[U-Boot] Please pull u-boot-marvell/master

[Stefan Roese]

Hi Chris,

On 17.05.2018 10:45, Chris Packham wrote:
> On Thu, May 17, 2018 at 8:36 PM Chris Packham <judge.packham at gmail.com>
> wrote:
> 
> 
>> On Thu, May 17, 2018 at 3:37 AM Tom Rini <trini at konsulko.com> wrote:
>>>
>>> On Wed, May 16, 2018 at 02:05:03PM +0200, Stefan Roese wrote:
>>>
>>>> Hi Tom,
>>>>
>>>> please pull the Kirkwood DT patches from Chris.
>>>>
>>>> Thanks,
>>>> Stefan
>>>>
>>>> The following changes since commit
> 0315d6959fdd9d2a4d89016c311e9c8c8d239a10:
>>>>
>>>>    ARM: mvebu: a38x: Add missing SPDX license identfier (2018-05-15
> 09:08:00 -0400)
>>>>
>>>> are available in the Git repository at:
>>>>
>>>>    git://www.denx.de/git/u-boot-marvell.git
>>>>
>>>> for you to fetch changes up to
> a7925926dc7f81fb5c137d2b4b7c6457694b1ac0:
>>>>
>>>>    ARM: kirkwood: Add device-tree for sheevaplug (2018-05-16 10:29:53
> +0200)
>>>>
>>>
>>> NAK.  With gcc-7.3
>>> (
> https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/7.3.0/)
>>> I get:
>>>         arm:  +   openrd_base openrd_ultimate openrd_client
>>> +(openrd_base,openrd_ultimate,openrd_client) u-boot-nodtb.bin exceeds
> file size limit:
>>> +(openrd_base,openrd_ultimate,openrd_client)   limit:  393216 bytes
>>> +(openrd_base)   actual: 395632 bytes
>>> +(openrd_base)   excess: 2416 bytes
>>> +(openrd_base,openrd_ultimate,openrd_client) make[1]: ***
> [Makefile:1014: u-boot-nodtb.bin] Error 1
>>> +(openrd_ultimate)   actual: 395664 bytes
>>> +(openrd_ultimate)   excess: 2448 bytes
>>> +(openrd_client)   actual: 395680 bytes
>>> +(openrd_client)   excess: 2464 bytes
>>>
>>> And I will be pushing those changes to finally switch travis over to
>>> gcc-7.3 soon (I had thought I had posted them a long while back so that
>>> I could have pulled them in right after v2018.05, but I forgot, so here
>>> we are now..).
> 
>> Odd I did get those failures initially but then I rebased against master
> and didn't see them again. I've been using gcc 7.3 throughout. At the time
> I assumed there were some other changes that had shrunk openrd enough for
> the dtb to fit. I see Stefan's patch to move the env location. Is that
> sufficient or do you want me to either drop openrd or find something that
> can be left out?
> 
> (gmail seems to have forgotten how to wrap quotes)
> 
> Sure enough my local branch with this series based on commit cc95535867f4
> ("bootm.c: Correct the flush_len used in bootm_load_os()") builds
> openrd_ultimate is fine. But if I rebase onto commit f2d0f5e7ab3b ("ARM:
> re-enable MVGBE for edminiv2") I see the build size errors. I'll do some
> digging. Chances are my other MVGBE patch has enabled something unwanted.

Thanks Chris. But perhaps its also good to increase the image size
for those openrd boards, since we most likely will increase the
size in the near future even further (addition of DM support etc).
Please see:

http://patchwork.ozlabs.org/patch/915135/

Thanks,
Stefan