[U-Boot] [PATCH 1/2] mvebu: neta: align DMA buffers
Baruch Siach
baruch at tkos.co.il
Mon May 28 06:33:54 UTC 2018
From: Jon Nettleton <jon at solid-run.com>
This makes sure the DMA buffers are properly aligned for the
hardware.
Signed-off-by: Jon Nettleton <jon at solid-run.com>
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
drivers/net/mvneta.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
index 7036b517b445..fc16986a00d6 100644
--- a/drivers/net/mvneta.c
+++ b/drivers/net/mvneta.c
@@ -1025,6 +1025,9 @@ static int mvneta_rxq_init(struct mvneta_port *pp,
if (rxq->descs == NULL)
return -ENOMEM;
+ BUG_ON(rxq->descs !=
+ PTR_ALIGN(rxq->descs, ARCH_DMA_MINALIGN));
+
rxq->last_desc = rxq->size - 1;
/* Set Rx descriptors queue starting address */
@@ -1061,6 +1064,9 @@ static int mvneta_txq_init(struct mvneta_port *pp,
if (txq->descs == NULL)
return -ENOMEM;
+ BUG_ON(txq->descs !=
+ PTR_ALIGN(txq->descs, ARCH_DMA_MINALIGN));
+
txq->last_desc = txq->size - 1;
/* Set maximum bandwidth for enabled TXQs */
@@ -1694,18 +1700,20 @@ static int mvneta_probe(struct udevice *dev)
* be active. Make this area DMA safe by disabling the D-cache
*/
if (!buffer_loc.tx_descs) {
+ u32 size;
+
/* Align buffer area for descs and rx_buffers to 1MiB */
bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
mmu_set_region_dcache_behaviour((phys_addr_t)bd_space, BD_SPACE,
DCACHE_OFF);
buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space;
+ size = roundup(MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc),
+ ARCH_DMA_MINALIGN);
buffer_loc.rx_descs = (struct mvneta_rx_desc *)
- ((phys_addr_t)bd_space +
- MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc));
- buffer_loc.rx_buffers = (phys_addr_t)
- (bd_space +
- MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) +
- MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc));
+ ((phys_addr_t)bd_space + size);
+ size += roundup(MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc),
+ ARCH_DMA_MINALIGN);
+ buffer_loc.rx_buffers = (phys_addr_t)(bd_space + size);
}
pp->base = (void __iomem *)pdata->iobase;
--
2.17.0
More information about the U-Boot
mailing list