Boot, v4, 12/32] tpm: prepare support for TPMv2.x commands   Tom Rini
• [U-Boot] [U-Boot, v4, 13/32] tpm: add macros to enhance TPM commands readability   Tom Rini
• [U-Boot] [U-Boot, v4, 14/32] tpm: add possible traces to analyze buffers returned by the TPM   Tom Rini
• [U-Boot] [U-Boot, v4, 15/32] tpm: report driver error code to upper layer   Tom Rini
• [U-Boot] [U-Boot, v4, 16/32] tpm: add TPM2_Startup command support   Tom Rini
• [U-Boot] [U-Boot, v4, 17/32] tpm: add TPM2_SelfTest command support   Tom Rini
• [U-Boot] [U-Boot,v4,18/32] tpm: add TPM2_Clear command support   Tom Rini
• [U-Boot] [U-Boot, v4, 19/32] tpm: add TPM2_PCR_Extend command support   Tom Rini
• [U-Boot] [U-Boot, v4, 20/32] tpm: add TPM2_PCR_Read command support   Tom Rini
• [U-Boot] [U-Boot, v4, 21/32] tpm: add TPM2_GetCapability command support   Tom Rini
• [U-Boot] [U-Boot, v4, 22/32] tpm: add dictionary attack mitigation commands support   Tom Rini
• [U-Boot] [U-Boot, v4, 23/32] tpm: add TPM2_HierarchyChangeAuth command support   Tom Rini
• [U-Boot] [U-Boot, v4, 24/32] tpm: add PCR authentication commands support   Tom Rini
• [U-Boot] [U-Boot, v4, 25/32] tpm: add support for TPMv2.x SPI modules   Tom Rini
• [U-Boot] [U-Boot, v4, 27/32] doc: device-tree-bindings: add TIS TPMv2.0 SPI module info   Tom Rini
• [U-Boot] [U-Boot,v4,28/32] test/py: add TPMv2.x test suite   Tom Rini
• [U-Boot] [U-Boot,v4,29/32] tpm: add a Sandbox TPMv2.x driver   Tom Rini
• [U-Boot] [U-Boot, v4, 30/32] doc: device-tree-bindings: add Sandbox TPMv2.0 module info   Tom Rini
• [U-Boot] [U-Boot, v4, 31/32] sandbox: dts: add Sandbox TPMv2.x node   Tom Rini
• [U-Boot] [U-Boot, v4, 32/32] configs: add TPMv2.x support in Sandbox   Tom Rini
• [U-Boot] [U-Boot, v5] tpm2: tis_spi: add the possibility to reset the chip with a gpio   Tom Rini
• [U-Boot] [RFC][DO NOT APPLY] binman: Switch to 'python-coverage'   Tom Rini
• [U-Boot] env: mmc: Fix misaligned buffer address when saving envvars to FAT   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] common: Add support for Android DT image   Tom Rini
• [U-Boot] [U-Boot, 1/3] PCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set   Tom Rini
• [U-Boot] [U-Boot, 2/3] ARM: qemu-arm: Bump RAM size in AArch64 MMU table   Tom Rini
• [U-Boot] [U-Boot, 3/3] doc: qemu-arm: Drop highmem=off references   Tom Rini
• [U-Boot] [U-Boot, 1/2] PCI: Add newlines to debug prints in pci_auto_common.c   Tom Rini
• [U-Boot] [U-Boot, 2/2] PCI: autoconfig: Don't allocate 64-bit addresses to 32-bit only resources   Tom Rini
• [U-Boot] PCI: Document pciauto_region_allocate()   Tom Rini
• [U-Boot] Remove CONFIG_MVGBE from config_whitelist.txt   Tom Rini
• [U-Boot] [U-Boot, v2, 1/7] db820c: set clk node to be probed before relocation   Tom Rini
• [U-Boot] [U-Boot, v2, 2/7] serial: serial_msm: fail probe if settings clocks fails   Tom Rini
• [U-Boot] [U-Boot, v2, 3/7] serial: serial_msm: initialize uart only before relocation   Tom Rini
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Tom Rini
• [U-Boot] [U-Boot, v2, 5/7] mach-snapdragon: Introduce pinctrl driver   Tom Rini
• [U-Boot] [U-Boot, v2, 6/7] db410: added pinctrl node and serial bindings   Tom Rini
• [U-Boot] [U-Boot, v2, 7/7] serial: serial_msm: added pinmux & config   Tom Rini
• [U-Boot] [U-Boot, v2] ram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at booting   Tom Rini
• [U-Boot] [U-Boot,v1,1/5] serial: stm32: Add debug uart support   Tom Rini
• [U-Boot] [U-Boot,v1,2/5] serial: stm32: Fix bits defines name   Tom Rini
• [U-Boot] [U-Boot,v1,3/5] dm: serial: Add setparity   Tom Rini
• [U-Boot] [U-Boot,v1,4/5] serial: stm32: Add setparity support   Tom Rini
• [U-Boot] [U-Boot, v1, 5/5] stm32mp1: Allow to activate CONFIG_DEBUG_UART   Tom Rini
• [U-Boot] [U-Boot, v1, 1/4] stm32mp1: remove the second TAMP_BOOT_CONTEXT update   Tom Rini
• [U-Boot] [U-Boot,v1,2/4] stm32mp1: add bsec driver   Tom Rini
• [U-Boot] [U-Boot,v1,3/4] stm32mp1: add FUSE command support   Tom Rini
• [U-Boot] [U-Boot, v1, 4/4] stm32mp1: use OTP to configure MAC address and serial number   Tom Rini
• [U-Boot] mmc: stm32_sdmmc2: Fix stm32_sdmmc2_start_cmd()   Tom Rini
• [U-Boot] malloc: Use malloc simple before malloc is fully initialized in memalign()   Tom Rini
• [U-Boot] [U-Boot, v3] add FIT data-position & data-offset property support   Tom Rini
• [U-Boot] [PATCH 00/12] binman: A few more features   Tom Rini
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Tom Rini
• [U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow   Tom Rini
• [U-Boot] Remove CONFIG_MVGBE from config_whitelist.txt   Tom Rini
• [U-Boot] [PATCH v2 1/2] drivers; add DM_NO_OF Kconfig option   Tom Rini
• [U-Boot] [U-Boot,v1,3/5] dm: serial: Add setparity   Tom Rini
• [U-Boot] Uboot send pull request   Tom Rini
• [U-Boot] Pull request: u-boot-ubi/master   Tom Rini
• [U-Boot] Please pull u-boot-marvell   Tom Rini
• [U-Boot] Import Android's dt_table.h for DT image format   Tom Rini
• [U-Boot] [U-Boot, v2] mach-snapdragon: increase size of malloc pool   Tom Rini
• [U-Boot] db820c: add dummy clock for uart node   Tom Rini
• [U-Boot] Uboot send pull request   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [U-Boot, v3, 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Tom Rini
• [U-Boot] [U-Boot,v3,1/6] kconfig: re-sync with Linux 4.17-rc4   Tom Rini
• [U-Boot] [U-Boot, v3, 2/6] board: eets: pdu001: Fix wrong default value in Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 3/6] scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9   Tom Rini
• [U-Boot] [U-Boot, v3, 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Tom Rini
• [U-Boot] [U-Boot, v3, 5/6] scripts/dtc: Re-sync with Linux 4.17-rc4   Tom Rini
• [U-Boot] [U-Boot, v3, 6/6] test: dm: Fix wrong aliases property names   Tom Rini
• [U-Boot] [U-Boot,1/1] logos: provide U-Boot logo   Tom Rini
• [U-Boot] gitignore: remove stale /LOG pattern   Tom Rini
• [U-Boot] tests: Make test_log.py tests depend on cmd_log not log   Tom Rini
• [U-Boot] [U-Boot,1/1] Remove snapshot.commit   Tom Rini
• [U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v4: Add Bananapi M2 Berry support   Maxime Ripard
• [U-Boot] [PATCH v3 1/2] pwm: sunxi: add support for PWM found on Allwinner A64   Maxime Ripard
• [U-Boot] [PATCH 1/2] sunxi-mmc: use new mode on A64   Maxime Ripard
• [U-Boot] [PATCH 2/2] mmc: sunxi: run calibration on A64   Maxime Ripard
• [U-Boot] [PATCH v3 2/2] sunxi: binman: Add U-Boot binary size check   Maxime Ripard
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Maxime Ripard
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Maxime Ripard
• [U-Boot] [PATCH v3 2/2] sunxi: binman: Add U-Boot binary size check   Maxime Ripard
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Maxime Ripard
• [U-Boot] [PATCH v2] board: sun50i: Add Amarula A64 Relic initial support   Maxime Ripard
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Maxime Ripard
• [U-Boot] [PATCH] Revert "sunxi: binman: Add U-Boot binary size check"   Maxime Ripard
• [U-Boot] [PATCH v2 2/2] mmc: sunxi: run calibration on A64   Maxime Ripard
• [U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode on A64   Maxime Ripard
• [U-Boot] [RFC PATCH 0/3] sunxi: extend SPL header to propagate DRAM size   Maxime Ripard
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   Maxime Ripard
• [U-Boot] [PATCH v6 7/7] sunxi: DT: A64: add Pine64-LTS support   Maxime Ripard
• [U-Boot] [PATCH] arm: dts: sunxi: enable Ethernet on NanoPi Neo Plus2   Maxime Ripard
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Maxime Ripard
• [U-Boot] [PATCH] sunxi: Enable fitImage support on OrangePi Zero   Maxime Ripard
• [U-Boot] [PATCH] sunxi: Enable fitImage support on OrangePi Zero   Maxime Ripard
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Maxime Ripard
• [U-Boot] [PATCH] sunxi: Enable fitImage support on OrangePi Zero   Maxime Ripard
• [U-Boot] [PATCH] sunxi: Enable fitImage support on OrangePi Zero   Maxime Ripard
• [U-Boot] [PATCH v2] sunxi: add support for Banana Pi M2 Zero board   Maxime Ripard
• [U-Boot] [PATCH v2] sunxi: add support for Banana Pi M2 Zero board   Maxime Ripard
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Maxime Ripard
• [U-Boot] [PATCH v3] board: sun50i: Add Amarula A64-Relic initial support   Maxime Ripard
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Maxime Ripard
• [U-Boot] [PATCH v3] board: sun50i: Add Amarula A64-Relic initial support   Maxime Ripard
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Maxime Ripard
• [U-Boot] [PATCH] arm: sunxi: Add support for Pengpod 1000 tablet   Maxime Ripard
• [U-Boot] [PATCH v3 1/2] sunxi-mmc: use new mode on A64   Maxime Ripard
• [U-Boot] [PATCH] add common.h include to stdio_dev.h   Peter Robinson
• [U-Boot] [PATCH] add common.h include to stdio_dev.h   Peter Robinson
• [U-Boot] [PATCH] stdio_dev.h: Drop the video section as it is unused   Peter Robinson
• [U-Boot] [PATCHv2 2/2] stdio_names: Ensure MAX_NAMES is defined before use, don't use 3 directly   Peter Robinson
• [U-Boot] [PATCH] tegra: nyan-big: Update CONFIG_SYS_TEXT to the default in README.chromium   Peter Robinson
• [U-Boot] [PATCH] mx6 common: remove dangling comment   Peter Robinson
• [U-Boot] [PATCH] mx7: remove empty ifndef statement   Peter Robinson
• [U-Boot] [PATCH] mx6: Select CONFIG_MP with MX6_SMP   Peter Robinson
• [U-Boot] [PATCH] mx6: remove duplicated BOUNCE_BUFFER defines   Peter Robinson
• [U-Boot] Support for the Raspberry Pi 3B+?   Peter Robinson
• [U-Boot] RFC: Alternative boot_jump_linux() function   Peter Robinson
• [U-Boot] [PATCH v6 0/7] sunxi: sync H3, H5, A64 DTs from mainline Linux   Peter Robinson
• [U-Boot] [PATCH v3 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Stefan Roese
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Stefan Roese
• [U-Boot] [PATCH 2/2] net: add Kconfig for MVGBE   Stefan Roese
• [U-Boot] [PATCH 2/2] spi: kirkwood: Full dm conversion   Stefan Roese
• [U-Boot] [PATCH 1/2] net: mvgbe: remove CONFIG_DOVE   Stefan Roese
• [U-Boot] [PATCH v5 3/7] bootcount: Add function wrappers to handle bootcount increment and error checking   Stefan Roese
• [U-Boot] [PATCH v2 0/6] ARM: mvebu: a38x: updates to ddr training code   Stefan Roese
• [U-Boot] [PATCH] phy: marvell: a3700: Fix compatible string for ehci   Stefan Roese
• [U-Boot] [PATCH v3 0/6] ARM: mvebu: a38x: updates to ddr training code   Stefan Roese
• [U-Boot] [PATCH v2 00/20] More support for Armada 37xx boards (for Turris Mox)   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Stefan Roese
• [U-Boot] [PATCH 09/12] ARM: kirkwood: Add device-tree for nsa310s   Stefan Roese
• [U-Boot] [PATCH 00/12] kirkwood: device tree support   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH] arm: kirkwood: openrd: Change environment location   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH] net: MVGBE don't automatically select PHYLIB   Stefan Roese
• [U-Boot] [PATCH] arm: kirkwood: openrd: Change environment location   Stefan Roese
• [U-Boot] [PATCH 1/4] phy: marvell: Support changing SERDES map in board file   Stefan Roese
• [U-Boot] [PATCH] board: turris_mox: Add fixed regulator support to defconfig   Stefan Roese
• [U-Boot] [PATCH] net: MVGBE don't automatically select PHYLIB   Stefan Roese
• [U-Boot] [PATCH] net: MVGBE don't automatically select PHYLIB   Stefan Roese
• [U-Boot] [PATCH v2] net: MVGBE don't automatically select PHYLIB   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master (v2)   Stefan Roese
• [U-Boot] [PATCH 1/3] mvebu: pinctrl: sync compatible string with Linux 4.17-rc4   Stefan Roese
• [U-Boot] [PATCH 2/3] mvebu: pinctrl: Add SD/eMMC PHY selector to the driver   Stefan Roese
• [U-Boot] [PATCH 3/3] dts: mvebu: a80x0: Enable SD/eMMC interfaces   Stefan Roese
• [U-Boot] [PATCH v2 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   Stefan Roese
• [U-Boot] [PATCH v2 2/4] ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds   Stefan Roese
• [U-Boot] [PATCH v2 3/4] ata: ahci_mvebu: add scsi support   Stefan Roese
• [U-Boot] [PATCH v2 4/4] arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU   Stefan Roese
• [U-Boot] [PATCH v3 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Stefan Roese
• [U-Boot] [PATCH] configs: remove empty #ifdef block from mv-common.h   Stefan Roese
• [U-Boot] [PATCH 1/2] configs: remove redundant comment sections   Stefan Roese
• [U-Boot] [PATCH 2/2] configs: remove CONFIG_SYS_MVFS   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Stefan Roese
• [U-Boot] [PATCH 2/2] ARM: add SBx81LIFKW board   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Stefan Roese
• [U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes   Stefan Roese
• [U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes   Stefan Roese
• [U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: switch clearfog to use device-tree i2c and gpio   Stefan Roese
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Stefan Roese
• [U-Boot] [PATCH 1/2] mvebu: neta: align DMA buffers   Stefan Roese
• [U-Boot] [PATCH 2/2] net: ping,arp: Fix cache alignment issues   Stefan Roese
• [U-Boot] [RFC] arm: mvebu: Add Helios4 Armada 38x initial support   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: enable sata support for clearfog   Stefan Roese
• [U-Boot] [PATCH 1/2] drivers/rtc: prepare mvrtc for DM conversion   Stefan Roese
• [U-Boot] [PATCH 2/2] drivers/rtc: convert mvrtc to DM   Stefan Roese
• [U-Boot] [PATCH] board: turris_mox: Add fixed regulator support to defconfig   Stefan Roese
• [U-Boot] [PATCH 0/6] ARM: kirkwood: dts conversion round 2   Stefan Roese
• [U-Boot] [PATCH v2 1/3] mvebu: pinctrl: sync compatible string with Linux 4.17-rc4   Stefan Roese
• [U-Boot] [PATCH v2 2/3] mvebu: pinctrl: Add SD/eMMC PHY selector to the driver   Stefan Roese
• [U-Boot] [PATCH v2 3/3] dts: mvebu: a80x0: Enable SD/eMMC interfaces   Stefan Roese
• [U-Boot] [PATCH v4 0/4] ahci mvebu driver updates   Stefan Roese
• [U-Boot] [PATCH] configs: remove empty #ifdef block from mv-common.h   Stefan Roese
• [U-Boot] [PATCH 1/2] configs: remove redundant comment sections   Stefan Roese
• [U-Boot] [PATCH 2/2] configs: remove CONFIG_SYS_MVFS   Stefan Roese
• [U-Boot] Please pull u-boot-marvell   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: switch clearfog to use device-tree i2c and gpio   Stefan Roese
• [U-Boot] [PATCH] mtd: ubi: Add missing newlines in ubi_init()   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Stefan Roese
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Stefan Roese
• [U-Boot] [PATCH 1/2] enable CONFIG_DISTRO_DEFAULTS for LS-CHLv2 board   Stefan Roese
• [U-Boot] [RFC PATCH 2/2] arm: kirkwood: lsxl: Add SPI driver model support   Stefan Roese
• [U-Boot] [PATCH v2 1/2] ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled   Stefan Roese
• [U-Boot] [PATCH] net: mvgbe: extract common code for SMI wait   Stefan Roese
• [U-Boot] Enabling i.mx6 high assurance boot appears to breaks u-boot verified-boot   Davis Roman
• [U-Boot] [PATCH 0/8] Initial integration of AVB2.0   Eugeniu Rosca
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   Eugeniu Rosca
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   Eugeniu Rosca
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   Eugeniu Rosca
• [U-Boot] [RFC PATCH 1/2] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [RFC PATCH 2/2] board: eets: pdu001: Fix wrong default value in Kconfig   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/6] board: eets: pdu001: Fix wrong default value in Kconfig   Eugeniu Rosca
• [U-Boot] [PATCH v2 3/6] scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9   Eugeniu Rosca
• [U-Boot] [PATCH v2 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Eugeniu Rosca
• [U-Boot] [PATCH v2 5/6] scripts/dtc: Re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v2 6/6] sandbox: dts: test: Fix wrong aliases property names   Eugeniu Rosca
• [U-Boot] [RFC PATCH 1/2] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v2 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Eugeniu Rosca
• [U-Boot] [PATCH v2 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Eugeniu Rosca
• [U-Boot] [PATCH v2 5/6] scripts/dtc: Re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH 0/8] Initial integration of AVB2.0   Eugeniu Rosca
• [U-Boot] [PATCH 0/8] Initial integration of AVB2.0   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v2 3/6] scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9   Eugeniu Rosca
• [U-Boot] [PATCH v3 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v3 2/6] board: eets: pdu001: Fix wrong default value in Kconfig   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/6] scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9   Eugeniu Rosca
• [U-Boot] [PATCH v3 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Eugeniu Rosca
• [U-Boot] [PATCH v3 5/6] scripts/dtc: Re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v3 6/6] test: dm: Fix wrong aliases property names   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v3 1/6] kconfig: re-sync with Linux 4.17-rc4   Eugeniu Rosca
• [U-Boot] [PATCH v3 2/6] board: eets: pdu001: Fix wrong default value in Kconfig   Eugeniu Rosca
• [U-Boot] [PATCH] dlmalloc: ensure gd is set for early free   Eugeniu Rosca
• [U-Boot] [PATCH] dlmalloc: ensure gd is set for early free   Eugeniu Rosca
• [U-Boot] [PATCH v3 6/6] test: dm: Fix wrong aliases property names   Eugeniu Rosca
• [U-Boot] [PATCH v3 6/6] test: dm: Fix wrong aliases property names   Eugeniu Rosca
• [U-Boot] [UNTESTED PATCH] ARM: orion5x: fix use of callee-saved registers in lowloevel_init   Mans Rullgard
• [U-Boot] [PATCH v3 2/2] sunxi: binman: Add U-Boot binary size check   Måns Rullgård
• [U-Boot] [PATCH v3 2/2] sunxi: binman: Add U-Boot binary size check   Måns Rullgård
• [U-Boot] [PATCH v3 2/2] sunxi: binman: Add U-Boot binary size check   Måns Rullgård
• [U-Boot] [PATCH 2/5] ARM: arm926ejs: fix lowlevel_init call   Måns Rullgård
• [U-Boot] [PATCH v3 2/2] sunxi: binman: Add U-Boot binary size check   Måns Rullgård
• [U-Boot] GCC 7.x vs. C++ comments   Måns Rullgård
• [U-Boot] Beaglebone Black U-boot won't buid - THUMB instruction issue   Måns Rullgård
• [U-Boot] U-Boot thumb interlink patches   Måns Rullgård
• [U-Boot] [PATCH] arm, imx6: add support for SD/MMC Manufacture Mode   Otavio Salvador
• [U-Boot] [PATCH] arm, imx6: fix NOR/OneNAND boot mode mix-up   Otavio Salvador
• [U-Boot] [PATCH] bootm: fix 'memory-fixup' for vxWorks boot   Hannes Schmelzer
• [U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver   Heiko Schocher
• [U-Boot] [PATCH 2/3] i2c: Drop CONFIG_TSI108_I2C   Heiko Schocher
• [U-Boot] [PATCH 3/3] i2c: Drop CONFIG_SH_SH7734_I2C   Heiko Schocher
• [U-Boot] [PATCH v1] ubifs: avoid assert failed in ubifs.c   Heiko Schocher
• [U-Boot] Pull request: u-boot-ubi/master   Heiko Schocher
• [U-Boot] [PATCH 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver   Heiko Schocher
• [U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager   Heiko Schocher
• [U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver   Heiko Schocher
• [U-Boot] [PATCH V2 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver   Heiko Schocher
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Heiko Schocher
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Heiko Schocher
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Heiko Schocher
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Heiko Schocher
• [U-Boot] [PATCH] ubi: fastmap: Implement produce_free_peb()   Heiko Schocher
• [U-Boot] [PATCH] ubi: fastmap: Implement produce_free_peb()   Heiko Schocher
• [U-Boot] Pull request: u-boot-ubi/master   Heiko Schocher
• [U-Boot] [PATCH 23/41] imx_lpi2c: Update lpi2c driver to support imx8   Heiko Schocher
• [U-Boot] [PATCH 24/41] imx: lpi2c: fix clock issue when NACK detected   Heiko Schocher
• [U-Boot] [PATCH 25/41] lpi2c: Fix bus stop problem in xfer   Heiko Schocher
• [U-Boot] [PATCH 26/41] lpi2c: Add bus busy error handling   Heiko Schocher
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Heiko Schocher
• [U-Boot] [PATCH] efi_loader: correctly apply relocations from the .reloc section   Heinrich Schuchardt
• [U-Boot] BUG: cannot boot with CONFIG_LOG   Heinrich Schuchardt
• [U-Boot] Logo for U-Boot   Heinrich Schuchardt
• [U-Boot] Logo for U-Boot   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] SPDX: Convert tags to Linux Kernel style   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] tools/file2include: create Linux style SPDX header   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] xyz-modem: va_start() must be matched by va_end()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] include: update log2 header from the Linux kernel   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] tools/file2include: avoid incorrect comments   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/3] efi_loader: allow unaligned memory access   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: fix off-by-one bug in efi_get_variable   Heinrich Schuchardt
• [U-Boot] [PATCH] rockchip: set SYS_NS16550_MEM32 for all SoCs   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] arm: print instructions pointed to by pc   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: always check parameters in efi_cout_query_mode()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: always check parameters in efi_cout_query_mode()   Heinrich Schuchardt
• [U-Boot] [PATCH v2] efi_loader: fix off-by-one bug in efi_get_variable   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] doc: expand README.commands   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] doc: expand README.commands   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] arm: print instructions pointed to by pc   Heinrich Schuchardt
• [U-Boot] [PATCH] video: sunxi: de2: Reserve the fb region in the EFI memory map   Heinrich Schuchardt
• [U-Boot] [PATCH 0/4] implement ReinstallProtocolInterface   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] efi_selftest: correct efi_selftest_manageprotocols   Heinrich Schuchardt
• [U-Boot] [PATCH 2/4] efi_loader: check interface when uninstalling protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 3/4] efi_loader: implement ReinstallProtocolInterface   Heinrich Schuchardt
• [U-Boot] [PATCH 4/4] efi_selftest: test ReinstallProtocolInterface   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: DocBook comments for boot services   Heinrich Schuchardt
• [U-Boot] [PATCH v3] efi_loader: fix off-by-one bug in efi_get_variable   Heinrich Schuchardt
• [U-Boot] [PATCH v4] efi_loader: fix off-by-one bug in efi_get_variable   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] README.uefi: update list of missing functionality   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: adjust definitions of variable services   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: adjust definitions of variable services   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_selftest: unit test for variable services   Heinrich Schuchardt
• [U-Boot] [PATCH v3 0/2] arm: print instructions pointed to by pc   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/2] arm: print instructions pointed to by pc   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/2] scripts: add decodecode from Linux   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: avoid using unitialized values as console size   Heinrich Schuchardt
• [U-Boot] [PATCH v4 01/16] efi: Init the 'rows' and 'cols' variables   Heinrich Schuchardt
• [U-Boot] [PATCH v4 02/16] efi: Update some comments related to smbios tables   Heinrich Schuchardt
• [U-Boot] [PATCH v4 11/16] efi: Add a comment about duplicated ELF constants   Heinrich Schuchardt
• [U-Boot] [PATCH v4 03/16] efi: sandbox: Adjust memory usage for sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH v4 00/16] efi: Enable basic sandbox support for EFI loader   Heinrich Schuchardt
• [U-Boot] [PATCH v4 03/16] efi: sandbox: Adjust memory usage for sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH v4 00/16] efi: Enable basic sandbox support for EFI loader   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/2] efi_loader: adjust definitions of variable services   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] efi_loader: adjust definitions of variable services   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/2] efi_selftest: unit test for variable services   Heinrich Schuchardt
• [U-Boot] [BUG] qemu-x86_64_defconfig fails with panic("TSC frequency is ZERO");   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: do not call efi_init_obj_list() twice   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] Makefile: clean should delete *.efi   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] Allow building EFI binaries on x86_64   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_selftest: allow building relocation code on x86_64   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: build CRT0 and RELOC on x86_64   Heinrich Schuchardt
• [U-Boot] [BUG] efi_loader: LUV test and SCT test fail on minnowboard   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] logos: provide U-Boot logo   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] logos: bitmap files should not be executable   Heinrich Schuchardt
• [U-Boot] [BUG] Cannot build qemu-x86_64_defconfig   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] Makefile: clean should delete *.so   Heinrich Schuchardt
• [U-Boot] [PATCH v4 03/16] efi: sandbox: Adjust memory usage for sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_selftest: check for buffer overflow in efi_get_variable   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: imply FAT, FAT_WRITE   Heinrich Schuchardt
• [U-Boot] [PATCH] x86: use EFI calling convention for efi_main on x86_64   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: avoid anonymous constants for AllocatePages   Heinrich Schuchardt
• [U-Boot] [RFC 0/3] efi_loader: allow writing to FAT   Heinrich Schuchardt
• [U-Boot] [RFC 1/3] fs: fat: cannot write to subdirectories   Heinrich Schuchardt
• [U-Boot] [RFC 2/3] efi_selftest: imply FAT, FAT_WRITE   Heinrich Schuchardt
• [U-Boot] [RFC 3/3] efi_selftest: test writing to file   Heinrich Schuchardt
• [U-Boot] [BUG] efi_loader: efi_add_memory_map() removes mapping even on failure   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: efi_mem_carve_out should return s64   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: create handles from normal memory   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/3] efi_loader: allow writing to FAT   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/3] fs: fat: cannot write to subdirectories   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/3] efi_selftest: imply FAT, FAT_WRITE   Heinrich Schuchardt
• [U-Boot] [PATCH v2 3/3] efi_selftest: test writing to file   Heinrich Schuchardt
• [U-Boot] Parallel make issue with helloworld.efi   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] Remove snapshot.commit   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: avoid make race condition   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: efi_allocate_pages is too restrictive   Heinrich Schuchardt
• [U-Boot] [RESEND][PATCH] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [RESEND][PATCH] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [RESEND][PATCH] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH v2 2/2] test/py: add test for whitelist of variables while importing environment   Quentin Schulz
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH v2 2/2] test/py: add test for whitelist of variables while importing environment   Quentin Schulz
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH v3 1/2] cmd: nvedit: env import can now import only variables passed as parameters   Quentin Schulz
• [U-Boot] [PATCH v3 2/2] test/py: add test for whitelist of variables while importing environment   Quentin Schulz
• [U-Boot] [PATCH v3 1/2] cmd: nvedit: env import can now import only variables passed as parameters   Quentin Schulz
• [U-Boot] [PATCH v3] dm: core: add functions to get memory-mapped I/O addresses   Daniel Schwierzeck
• [U-Boot] [PATCH v2 00/17] bmips: convert to use live-dt   Daniel Schwierzeck
• [U-Boot] [PATCHv2 2/3] buildman: support newer gcc versions from kernel.org   Daniel Schwierzeck
• [U-Boot] [PATCH 0/5] Add DMA driver for DMA330 controller   See, Chin Liang
• [U-Boot] [PATCH] ARM: socfpga: Assure correct ACTLR configuration   See, Chin Liang
• [U-Boot] [PATCH] ARM: socfpga: Make DRAM node available in SPL   See, Chin Liang
• [U-Boot] [PATCH] ARM: socfpga: Pull DRAM size from DT   See, Chin Liang
• [U-Boot] [PATCH] ddr: altera: Drop custom dram_bank_mmu_setup() on Arria10   See, Chin Liang
• [U-Boot] [PATCH] disk: efi: Correct backing up the MBR boot code   Andy Shevchenko
• [U-Boot] [PATCH v1] x86: acpi: Adopt new version of iASL compiler   Andy Shevchenko
• [U-Boot] [PATCH] disk: efi: Correct backing up the MBR boot code   Andy Shevchenko
• [U-Boot] [PATCH v1] x86: acpi: Adopt new version of iASL compiler   Andy Shevchenko
• [U-Boot] [PATCH] x86: enable cpu-specific functions for x86_64 target   Andy Shevchenko
• [U-Boot] [PATCH v2] x86: use EFI calling convention for efi_main on x86_64   Andy Shevchenko
• [U-Boot] [PATCH v3] x86: use EFI calling convention for efi_main on x86_64   Andy Shevchenko
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Baruch Siach
• [U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes   Baruch Siach
• [U-Boot] [PATCH 1/2] mvebu: neta: align DMA buffers   Baruch Siach
• [U-Boot] [PATCH 2/2] net: ping,arp: Fix cache alignment issues   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: enable sata support for clearfog   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: switch clearfog to use device-tree i2c and gpio   Baruch Siach
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Baruch Siach
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Baruch Siach
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Baruch Siach
• [U-Boot] [PATCH 2/2] mvebu: turris_omnia: add note about i2c slave disable   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: switch clearfog to use device-tree i2c and gpio   Baruch Siach
• [U-Boot] [PATCH 1/2] i2c: mvtwsi: disable i2c slave on Armada 38x   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: move i2c slave disable to generic SPL code   Baruch Siach
• [U-Boot] [PATCH v2 1/2] mvebu: neta: align DMA buffers   Baruch Siach
• [U-Boot] [PATCH v2 2/2] net: ping,arp: Fix cache alignment issues   Baruch Siach
• [U-Boot] [PATCH v3 2/2] sunxi: binman: Add U-Boot binary size check   Siarhei Siamashka
• [U-Boot] [RFC PATCH 1/3] sunxi: Extend SPL header versioning   Siarhei Siamashka
• [U-Boot] [PATCH] arm: Add support for Trenz TE0820 (zynqmp)   Michal Simek
• [U-Boot] [PATCH] arm: Add support for Trenz TE0820 (zynqmp)   Michal Simek
• [U-Boot] [PATCH v2 1/1] arm: Add support for Trenz TE0820 on Sundance EMC2-DP-V2   Michal Simek
• [U-Boot] [PATCH] mmc: Changed the datatype of the variable to handle 64-bit arch   Michal Simek
• [U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Add initial support for Avnet MiniZed   Michal Simek
• [U-Boot] [PATCH v2] arm: zynq: Add initial support for Avnet MiniZed   Michal Simek
• [U-Boot] [PATCH v2] timer: Add Cadence TTC timer counter support   Michal Simek
• [U-Boot] [PATCH v3] arm64: zynqmp: Setup MMU map for DDR at run time   Michal Simek
• [U-Boot] [PATCH v4] zynqmp: Add generic target   Michal Simek
• [U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP   Michal Simek
• [U-Boot] [PATCH] mmc: Changed the datatype of the variable to handle 64-bit arch   Michal Simek
• [U-Boot] [GIT PULL] Xilinx changes for v2018.07   Michal Simek
• [U-Boot] [PATCH] mmc: sdhci: Check that ops are defined   Michal Simek
• [U-Boot] [GIT PULL] Xilinx changes for v2018.07   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Get rid of emulatio platforms   Michal Simek
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Michal Simek
• [U-Boot] [PATCH] image: fit: Allow booting Aarch64 from arm   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Add initial support for Avnet MiniZed   Michal Simek
• [U-Boot] [PATCH] arm64: timer: Create timer_get_bootus for bootstage support   Michal Simek
• [U-Boot] [PATCH] drivers: usb: dwc3: remove devm_zalloc from linux_compact   Michal Simek
• [U-Boot] [PATCH 0/6] Convert Xilinx ZynqMP to DM_USB with generic DWC3 glue logic driver   Michal Simek
• [U-Boot] [PATCH 1/6] usb: dwc3: Add dwc3_init/remove with DM_USB   Michal Simek
• [U-Boot] [PATCH 2/6] usb: common: add support to get maximum speed from dt   Michal Simek
• [U-Boot] [PATCH 3/6] usb: dwc3: Add generic DWC3 glue logic driver   Michal Simek
• [U-Boot] [PATCH 4/6] usb: xhci: zynqmp: Add support for DM_USB   Michal Simek
• [U-Boot] [PATCH 5/6] arm64: zynqmp: Use DWC3 generic driver and DM_USB   Michal Simek
• [U-Boot] [PATCH 6/6] usb: xhci: zynqmp: Remove support for !DM_USB   Michal Simek
• [U-Boot] [PATCH] usb: xhci: zynqmp: Fix header location   Michal Simek
• [U-Boot] Which carrier card is targeted by the zynq picozed implementation?   Michal Simek
• [U-Boot] [PATCH 3/6] usb: dwc3: Add generic DWC3 glue logic driver   Michal Simek
• [U-Boot] [PATCH 1/6] usb: dwc3: Add dwc3_init/remove with DM_USB   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Show reset reason   Michal Simek
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Show reset reason   Michal Simek
• [U-Boot] [PATCH v2] arm64: zynqmp: Show reset reason   Michal Simek
• [U-Boot] [PATCH v1] arm64: zynqmp: Setup the first boot_target at run time   Michal Simek
• [U-Boot] [PATCH 0/4] Use live-tree functions in some xilinx drivers   Michal Simek
• [U-Boot] [PATCH 1/4] serial: zynq: Use live-tree functions   Michal Simek
• [U-Boot] [PATCH 2/4] mmc: zynq: Use live-tree functions   Michal Simek
• [U-Boot] [PATCH 3/4] watchdog: cadence: Use live-tree functions   Michal Simek
• [U-Boot] [PATCH 4/4] timer: cadence: Use live-tree functions   Michal Simek
• [U-Boot] [PATCH v1] arm64: zynqmp: Setup the first boot_target at run time   Michal Simek
• [U-Boot] [PATCH v2] arm64: zynqmp: Get rid of emulation platforms   Michal Simek
• [U-Boot] [PATCH v2] drivers: usb: dwc3: remove devm_zalloc from linux_compact   Michal Simek
• [U-Boot] [PATCH v2 0/6] Convert Xilinx ZynqMP to DM_USB with generic DWC3 glue logic driver   Michal Simek
• [U-Boot] [PATCH v2 1/6] usb: dwc3: Add dwc3_init/remove with DM_USB   Michal Simek
• [U-Boot] [PATCH v2 2/6] usb: common: add support to get maximum speed from dt   Michal Simek
• [U-Boot] [PATCH v2 3/6] usb: dwc3: Add generic DWC3 glue logic driver   Michal Simek
• [U-Boot] [PATCH v2 4/6] usb: xhci: zynqmp: Add support for DM_USB   Michal Simek
• [U-Boot] [PATCH v2 5/6] arm64: zynqmp: Use DWC3 generic driver and DM_USB   Michal Simek
• [U-Boot] [PATCH v2 6/6] usb: xhci: zynqmp: Remove support for !DM_USB   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Remove empty configuration file   Michal Simek
• [U-Boot] [PATCH v2 3/6] usb: dwc3: Add generic DWC3 glue logic driver   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Remove CMD_UNZIP for mini configuration   Michal Simek
• [U-Boot] [PATCH v3] arm: zynq: Add initial support for Avnet MiniZed   Michal Simek
• [U-Boot] [PATCH 3/4] scsi: ceva: add ls1012a soc support   Michal Simek
• [U-Boot] [PATCH v1 0/7] Improvements for the dwc3_generic driver   Michal Simek
• [U-Boot] [PATCH v1 1/7] usb: gadget: Do not call board_usb_xxx() directly in USB gadget drivers   Michal Simek
• [U-Boot] [PATCH v1 2/7] usb: introduce a separate config option for DM USB device   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Add support for Bitmain Antminer S9 control board   Michal Simek
• [U-Boot] [PATCH 3/3] serial: Migrate CONFIG_ARM_DCC to Kconfig   Michal Simek
• [U-Boot] [PATCH v1 0/7] Improvements for the dwc3_generic driver   Michal Simek
• [U-Boot] [PATCH 1/2] mmc: sdhci: Update sdhci_send_command() to handle HS200   Michal Simek
• [U-Boot] [PATCH 2/2] mmc: zynqmp: Add HS200 modes support for ZynqMP   Michal Simek
• [U-Boot] [PATCH] zynq: Add Zynq MiniZed board support   Michal Simek
• [U-Boot] [PATCH v1 0/7] Improvements for the dwc3_generic driver   Michal Simek
• [U-Boot] [PATCH 1/3] arm64: zynqmp: Add ina226 to zcu104 revC   Michal Simek
• [U-Boot] [PATCH 2/3] arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104   Michal Simek
• [U-Boot] [PATCH 3/3] arm64: zynqmp: Remove broken-cd from zcu100-revC   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Disable WP on zcu111   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Add TTC clocks   Michal Simek
• [U-Boot] [PATCH 1/3] cmd: fpga: Reorder the arguments parsing code   Michal Simek
• [U-Boot] [PATCH 2/3] cmd: fpga: Add support to load secure bitstreams   Michal Simek
• [U-Boot] [PATCH 2/3] cmd: fpga: Add support to load secure bitstreams   Michal Simek
• [U-Boot] [PATCH] xilinx: zynq: Add support to secure images   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: accept an absolute path for PMUFW_INIT_FILE   Michal Simek
• [U-Boot] [PATCH] arm: socfpga: correctly reserve SRAM for boot counter   Goldschmidt Simon
• [U-Boot] [PATCH v2 06/10] timer: Add MPC83xx timer driver   Mario Six
• [U-Boot] [PATCH v2] reset: Add generic GPIO reset driver   Mario Six
• [U-Boot] [PATCH v2 1/4] core: Add functions to set properties in live-tree   Mario Six
• [U-Boot] [PATCH v2 2/5] regmap: Support reading from specific range   Mario Six
• [U-Boot] [PATCH v2 3/4] core: Add dev_{disable,enable}_by_path   Mario Six
• [U-Boot] [PATCH v2 01/10] ram: Add driver for MPC83xx   Mario Six
• [U-Boot] [PATCH v2 3/5] regmap: Define regmap_{get,set}   Mario Six
• [U-Boot] [PATCH v2 02/10] sysreset: Add get_status method   Mario Six
• [U-Boot] [PATCH v2 03/10] board_f: Add reset status printing   Mario Six
• [U-Boot] [PATCH v2 2/3] mpc83xx/pci: Register IMMR region   Mario Six
• [U-Boot] [PATCH v2 1/5] regmap: Add size parameter   Mario Six
• [U-Boot] [PATCH v2 1/2] misc: uclass: Add enable/disable function   Mario Six
• [U-Boot] [PATCH RFCv2 0/6] Beginning of migration of MPC8xx to DM model   Mario Six
• [U-Boot] [PATCH v2 1/5] drivers: Add OSD uclass   Mario Six
• [U-Boot] [PATCH v2 2/5] video_osd: Add ihs_video_out driver   Mario Six
• [U-Boot] [PATCH v2 3/5] video_osd: Add osd sandbox driver and tests   Mario Six
• [U-Boot] [PATCH v2 4/5] lib: Import hexdump.c from Linux   Mario Six
• [U-Boot] [PATCH v2 5/5] cmd: Add osd commands   Mario Six
• [U-Boot] [PATCH v2 1/7] drivers: Add AXI uclass   Mario Six
• [U-Boot] [PATCH v2 2/7] axi: Add ihs_axi driver   Mario Six
• [U-Boot] [PATCH v2 3/7] axi: Add AXI sandbox driver and simple emulator   Mario Six
• [U-Boot] [PATCH v2 4/7] sandbox: Add and build AXI bus and device   Mario Six
• [U-Boot] [PATCH v2 5/7] test: Add AXI test   Mario Six
• [U-Boot] [PATCH v2 6/7] cmd: Add axi command   Mario Six
• [U-Boot] [PATCH v2 7/7] video_display: Add Xilinx LogiCore DP TX   Mario Six
• [U-Boot] [PATCH v3 1/3] misc: docs: Fix comments in misc.h   Mario Six
• [U-Boot] [PATCH v3 2/3] misc: uclass: Add enable/disable function   Mario Six
• [U-Boot] [PATCH v3 3/3] misc: Add gdsys_ioep driver   Mario Six
• [U-Boot] [PATCH v3 01/11] ram: Add driver for MPC83xx   Mario Six
• [U-Boot] [PATCH v3 02/11] sysreset: Add get_status method   Mario Six
• [U-Boot] [PATCH v3 03/11] test: Add tests for sysreset_get_status   Mario Six
• [U-Boot] [PATCH v3 04/11] board_f: Add reset status printing   Mario Six
• [U-Boot] [PATCH v3 05/11] mpc83xx: Add sysreset driver   Mario Six
• [U-Boot] [PATCH v3 06/11] clk: Add MPC83xx clock driver   Mario Six
• [U-Boot] [PATCH v3 07/11] timer: Add MPC83xx timer driver   Mario Six
• [U-Boot] [PATCH v3 08/11] common: board_f: Sort includes   Mario Six
• [U-Boot] [PATCH v3 09/11] board_f: Use static print_cpuinfo if CONFIG_CPU is active   Mario Six
• [U-Boot] [PATCH v3 10/11] cpu: Add MPC83xx CPU driver   Mario Six
• [U-Boot] [PATCH v3 11/11] misc: Add MPC83xx serdes driver   Mario Six
• [U-Boot] [PATCH v2 3/5] video_osd: Add osd sandbox driver and tests   Mario Six
• [U-Boot] [PATCH v2 2/5] video_osd: Add ihs_video_out driver   Mario Six
• [U-Boot] [PATCH v2 4/5] lib: Import hexdump.c from Linux   Mario Six
• [U-Boot] [PATCH v2 5/5] cmd: Add osd commands   Mario Six
• [U-Boot] [PATCH v2 1/5] drivers: Add OSD uclass   Mario Six
• [U-Boot] [PATCH v3 3/3] misc: Add gdsys_ioep driver   Mario Six
• [U-Boot] [PATCH v3 2/3] misc: uclass: Add enable/disable function   Mario Six
• [U-Boot] [PATCH v3 1/3] misc: docs: Fix comments in misc.h   Mario Six
• [U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes   Mario Six
• [U-Boot] [PATCH] mvebu: a38x: Force receiver detected on PCIe lanes   Mario Six
• [U-Boot] No support for "standalone" applications in FIT image?   Brett Stahlman
• [U-Boot] [PATCH v2] MAINTAINERS: Switch nxp.com domain   York Sun
• [U-Boot] [PATCH] driver: net: fsl-mc: updated copyright info   York Sun
• [U-Boot] [PATCH] spi: fsl_qspi: Introduce is_controller_busy function   York Sun
• [U-Boot] [PATCH][v3] mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0   York Sun
• [U-Boot] [PATCH] armv8: layerscape: Avoid code duplication for TZASC Instantiation   York Sun
• [U-Boot] [Patch v2] armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig   York Sun
• [U-Boot] [PATCH][v2] armv8: sec_firmware: Remove JR3 from device tree node in all cases   York Sun
• [U-Boot] [PATCH] armv8: ls1088aqds: Enable mdio commands on u-boot prompt   York Sun
• [U-Boot] [PATCH] armv8: ls1088: Update 1900MT/s DDR timing to bring consistency   York Sun
• [U-Boot] powerpc: mpc85xx: Improve Work-around for Erratum A005125   York Sun
• [U-Boot] [PATCH v2] armv8: sec_firmware: Add support for multiple loadables   York Sun
• [U-Boot] [PATCH] armv8/fsl-lsch2: correct QMAN clock   York Sun
• [U-Boot] [PATCH] armv8/fsl-lsch2: make the workaround for PIN MUX erratum A010539 robust   York Sun
• [U-Boot] [PATCH][v3] mtd: nand: fsl_ifc: Fix nand waitfunc return value   York Sun
• [U-Boot] [PATCH v2] driver: net: fsl-mc: updated copyright info   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH 1/2] watchdog: driver support for layerscape   York Sun
• [U-Boot] [PATCH 1/3] board: Kconfig: Re-Arrangement of PPA firmware and header addresses   York Sun
• [U-Boot] [PATCH] armv8: ls1088a: change dpl load command from apply to lazyapply.   York Sun
• [U-Boot] ls1021atwr: Convert to use driver model TSEC driver   York Sun
• [U-Boot] [PATCH 1/2] watchdog: driver support for layerscape   York Sun
• [U-Boot] [PATCH 1/2] watchdog: driver support for layerscape   York Sun
• [U-Boot] [PATCH] arm: Add support for Trenz TE0820 (zynqmp)   Vladimir Svoboda
• [U-Boot] [PATCH v2 0/1] Support for Trenz TE0820 on Sundance EMC2-DP-V2   Vladimir Svoboda
• [U-Boot] [PATCH v2 1/1] arm: Add support for Trenz TE0820 on Sundance EMC2-DP-V2   Vladimir Svoboda
• [U-Boot] mkenvimage.c:119:35: error: ‘PLAIN_VERSION’ undeclared   Ed Swarthout
• [U-Boot] [PATCH v2] MAINTAINERS: Switch nxp.com domain   Timur Tabi
• [U-Boot] [PATCH 1/2] p1022ds: Change Timur's email address   Timur Tabi
• [U-Boot] SYS_HAVE_*CACHE_MAINTENANCE   AKASHI Takahiro
• [U-Boot] inappropriate PCI configuration on arm64 qemu?   AKASHI Takahiro
• [U-Boot] inappropriate PCI configuration on arm64 qemu?   AKASHI Takahiro
• [U-Boot] [PATCH v2 0/3] drivers: Add reset ctrl to drivers   Ley Foon Tan
• [U-Boot] [PATCH v2 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v2 2/3] serial: ns16550: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v2 3/3] net: designware: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v2 2/3] serial: ns16550: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH] spi: cadence_qspi: Change to use devfdt_get_addr_index()   Ley Foon Tan
• [U-Boot] [PATCH] spi: cadence_qspi: Fix compilation warning   Ley Foon Tan
• [U-Boot] [PATCH] spi: cadence_qspi: Fix warning cast from pointer to integer of different size   Ley Foon Tan
• [U-Boot] [PATCH v3 0/3] drivers: Add reset ctrl to drivers   Ley Foon Tan
• [U-Boot] [PATCH v3 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v3 2/3] serial: ns16550: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v3 3/3] net: designware: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v1 14/16] ddr: altera: stratix10: Add DDR support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v1 14/16] ddr: altera: stratix10: Add DDR support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH] fdt: Add another Altera Arria10 clock init compatible   Ley Foon Tan
• [U-Boot] [PATCH] ARM: socfpga: Zap CONFIG_SOCFPGA_VIRTUAL_TARGET   Ley Foon Tan
• [U-Boot] [PATCH] ARM: socfpga: Clean up Kconfig entries   Ley Foon Tan
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Ley Foon Tan
• [U-Boot] [PATCH 02/12] ARM: socfpga: Sort the DT Makefile   Ley Foon Tan
• [U-Boot] [PATCH 05/12] ARM: socfpga: Repair A10 EMAC reset handling   Ley Foon Tan
• [U-Boot] [PATCH 10/12] ARM: socfpga: Enable SPL memory allocation   Ley Foon Tan
• [U-Boot] [PATCH] spi: cadence_qspi: Change to use devfdt_get_addr_index()   Ley Foon Tan
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Ley Foon Tan
• [U-Boot] [PATCH v2 00/16] Add Intel Stratix 10 SoC support   Ley Foon Tan
• [U-Boot] [PATCH v2 01/16] arm: socfpga: stratix10: Add watchdog and firewall base addresses   Ley Foon Tan
• [U-Boot] [PATCH v2 02/16] arm: socfpga: stratix10: Add clock manager driver for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 03/16] arm: socfpga: stratix10: Add reset manager driver for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 04/16] arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch   Ley Foon Tan
• [U-Boot] [PATCH v2 06/16] arm: socfpga: misc: Move bridge command to misc common   Ley Foon Tan
• [U-Boot] [PATCH v2 07/16] arm: socfpga: stratix10: Add misc support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 09/16] arm: socfpga: stratix10: Add MMU support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 10/16] arm: socfpga: Restructure the SPL file   Ley Foon Tan
• [U-Boot] [PATCH v2 11/16] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 12/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 13/16] ddr: altera: stratix10: Add DDR support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 14/16] board: altera: stratix10: Add socdk board support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v2 15/16] arm: dts: socfpga: stratix10: update dtsi and dts   Ley Foon Tan
• [U-Boot] [PATCH v2 16/16] arm: socfpga: stratix10: Enable Stratix10 SoC build   Ley Foon Tan
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Ley Foon Tan
• [U-Boot] [PATCH v3 00/10] Add Intel Stratix 10 SoC support   Ley Foon Tan
• [U-Boot] [PATCH v3 01/10] arm: socfpga: misc: Move bridge command to misc common   Ley Foon Tan
• [U-Boot] [PATCH v3 02/10] arm: socfpga: stratix10: Add misc support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v3 03/10] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v3 04/10] arm: socfpga: stratix10: Add MMU support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v3 05/10] arm: socfpga: Restructure the SPL file   Ley Foon Tan
• [U-Boot] [PATCH v3 06/10] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v3 07/10] arm: socfpga: stratix10: Add timer support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v3 08/10] ddr: altera: stratix10: Add DDR support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v3 09/10] board: altera: stratix10: Add socdk board support for Stratix10 SoC   Ley Foon Tan
• [U-Boot] [PATCH v3 10/10] arm: socfpga: stratix10: Enable Stratix10 SoC build   Ley Foon Tan
• [U-Boot] [PATCH v3 00/10] Add Intel Stratix 10 SoC support   Ley Foon Tan
• [U-Boot] [PATCH v3 3/3] net: designware: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v3 2/3] serial: ns16550: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v3 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [U-Boot, v3, 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Ley Foon Tan
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Ley Foon Tan
• [U-Boot] [U-Boot, v3, 1/3] mmc: dwmmc: socfpga: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] help on DM   Andy Tang
• [U-Boot] help on DM   Andy Tang
• [U-Boot] [PATCH 3/4] scsi: ceva: add ls1012a soc support   Andy Tang
• [U-Boot] [PATCH v2 0/5] sunxi: Add support for ALL-H3-CC H2+/H5 variants   Jagan Teki
• [U-Boot] [PATCH v1 06/11] spi: stm32_qspi: Update mode management   Jagan Teki
• [U-Boot] [PATCH] drivers: spi: migrate cf_spi to DM   Jagan Teki
• [U-Boot] [PATCH v2 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support   Jagan Teki
• [U-Boot] [PATCH v3 0/7] i.MX6DL: Add BTicino Mamoj board support   Jagan Teki
• [U-Boot] [PATCH v3 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support   Jagan Teki
• [U-Boot] [PATCH v3 2/7] i.MX6DL: mamoj: Add I2C support   Jagan Teki
• [U-Boot] [PATCH v3 3/7] i.MX6DL: mamoj: Add PFUZE100 support   Jagan Teki
• [U-Boot] [PATCH v3 4/7] configs: imx6dl_mamoj: Enable fastboot and ums   Jagan Teki
• [U-Boot] [PATCH v3 5/7] configs: imx6dl-mamoj: Add DFU support   Jagan Teki
• [U-Boot] [PATCH v3 6/7] configs: imx6dl-mamoj: Add Falcon mode support   Jagan Teki
• [U-Boot] [PATCH v3 7/7] configs: imx6dl-mamoj: Enable HAB   Jagan Teki
• [U-Boot] [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY   Jagan Teki
• [U-Boot] [PATCH v7 01/35] usb: sunxi: Simplify ccm reg base code   Jagan Teki
• [U-Boot] [PATCH v7 02/35] musb: sunxi: Add proper macros instead of numericals   Jagan Teki
• [U-Boot] [PATCH v7 03/35] musb: sunxi: Use simple way to fill musb_hdrc pdata   Jagan Teki
• [U-Boot] [PATCH v7 04/35] musb: sunxi: Add fifo config   Jagan Teki
• [U-Boot] [PATCH v7 05/35] sunxi: clock: Fix clock gating for H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Jagan Teki
• [U-Boot] [PATCH v7 07/35] musb: sunxi: Use BIT instead of numerical shift   Jagan Teki
• [U-Boot] [PATCH v7 08/35] sunxi: clock: Fix OHCI clock gating for H3/H5   Jagan Teki
• [U-Boot] [PATCH v7 09/35] musb: sunxi: Add support for H3/H5A64   Jagan Teki
• [U-Boot] [PATCH v7 10/35] phy: Add Allwinner A64 USB PHY driver   Jagan Teki
• [U-Boot] [PATCH v7 11/35] phy: sun4i-usb: Add id_detect and vbus_detect ops   Jagan Teki
• [U-Boot] [PATCH v7 12/35] phy: sun4i-usb: Add H3/H5 PHY config   Jagan Teki
• [U-Boot] [PATCH v7 13/35] phy: sun4i-usb: Add V3S PHY config   Jagan Teki
• [U-Boot] [PATCH v7 14/35] phy: sun4i-usb: Add A83T USB PHY config   Jagan Teki
• [U-Boot] [PATCH v7 15/35] phy: sun4i-usb: Add A10/A13/A20 PHY config   Jagan Teki
• [U-Boot] [PATCH v7 16/35] phy: sun4i-usb: Add A31 PHY config   Jagan Teki
• [U-Boot] [PATCH v7 17/35] phy: sun4i-usb: Add A33 USB PHY config   Jagan Teki
• [U-Boot] [PATCH v7 18/35] phy: sun4i-usb: Add A23 USB PHY config   Jagan Teki
• [U-Boot] [PATCH v7 19/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings   Jagan Teki
• [U-Boot] [PATCH v7 20/35] board: sunxi: Use generic-phy for board_usb_cable_connected   Jagan Teki
• [U-Boot] [PATCH v7 21/35] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect   Jagan Teki
• [U-Boot] [PATCH v7 22/35] usb: sunxi: Switch to use generic-phy   Jagan Teki
• [U-Boot] [PATCH v7 23/35] sunxi: Drop legacy usb_phy.c   Jagan Teki
• [U-Boot] [PATCH v7 24/35] sunxi: h3: Sync OTG and HCI nodes from Linux DT   Jagan Teki
• [U-Boot] [PATCH v7 25/35] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux   Jagan Teki
• [U-Boot] [PATCH v7 26/35] configs: bananapi-m64: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v7 27/35] ARM: dts: sun8i: a83t: Sync usbphy node from Linux   Jagan Teki
• [U-Boot] [PATCH v7 28/35] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v7 29/35] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v7 30/35] configs: bananapi-m2-plus: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v7 31/35] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic   Jagan Teki
• [U-Boot] [PATCH v7 32/35] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v7 33/35] configs: orangepi-pc2: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v7 34/35] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v7 35/35] configs: orangepi-prime: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v3 6/6] spi: kirkwood: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v3 5/6] spi: kirkwood: Get drvdata in .ofdata_to_platdata   Jagan Teki
• [U-Boot] [PATCH v3 4/6] spi: ti_qspi: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v3 3/6] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v3 2/6] spi: omap3_spi: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v3 1/6] spi: kconfig: Move MPC8XXX_SPI to if DM_SPI   Jagan Teki
• [U-Boot] [PATCH] spi: kirkwood: add orion-spi compatible string   Jagan Teki
• [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH v8 06/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings   Jagan Teki
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Jagan Teki
• [U-Boot] uboot support to Allwinner bananapi zero   Jagan Teki
• [U-Boot] [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY   Jagan Teki
• [U-Boot] [RFC PATCH 0/4] Allwinner H6 support for U-Boot   Jagan Teki
• [U-Boot] [linux-sunxi] Re: [PATCH v4 13/19] sunxi: DT: A64: update board .dts files from Linux   Jagan Teki
• [U-Boot] [PATCH] board: sun50i: Add Amarula A64-Relic initial support   Jagan Teki
• [U-Boot] [PATCH v9 06/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings   Jagan Teki
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH v3 2/2] zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards   Jagan Teki
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v4: Add Bananapi M2 Berry support   Jagan Teki
• [U-Boot] [PATCH v2 1/2] ARM: dts: sun8i: Sync r40 dtsi from Linux   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH] driver/mtd/spi: Default page size Spansion flash "S25FS512S" is 256b   Jagan Teki
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH v2 1/3] spi: sh_qspi: full DM conversion   Jagan Teki
• [U-Boot] [PATCH v3 1/2] spi: zynqmp_gqspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH v2] board: sun50i: Add Amarula A64 Relic initial support   Jagan Teki
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Jagan Teki
• [U-Boot] [PATCH] spi: Zap fsl_espi driver   Jagan Teki
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Jagan Teki
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Jagan Teki
• [U-Boot] [PATCH v4 1/2] pwm: sunxi: add support for PWM found on Allwinner A64   Jagan Teki
• [U-Boot] [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY   Jagan Teki
• [U-Boot] [PATCH v2 00/10] Update STM32 QSPI driver   Jagan Teki
• [U-Boot] [PATCH] sf: Add support for ISSI is25wp   Jagan Teki
• [U-Boot] [PATCH] driver/mtd/spi: Default page size Spansion flash "S25FS512S" is 256b   Jagan Teki
• [U-Boot] [PATCH] spi: cadence_qspi: Change to use devfdt_get_addr_index()   Jagan Teki
• [U-Boot] [PATCH v2 0/2] sunxi: fix eMMC stability issues on A64   Jagan Teki
• [U-Boot] [PATCH] Revert "sunxi: binman: Add U-Boot binary size check"   Jagan Teki
• [U-Boot] [PATCH 1/1] spi: lpc32xx: simplify logical expression   Jagan Teki
• [U-Boot] [PATCH 1/1] spi: fsl_qspi: remove superfluous assignment   Jagan Teki
• [U-Boot] [PATCH 1/1] spi: atcspi200: avoid NULL dereference   Jagan Teki
• [U-Boot] [PATCH] sf: Add Macronix MX25U25645G ID   Jagan Teki
• [U-Boot] [PATCH v3 1/7] i.MX6: board: Add BTicino i.MX6DL Mamoj initial support   Jagan Teki
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Jagan Teki
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Jagan Teki
• [U-Boot] mtd: spi-nor: new NXP FlexSPI driver location & framework to use ?   Jagan Teki
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Jagan Teki
• [U-Boot] BPI-M2 Magic: DRAM:Timeout initialising DRAM   Jagan Teki
• [U-Boot] [linux-sunxi] Re: [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY   Jagan Teki
• [U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode on A64   Jagan Teki
• [U-Boot] [PATCH v3] board: sun50i: Add Amarula A64-Relic initial support   Jagan Teki
• [U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY   Jagan Teki
• [U-Boot] [PATCH v10 01/35] usb: sunxi: Simplify ccm reg base code   Jagan Teki
• [U-Boot] [PATCH v10 02/35] musb: sunxi: Add proper macros instead of numericals   Jagan Teki
• [U-Boot] [PATCH v10 03/35] musb: sunxi: Use simple way to fill musb_hdrc pdata   Jagan Teki
• [U-Boot] [PATCH v10 04/35] musb: sunxi: Add fifo config   Jagan Teki
• [U-Boot] [PATCH v10 05/35] sunxi: clock: Fix clock gating for H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v10 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Jagan Teki
• [U-Boot] [PATCH v10 07/35] musb: sunxi: Use BIT instead of numerical shift   Jagan Teki
• [U-Boot] [PATCH v10 08/35] sunxi: clock: Fix OHCI clock gating for H3/H5   Jagan Teki
• [U-Boot] [PATCH v10 09/35] musb: sunxi: Add support for H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v10 10/35] phy: Add Allwinner A64 USB PHY driver   Jagan Teki
• [U-Boot] [PATCH v10 11/35] phy: sun4i-usb: Add id_detect and vbus_detect ops   Jagan Teki
• [U-Boot] [PATCH v10 12/35] phy: sun4i-usb: Add H3/H5 PHY config   Jagan Teki
• [U-Boot] [PATCH v10 13/35] phy: sun4i-usb: Add V3S PHY config   Jagan Teki
• [U-Boot] [PATCH v10 14/35] phy: sun4i-usb: Add A83T USB PHY config   Jagan Teki
• [U-Boot] [PATCH v10 15/35] phy: sun4i-usb: Add A10/A13/A20 PHY config   Jagan Teki
• [U-Boot] [PATCH v10 16/35] phy: sun4i-usb: Add A31 PHY config   Jagan Teki
• [U-Boot] [PATCH v10 17/35] phy: sun4i-usb: Add A33 USB PHY config   Jagan Teki
• [U-Boot] [PATCH v10 18/35] phy: sun4i-usb: Add A23 USB PHY config   Jagan Teki
• [U-Boot] [PATCH v10 19/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings   Jagan Teki
• [U-Boot] [PATCH v10 20/35] board: sunxi: Use generic-phy for board_usb_cable_connected   Jagan Teki
• [U-Boot] [PATCH v10 21/35] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect   Jagan Teki
• [U-Boot] [PATCH v10 22/35] usb: sunxi: Switch to use generic-phy   Jagan Teki
• [U-Boot] [PATCH v10 23/35] sunxi: Drop legacy usb_phy.c   Jagan Teki
• [U-Boot] [PATCH v10 24/35] sunxi: h3: Sync OTG and HCI nodes from Linux DT   Jagan Teki
• [U-Boot] [PATCH v10 25/35] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux   Jagan Teki
• [U-Boot] [PATCH v10 26/35] configs: bananapi-m64: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v10 27/35] ARM: dts: sun8i: a83t: Sync usbphy node from Linux   Jagan Teki
• [U-Boot] [PATCH v10 28/35] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v10 29/35] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v10 30/35] configs: bananapi-m2-plus: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v10 31/35] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic   Jagan Teki
• [U-Boot] [PATCH v10 32/35] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v10 33/35] configs: orangepi-pc2: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v10 34/35] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v10 35/35] configs: orangepi-prime: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH V2] sf: Add Macronix MX25U25635F ID   Jagan Teki
• [U-Boot] [PATCH] sf: Add Winbond W25Q256 ID   Jagan Teki
• [U-Boot] [PATCH] sf: Enable FSR polling on N25Q256(A)   Jagan Teki
• [U-Boot] [PATCH v2 1/2] sunxi-mmc: use new mode on A64   Jagan Teki
• [U-Boot] [PATCH v3] board: sun50i: Add Amarula A64-Relic initial support   Jagan Teki
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Jagan Teki
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH v3] board: sun50i: Add Amarula A64-Relic initial support   Jagan Teki
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   Jagan Teki
• [U-Boot] [PATCH] arm: sunxi: Add support for Pengpod 1000 tablet   Jagan Teki
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   Evan Thompson
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   Evan Thompson
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   Evan Thompson
• [U-Boot] [PATCH 37/41] mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue   Benoît Thébaudeau
• [U-Boot] [PATCH 37/41] mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue   Benoît Thébaudeau
• [U-Boot] [PATCH RFCv2 0/6] Beginning of migration of MPC8xx to DM model   Joakim Tjernlund
• [U-Boot] [PATCH v2 1/3] drivers: Add board uclass   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/2] rockchip: enable SYS_NS16550 for all SoCs by default   Dr. Philipp Tomsich
• [U-Boot] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: clk: rk3288: handle clk_enable requests for GMAC   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, v2, 1/2] rockchip: enable SYS_NS16550 for all SoCs by default   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: set SYS_NS16550_MEM32 for all SoCs   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: set SYS_NS16550_MEM32 for all SoCs   Dr. Philipp Tomsich
• [U-Boot] GCC 7.x vs. C++ comments   Dr. Philipp Tomsich
• [U-Boot] GCC 7.x vs. C++ comments   Dr. Philipp Tomsich
• [U-Boot] rockchip: clk: rk3288: add clk_enable function and support USB HOST0/HSIC   Dr. Philipp Tomsich
• [U-Boot] [PATCH] tools: adopt --std=gnu99 where C99 comments are needed   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Dr. Philipp Tomsich
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Dr. Philipp Tomsich
• [U-Boot] Exception Level switching seems broken on RK3399   Dr. Philipp Tomsich
• [U-Boot] Exception Level switching seems broken on RK3399   Dr. Philipp Tomsich
• [U-Boot] [PATCH v1 1/4] spl: record boot_device into spl_image and call spl_perform_fixups   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rtc: Add read8 and write8 support to isl1208 driver   Dr. Philipp Tomsich
• [U-Boot] Exception Level switching seems broken on RK3399   Dr. Philipp Tomsich
• [U-Boot] rockchip: set SYS_NS16550_MEM32 for all SoCs   Philipp Tomsich
• [U-Boot] rockchip: set SYS_NS16550_MEM32 for all SoCs   Philipp Tomsich
• [U-Boot] rockchip: set SYS_NS16550_MEM32 for all SoCs   Philipp Tomsich
• [U-Boot] [U-Boot,1/3] sf: Add GigaDevice gd25q32b entry   Philipp Tomsich
• [U-Boot] rockchip: set SYS_NS16550_MEM32 for all SoCs   Philipp Tomsich
• [U-Boot] [PATCH] tools: adopt --std=gnu99 where C99 comments are needed   Philipp Tomsich
• [U-Boot] [PATCH v2] Makefile: adopt --std=gnu11 for HOSTCFLAGS on Linux   Philipp Tomsich
• [U-Boot] rockchip: clk: rk3288: handle clk_enable requests for GMAC   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: xhci: remove DTS parsing for PHY (which is unused)   Philipp Tomsich
• [U-Boot] [PATCH v1 0/4] Inject boot-device into DTS and use in distro-boot on the RK3399-Q7   Philipp Tomsich
• [U-Boot] [PATCH v1 1/4] spl: record boot_device into spl_image and call spl_perform_fixups   Philipp Tomsich
• [U-Boot] [PATCH v1 2/4] spl: document 'chosen/u-boot, spl-boot-device'   Philipp Tomsich
• [U-Boot] [PATCH v1 3/4] rockchip: rk3399: inject 'u-boot, spl-boot-device' for next-stage   Philipp Tomsich
• [U-Boot] [PATCH v1 4/4] rockchip: rk3399: change boot_target based on u-boot, spl-boot-device   Philipp Tomsich
• [U-Boot] uboot support to Allwinner bananapi zero   Chen-Yu Tsai
• [U-Boot] [PATCH 3/3] ARM: rmobile: Contain CONFIG_ARCH_RMOBILE_BOARD_STRING   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/3] net: Drop CONFIG_TSI108_ETH   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/3] i2c: Drop CONFIG_TSI108_I2C   Tuomas Tynkkynen
• [U-Boot] [PATCH 3/3] i2c: Drop CONFIG_SH_SH7734_I2C   Tuomas Tynkkynen
• [U-Boot] [PATCH v2 1/1] arm: print instructions pointed to by pc   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/3] PCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/3] ARM: qemu-arm: Bump RAM size in AArch64 MMU table   Tuomas Tynkkynen
• [U-Boot] [PATCH 3/3] doc: qemu-arm: Drop highmem=off references   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/2] PCI: Add newlines to debug prints in pci_auto_common.c   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/2] PCI: autoconfig: Don't allocate 64-bit addresses to 32-bit only resources   Tuomas Tynkkynen
• [U-Boot] [PATCH] PCI: Document pciauto_region_allocate()   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/2] ARM: Add a new arch + board for QEMU's 'virt' machine   Tuomas Tynkkynen
• [U-Boot] [PATCH] rpi: Adjust fdt_addr_r to a sane address   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/2] rpi: Fix fdt_high & initrd_high for 64-bit builds   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/2] efi_loader: build CRT0 and RELOC on x86_64   Tuomas Tynkkynen
• [U-Boot] Parallel make issue with helloworld.efi   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/1] efi_loader: avoid make race condition   Tuomas Tynkkynen
• [U-Boot] inappropriate PCI configuration on arm64 qemu?   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/2] board: move ppa firmware address in board specific kconfig   Bhaskar Upadhaya
• [U-Boot] [PATCH 2/2] board: ls1012a: FRWY-LS1012A board support   Bhaskar Upadhaya
• [U-Boot] [PATCH v2 1/2] board: move ppa firmware address in board specific kconfig   Bhaskar Upadhaya
• [U-Boot] [PATCH 1/3] board: Kconfig: Re-Arrangement of PPA firmware and header addresses   Bhaskar Upadhaya
• [U-Boot] [PATCH 2/3] board: ls1012a: FRWY-LS1012A board support   Bhaskar Upadhaya
• [U-Boot] [PATCH 3/3] LS1012AFRWY: Add Secure Boot support   Bhaskar Upadhaya
• [U-Boot] [PATCH 3/5] api: Flush cache when closing api   Emmanuel Vadot
• [U-Boot] [PATCH] video: sunxi: de2: Reserve the fb region in the EFI memory map   Emmanuel Vadot
• [U-Boot] [PATCH 0/5] Add KConfig option for cache maintenance availability   Emmanuel Vadot
• [U-Boot] [PATCH] arm64: zynqmp: accept an absolute path for PMUFW_INIT_FILE   Emmanuel Vadot
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Rajan Vaja
• [U-Boot] Logo for U-Boot   Marek Vasut
• [U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver   Marek Vasut
• [U-Boot] [PATCH 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: rmobile: Enable DM capable RCar I2C driver on Silk   Marek Vasut
• [U-Boot] [PATCH] doc: rmobile: Update the README   Marek Vasut
• [U-Boot] [PATCH] clk: renesas: Drop USB extal from the R8A7792 clock driver   Marek Vasut
• [U-Boot] [PATCH 1/3] ARM: rmobile: Fix CONFIG_RMOBILE_BOARD_STRING   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: rmobile: Convert CONFIG_ARCH_RMOBILE_BOARD_STRING to Kconfig   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: rmobile: Contain CONFIG_ARCH_RMOBILE_BOARD_STRING   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Zap #undef DEBUG   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] Logo for U-Boot   Marek Vasut
• [U-Boot] Logo for U-Boot   Marek Vasut
• [U-Boot] [PATCH v5 3/9] phy: Add a new driver for OMAP's USB2 PHYs   Marek Vasut
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Marek Vasut
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Marek Vasut
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Marek Vasut
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Marek Vasut
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Marek Vasut
• [U-Boot] [PATCH v7 19/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings   Marek Vasut
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Marek Vasut
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Marek Vasut
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Marek Vasut
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Marek Vasut
• [U-Boot] [PATCH v8 06/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings   Marek Vasut
• [U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver   Marek Vasut
• [U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH v1 14/16] ddr: altera: stratix10: Add DDR support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager   Marek Vasut
• [U-Boot] [PATCH v3 3/3] spi: mxs_spi: DM conversion   Marek Vasut
• [U-Boot] [PATCH v1] ubifs: avoid assert failed in ubifs.c   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH v3 3/3] spi: mxs_spi: DM conversion   Marek Vasut
• [U-Boot] [PATCH v3 3/3] spi: mxs_spi: DM conversion   Marek Vasut
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Marek Vasut
• [U-Boot] [PATCH] spl: fit: Add support for loading FPGA bitstream   Marek Vasut
• [U-Boot] [PATCH] fdt: Add another Altera Arria10 clock init compatible   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Zap CONFIG_SOCFPGA_VIRTUAL_TARGET   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Clean up Kconfig entries   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Marek Vasut
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Marek Vasut
• [U-Boot] [PATCH 02/12] ARM: socfpga: Sort the DT Makefile   Marek Vasut
• [U-Boot] [PATCH 03/12] ARM: socfpga: Synchronize Arria10 DTs   Marek Vasut
• [U-Boot] [PATCH 04/12] ARM: socfpga: Synchronize Arria10 SoCDK SDMMC handoff   Marek Vasut
• [U-Boot] [PATCH 05/12] ARM: socfpga: Repair A10 EMAC reset handling   Marek Vasut
• [U-Boot] [PATCH 06/12] ARM: socfpga: Rename the gen5 sdram driver to more specific name   Marek Vasut
• [U-Boot] [PATCH 07/12] ARM: socfpga: Add DRAM bank size initialization function   Marek Vasut
• [U-Boot] [PATCH 08/12] ARM: socfpga: Add DDR driver for Arria 10   Marek Vasut
• [U-Boot] [PATCH 09/12] configs: Add DDR Kconfig support for Arria 10   Marek Vasut
• [U-Boot] [PATCH 10/12] ARM: socfpga: Enable SPL memory allocation   Marek Vasut
• [U-Boot] [PATCH 11/12] ARM: socfpga: Adding clock frequency info for U-Boot   Marek Vasut
• [U-Boot] [PATCH 12/12] ARM: socfpga: Adding SoCFPGA info for both SPL and U-Boot   Marek Vasut
• [U-Boot] [PATCH 1/4] i2c: rcar_i2c: Remove the driver   Marek Vasut
• [U-Boot] [PATCH V2 2/4] i2c: rcar_i2c: Add DM and DT capable I2C driver   Marek Vasut
• [U-Boot] [PATCH 3/4] ARM: rmobile: Enable DM capable RCar I2C driver on Lager   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: rmobile: Enable DM capable RCar I2C driver on Silk   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Update V2H Blanche   Marek Vasut
• [U-Boot] [PATCH 1/6] ARM: rmobile: Drop old R8A7790 PFC tables   Marek Vasut
• [U-Boot] [PATCH 2/6] ARM: rmobile: Drop old R8A7791 PFC tables   Marek Vasut
• [U-Boot] [PATCH 3/6] ARM: rmobile: Drop old R8A7792 PFC tables   Marek Vasut
• [U-Boot] [PATCH 4/6] ARM: rmobile: Drop old R8A7793 PFC tables   Marek Vasut
• [U-Boot] [PATCH 5/6] ARM: rmobile: Drop old R8A7794 PFC tables   Marek Vasut
• [U-Boot] [PATCH 6/6] ARM: rmobile: Unify Gen2 Makefile entry   Marek Vasut
• [U-Boot] [PATCH 1/3] fit: Fix CONFIG_FIT_SPL_PRINT   Marek Vasut
• [U-Boot] [PATCH 2/3] fit: Add empty fit_print_contents() and fit_image_print()   Marek Vasut
• [U-Boot] [PATCH 3/3] fit: Add standalone image type handling   Marek Vasut
• [U-Boot] [PATCH] spl: Add full fitImage support   Marek Vasut
• [U-Boot] [PATCH v2 1/1] arm: print instructions pointed to by pc   Marek Vasut
• [U-Boot] [PATCH 3/3] fpga: zynqmp: Fix the nonsecure bitstream loading issue   Marek Vasut
• [U-Boot] [PATCH v2] board: sun50i: Add Amarula A64 Relic initial support   Marek Vasut
• [U-Boot] [PATCH] net: include/phy.h: add new mode for internal phy   Marek Vasut
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (13.05.2018)   Marek Vasut
• [U-Boot] [PATCH] spl: Add full fitImage support   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Marek Vasut
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Marek Vasut
• [U-Boot] [PATCH] ext4fs: Add ext4 extent tree cache   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Marek Vasut
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: correctly reserve SRAM for boot counter   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: fix CONFIG_SPL_MAX_SIZE (less than SRAM)   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Put stack at the end of SRAM   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: fix CONFIG_SPL_MAX_SIZE (less than SRAM)   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: fix CONFIG_SPL_MAX_SIZE (less than SRAM)   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: fix CONFIG_SPL_MAX_SIZE (less than SRAM)   Marek Vasut
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Marek Vasut
• [U-Boot] [PATCH v5 4/9] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Marek Vasut
• [U-Boot] [cosmetic PATCH v1] ARM: socfpga: Fix Documentation errors in scu_registers   Marek Vasut
• [U-Boot] [PATCH v2] phy: add support for STM32 usb phy controller   Marek Vasut
• [U-Boot] [PATCH] drivers: usb: dwc3: remove devm_zalloc from linux_compact   Marek Vasut
• [U-Boot] [PATCH 1/6] usb: dwc3: Add dwc3_init/remove with DM_USB   Marek Vasut
• [U-Boot] [PATCH 3/6] usb: dwc3: Add generic DWC3 glue logic driver   Marek Vasut
• [U-Boot] [PATCH] sf: Add Winbond W25Q256 ID   Marek Vasut
• [U-Boot] [PATCH] sf: Add Macronix MX25U25645G ID   Marek Vasut
• [U-Boot] [PATCH] usb: xhci: zynqmp: Fix header location   Marek Vasut
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Marek Vasut
• [U-Boot] [PATCH 1/6] usb: dwc3: Add dwc3_init/remove with DM_USB   Marek Vasut
• [U-Boot] [PATCH 3/6] usb: dwc3: Add generic DWC3 glue logic driver   Marek Vasut
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Marek Vasut
• [U-Boot] [PATCH V2] sf: Add Macronix MX25U25635F ID   Marek Vasut
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Marek Vasut
• [U-Boot] [PATCH] sunxi: Enable fitImage support on OrangePi Zero   Marek Vasut
• [U-Boot] [PATCH] pylibfdt: Add missing CC and LD to Makefile   Marek Vasut
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Marek Vasut
• [U-Boot] [PATCH] pylibfdt: Add missing CC and LD to Makefile   Marek Vasut
• [U-Boot] [PATCH V2] pylibfdt: Add missing CC and LD to Makefile   Marek Vasut
• [U-Boot] [PATCH v2 07/16] arm: socfpga: stratix10: Add misc support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH v2 05/16] arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch   Marek Vasut
• [U-Boot] [PATCH v2 06/16] arm: socfpga: misc: Move bridge command to misc common   Marek Vasut
• [U-Boot] [PATCH v2 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH v2 09/16] arm: socfpga: stratix10: Add MMU support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH v2 12/16] arm: socfpga: stratix10: Add timer support for Stratix10 SoC   Marek Vasut
• [U-Boot] [PATCH v2 15/16] arm: dts: socfpga: stratix10: update dtsi and dts   Marek Vasut
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Marek Vasut
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Marek Vasut
• [U-Boot] [PATCH 01/12] ARM: socfpga: Sync A10 clock manager binding parser   Marek Vasut
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Marek Vasut
• [U-Boot] [PATCH v2 0/6] Convert Xilinx ZynqMP to DM_USB with generic DWC3 glue logic driver   Marek Vasut
• [U-Boot] [PATCH] sunxi: Enable fitImage support on OrangePi Zero   Marek Vasut
• [U-Boot] [PATCH v7 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5   Marek Vasut
• [U-Boot] [PATCH] sunxi: Enable fitImage support on OrangePi Zero   Marek Vasut
• [U-Boot] [xHCI] Controller failure with USB 3.0 hub   Marek Vasut
• [U-Boot] Enabling i.mx6 high assurance boot appears to breaks u-boot verified-boot   Marek Vasut
• [U-Boot] [xHCI] Controller failure with USB 3.0 hub   Marek Vasut
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Marek Vasut
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Marek Vasut
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH v2] ehci: Replace board_prepare_usb with board_usb_init   Marek Vasut
• [U-Boot] [PATCH v2] ehci: Replace board_prepare_usb with board_usb_init   Marek Vasut
• [U-Boot] [RFC][PATCH] block: Enable block cache by default   Marek Vasut
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Marek Vasut
• [U-Boot] [PATCH] dm: usb: setup ehci gadget before usb is probed   Marek Vasut
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Marek Vasut
• [U-Boot] [PATCH] dm: usb: setup ehci gadget before usb is probed   Marek Vasut
• [U-Boot] [PATCH v1] ubifs: avoid assert failed in ubifs.c   Marek Vasut
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Marek Vasut
• [U-Boot] [linux-sunxi] Re: [PATCH v7 00/35] phy: sunxi: Add Allwinner sun4i USB PHY   Marek Vasut
• [U-Boot] [PATCH] usb: xhci-rcar: deregister before deactivating clock   Marek Vasut
• [U-Boot] [PATCH] fit: Enable fitImage by default if OF_LIBFDT is enabled   Marek Vasut
• [U-Boot] [PATCH] sunxi: Enable fitImage support on OrangePi Zero   Marek Vasut
• [U-Boot] [PATCH] soc: zynqmp: Update required API version to 1.0   Marek Vasut
• [U-Boot] [PATCH v3 00/10] Add Intel Stratix 10 SoC support   Marek Vasut
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   Marek Vasut
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   Marek Vasut
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   Marek Vasut
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   Marek Vasut
• [U-Boot] [PATCH 1/4] usb: xhci: Set accurate add context flags when updating hub attributes   Marek Vasut
• [U-Boot] [PATCH v2 1/1] arm: print instructions pointed to by pc   Marek Vasut
• [U-Boot] [PATCH] rockchip: xhci: remove DTS parsing for PHY (which is unused)   Marek Vasut
• [U-Boot] usb: Fail to get descriptor for USB 2.0 device   Marek Vasut
• [U-Boot] [PATCH] sf: Set current flash bank to 0 in clean_bar()   Marek Vasut
• [U-Boot] [PATCH] sf: Enable FSR polling on N25Q256(A)   Marek Vasut
• [U-Boot] [PATCH] sf: Enable FSR polling on N25Q256(A)   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: socfpga: Adjust NAND register layout on Arria10   Marek Vasut
• [U-Boot] [PATCH] ddr: altera: Drop custom dram_bank_mmu_setup() on Arria10   Marek Vasut
• [U-Boot] [PATCH] ddr: altera: Add ECC DRAM scrubbing support for Arria10   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Pull DRAM size from DT   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Make DRAM node available in SPL   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Assure correct ACTLR configuration   Marek Vasut
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (30.05.2018)   Marek Vasut
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Marek Vasut
• [U-Boot] [PATCH] sf: ensure flash device is in 3-byte address mode   Marek Vasut
• [U-Boot] [PATCH 0/5] Add DMA driver for DMA330 controller   Marek Vasut
• [U-Boot] [PATCH 0/5] Add DMA driver for DMA330 controller   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Assure correct ACTLR configuration   Marek Vasut
• [U-Boot] [PATCH] sf: Set current flash bank to 0 in clean_bar()   Marek Vasut
• [U-Boot] [PATCH] fit: Verify all configuration signatures   Marek Vasut
• [U-Boot] [PATCH] spl: fat: Support full fitImage handling   Marek Vasut
• [U-Boot] [PATCH] spl: spi: Support full fitImage handling   Marek Vasut
• [U-Boot] [PATCH] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Marek Vasut
• [U-Boot] [PATCH] spl: fit: Fix support for loading FPGA bitstream   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   Petr Vorel
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   Petr Vorel
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Petr Vorel
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Petr Vorel
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Petr Vorel
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Petr Vorel
• [U-Boot] [PATCH v3 1/6] kconfig: re-sync with Linux 4.17-rc4   Petr Vorel
• [U-Boot] [PATCH] fit signature: Add fallback of required keys   Sam Voss
• [U-Boot] [PATCH] arm: mach-omap2: cache: Explicitly enable I cache   Lokesh Vutla
• [U-Boot] [PATCH 1/2] enable CONFIG_DISTRO_DEFAULTS for LS-CHLv2 board   Michael Walle
• [U-Boot] [RFC PATCH 2/2] arm: kirkwood: lsxl: Add SPI driver model support   Michael Walle
• [U-Boot] [PATCH] armv8: ls1088a: Enable USB in ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig   Ran Wang
• [U-Boot] [PATCH 2/2] test: Fix test_vboot to call openssl without redirection   Stephen Warren
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Stephen Warren
• [U-Boot] [PATCH v2 2/2] test/py: add test for whitelist of variables while importing environment   Stephen Warren
• [U-Boot] [PATCH] dlmalloc: ensure gd is set for early free   Stephen Warren
• [U-Boot] Tegra U-Boot Patches   Tom Warren
• [U-Boot] Tegra U-Boot Patches   Tom Warren
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH v2 1/2] cmd: nvedit: add whitelist option for env import   Lothar Waßmann
• [U-Boot] [PATCH v3 1/2] cmd: nvedit: env import can now import only variables passed as parameters   Lothar Waßmann
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Richard Weinberger
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Richard Weinberger
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Richard Weinberger
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Richard Weinberger
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Richard Weinberger
• [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux   Richard Weinberger
• [U-Boot] UBI: regression since "mtd: ubi: Fix worker handling"   Richard Weinberger
• [U-Boot] [PATCH v1] ubifs: avoid assert failed in ubifs.c   Richard Weinberger
• [U-Boot] [PATCH 1/2] fit: allow fit to call hardware accelerated hash   Ben Whitten
• [U-Boot] [PATCH 2/2] crypto: add Atmel hardware acceleration for SHA1 & 256   Ben Whitten
• [U-Boot] mainline u-boot on radxarock (rockchip rk3188) from SDcard   Trevor Woerner
• [U-Boot] Zynq: CONFIG_BOARD_RESET or reset_misc(), or ...?   Leon Woestenberg
• [U-Boot] [PATCH 0/7] ARM: uniphier: support drive-strength pin configuration   Masahiro Yamada
• [U-Boot] [PATCH 1/7] pinctrl: uniphier: remove unneeded pin data of LD6b   Masahiro Yamada
• [U-Boot] [PATCH 2/7] pinctrl: uniphier: replace printf() with dev_err()   Masahiro Yamada
• [U-Boot] [PATCH 3/7] pinctrl: uniphier: include <linux/build_bug.h> instead of <linux/bug.h>   Masahiro Yamada
• [U-Boot] [PATCH 4/7] pinctrl: uniphier: support per-pin configuration via DT   Masahiro Yamada
• [U-Boot] [PATCH 5/7] pinctrl: uniphier: support drive-strength configuration   Masahiro Yamada
• [U-Boot] [PATCH 6/7] pinctrl: uniphier: add ethernet TX pin data for LD20   Masahiro Yamada
• [U-Boot] [PATCH 7/7] ARM: uniphier: enable CONFIG_PINCONF   Masahiro Yamada
• [U-Boot] [RFC] Migrate to Linux Kernel style SPDX Tags for v2018.05   Masahiro Yamada
• [U-Boot] [PATCH 0/7] ARM: uniphier: support drive-strength pin configuration   Masahiro Yamada
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   Masahiro Yamada
• [U-Boot] [RFC PATCH 1/2] kconfig: re-sync with Linux 4.17-rc4   Masahiro Yamada
• [U-Boot] [RFC PATCH 2/2] board: eets: pdu001: Fix wrong default value in Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Masahiro Yamada
• [U-Boot] [PATCH v2 5/6] scripts/dtc: Re-sync with Linux 4.17-rc4   Masahiro Yamada
• [U-Boot] [PATCH v2 4/6] scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987   Masahiro Yamada
• [U-Boot] [PATCH v2 3/6] scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9   Masahiro Yamada
• [U-Boot] [PATCH v2 1/6] kconfig: re-sync with Linux 4.17-rc4   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: rename environment variable fdt_name to fdtname   Masahiro Yamada
• [U-Boot] [PATCH V2] pylibfdt: Add missing CC and LD to Makefile   Masahiro Yamada
• [U-Boot] [PATCH] ARM: dts: uniphier: sync with Linux 4.17-rc6   Masahiro Yamada
• [U-Boot] [PATCH 0/4] ARM: dts: uniphier: add additional required properties for ethernet nodes   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: rename environment variable fdt_name to fdtname   Masahiro Yamada
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH] gitignore: remove stale /LOG pattern   Masahiro Yamada
• [U-Boot] [PATCH] menu: fix timeout duration   Masahiro Yamada
• [U-Boot] [PATCH] menu: fix timeout duration   Masahiro Yamada
• [U-Boot] [PATCH v2] menu: fix timeout duration   Masahiro Yamada
• [U-Boot] [PATCH] bug.h: introduce WARN_ONCE   Masahiro Yamada
• [U-Boot] [PATCH] malloc: Use malloc simple before malloc is fully initialized in memalign()   Masahiro Yamada
• [U-Boot] mainline u-boot on radxarock (rockchip rk3188) from SDcard   Kever Yang
• [U-Boot] [PATCH] rockchip: update emmc/sd index   Kever Yang
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   Kever Yang
• [U-Boot] [PATCH] rockchip: update emmc/sd index   Kever Yang
• [U-Boot] [PATCH] rockchip: update emmc/sd index for distro boot order   Kever Yang
• [U-Boot] [PATCH] rockchip: set SYS_NS16550_MEM32 for all SoCs   Kever Yang
• [U-Boot] [PATCH 1/2] watchdog: driver support for layerscape   Xiaoliang Yang
• [U-Boot] [PATCH 2/2] watchdog: Kconfig: add config to disable wdog reset   Xiaoliang Yang
• [U-Boot] [PATCH 1/2] watchdog: driver support for layerscape   Xiaoliang Yang
• [U-Boot] [PATCH 1/2] watchdog: driver support for layerscape   Xiaoliang Yang
• [U-Boot] [RFC PATCH 0/4] Allwinner H6 support for U-Boot   Icenowy Zheng
• [U-Boot] [RFC PATCH 0/3] sunxi: extend SPL header to propagate DRAM size   Icenowy Zheng
• [U-Boot] [RFC PATCH 1/3] sunxi: Extend SPL header versioning   Icenowy Zheng
• [U-Boot] [PATCH v1] EHCI: Fix endian access issue on EHCI intinalization   Yinbo Zhu
• [U-Boot] [PATCH v2 0/3] tegra nand mtd, ubi, driver model and live tree enablement   Marcel Ziswiler
• [U-Boot] [PATCH v2 1/3] mtd: nand: tegra: convert to driver model and live tree   Marcel Ziswiler
• [U-Boot] [PATCH v2 2/3] configs: harmony: enable live tree, mtd and ubi   Marcel Ziswiler
• [U-Boot] [PATCH v2 3/3] configs: colibri_t20: enable mtd   Marcel Ziswiler
• [U-Boot] [PATCH v6 0/6] fix apalis-tk1 pcie gigabit ethernet operation   Marcel Ziswiler
• [U-Boot] [PATCH v6 1/6] configs: apalis-tk1: fix boot failure using ext4 rootfs   Marcel Ziswiler
• [U-Boot] [PATCH v6 2/6] apalis-tk1: add missing as3722 gpio0 configuration   Marcel Ziswiler
• [U-Boot] [PATCH v6 3/6] power: as3722: fix ldo_get/set_enable for ldo index bigger than 7   Marcel Ziswiler
• [U-Boot] [PATCH v6 4/6] pci: tegra: introduce weak tegra_pcie_board_port_reset() function   Marcel Ziswiler
• [U-Boot] [PATCH v6 5/6] power: as3722: add as3722_ldo_set_voltage signature to header file   Marcel Ziswiler
• [U-Boot] [PATCH v6 6/6] apalis-tk1: fix pcie reset for reliable gigabit ethernet operation   Marcel Ziswiler
• [U-Boot] [PATCH v4 0/3] fix apalis_t30 optional pcie operation   Marcel Ziswiler
• [U-Boot] [PATCH v4 1/3] apalis_t30: describe pcie ports   Marcel Ziswiler
• [U-Boot] [PATCH v4 2/3] apalis_t30: fix pcie port 0 and 1 pin muxing   Marcel Ziswiler
• [U-Boot] [PATCH v4 3/3] apalis_t30: fix optional pcie port reset for reliable pcie operation   Marcel Ziswiler
• [U-Boot] Tegra U-Boot Patches   Marcel Ziswiler
• [U-Boot] Tegra U-Boot Patches   Marcel Ziswiler
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   rick at andestech.com
• [U-Boot] [PATCH v3 0/8] riscv: Enable efi_loader support   rick at andestech.com
• [U-Boot] [PATCH v3 2/8] riscv: Enable function sections   rick at andestech.com
• [U-Boot] [PATCH v3 1/8] riscv: Add setjmp/longjmp code   rick at andestech.com
• [U-Boot] [PATCH v3 4/8] riscv: Add board_quiesce_devices stub   rick at andestech.com
• [U-Boot] [PATCH v3 7/8] riscv: nx25: Enable distro boot   rick at andestech.com
• [U-Boot] NDS32 toolchain?   rick at andestech.com
• [U-Boot] Uboot send pull request   uboot at andestech.com
• [U-Boot] Uboot send pull request   uboot at andestech.com
• [U-Boot] U-Boot/Linux and HYP mode on ARMv7 | falstaff - yet another tech...2018-05-17 15:24:28   ashley
• [U-Boot] [PATCH 09/12] ARM: kirkwood: Add device-tree for nsa310s   bodhi bodhi
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   drEagle
• [U-Boot] SPL too big for Turris Omnia in v2018.05   guillaume.gardet at free.fr
• [U-Boot] [PATCH v2] ext4fs: Add ext4 extent tree cache   evan.g.thompson at gmail.com
• [U-Boot] should there be general setbits function?   Mr. goldenstreet
• [U-Boot] [PATCH 0/3] Generic file system firmware loader DM   tien.fong.chee at intel.com
• [U-Boot] [PATCH 1/3] doc: Add new doc for file system firmware loader driver model   tien.fong.chee at intel.com
• [U-Boot] [PATCH 2/3] doc: dtbinding: Add file system firmware loader binding document   tien.fong.chee at intel.com
• [U-Boot] [PATCH 3/3] common: Generic loader for file system   tien.fong.chee at intel.com
• [U-Boot] [PATCH v2 0/3] Generic file system firmware loader DM   tien.fong.chee at intel.com
• [U-Boot] [PATCH v2 1/3] doc: Add new doc for file system firmware loader driver model   tien.fong.chee at intel.com
• [U-Boot] [PATCH v2 2/3] doc: dtbinding: Add file system firmware loader binding document   tien.fong.chee at intel.com
• [U-Boot] [PATCH v2 3/3] common: Generic loader for file system   tien.fong.chee at intel.com
• [U-Boot] [PATCH 0/5] Add DMA driver for DMA330 controller   tien.fong.chee at intel.com
• [U-Boot] [PATCH 1/5] drivers: dma: Enable DMA-330 driver support   tien.fong.chee at intel.com
• [U-Boot] [PATCH 2/5] drivers: dma: Add function to zeroes a range of destination such as memory   tien.fong.chee at intel.com
• [U-Boot] [PATCH 3/5] drivers: dma: Factor out dma_get_device from DMA class function   tien.fong.chee at intel.com
• [U-Boot] [PATCH 4/5] include: dma: Update the function description for dma_memcpy   tien.fong.chee at intel.com
• [U-Boot] [PATCH 5/5] arm: dts: socfpga: stratix10: update pdma   tien.fong.chee at intel.com
• [U-Boot] [PATCH] Remove CONFIG_MVGBE from config_whitelist.txt   christophe leroy
• [U-Boot] [PATCH] board: STiH410-B2260: Add pxefile_addr_r variable   riku.voipio at linaro.org
• [U-Boot] [PATCH 0/4] ahci mvebu driver updates   make at marvell.com
• [U-Boot] [PATCH 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   make at marvell.com
• [U-Boot] [PATCH 2/4] ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds   make at marvell.com
• [U-Boot] [PATCH 3/4] ata: ahci_mvebu: add scsi support   make at marvell.com
• [U-Boot] [PATCH 4/4] arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU   make at marvell.com
• [U-Boot] [PATCH v2 0/4] ahci mvebu driver updates   make at marvell.com
• [U-Boot] [PATCH v2 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   make at marvell.com
• [U-Boot] [PATCH v2 2/4] ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds   make at marvell.com
• [U-Boot] [PATCH v2 3/4] ata: ahci_mvebu: add scsi support   make at marvell.com
• [U-Boot] [PATCH v2 4/4] arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU   make at marvell.com
• [U-Boot] [PATCH v3 0/4] ahci mvebu driver updates   make at marvell.com
• [U-Boot] [PATCH v3 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   make at marvell.com
• [U-Boot] [PATCH v3 2/4] ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds   make at marvell.com
• [U-Boot] [PATCH v3 3/4] ata: ahci_mvebu: add scsi support   make at marvell.com
• [U-Boot] [PATCH v3 4/4] arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU   make at marvell.com
• [U-Boot] [PATCH v4 0/4] ahci mvebu driver updates   make at marvell.com
• [U-Boot] [PATCH v4 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   make at marvell.com
• [U-Boot] [PATCH v4 2/4] ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds   make at marvell.com
• [U-Boot] [PATCH v4 3/4] ata: ahci_mvebu: add scsi support   make at marvell.com
• [U-Boot] [PATCH v4 4/4] arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU   make at marvell.com
• [U-Boot] [PATCH v4 0/4] ahci mvebu driver updates   make at marvell.com
• [U-Boot] [PATCH v4 1/4] ata: mvebu: move mvebu sata driver to drivers/ata directory   make at marvell.com
• [U-Boot] [PATCH v4 2/4] ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds   make at marvell.com
• [U-Boot] [PATCH v4 3/4] ata: ahci_mvebu: add scsi support   make at marvell.com
• [U-Boot] [PATCH v4 4/4] arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU   make at marvell.com
• [U-Boot] [PATCH 1/3] mvebu: pinctrl: sync compatible string with Linux 4.17-rc4   xswang at marvell.com
• [U-Boot] [PATCH 2/3] mvebu: pinctrl: Add SD/eMMC PHY selector to the driver   xswang at marvell.com
• [U-Boot] [PATCH 3/3] dts: mvebu: a80x0: Enable SD/eMMC interfaces   xswang at marvell.com
• [U-Boot] [PATCH v2 1/3] mvebu: pinctrl: sync compatible string with Linux 4.17-rc4   xswang at marvell.com
• [U-Boot] [PATCH v2 2/3] mvebu: pinctrl: Add SD/eMMC PHY selector to the driver   xswang at marvell.com
• [U-Boot] [PATCH v2 3/3] dts: mvebu: a80x0: Enable SD/eMMC interfaces   xswang at marvell.com
• [U-Boot] U-Boot Hole in Verified Boot   Larry.Gass at microchip.com
• [U-Boot] FitImage add pubkey signature in DTS   Larry.Gass at microchip.com
• [U-Boot] [PATCH 1/4] armv8: fsl: remove sata support   andy.tang at nxp.com
• [U-Boot] [PATCH 2/4] armv8: dts: fsl-ls1012a: add sata node support   andy.tang at nxp.com
• [U-Boot] [PATCH 3/4] scsi: ceva: add ls1012a soc support   andy.tang at nxp.com
• [U-Boot] [PATCH 4/4] arm64: ls1012ardb: enable DM support for sata   andy.tang at nxp.com
• [U-Boot] [PATCH] drivers/net/vsc9953: Initialize action RAM in VCAP complex   radu-andrei.bulie at nxp.com
• [U-Boot] [PATCH v2] drivers/net/vsc9953: Initialize action RAM in VCAP complex   radu-andrei.bulie at nxp.com
• [U-Boot] [PATCH v3] drivers/net/vsc9953: Initialize action RAM in VCAP complex   radu-andrei.bulie at nxp.com
• [U-Boot] Make cmd_get_data_size() a dependency of setexpr   qlb1234
• [U-Boot] [RFC] arm: mvebu: Add Helios4 Armada 38x initial support   dgilmore at redhat.com
• [U-Boot] [PATCH] kconfig: Print reverse dependencies in groups   yamada.masahiro at socionext.com
• [U-Boot] [PATCH v11 0/3] Why netboot:   DH at synoia.com
• [U-Boot] [PATCH v11 1/3] Adding TCP and wget into u-boot   DH at synoia.com
• [U-Boot] [PATCH v11 2/3] Adding TCP   DH at synoia.com
• [U-Boot] [PATCH v11 3/3] Add wget, for fast file transfer.   DH at synoia.com
• [U-Boot] How to usage eMMC in pSLC mode with LS1012ARDB   tarkashi
• [U-Boot] [PATCH] rockchip: update emmc/sd index   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH 3/3] rockchip: fix incorrect detection of ram size   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH 2/3] rockchip: add support for veyron-speedy (ASUS Chromebook C201)   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH 2/5] ARM: arm926ejs: fix lowlevel_init call   klaus.goger at theobroma-systems.com
• [U-Boot] Bug#897671: u-boot does not work on sheevaplug   klaus.goger at theobroma-systems.com
• [U-Boot] U-Boot thumb interlink patches   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH v1] rockchip: utilize CONFIG_DEFAULT_FDT_FILE   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH] sunxi: allow CONFIG_DEFAULT_FDT_FILE override   klaus.goger at theobroma-systems.com
• [U-Boot] u-boot 2018 SPI SPL   Mehmet Ali İPİN
• [U-Boot] u-boot 2018 SPI SPL   Mehmet Ali İPİN
• [U-Boot] spi(u-boot)+MMC(Kernel)   Mehmet Ali İPİN
• [U-Boot] [PATCH 0/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings   Jernej Škrabec
• [U-Boot] [PATCH v2 1/2] sunxi: video: HDMI: use correct bits for HSYNC and VSYNC polarity.   Jernej Škrabec
• [U-Boot] [PATCH v2 2/2] video: dw_hdmi: fix HSYNC and VSYNC polarity settings   Jernej Škrabec