[U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow

[Jorge Ramirez-Ortiz]

On 05/28/2018 11:07 PM, Jorge Ramirez-Ortiz wrote:
>> Jorge, I just sent you a fix. can you test it and if it works I'll
>> push it upstream.
>
> yes I can see the console now so that fix is good.
>
> however there must be some other regression lurking because the system 
> wont boot a kernel from the SD card 

sorry forgot the trace.
I think you might have fixed this one as well Ramon (I remember you 
mentioning it in some other thread?)

U-Boot 2018.05-00430-g5ce9aca (May 28 2018 - 23:09:02) [15/592]
Qualcomm-DragonBoard 820C

DRAM:  3 GiB
PSCI:  v1.0
MMC:   sdhci at 74a4900: 0
In:    serial at 75b0000
Out:   serial at 75b0000
Err:   serial at 75b0000
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0
Card did not respond to voltage select! <---------------