[U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux

[Richard Weinberger]

Otto,

Am Freitag, 18. Mai 2018, 23:02:17 CEST schrieb Otto Blom:
> Hallo Heiko & Richard !
> 
> Turns out the len and out_len do not match, much like you suspected.
> Out_len is 2 bytes short (4094 vs 4096) See log below
> 
> UBIFS DBG tnc: search key (5725, data, 124)
> UBIFS DBG tnc: found 1, lvl 0, n 2
> UBIFS DBG tnc: LEB 566:61864, key (5725, data, 124)
> UBIFS DBG io: LEB 566:61864, data node, length 3635
> UBIFS DBG tnc: search key (5725, data, 125)
> UBIFS DBG tnc: found 1, lvl 0, n 3
> UBIFS DBG tnc: LEB 566:65504, key (5725, data, 125)
> UBIFS DBG io: LEB 566:65504, data node, length 3411
> UBIFS DBG tnc: search key (5725, data, 126)
> UBIFS DBG tnc: found 1, lvl 0, n 4
> UBIFS DBG tnc: LEB 566:68920, key (5725, data, 126)
> UBIFS DBG io: LEB 566:68920, data node, length 3041
> UBIFS DBG tnc: search key (5725, data, 127)
> UBIFS DBG tnc: found 1, lvl 0, n 5
> UBIFS DBG tnc: LEB 566:71968, key (5725, data, 127)
> UBIFS DBG io: LEB 566:71968, data node, length 4144
> UBIFS DBG tnc: search key (5725, data, 128)
> UBIFS DBG tnc: found 1, lvl 0, n 6
> UBIFS DBG tnc: LEB 566:76112, key (5725, data, 128)
> UBIFS DBG io: LEB 566:76112, data node, length 3818
> UBIFS DBG tnc: search key (5725, data, 129)
> UBIFS DBG tnc: found 1, lvl 0, n 7
> UBIFS DBG tnc: LEB 566:79936, key (5725, data, 129)
> UBIFS DBG io: LEB 566:79936, data node, length 4061
> UBIFS DBG tnc: search key (5725, data, 130)
> UBIFS DBG io: LEB 560:17120, indexing node, length 188
> UBIFS DBG tnc: LEB 560:17120, level 0, 8 branch
> UBIFS DBG tnc: found 1, lvl 0, n 0
> UBIFS DBG tnc: LEB 566:84000, key (5725, data, 130)
> UBIFS DBG io: LEB 566:84000, data node, length 3212
> UBIFS DBG tnc: search key (5725, data, 131)
> UBIFS DBG tnc: found 1, lvl 0, n 1
> UBIFS DBG tnc: LEB 566:87216, key (5725, data, 131)
> UBIFS DBG io: LEB 566:87216, data node, length 3121
> ubifs_decompress RC: 0 len: 4096  out_len: 4094
> UBIFS error (ubi0:0 pid 0): read_block: bad data node (block 131, inode 5725)
>         magic          0x6101831
>         crc            0x2503e06e
>         node_type      1 (data node)
>         group_type     0 (no node group)
>         sqnum          59095
>         len            3121
>         key            (5725, data, 131)
>         size           4096
>         compr_typ      1
>         data size      3073
>         data:
> UBIFS error (ubi0:0 pid 0): do_readpage: cannot read page 131 of inode
> 5725, error -22
> Error reading file '/boot/Image'

This is U-Boot, right?
 
> 
> If I write the file system in 4.14 and attempt to mount it on 4.9 I get
> 
> root at bronte2:~# ubiattach /dev/ubi_ctrl -p /dev/mtd0 -d 0  #Create /dev/ubi8
> [   39.212876] ubi0 error: ubi_attach: PEB 51 contains corrupted VID
> header, and the data does not contain all 0xFF
> [   39.222999] ubi0 error: ubi_attach: this may be a non-UBI PEB or a
> severe VID header corruption which requires manual inspection
> [   39.234526] Volume identifier header dump:
> [   39.238601]  magic     55424921
> [   39.241725]  version   1
> [   39.244232]  vol_type  1
> [   39.246758]  copy_flag 0
> [   39.249278]  compat    0
> [   39.251783]  vol_id    0
> [   39.254311]  lnum      49
> [   39.256914]  data_size 0
> [   39.259429]  used_ebs  0
> [   39.261954]  data_pad  0
> [   39.264464]  sqnum     0
> [   39.266986]  hdr_crc   9a7266c9
> [   39.270108] Volume identifier header hexdump:
> [   39.274470] hexdump of PEB 51 offset 4096, length 126976[
> 39.871671] ubi0 error: ubi_attach: 1 PEBs are corrupted and preserved
> [   39.878132] Corrupted PEBs are: 51
> [   39.889469] UBI assert failed in ubi_wl_init at 1666 (pid 2455)

This makes no sense at all since the failure happens on a layer below, UBI.
attach is also not mount.

> 
> Which is the same error I get if I try to mount the file system in u-boot 2018.1
> 
> Also, If I attempt to read a file that was written using 4.14 running
> 4.9 Linux I get the same error that 2018.1 U-boot reported, except I
> also get the hexdump. See below
> 
> root at bronte2:~# cp /mnt/ubifs2/boot/Image /dev/null
> [  871.157694] UBIFS error (ubi1:0 pid 2566): do_readpage: bad data
> node (block 131, inode 5725)
> [  871.166166]  magic          0x6101831
> [  871.169812]  crc            0x2503e06e
> [  871.173527]  node_type      1 (data node)
> [  871.177527]  group_type     0 (no node group)
> [  871.181870]  sqnum          59095
> [  871.185157]  len            3121
> [  871.188362]  key            (5725, data, 131)
> [  871.192709]  size           4096
> [  871.195909]  compr_typ      1
> [  871.198876]  data size      3073
> [  871.202080]  data:

Hmmm, how and where did you create that filesystem?
Can you share it?
This should definitely work.

Thanks,
//richard