[U-Boot] [PATCH v2 1/2] ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled

[Stefan Roese]

On 30.05.2018 10:14, Chris Packham wrote:
> The mach/config.h file would helpfully define CONFIG_SYS_I2C and
> CONFIG_SYS_I2C_MVTWSI if CONFIG_CMD_I2C was defined by the board. This
> conflicts with the way DM_I2C works. As a transitional measure don't
> automatically define these if CONFIG_DM_I2C is defined. It should be
> possible to remove this once all kirkwood boards are migrated to DM.
> 
> Signed-off-by: Chris Packham <judge.packham at gmail.com>
> ---
> 
> Changes in v2: None

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan