[U-Boot] [PATCH v10 04/35] musb: sunxi: Add fifo config
Jagan Teki
jagan at amarulasolutions.com
Mon May 28 11:18:15 UTC 2018
Unlike other Allwinner SOC's H3/H5/V3s OTG support 4 endpoints
with relevant fifo configs, rest all have 5 endpoints.
So add the fifo configs and defer them based on driver_data.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Acked-by: Jun Nie <jun.nie at linaro.org>
---
drivers/usb/musb-new/sunxi.c | 70 ++++++++++++++++++++++++++++++++++++++++----
1 file changed, 65 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index 18218c68fe..77ee619a95 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -75,9 +75,14 @@
* From usbc/usbc.c
******************************************************************************/
+struct sunxi_musb_config {
+ struct musb_hdrc_config *config;
+};
+
struct sunxi_glue {
struct musb_host_data mdata;
struct sunxi_ccm_reg *ccm;
+ struct sunxi_musb_config *cfg;
struct device dev;
};
#define to_sunxi_glue(d) container_of(d, struct sunxi_glue, dev)
@@ -300,13 +305,52 @@ static const struct musb_platform_ops sunxi_musb_ops = {
#define SUNXI_MUSB_MAX_EP_NUM 6
#define SUNXI_MUSB_RAM_BITS 11
+static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = {
+ MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512),
+};
+
+/* H3/V3s OTG supports only 4 endpoints */
+#define SUNXI_MUSB_MAX_EP_NUM_H3 5
+
+static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] = {
+ MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512),
+};
+
static struct musb_hdrc_config musb_config = {
+ .fifo_cfg = sunxi_musb_mode_cfg,
+ .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg),
.multipoint = true,
.dyn_fifo = true,
.num_eps = SUNXI_MUSB_MAX_EP_NUM,
.ram_bits = SUNXI_MUSB_RAM_BITS,
};
+static struct musb_hdrc_config musb_config_h3 = {
+ .fifo_cfg = sunxi_musb_mode_cfg_h3,
+ .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_h3),
+ .multipoint = true,
+ .dyn_fifo = true,
+ .soft_con = true,
+ .num_eps = SUNXI_MUSB_MAX_EP_NUM_H3,
+ .ram_bits = SUNXI_MUSB_RAM_BITS,
+};
+
static int musb_usb_probe(struct udevice *dev)
{
struct sunxi_glue *glue = dev_get_priv(dev);
@@ -319,6 +363,10 @@ static int musb_usb_probe(struct udevice *dev)
if (!base)
return -EINVAL;
+ glue->cfg = (struct sunxi_musb_config *)dev_get_driver_data(dev);
+ if (!glue->cfg)
+ return -EINVAL;
+
glue->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (IS_ERR(glue->ccm))
return PTR_ERR(glue->ccm);
@@ -328,7 +376,7 @@ static int musb_usb_probe(struct udevice *dev)
memset(&pdata, 0, sizeof(pdata));
pdata.power = 250;
pdata.platform_ops = &sunxi_musb_ops;
- pdata.config = &musb_config;
+ pdata.config = glue->cfg->config;
#ifdef CONFIG_USB_MUSB_HOST
pdata.mode = MUSB_HOST;
@@ -368,11 +416,23 @@ static int musb_usb_remove(struct udevice *dev)
return 0;
}
+static const struct sunxi_musb_config sun4i_a10_cfg = {
+ .config = &musb_config,
+};
+
+static const struct sunxi_musb_config sun8i_h3_cfg = {
+ .config = &musb_config_h3,
+};
+
static const struct udevice_id sunxi_musb_ids[] = {
- { .compatible = "allwinner,sun4i-a10-musb" },
- { .compatible = "allwinner,sun6i-a31-musb" },
- { .compatible = "allwinner,sun8i-a33-musb" },
- { .compatible = "allwinner,sun8i-h3-musb" },
+ { .compatible = "allwinner,sun4i-a10-musb",
+ .data = (ulong)&sun4i_a10_cfg },
+ { .compatible = "allwinner,sun6i-a31-musb",
+ .data = (ulong)&sun4i_a10_cfg },
+ { .compatible = "allwinner,sun8i-a33-musb",
+ .data = (ulong)&sun4i_a10_cfg },
+ { .compatible = "allwinner,sun8i-h3-musb",
+ .data = (ulong)&sun8i_h3_cfg },
{ }
};
--
2.14.3
More information about the U-Boot
mailing list