[U-Boot] [PATCH v6 7/7] sunxi: DT: A64: add Pine64-LTS support

[Maxime Ripard]

Hi Andre,

On Wed, May 16, 2018 at 09:00:50AM +0100, Andre Przywara wrote:
> The Pine64-LTS board is a new board version of the Pine64, though
> actually it's a non-SoM version of the SoPine and its baseboard.
> In contrast to the original Pine64 it features LPDDR3 DRAM, an eMMC
> socket and a SPI flash chip for storing firmware (like U-Boot).
> Add it as a variant to the existing SoPine defconfig, since from a
> software point of view they are really not different.
> 
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>

I'm mostly fine with the changes you made, there's just one thing that
worries me a bit: the discoverability of the defconfig is pretty bad.

If you don't know it already, it's very difficult to see that the
defconfig you should use for the Pine64 LTS is the SoPine Baseboard
one.

Maybe we can add a symbolic link from the pine64_lts_defconfig to the
sopine one to make that obvious?

The bonus would be that if we ever need to split them for whatever
reason, we can do that without breaking each and every user setup.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180518/7477445f/attachment.sig>