[U-Boot] [U-Boot,v2,4/7] mach-snapdragon: Fix UART clock flow

[Ramon Fried]

On Tue, May 29, 2018, 12:11 AM Jorge Ramirez-Ortiz
<jramirez at baylibre.com> wrote:
>
> On 05/28/2018 11:07 PM, Jorge Ramirez-Ortiz wrote:
>
> Jorge, I just sent you a fix. can you test it and if it works I'll
> push it upstream.
>
>
> yes I can see the console now so that fix is good.
>
> however there must be some other regression lurking because the system wont boot a kernel from the SD card
>
Sorry, I don't recall seeing this ever, perhaps the regression is
caused by another patch ?
are you sure it's from the latest uart fixes ? can you bisect ?
Thanks,
Ramon.
>
> sorry forgot the trace.
> I think you might have fixed this one as well Ramon (I remember you mentioning it in some other thread?)
>
> U-Boot 2018.05-00430-g5ce9aca (May 28 2018 - 23:09:02)                                                                                                                                       [15/592]
> Qualcomm-DragonBoard 820C
>
> DRAM:  3 GiB
> PSCI:  v1.0
> MMC:   sdhci at 74a4900: 0
> In:    serial at 75b0000
> Out:   serial at 75b0000
> Err:   serial at 75b0000
> Net:   Net Initialization Skipped
> No ethernet found.
> Hit any key to stop autoboot:  0
> Card did not respond to voltage select! <---------------
>