[U-Boot] [PATCH 11/12] ARM: kirkwood: Add device-tree for pogo_e02

[Chris Packham]

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

 arch/arm/dts/kirkwood-pogo_e02.dts | 132 +++++++++++++++++++++++++++++
 configs/pogo_e02_defconfig         |   3 +-
 2 files changed, 134 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/kirkwood-pogo_e02.dts

diff --git a/arch/arm/dts/kirkwood-pogo_e02.dts b/arch/arm/dts/kirkwood-pogo_e02.dts
new file mode 100644
index 000000000000..f9e95e55f36d
--- /dev/null
+++ b/arch/arm/dts/kirkwood-pogo_e02.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
+ *
+ * Copyright (C) 2015 Christoph Junghans <ottxor at gentoo.org>
+ *
+ * based on information of dts files from
+ *  Arch Linux ARM by Oleg Rakhmanov <moonman.ca at gmail.com>
+ *  OpenWrt by Felix Kaechele <heffer at fedoraproject.org>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Cloud Engines Pogoplug E02";
+	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "pogo_e02:green:health";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "pogo_e02:orange:fault";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+		      &pmx_led_green >;
+	pinctrl-names = "default";
+
+	pmx_usb_power_enable: pmx-usb-power-enable {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_orange: pmx-led-orange {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition at 0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition at 100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition at 500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition at 2500000 {
+		label = "root";
+		reg = <0x02500000 0x5b00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy at 0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port at 0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/configs/pogo_e02_defconfig b/configs/pogo_e02_defconfig
index 8e01582b5565..94a3b1aedb76 100644
--- a/configs/pogo_e02_defconfig
+++ b/configs/pogo_e02_defconfig
@@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
 CONFIG_SYS_TEXT_BASE=0x600000
 CONFIG_TARGET_POGO_E02=y
 CONFIG_IDENT_STRING="\nPogo E02"
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogo_e02"
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="PogoE02> "
@@ -18,10 +19,10 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_JFFS2=y
 CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 # CONFIG_MMC is not set
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
-- 
2.17.0