[U-Boot] [PATCH v3] arm64: zynqmp: Setup MMU map for DDR at run time

Michal Simek michal.simek at xilinx.com
Thu May 10 08:26:47 UTC 2018


From: Nitin Jain <nitin.jain at xilinx.com>

This patch fills the MMU map for DDR at run time based on information read
from Device Tree or automatically detected from static configuration.

The patch is needed because for systems which has for example 1GB of memory
but MMU map is 2GB there could be spurious accesses which was seen in past
when mapping is not fitting with actual memory installed.

Signed-off-by: Nitin Jain <nitin.jain at xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v3:
- Fix commit message
- Fix comment in mem_map_fill

Changes in v2:
- Fix and extended commit description (asked-by: agraf)

 arch/arm/cpu/armv8/zynqmp/cpu.c              | 84 ++++++++++++--------
 arch/arm/include/asm/arch-zynqmp/sys_proto.h |  2 +-
 board/xilinx/zynqmp/zynqmp.c                 | 22 ++++-
 3 files changed, 74 insertions(+), 34 deletions(-)

diff --git a/arch/arm/cpu/armv8/zynqmp/cpu.c b/arch/arm/cpu/armv8/zynqmp/cpu.c
index eb0db46065f3..2748d65d14b4 100644
--- a/arch/arm/cpu/armv8/zynqmp/cpu.c
+++ b/arch/arm/cpu/armv8/zynqmp/cpu.c
@@ -15,16 +15,28 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static struct mm_region zynqmp_mem_map[] = {
+/*
+ * Number of filled static entries and also the first empty
+ * slot in zynqmp_mem_map.
+ */
+#define ZYNQMP_MEM_MAP_USED	4
+
 #if !defined(CONFIG_ZYNQMP_NO_DDR)
-	{
-		.virt = 0x0UL,
-		.phys = 0x0UL,
-		.size = 0x80000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-			 PTE_BLOCK_INNER_SHARE
-	},
+#define DRAM_BANKS CONFIG_NR_DRAM_BANKS
+#else
+#define DRAM_BANKS 0
 #endif
+
+#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+#define TCM_MAP 1
+#else
+#define TCM_MAP 0
+#endif
+
+/* +1 is end of list which needs to be empty */
+#define ZYNQMP_MEM_MAP_MAX (ZYNQMP_MEM_MAP_USED + DRAM_BANKS + TCM_MAP + 1)
+
+static struct mm_region zynqmp_mem_map[ZYNQMP_MEM_MAP_MAX] = {
 	{
 		.virt = 0x80000000UL,
 		.phys = 0x80000000UL,
@@ -32,8 +44,7 @@ static struct mm_region zynqmp_mem_map[] = {
 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
-	},
-	{
+	}, {
 		.virt = 0xf8000000UL,
 		.phys = 0xf8000000UL,
 		.size = 0x07e00000UL,
@@ -41,42 +52,51 @@ static struct mm_region zynqmp_mem_map[] = {
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	}, {
-#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
-		.virt = 0xffe00000UL,
-		.phys = 0xffe00000UL,
-		.size = 0x00200000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-			 PTE_BLOCK_INNER_SHARE
-	}, {
-#endif
 		.virt = 0x400000000UL,
 		.phys = 0x400000000UL,
 		.size = 0x400000000UL,
 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
-	},
-#if !defined(CONFIG_ZYNQMP_NO_DDR)
-	{
-		.virt = 0x800000000UL,
-		.phys = 0x800000000UL,
-		.size = 0x800000000UL,
-		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
-			 PTE_BLOCK_INNER_SHARE
-	},
-#endif
-	{
+	}, {
 		.virt = 0x1000000000UL,
 		.phys = 0x1000000000UL,
 		.size = 0xf000000000UL,
 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
-	}, {
-		/* List terminator */
-		0,
 	}
 };
+
+void mem_map_fill(void)
+{
+	int banks = ZYNQMP_MEM_MAP_USED;
+
+#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+	zynqmp_mem_map[banks].virt = 0xffe00000UL;
+	zynqmp_mem_map[banks].phys = 0xffe00000UL;
+	zynqmp_mem_map[banks].size = 0x00200000UL;
+	zynqmp_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+				      PTE_BLOCK_INNER_SHARE;
+	banks = banks + 1;
+#endif
+
+#if !defined(CONFIG_ZYNQMP_NO_DDR)
+	for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		/* Zero size means no more DDR that's this is end */
+		if (!gd->bd->bi_dram[i].size)
+			break;
+
+		zynqmp_mem_map[banks].virt = gd->bd->bi_dram[i].start;
+		zynqmp_mem_map[banks].phys = gd->bd->bi_dram[i].start;
+		zynqmp_mem_map[banks].size = gd->bd->bi_dram[i].size;
+		zynqmp_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+					      PTE_BLOCK_INNER_SHARE;
+		banks = banks + 1;
+	}
+#endif
+}
+
 struct mm_region *mem_map = zynqmp_mem_map;
 
 u64 get_page_table_size(void)
diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
index d1db4c38bb99..6056bc6c0c56 100644
--- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
@@ -45,7 +45,7 @@ int invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, u32 arg3,
 	       u32 *ret_payload);
 
 void initialize_tcm(bool mode);
-
+void mem_map_fill(void);
 int chip_id(unsigned char id);
 
 #endif /* _ASM_ARCH_SYS_PROTO_H */
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 4c6f29995a24..911cd52e0c40 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -405,7 +405,15 @@ unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
 #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
 int dram_init_banksize(void)
 {
-	return fdtdec_setup_memory_banksize();
+	int ret;
+
+	ret = fdtdec_setup_memory_banksize();
+	if (ret)
+		return ret;
+
+	mem_map_fill();
+
+	return 0;
 }
 
 int dram_init(void)
@@ -416,6 +424,18 @@ int dram_init(void)
 	return 0;
 }
 #else
+int dram_init_banksize(void)
+{
+#if defined(CONFIG_NR_DRAM_BANKS)
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size = get_effective_memsize();
+#endif
+
+	mem_map_fill();
+
+	return 0;
+}
+
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
-- 
2.17.0



More information about the U-Boot mailing list