[U-Boot] [PATCH 3/6] usb: dwc3: Add generic DWC3 glue logic driver
Michal Simek
monstr at monstr.eu
Thu May 17 06:27:36 UTC 2018
On 16.5.2018 16:41, Marek Vasut wrote:
> On 05/16/2018 04:26 PM, Michal Simek wrote:
>> By enabling BLK by default this is the next driver which needs to get
>> support for DM_USB. Adding generic DWC3 glue logic which only
>> parse nodes and read device mode. Based on it probe proper
>> host/peripheral DWC3 drivers for it.
>>
>> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
>> ---
>>
>> drivers/usb/dwc3/Kconfig | 6 ++
>> drivers/usb/dwc3/Makefile | 1 +
>> drivers/usb/dwc3/dwc3-generic.c | 165 ++++++++++++++++++++++++++++++++
>> 3 files changed, 172 insertions(+)
>> create mode 100644 drivers/usb/dwc3/dwc3-generic.c
>>
>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>> index ae7fc1c6304d..943b7630eba4 100644
>> --- a/drivers/usb/dwc3/Kconfig
>> +++ b/drivers/usb/dwc3/Kconfig
>> @@ -37,6 +37,12 @@ config USB_DWC3_OMAP
>>
>> Say 'Y' here if you have one such device
>>
>> +config USB_DWC3_GENERIC
>> + bool "Xilinx ZynqMP and similar Platforms"
>> + depends on DM_USB && USB_DWC3
>> + help
>> + Some platforms can reuse this DWC3 generic implementation.
>> +
>> config USB_DWC3_UNIPHIER
>> bool "DesignWare USB3 Host Support on UniPhier Platforms"
>> depends on ARCH_UNIPHIER && USB_XHCI_DWC3
>> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
>> index cd18b8d9ec02..60b5515a67da 100644
>> --- a/drivers/usb/dwc3/Makefile
>> +++ b/drivers/usb/dwc3/Makefile
>> @@ -7,6 +7,7 @@ dwc3-y := core.o
>> obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o
>>
>> obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
>> +obj-$(CONFIG_USB_DWC3_GENERIC) += dwc3-generic.o
>> obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o
>> obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o
>> obj-$(CONFIG_USB_DWC3_PHY_SAMSUNG) += samsung_usb_phy.o
>> diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
>> new file mode 100644
>> index 000000000000..7dd2555c2042
>> --- /dev/null
>> +++ b/drivers/usb/dwc3/dwc3-generic.c
>> @@ -0,0 +1,165 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Generic DWC3 Glue layer
>> + *
>> + * Copyright (C) 2016 - 2018 Xilinx, Inc.
>> + *
>> + * Based on dwc3-omap.c.
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <dm/device-internal.h>
>> +#include <dm/lists.h>
>> +#include <linux/usb/otg.h>
>> +#include <linux/compat.h>
>> +#include <linux/usb/ch9.h>
>> +#include <linux/usb/gadget.h>
>> +#include <malloc.h>
>> +#include <usb.h>
>> +#include "core.h"
>> +#include "gadget.h"
>> +#include "linux-compat.h"
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +int usb_gadget_handle_interrupts(int index)
>> +{
>> + struct dwc3 *priv;
>> + struct udevice *dev;
>> + int ret;
>> +
>> + ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev);
>> + if (!dev || ret) {
>> + pr_err("No USB device found\n");
>> + return -ENODEV;
>> + }
>> +
>> + priv = dev_get_priv(dev);
>> +
>> + dwc3_gadget_uboot_handle_interrupt(priv);
>> +
>> + return 0;
>> +}
>> +
>> +static int dwc3_generic_peripheral_probe(struct udevice *dev)
>> +{
>> + struct dwc3 *priv = dev_get_priv(dev);
>> +
>> + return dwc3_init(priv);
>> +}
>> +
>> +static int dwc3_generic_peripheral_remove(struct udevice *dev)
>> +{
>> + struct dwc3 *priv = dev_get_priv(dev);
>> +
>> + dwc3_remove(priv);
>> +
>> + return 0;
>> +}
>> +
>> +static int dwc3_generic_peripheral_ofdata_to_platdata(struct udevice *dev)
>> +{
>> + struct dwc3 *priv = dev_get_priv(dev);
>> + int node = dev_of_offset(dev);
>> +
>> + priv->regs = (void *)devfdt_get_addr(dev);
>> + priv->regs += DWC3_GLOBALS_REGS_START;
>> +
>> + priv->maximum_speed = usb_get_maximum_speed(node);
>> + if (priv->maximum_speed == USB_SPEED_UNKNOWN) {
>> + pr_err("Invalid usb maximum speed\n");
>> + return -ENODEV;
>> + }
>> +
>> + priv->dr_mode = usb_get_dr_mode(node);
>> + if (priv->dr_mode == USB_DR_MODE_UNKNOWN) {
>> + pr_err("Invalid usb mode setup\n");
>> + return -ENODEV;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int dwc3_generic_peripheral_bind(struct udevice *dev)
>> +{
>> + return device_probe(dev);
>> +}
>> +
>> +U_BOOT_DRIVER(dwc3_generic_peripheral) = {
>> + .name = "dwc3-generic-peripheral",
>> + .id = UCLASS_USB_DEV_GENERIC,
>> + .ofdata_to_platdata = dwc3_generic_peripheral_ofdata_to_platdata,
>> + .probe = dwc3_generic_peripheral_probe,
>> + .remove = dwc3_generic_peripheral_remove,
>> + .bind = dwc3_generic_peripheral_bind,
>> + .platdata_auto_alloc_size = sizeof(struct usb_platdata),
>> + .priv_auto_alloc_size = sizeof(struct dwc3),
>> + .flags = DM_FLAG_ALLOC_PRIV_DMA,
>> +};
>> +
>> +static int dwc3_generic_bind(struct udevice *parent)
>> +{
>> + const void *fdt = gd->fdt_blob;
>> + int node;
>> + int ret;
>> +
>> + for (node = fdt_first_subnode(fdt, dev_of_offset(parent)); node > 0;
>> + node = fdt_next_subnode(fdt, node)) {
>> + const char *name = fdt_get_name(fdt, node, NULL);
>> + enum usb_dr_mode dr_mode;
>> + struct udevice *dev;
>> +
>> + debug("%s: subnode name: %s\n", __func__, name);
>> + if (strncmp(name, "dwc3@", 4))
>> + continue;
>> +
>> + dr_mode = usb_get_dr_mode(node);
>> +
>> + switch (dr_mode) {
>> + case USB_DR_MODE_PERIPHERAL:
>> + case USB_DR_MODE_OTG:
>> + debug("%s: dr_mode: OTG or Peripheral\n", __func__);
>> + ret = device_bind_driver_to_node(parent,
>> + "dwc3-generic-peripheral",
>> + name,
>> + offset_to_ofnode(node),
>> + &dev);
>> + if (ret) {
>> + debug("%s: not able to bind usb device mode\n",
>> + __func__);
>> + return ret;
>> + }
>> + break;
>> + case USB_DR_MODE_HOST:
>> + debug("%s: dr_mode: HOST\n", __func__);
>> + ret = device_bind_driver_to_node(parent,
>> + "dwc3-generic-host",
>> + name,
>> + offset_to_ofnode(node),
>> + &dev);
>
> Can you somehow improve this indent hell ?
Unfortunately this is correct style. I am happy to break 80 char limit
which will clean this up. Just let me know your preference.
Thanks,
Michal
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180517/3e3ba753/attachment.sig>
More information about the U-Boot
mailing list