[U-Boot] [PATCH v3 2/2] zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards

[Siva Durga Prasad Paladugu]

This patch adds qspi driver support for all ZynqMP ZCU102
boards.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
---
Changes for v3:
- Changed as per latest changes in 1/2

Changes for v2:
- Rebased on top of latest master and enabled qspi for
  all zcu102 boards.
---
 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 5 +++++
 configs/xilinx_zynqmp_zcu102_revA_defconfig   | 5 +++++
 configs/xilinx_zynqmp_zcu102_revB_defconfig   | 5 +++++
 3 files changed, 15 insertions(+)

diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
index 68da9dc..51f4669 100644
--- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
@@ -64,6 +65,7 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -87,6 +89,9 @@ CONFIG_DEBUG_UART_BASE=0xff000000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ZYNQ_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig
index 2adba61..2ae1a0b 100644
--- a/configs/xilinx_zynqmp_zcu102_revA_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
@@ -64,6 +65,7 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -87,6 +89,9 @@ CONFIG_DEBUG_UART_BASE=0xff000000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ZYNQ_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig
index 2310fa8..6f79a68 100644
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_TIME=y
@@ -64,6 +65,7 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_MACRONIX=y
@@ -87,6 +89,9 @@ CONFIG_DEBUG_UART_BASE=0xff000000
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ZYNQ_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.